aboutsummaryrefslogtreecommitdiffstats
path: root/test/test_nat44_ed.py
AgeCommit message (Collapse)AuthorFilesLines
2022-03-04ip: rate-limit the sending of ICMP error messagesNeale Ranns1-4/+1
Type: improvement For error conditions, such as TTL expired, dest unreach, etc, Rate limit the sending of ICMP error messages. The rate limiting is done based on src,dst IP address of the received packet. the rate limit has been chosen, somewhat arbitrarily, to be 1e-3. This is the same limit as the ARP throttling. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I4a0b791cde8c941a9bf37de6aa5da56779d3cef4
2022-02-21tests: add enhanced packet counter verificationKlement Sekera1-26/+53
Add support for inline packet counter verification to send_and_* functions. Diff dictionary is a dictionary of dictionaries of interesting stats: diff_dictionary = { "err" : { '/error/counter1' : 4, }, sw_if_index1 : { '/stat/segment/counter1' : 5, '/stat/segment/counter2' : 6, }, sw_if_index2 : { '/stat/segment/counter1' : 7, }, } It describes a per sw-if-index diffset, where each key is stat segment path and value is the expected change for that counter for sw-if-index. Special case string "err" is used for error counters. This then allows more precise packet counter verification by first defining a "zero" dictionary, e.g. for ED NAT: cls.no_diff = StatsDiff({ pg.sw_if_index: { '/nat44-ed/in2out/fastpath/tcp': 0, '/nat44-ed/in2out/fastpath/udp': 0, '/nat44-ed/in2out/fastpath/icmp': 0, '/nat44-ed/in2out/fastpath/drops': 0, '/nat44-ed/in2out/slowpath/tcp': 0, '/nat44-ed/in2out/slowpath/udp': 0, '/nat44-ed/in2out/slowpath/icmp': 0, '/nat44-ed/in2out/slowpath/drops': 0, '/nat44-ed/in2out/fastpath/tcp': 0, '/nat44-ed/in2out/fastpath/udp': 0, '/nat44-ed/in2out/fastpath/icmp': 0, '/nat44-ed/in2out/fastpath/drops': 0, '/nat44-ed/in2out/slowpath/tcp': 0, '/nat44-ed/in2out/slowpath/udp': 0, '/nat44-ed/in2out/slowpath/icmp': 0, '/nat44-ed/in2out/slowpath/drops': 0, } for pg in cls.pg_interfaces }) and then to specify only changed counters directly when calling one of send_and_* functions: self.send_and_assert_no_replies( self.pg0, pkts, msg="i2o pkts", stats_diff=self.no_diff | { "err": { '/err/nat44-ed-in2out-slowpath/out of ports': len(pkts), }, self.pg0.sw_if_index: { '/nat44-ed/in2out/slowpath/drops': len(pkts), }, } ) operator | is overloaded by StatsDiff class to perform a deep merge operation, so in above case, dictionaries for "err" and self.pg0.sw_if_index do not overwrite whole sub-dictionaries, rather the contents are merged, assuring that all the remaining counters are verified to be zero. Type: improvement Signed-off-by: Klement Sekera <klement.sekera@gmail.com> Change-Id: I2b87f7bd58a7d4b34ee72344e2f871b2f372e2d9
2022-01-24nat: TCP state tracking based on RFC 7857/RFC 6146Klement Sekera1-158/+462
Implement proper state machine based on above RFCs. ACKs to SYNs/FINs are no longer required/tracked. This is more friendly to peers and accounts for lost packets and retransmits. This change also means that all traffic is translated and forwarded while in transitory timeout, which helps delivering e.g. retransmitted FINs, FINACKs and other messages. Also support reopening a session in transitory timeout after seeing both FINs by seeing both SYNs again. This helps quick connection reestablishment if the peers want to. Type: improvement Signed-off-by: Klement Sekera <ksekera@cisco.com> Signed-off-by: Miklos Tirpak <miklos.tirpak@gmail.com> Change-Id: Ibf521c79463472db97e593bfa02b32b4a06dfd2a
2021-11-22nat: change nat44-ed test pool addressFilip Varga1-1/+1
NAT pool address overlaps with pg4 network 10.0.0.1/24 this is not desirable because of upcoming change [1]. This change uncovered configuration issue with hairpinning test that would fail because of already configured pg4 interface that shares subnet with nat pool address. Packets would incorectly end up in bad pg interface causing the test to fail. This patch changes nat pool address to 10.0.10.3 that doesn't belong to any of the subnets configured on pg interfaces in nat tests. [1] https://gerrit.fd.io/r/c/vpp/+/34441 Type: test Change-Id: I49e63dacbf0847116adbcf1954ff5defd833a657 Signed-off-by: Filip Varga <fivarga@cisco.com>
2021-11-22vlib: add virtual time supportBenoît Ganne1-6/+6
Type: feature Change-Id: Iabd76558e9c72ed8286cfeeb1fbaa4fde4832a90 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-11-10nat: api autoendian fixFilip Varga1-4/+4
Fixed bad use of macros for autoendian API calls and updated tests for the new API. Removed sw_if_index check macro because of ntol conversion. Changed REPLY_MACRO to REPLY_MACRO_END to fix ntohl conversions. Type: fix Change-Id: I878a07b3f80fe03179feab60f0abc662f408a2c8 Signed-off-by: Filip Varga <fivarga@cisco.com>
2021-10-20nat: enable skipped nat44-ed multi worker testsFilip Varga1-57/+0
Type: test Change-Id: I185725c0f94084d08c8514642a84a04da62398e1 Signed-off-by: Filip Varga <fivarga@cisco.com>
2021-10-14nat: static mappings in flow hashKlement Sekera1-9/+6
Put static mappings in flow hash, drop existing hash tables used for static mappings. Drop refcount variables and use hash table as a single point of truth. Allow creating a static mapping conflicting with dynamic mapping, which will take precedence after dynamic mapping is freed, so that the existing flow can finish transferring data. Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: Idfde8efabc09971be38921d4b0ca5ccf4e9fe412
2021-10-12Revert "nat: static mappings in flow hash"Ole Troan1-8/+10
This reverts commit 69b7599e4b061a8996205f0304232ede84cb70d4. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: If531b122ae5a9f91c2fe6eaa0da69922a91f16d3
2021-10-12nat: static mappings in flow hashKlement Sekera1-10/+8
Put static mappings in flow hash, drop existing hash tables used for static mappings. Drop refcount variables and use hash table as a single point of truth. Allow creating a static mapping conflicting with dynamic mapping, which will take precedence after dynamic mapping is freed, so that the existing flow can finish transferring data. Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: Ieeba691d83a83887d0a0baccd5f3832f66126096
2021-08-19nat: handle ED in2out ICMP errors with workersMatthew Smith1-0/+45
Type: fix With endpoint dependent NAT44, When there are multiple workers we look for a flow which matches the packet in order to figure out which worker should handle the packet. If the packet is an ICMP error, it may be associated with an existing flow by inspecting the L3/L4 headers that are included in the message payload. This was not being done for in2out packets in nat44_ed_get_in2out_worker_index(), so some packets which were related to an open session were not being associated with that session and were being passed to a different thread than the one where the session was created. Later on, when the packet was processed by the fast path in2out node, the L3/L4 headers in the payload are inspected and the fast path node finds the existing session. Since that session is owned by a different thread than the one the packet is being processed by, the in2out fast path node can potentially access the wrong session and/or memory adjacent to the session pool. This can cause a SEGV. Make nat44_ed_get_in2out_worker_index() look at the inner headers when processing an ICMP error. THis is already done in nat44_ed_get_out2in_worker_index() and in the fast path in2out node. Change-Id: Icdc1abebcbce452ee7be7cb23fc563e09bf575f2 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2021-08-17nat: fix counters increment for output featureAlexander Chernavin1-1/+1
Type: fix The NAT plugin stores packet counters and a counter represents a vector indexed by interface index. When an interface is assigned a NAT role, the counters are validated to be long enough for the given interface index. When a packet traverses NAT in2out and output feature is disabled, the appropriate counters are updated by the RX interface index. In this case, translation happens on the inside interface and its index was ensured to be valid in all of the counters during NAT role assignment. When a packet traverses NAT in2out and output feature is enabled, the appropriate counters are updated by the RX interface index too. In this case, translation happens on the outside interface and the packet could be received on any interface, even with no NAT role assigned. If that's the case and its index is greater than the greatest index validated in the counters, a new counter value will be written to memory that does not belong to the counter. As a result, a crash will occur at some point. With this change, use TX interface index to update the counters when output feature is enabled. TX interface is an actual interface where translation happens and its index is always valid in the counters. Signed-off-by: Alexander Chernavin <achernavin@netgate.com> Change-Id: I53a52af949fe96419e1b5fef4134ab4062198f51
2021-07-29nat: fix ICMP checksum validationKlement Sekera1-0/+44
Handle case where extra data is present in buffer which is not part of IP/ICMP headers. Type: fix Fixes: 05b5a5b3b4b04823776feed6403b5a99b2e06d76 Change-Id: Icfef811470056d38c60fc45cc302139ed7594385 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2021-07-19nat: harden ICMP handlingKlement Sekera1-0/+4
Verify that headers are not truncated and that checksums are valid. Correct checksum computation in translation code. Type: fix Change-Id: I6acfcec4661411f83c86b15aafac90cd4538c0b5 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2021-07-14nat: adding support for icmp-error msgFilip Varga1-0/+35
Extending tests. Type: test Change-Id: I98cc1d214ead10ac53fed34a1492d9b5f37975a2 Signed-off-by: Filip Varga <fivarga@cisco.com>
2021-07-14nat: refactoring NAT44ED cfg functionsFilip Varga1-11/+2
Refactored & fixed NAT44ED configuration functions used for handling interfaces and nodes. Type: refactor Signed-off-by: Filip Varga <fivarga@cisco.com> Change-Id: I6fbbb7f0fe35d572675997745d53290152987424
2021-06-22nat: don't drop packet with ttl=1 if output featureKlement Sekera1-0/+26
TTL was already decremented in ip4-rewrite so it's okay if it's 1. Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I587dc343737c15247eb62837a06d5e44c0d11acc
2021-05-18nat: refactor multiple vrf testsKlement Sekera1-25/+120
Replace VRF test testing multiple scenarios into more simpler tests to improve readability and ease of debugging. Type: refactor Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: Ibaad5328c73b401f52c5fe513dc0ed68ff3e3374
2021-05-13tests: move test source to vpp/testDave Wallace1-0/+3662
- Generate copyright year and version instead of using hard-coded data Type: refactor Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I6058f5025323b3aa483f5df4a2c4371e27b5914e