summaryrefslogtreecommitdiffstats
path: root/test/test_punt.py
AgeCommit message (Collapse)AuthorFilesLines
2022-03-04ip: rate-limit the sending of ICMP error messagesNeale Ranns1-2/+2
Type: improvement For error conditions, such as TTL expired, dest unreach, etc, Rate limit the sending of ICMP error messages. The rate limiting is done based on src,dst IP address of the received packet. the rate limit has been chosen, somewhat arbitrarily, to be 1e-3. This is the same limit as the ARP throttling. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I4a0b791cde8c941a9bf37de6aa5da56779d3cef4
2021-11-02build: remove unnecessary executable bitsRay Kinsella1-0/+0
Run 'find src -executable -type f', remove unnecessary executable bits from the source tree. Type: refactor Signed-off-by: Ray Kinsella <mdr@ashroe.eu> Change-Id: I070e22c8fb2ef8712bc3ea620727ee5ab3d9a9fb
2021-05-08tests: fix another race condition in punt testsDave Wallace1-5/+7
- Don't close the socket and don't stop receiving until after draining the existing data in the socket. Type: fix Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I38dfff4d6273eeddb5196f5cf2a60b580e1c93e6
2021-05-06tests: fix race condition in punt testsDave Wallace1-1/+1
Type: fix Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I6cb13e044bbb966cbb61802094e96220d3a0c951
2021-02-11tests: tag the tests that do not work with multi-worker configurationAndrew Yourtchenko1-0/+2
If the multi-worker default VPP configuration is triggered by setting VPP_WORKER_CONFIG="workers 2", some of the tests fail for various reasons. It's a substantial number, so this change marks all of the testsets that have this issue, such that they can be addressed later independently. Type: test Change-Id: I4f77196499edef3300afe7eabef9cbff91f794d3 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2021-01-07ipsec: Deprecated the old IPsec Tunnel interfaceNeale Ranns1-20/+25
Type: fix it's been 2 releases since it was marked deprecated. Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I0eba7ed607826ed0d00e7d2d8f9b27d09e8e9a6e
2020-05-15ikev2: add support for NAT traversalFilip Tehlar1-4/+1
Type: feature * initiator behind NAT supported * tested with static NAT mappings * works only with pre-configured tunnels The pre-configured tunnel has to be defined as follows: initiator (i) side: src=ip(i) dst=ip(r) responder (r) side: src=ip(r) dst=ip(nat) Change-Id: Ia9f79ddbbcc3f7dc8fde6bbeca2a433e3b784e94 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2020-02-26api: improve api string safetyJakub Grajciar1-0/+2
- Remove vl_api_from_api_string to prevent use of not nul-terminated strings. - Rename vl_api_from_api_to_vec -> vl_api_from_api_to_new_vec to imply a new vector is created. NOT nul terminated. - Add vl_api_from_api_to_new_c_string. Returns nul terminated string in a new vector. - Add vl_api_c_string_to_api_string. Convert nul terminated string to vl_api_string_t - Add vl_api_vec_to_api_string. Convert NON nul terminated vector to vl_api_string_t Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: Iadd59b612c0d960a34ad0dd07a9d17f56435c6ea Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2020-02-25vlib: Punt reason allocation listener enable/disable callbackNeale Ranns1-24/+36
Type: improvement allow clients that allocate punt reasons to pass a callback function that is invoked when the first/last client registers to use/listen on that punt reason. This allows the client to perform some necessary configs that might not otherwise be enabled. IPSec uses this callback to register the ESP proto and UDP handling nodes, that would not otherwise be enabled unless a tunnel was present. Change-Id: I9759349903f21ffeeb253d4271e619e6bf46054b Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-12-17ip: Protocol Independent IP NeighborsNeale Ranns1-1/+0
Type: feature - ip-neighbour: generic neighbour handling; APIs, DBs, event handling, aging - arp: ARP protocol implementation - ip6-nd; IPv6 neighbor discovery implementation; separate ND, MLD, RA - ip6-link; manage link-local addresses - l2-arp-term; events separated from IP neighbours, since they are not the same. vnet retains just enough education to perform ND/ARP packet construction. arp and ip6-nd to be moved to plugins soon. Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-11-08ipsec: remove dedicated IPSec tunnelsNeale Ranns1-7/+13
APIs for dedicated IPSec tunnels will remain in this release and are used to programme the IPIP tunnel protect. APIs will be removed in a future release. see: https://wiki.fd.io/view/VPP/IPSec Type: feature Change-Id: I0f01f597946fdd15dfa5cae3643104d5a9c83089 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-11-07tests: make threads in punt tests join when finishedAndrew Yourtchenko1-8/+23
The 42693521f6046997133c8f63bcfc9d615d96f69d added the timeout to the child process join + print the name of the offending child process. Upon testing the issue furher, appeared the offenders were always the same - punt tests. The processes running them were stuck trying to acquire lock, even if all the user-accessible execution has finished. Some searching revealed that one needs to tread carefully when dealing with Thread and Multiprocessing at the same time. punt tests used threads but did not call thread.join. Somehow it worked in some cases but not the others. This fix makes the threads exit cleanly - which also makes the timeouts waiting for the process to join disappear. Type: test Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> Change-Id: I05d99bb48a9987544bbfe45118755c09d7867aa0 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2019-11-05misc: Fix python scripts shebang lineRenato Botelho do Couto1-1/+1
Type: fix Since CentOS 8, RPM build script doesn't accept '#!/usr/bin/env python' as a valid shebang line. It requires scripts to explicitly chose between python2 or python3. Change all to use python3 as suggested by Paul Vinciguerra. Depends-On: https://gerrit.fd.io/r/23170 Signed-off-by: Renato Botelho do Couto <renato@netgate.com> Change-Id: Ie72af9f60fd0609e07f05b70f8d96e738b2754d1
2019-10-18ip: add python3 support to punt testsOle Troan1-77/+50
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Ib918d11fb3278a25a92006dcfe3c7c484e7b33ea
2019-07-31tests: disable pg capture before enabling itAndrew Yourtchenko1-1/+5
In a lot of places within the unit tests pg_start() starts the capture with an already existing capture running for the same test. If the pcap file already exists, then it is renamed and there is no problem. However, there is a potential for race if the previous pg_start() has enabled the capture, but the check for renaming it happened just slightly earlier than the first packet has arrived. Then a second call to pg_start() will hit a check that a file exists, and will cause an error. This is especially visible when running the tests in parallel due to increased load. Solution: disable the capture before enabling it. This will flush the aready running capture and eliminate the race. The additional delay that flushing of the pcap creates has exposed several other race conditions: NAT tests: Some of the NAT reassembly tests verify that the entries were added to the reassembly data structures, but do so by comparing the quantities of entries. With the default timeout being 2s, some of the entries might timeout, resulting in a bogus test failure. Solution: Bump the timeout to 20s for the affected tests. Punt tests: nr_packets == 3 makes test intermittently fail, nr_packets > 3 make it reliably fail, and nr_packets = 2 works Solution: set nr_packets == 2 for the time being IGMP tests: the leave-group calls get a spurious packet from the time the new groups were configured Solution: add 1 second delay before starting to delete the groups Type: test Change-Id: I931182a7b2860cf670e030ee7da8038f6e87356d Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2019-07-12ip ipsec: Remove IPSec SPI-0 punt reasonNeale Ranns1-26/+32
Type: fix There's no call for an SPI-0 punt reason with UDP encap, since it's only with UDP encap that the ambiguity between IKE or IPSEC occurs (and SPI=0 determines IKE). Enhance the punt API to dum ponly the reason requested, so a client can use this as a get-ID API Change-Id: I5c6d72b03885e88c489117677e72f1ef5da90dfc Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-19tests: send packet output to log - test_punt.pyPaul Vinciguerra1-1/+0
Move output to log.txt. 11:51:58,111 Verifying against 3 packets in verify_udp_pkts. 11:51:58,111 ###[ Ethernet ]### dst = 02:fe:4c:62:06:e5 src = 02:01:00:00:ff:02 type = 0x800 \###[ IP ]### version = 4 ihl = 5 tos = 0x0 len = 128 ... Type: test Change-Id: Iebaf34c2ac16e7fa8dffbdeadf18ab6c5f4c7494 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-18fib: fib api updatesNeale Ranns1-2/+1
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-14ipsec: Correctly rewind the buffer to the IP header when punting UDP ↵Neale Ranns1-13/+40
encapped SPI-0 packets Type: fix Fixes: b71fa75d48 Change-Id: I2d81b373f7659e702759939c096b315afa36f621 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-04Punt: specify packets by IP protocol TypeNeale Ranns1-3/+160
Change-Id: I0c2d6fccd95146e52bb88ca4a6e84554d5d6b2ed Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-05-28Punt: socket register for exception dispatched/punted packets based on reasonNeale Ranns1-308/+500
- add to the Punt API to allow different descriptions of the desired packets: UDP or exceptions - move the punt nodes into punt_node.c - improve tests (test that the correct packets are punted to the registered socket) Change-Id: I1a133dec88106874993cba1f5a439cd26b2fef72 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-05-22stats: support multiple works for error countersOle Troan1-1/+1
The current code only allowed access to the main thread error counters. That is not so useful for a multi worker instance. No return a vector indexed by thread of counter_t values. Type: fix Change-Id: Ie322c8889c0c8175e1116e71de04a2cf453b9ed7 Signed-off-by: Ole Troan <ot@cisco.com>
2019-05-17Tests: Raise exception if API cli_inband command fails.Paul Vinciguerra1-2/+0
* Configure tests to raise exception if cli_inband fails. * Fix failing tests. * Add filename detail to pcap.stat clib_error_return for debugging. Note: this change identifies spurious issues with packet-generator such as: CliFailedCommandError: packet-generator capture: pcap file '/tmp/vpp-unittest-Test6RD-v09RPA/pg0_out.pcap' does not exist. These issues resolve themselves on remaining test passes. Change-Id: Iecbd09daee954d892306d11baff3864a43c5b603 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-05-16tests: refactor. Replace literal constant w/ named constant.Paul Vinciguerra1-17/+19
* change literal packet count vlaues from 65 to a named constant of 67. (This value was recommended to exercise single, dual, and quad loops) Change-Id: Ieb1738dddacb8b6ea7fa25883032ac01a98399e1 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-04-05IPSEC: punt reasons; SPI=0, no-tunnelNeale Ranns1-6/+6
Change-Id: If76992e283a27fa193a6865257ab3aa764066e48 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-28Punt InfraNeale Ranns1-0/+176
A punt/exception path that provides: 1) clients that use the infra 2) clients can create punt reasons 3) clients can register to recieve packets that are punted for a given reason to be sent to the desired node. 4) nodes which punt packets fill in the {reason,protocol} of the buffere (in the meta-data) and send to the new node "punt-dispatch" 5) punt-dispatch sends packets to the registered nodes or drops Change-Id: Ia4f144337f1387cbe585b4f375d0842aefffcde5 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-28Typos. A bunch of typos I've been collecting.Paul Vinciguerra1-4/+4
Change-Id: I53ab8d17914e6563110354e4052109ac02bf8f3b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-11VPP-1508: Tests: Fix vpp_api struct.error under py3.Paul Vinciguerra1-25/+48
Fix struct.error: expected bytes object got <class 'str'> Change-Id: I837ae6e97e44c789a9372677151b157956525334 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-11VPP-1508: Use scapy.compat to manage packet level library differences.Paul Vinciguerra1-2/+3
Change-Id: Icdf6abc9e53d33b26fd1d531c7dda6be0bb9cb55 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-02-04VTL Cleanup: Fix missing calls to setUpClass/tearDownClass, fix numerous ↵Paul Vinciguerra1-0/+25
TypeErrors. * TypeError: assertIsNotNone() got an unexpected keyword argument 'msg' * Correct missing calls to setUpClass/tearDownClass. If you want the setUpClass and tearDownClass on base classes called then you must call up to them yourself. The implementations in TestCase are empty. https://docs.python.org/2/library/unittest.html#setupclass-and-teardownclass Cleans up issues in parallel test mode: ------------- FAILURES AND ERRORS IN TESTS: Testcase name: VCL Thru Host Stack Bidir Nsock FAILURE: test_vcl.VCLThruHostStackBidirNsock.test_vcl_thru_host_stack_bi_dir_nsock [test_vcl.VCLThruHostStackBidirNsock.test_vcl_thru_host_stack_bi_dir_nsock] Testcase name: Bidirectional Forwarding Detection (BFD) (changing auth) ERROR: test_bfd.BFDAuthOnOffTestCase.test_auth_change_key_delayed [test_bfd.BFDAuthOnOffTestCase.test_auth_change_key_delayed] ERROR: test_bfd.BFDAuthOnOffTestCase.test_auth_change_key_immediate [test_bfd.BFDAuthOnOffTestCase.test_auth_change_key_immediate] ERROR: test_bfd.BFDAuthOnOffTestCase.test_auth_off_delayed [test_bfd.BFDAuthOnOffTestCase.test_auth_off_delayed] ERROR: test_bfd.BFDAuthOnOffTestCase.test_auth_off_immediate [test_bfd.BFDAuthOnOffTestCase.test_auth_off_immediate] ERROR: test_bfd.BFDAuthOnOffTestCase.test_auth_on_delayed [test_bfd.BFDAuthOnOffTestCase.test_auth_on_delayed] ERROR: test_bfd.BFDAuthOnOffTestCase.test_auth_on_immediate [test_bfd.BFDAuthOnOffTestCase.test_auth_on_immediate] Testcase name: Punt Socket for IPv4 ERROR: test_punt.TestIP4PuntSocket.test_punt_socket_dump [test_punt.TestIP4PuntSocket.test_punt_socket_dump] ERROR: test_punt.TestIP4PuntSocket.test_punt_socket_traffic_multi_port_multi_sockets [test_punt.TestIP4PuntSocket.test_punt_socket_traffic_multi_port_multi_sockets] ERROR: test_punt.TestIP4PuntSocket.test_punt_socket_traffic_multi_ports_single_socket [test_punt.TestIP4PuntSocket.test_punt_socket_traffic_multi_ports_single_socket] ERROR: test_punt.TestIP4PuntSocket.test_punt_socket_traffic_single_port_single_socket [test_punt.TestIP4PuntSocket.test_punt_socket_traffic_single_port_single_socket] Testcase name: Bidirectional Forwarding Detection (BFD) (IPv6) ERROR: test_bfd.BFD6TestCase.test_echo [test_bfd.BFD6TestCase.test_echo] ERROR: test_bfd.BFD6TestCase.test_echo_looped_back [test_bfd.BFD6TestCase.test_echo_looped_back] ERROR: test_bfd.BFD6TestCase.test_intf_deleted [test_bfd.BFD6TestCase.test_intf_deleted] ERROR: test_bfd.BFD6TestCase.test_session_up [test_bfd.BFD6TestCase.test_session_up] ERROR: test_bfd.BFD6TestCase.test_session_up_by_ip [test_bfd.BFD6TestCase.test_session_up_by_ip] Testcase name: Bidirectional Forwarding Detection (BFD) (CLI) ERROR: test_bfd.BFDCLITestCase.test_add_mod_del_bfd_udp [test_bfd.BFDCLITestCase.test_add_mod_del_bfd_udp] ERROR: test_bfd.BFDCLITestCase.test_add_mod_del_bfd_udp6 [test_bfd.BFDCLITestCase.test_add_mod_del_bfd_udp6] ERROR: test_bfd.BFDCLITestCase.test_add_mod_del_bfd_udp6_auth [test_bfd.BFDCLITestCase.test_add_mod_del_bfd_udp6_auth] ERROR: test_bfd.BFDCLITestCase.test_add_mod_del_bfd_udp_auth [test_bfd.BFDCLITestCase.test_add_mod_del_bfd_udp_auth] ERROR: test_bfd.BFDCLITestCase.test_admin_up_down [test_bfd.BFDCLITestCase.test_admin_up_down] ERROR: test_bfd.BFDCLITestCase.test_auth_on_off [test_bfd.BFDCLITestCase.test_auth_on_off] ERROR: test_bfd.BFDCLITestCase.test_auth_on_off_delayed [test_bfd.BFDCLITestCase.test_auth_on_off_delayed] ERROR: test_bfd.BFDCLITestCase.test_set_del_meticulous_sha1_key [test_bfd.BFDCLITestCase.test_set_del_meticulous_sha1_key] ERROR: test_bfd.BFDCLITestCase.test_set_del_sha1_key [test_bfd.BFDCLITestCase.test_set_del_sha1_key] ERROR: test_bfd.BFDCLITestCase.test_set_del_udp_echo_source [test_bfd.BFDCLITestCase.test_set_del_udp_echo_source] ERROR: test_bfd.BFDCLITestCase.test_show [test_bfd.BFDCLITestCase.test_show] Testcase name: VAPI test ERROR: test_vapi.VAPITestCase.test_vapi_c [test_vapi.VAPITestCase.test_vapi_c] Testcase name: Container integration extended testcases ERROR: test_container.ContainerIntegrationTestCase.test_0010_basic_conn_test [test_container.ContainerIntegrationTestCase.test_0010_basic_conn_test] ERROR: test_container.ContainerIntegrationTestCase.test_0011_basic_conn_test [test_container.ContainerIntegrationTestCase.test_0011_basic_conn_test] ERROR: test_container.ContainerIntegrationTestCase.test_0050_loopback_prepare_test [test_container.ContainerIntegrationTestCase.test_0050_loopback_prepare_test] ERROR: test_container.ContainerIntegrationTestCase.test_0110_basic_conn_test [test_container.ContainerIntegrationTestCase.test_0110_basic_conn_test] ERROR: test_container.ContainerIntegrationTestCase.test_0111_basic_conn_test [test_container.ContainerIntegrationTestCase.test_0111_basic_conn_test] ERROR: test_container.ContainerIntegrationTestCase.test_0200_basic_conn_test [test_container.ContainerIntegrationTestCase.test_0200_basic_conn_test] ERROR: test_container.ContainerIntegrationTestCase.test_0210_basic_conn_test [test_container.ContainerIntegrationTestCase.test_0210_basic_conn_test] ERROR: test_container.ContainerIntegrationTestCase.test_0211_basic_conn_test [test_container.ContainerIntegrationTestCase.test_0211_basic_conn_test] ERROR: test_container.ContainerIntegrationTestCase.test_0300_unconfigure_commands [test_container.ContainerIntegrationTestCase.test_0300_unconfigure_commands] ERROR: test_container.ContainerIntegrationTestCase.test_0410_spoof_test [test_container.ContainerIntegrationTestCase.test_0410_spoof_test] ERROR: test_container.ContainerIntegrationTestCase.test_0411_spoof_test [test_container.ContainerIntegrationTestCase.test_0411_spoof_test] Testcase name: Re-enable IPFIX ERROR: test_flowprobe.ReenableIPFIX.test_0011 [test_flowprobe.ReenableIPFIX.test_0011] Testcase name: VXLAN over IPv6 Test Case ERROR: setUpClass [setUpClass (test_vxlan6.TestVxlan6)] Testcase name: JVPP Core Test Case ERROR: test_jvpp.TestJVpp.test_vpp_acl_callback_api [test_jvpp.TestJVpp.test_vpp_acl_callback_api] ERROR: test_jvpp.TestJVpp.test_vpp_acl_future_api [test_jvpp.TestJVpp.test_vpp_acl_future_api] ERROR: test_jvpp.TestJVpp.test_vpp_core_callback_api [test_jvpp.TestJVpp.test_vpp_core_callback_api] ERROR: test_jvpp.TestJVpp.test_vpp_core_future_api [test_jvpp.TestJVpp.test_vpp_core_future_api] ERROR: test_jvpp.TestJVpp.test_vpp_ioamexport_callback_api [test_jvpp.TestJVpp.test_vpp_ioamexport_callback_api] ERROR: test_jvpp.TestJVpp.test_vpp_ioamexport_future_api [test_jvpp.TestJVpp.test_vpp_ioamexport_future_api] ERROR: test_jvpp.TestJVpp.test_vpp_ioampot_callback_api [test_jvpp.TestJVpp.test_vpp_ioampot_callback_api] ERROR: test_jvpp.TestJVpp.test_vpp_ioampot_future_api [test_jvpp.TestJVpp.test_vpp_ioampot_future_api] ERROR: test_jvpp.TestJVpp.test_vpp_ioamtrace_callback_api [test_jvpp.TestJVpp.test_vpp_ioamtrace_callback_api] ERROR: test_jvpp.TestJVpp.test_vpp_ioamtrace_future_api [test_jvpp.TestJVpp.test_vpp_ioamtrace_future_api] ERROR: test_jvpp.TestJVpp.test_vpp_snat_callback_api [test_jvpp.TestJVpp.test_vpp_snat_callback_api] ERROR: test_jvpp.TestJVpp.test_vpp_snat_future_api [test_jvpp.TestJVpp.test_vpp_snat_future_api] Testcase name: LDP Cut Thru Tests FAILURE: test_vcl.LDPCutThruTestCase.test_ldp_cut_thru_iperf3 [test_vcl.LDPCutThruTestCase.test_ldp_cut_thru_iperf3] Testcase name: ACL plugin connection-oriented extended testcases ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_0000_conn_prepare_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_0000_conn_prepare_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_0001_basic_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_0001_basic_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_0002_basic_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_0002_basic_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_0005_clear_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_0005_clear_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_0006_clear_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_0006_clear_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_0011_active_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_0011_active_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_0012_active_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_0012_active_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_1001_basic_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_1001_basic_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_1002_basic_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_1002_basic_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_1005_clear_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_1005_clear_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_1006_clear_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_1006_clear_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_1011_active_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_1011_active_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_1012_active_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_1012_active_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_2000_prepare_for_tcp_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_2000_prepare_for_tcp_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_2001_tcp_transient_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_2001_tcp_transient_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_2002_tcp_transient_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_2002_tcp_transient_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_2003_tcp_transient_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_2003_tcp_transient_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_2004_tcp_transient_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_2004_tcp_transient_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_2005_tcp_transient_teardown_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_2005_tcp_transient_teardown_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_2006_tcp_transient_teardown_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_2006_tcp_transient_teardown_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_3001_tcp_transient_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_3001_tcp_transient_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_3002_tcp_transient_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_3002_tcp_transient_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_3003_tcp_transient_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_3003_tcp_transient_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_3004_tcp_transient_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_3004_tcp_transient_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_3005_tcp_transient_teardown_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_3005_tcp_transient_teardown_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_3006_tcp_transient_teardown_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_3006_tcp_transient_teardown_conn_test] Testcase name: LDP Thru Host Stack Echo FAILURE: test_vcl.LDPThruHostStackEcho.test_ldp_thru_host_stack_echo [test_vcl.LDPThruHostStackEcho.test_ldp_thru_host_stack_echo] Testcase name: Bidirectional Forwarding Detection (BFD) - API ERROR: test_bfd.BFDAPITestCase.test_activate_auth [test_bfd.BFDAPITestCase.test_activate_auth] ERROR: test_bfd.BFDAPITestCase.test_add_auth_nonexistent_key [test_bfd.BFDAPITestCase.test_add_auth_nonexistent_key] ERROR: test_bfd.BFDAPITestCase.test_add_bfd [test_bfd.BFDAPITestCase.test_add_bfd] ERROR: test_bfd.BFDAPITestCase.test_add_bfd6 [test_bfd.BFDAPITestCase.test_add_bfd6] ERROR: test_bfd.BFDAPITestCase.test_add_bfd_sha1 [test_bfd.BFDAPITestCase.test_add_bfd_sha1] ERROR: test_bfd.BFDAPITestCase.test_add_sha1_keys [test_bfd.BFDAPITestCase.test_add_sha1_keys] ERROR: test_bfd.BFDAPITestCase.test_change_key [test_bfd.BFDAPITestCase.test_change_key] ERROR: test_bfd.BFDAPITestCase.test_deactivate_auth [test_bfd.BFDAPITestCase.test_deactivate_auth] ERROR: test_bfd.BFDAPITestCase.test_double_add [test_bfd.BFDAPITestCase.test_double_add] ERROR: test_bfd.BFDAPITestCase.test_double_add_sha1 [test_bfd.BFDAPITestCase.test_double_add_sha1] ERROR: test_bfd.BFDAPITestCase.test_mod_bfd [test_bfd.BFDAPITestCase.test_mod_bfd] ERROR: test_bfd.BFDAPITestCase.test_set_del_udp_echo_source [test_bfd.BFDAPITestCase.test_set_del_udp_echo_source] ERROR: test_bfd.BFDAPITestCase.test_shared_sha1_key [test_bfd.BFDAPITestCase.test_shared_sha1_key] Testcase name: LDP Thru Host Stack Iperf FAILURE: test_vcl.LDPThruHostStackIperf.test_ldp_thru_host_stack_iperf3 [test_vcl.LDPThruHostStackIperf.test_ldp_thru_host_stack_iperf3] Testcase name: Bidirectional Forwarding Detection (BFD) (SHA1 auth) ERROR: test_bfd.BFDSHA1TestCase.test_session_up [test_bfd.BFDSHA1TestCase.test_session_up] Testcase name: Punt Socket for IPv6 ERROR: test_punt.TestIP6PuntSocket.test_punt_socket_dump [test_punt.TestIP6PuntSocket.test_punt_socket_dump] ERROR: test_punt.TestIP6PuntSocket.test_punt_socket_traffic_multi_port_multi_sockets [test_punt.TestIP6PuntSocket.test_punt_socket_traffic_multi_port_multi_sockets] ERROR: test_punt.TestIP6PuntSocket.test_punt_socket_traffic_multi_ports_single_socket [test_punt.TestIP6PuntSocket.test_punt_socket_traffic_multi_ports_single_socket] ERROR: test_punt.TestIP6PuntSocket.test_punt_socket_traffic_single_port_single_socket [test_punt.TestIP6PuntSocket.test_punt_socket_traffic_single_port_single_socket] Testcase name: Disable Flowprobe feature ERROR: test_flowprobe.DisableFP.test_0001 [test_flowprobe.DisableFP.test_0001] Testcase name: Disable IPFIX ERROR: test_flowprobe.DisableIPFIX.test_0001 [test_flowprobe.DisableIPFIX.test_0001] Testcase name: VPP Object Model Test ERROR: test_vom.VOMTestCase.test_vom_cpp [test_vom.VOMTestCase.test_vom_cpp] Testcase name: BFD-FIB interactions (IPv6) ERROR: test_bfd.BFDFIBTestCase.test_session_with_fib [test_bfd.BFDFIBTestCase.test_session_with_fib] Testcase name: Bidirectional Forwarding Detection (BFD) ERROR: test_bfd.BFD4TestCase.test_echo [test_bfd.BFD4TestCase.test_echo] ERROR: test_bfd.BFD4TestCase.test_echo_looped_back [test_bfd.BFD4TestCase.test_echo_looped_back] ERROR: test_bfd.BFD4TestCase.test_intf_deleted [test_bfd.BFD4TestCase.test_intf_deleted] ERROR: test_bfd.BFD4TestCase.test_session_down [test_bfd.BFD4TestCase.test_session_down] ERROR: test_bfd.BFD4TestCase.test_session_up [test_bfd.BFD4TestCase.test_session_up] ERROR: test_bfd.BFD4TestCase.test_session_up_by_ip [test_bfd.BFD4TestCase.test_session_up_by_ip] Testcase name: VXLAN-GPE Test Case ERROR: test_vxlan_gpe.TestVxlanGpe.test_decap [test_vxlan_gpe.TestVxlanGpe.test_decap] ERROR: test_vxlan_gpe.TestVxlanGpe.test_encap [test_vxlan_gpe.TestVxlanGpe.test_encap] ERROR: test_vxlan_gpe.TestVxlanGpe.test_ucast_flood [test_vxlan_gpe.TestVxlanGpe.test_ucast_flood] Testcase name: Re-enable Flowprobe feature ERROR: test_flowprobe.ReenableFP.test_0001 [test_flowprobe.ReenableFP.test_0001] Testcase name: LDP IPv6 Cut Thru Tests FAILURE: test_vcl.LDPIpv6CutThruTestCase.test_ldp_ipv6_cut_thru_echo [test_vcl.LDPIpv6CutThruTestCase.test_ldp_ipv6_cut_thru_echo] TESTCASES WHERE NO TESTS WERE SUCCESSFULLY EXECUTED: VXLAN over IPv6 Test Case ============================================================================== 0 attempt(s) left. Change-Id: Id202ed6ee7f57670f34ec87380244c568b509416 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-12-21Revert "tests: Rework vpp config generation."Ole Troan1-2/+2
This reverts commit 919efad2671993d4c6d5a0dba8eeb99d5c60edf1. Change-Id: I5ec4fa08a03f508dac684dc1ddbd7e6b85c49b97 Signed-off-by: Ole Troan <ot@cisco.com>
2018-12-21tests: Rework vpp config generation.Paul Vinciguerra1-2/+2
* Allows test cases to configure the VPP runtime config during fixture setup. * Sample use in a TestCase: @classmethod def setUpConstants(cls): tempdir = cls.tempdir cls.config.add('punt', 'socket', '%s/socket_punt' % cls.tempdir) super(TestPuntSocket, cls).setUpConstants() # enable/disabe a plugin via: #cls.config.add_plugin('dpdk_plugin.so', 'disable') * Supports the following config stanzas: 'unix', 'acl-plugin' 'api-queue' 'api-trace' 'api-segment' 'cj' 'cpu' 'dns' 'dpdk # currently don't support dynamic keys # 'heapsize' 'l2learn' 'l2tp' 'mactime' 'mc' 'nat' 'oam' 'plugins' 'punt' 'session' 'socksvr' 'statseg' 'tapcli' 'tcp' 'tuntap' 'vhost-user' Change-Id: I44f276487267d26eaa46f87e730bdd861003b234 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-12-18punt: additional tests for multi clientsPavel Kotucek1-91/+408
Change-Id: I0e25c23fc7b44b465f1b0d05a881fbe9816a0264 Signed-off-by: Pavel Kotucek <pavel.kotucek@pantheon.tech>
2018-12-07VPP-1506: dump local punts and registered punt socketsPavel Kotucek1-0/+309
Change-Id: If7835e9b80ec9402404bfc8d271eb11a10ef992b Signed-off-by: Pavel Kotucek <pavel.kotucek@pantheon.tech>