Age | Commit message (Collapse) | Author | Files | Lines |
|
Split this work up into pieces.
Please don't add new wrappers to vpp_papi_provider.py.
Change-Id: I0f8f2afc4cd2bba07ea70ddecea2d7319f7b2e10
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Part of further cleanups of this file.
Removed most wrappers that don't have conflicting signature with
message API.
Change-Id: I6acd93d20291feb7731eb35ab2eb8c9f22f4632c
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
In preparation to remove the wrappers in vpp_papi_provider.py, ensure
names used in tests match the actual API message names.
Change-Id: I230ca4eb75aa727ff68d702e085a2edbbc6b6d19
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Update the syntax to support abstract classes in python 2 and python 3.
Depends on: new style classes -- https://gerrit.fd.io/r/16166
Change-Id: Iad2c1240149f38b3faca1b37ab95d3d210e1daee
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
use address_t and mac_address_t for IPv6 and ARP entries
and all other API calls in ip.api aprat from the route ones,
that will follow in a separate commit
Change-Id: I67161737c2184d3f8fc1e79ebd2b55121c5b0191
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change the definition of vl_api_mac_address_t to an aliased type.
Change-Id: I1434f316d0fad6a099592f39bceeb8faeaf1d134
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Add 2/3 support to binarytomac and mactobinary and move to vpp_mac.py
Change-Id: I3dc7e4a24486aee22140c781aae7e44e58935877
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change to binascii.hexlify() for consistent bahavior.
Change-Id: Ie430cdd1ffeb6510db4aa037546e42d85992093b
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
This fixes the change from https://gerrit.fd.io/r/#/c/16175/
...
======
Totals
======
Ran: 856 tests in 2123.0000 sec.
- Passed: 667
- Skipped: 157
- Expected Fail: 0
- Unexpected Success: 0
- Failed: 32
Sum of execute time for each test: 1641.0832 sec.
==============
Worker Balance
==============
- Worker 0 (416 tests) => 0:35:06.788054
- Worker 1 (440 tests) => 0:31:13.814911
Test id Runtime (s)
-------------------------------------------------------------------------------------- -----------
test.test_vcl.VCLCutThruTestCase.test_ldp_cut_thru_bi_dir_nsock 120.382
test.test_vcl.VCLThruHostStackGroupBTestCase.test_ldp_thru_host_stack_bi_dir_nsock 60.368
test.test_vcl.VCLIpv6ThruHostStackGroupBTestCase.test_ldp_thru_host_stack_bi_dir_nsock 60.356
test.test_igmp.TestIgmp.test_igmp_host 47.411
test.test_reassembly.TestFIFReassembly.test_fif6 38.561
test.test_reassembly.TestFIFReassembly.test_fif4 37.045
test.test_gbp.TestGBP.test_gbp 30.041
test.test_dhcp.TestDHCP.test_dhcp_proxy 29.339
test.test_vcl.VCLCutThruTestCase.test_ldp_cut_thru_iperf3 20.489
test.test_neighbor.ARPTestCase.test_arp 19.004
Change-Id: Ic1565f14962f157d5041230de3aeeab0b85f21e1
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Use six.reprlib. Uses repr for python 2 and reprlib for python 3.
Change-Id: Ia343a492d533bd511ed57166381e10a37e452d36
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Learning GBP endpoints over vxlan-gbp tunnels
Change-Id: I1db9fda5a16802d9ad8b4efd4e475614f3b21502
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I2c330945bb0b07f649f574a055bfbea455e5d0b3
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: I89e90193ded1beb6cb0950c15737f9467efac1c3
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
also some moving of l2 headers to reduce dependencies
Change-Id: I7a700a411a91451ef13fd65f9c90de2432b793bb
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This reverts commit e0d2bd6bd7fc59c0c6ac48195d7f825dc99bfd91.
Change-Id: If491e16f9ea66b2493a6a7c7f3c684ed585f8f51
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
This reverts commit a98346f664aae148d26a8e158008b773d73db96f.
Change-Id: Iee5b3a5ddff0e8fd3a30fe5973cee24de434fe12
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Calculate IP/TCP/UDP checksums in software before adding authentication.
Change-Id: I3e121cb00aeba667764f39ade8d62170f18f8b6b
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I4b5b60e7c6f618bb935eab1e96a2e79bbb14f58f
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: Ic5dcadd13c88b8a5e7896dab82404509c081614a
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
When VPP has an interface whose address is also applied to a TAP
interface on the host, then VPP's TAP interface will be unnumbered
to the 'real' interface and do proxy ARP from the host.
the curious aspect of this setup is that ARP requests from the host
will come from the VPP's own address.
Change-Id: Ia238790e1034ba3cd3facdab29387b65a31525f2
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I4c3ce4d58df7977490fc94991291422ea1e31ee3
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Drop comes before lookup when enabled. is_first_or_last is not required when setting a feature, the anchor is added in find_config_with_features().
Don't make the PG interfaces automatically L3 enabled, this way we can have tests that check the L3 protocol disbaled behaviour.
Change-Id: Icef22a920b27ff9cec6ab2da6b05f05c532cb60f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
allow this config to function:
set int ip address loop0 169.254.1.1/32 (the default GW address for attached hosts)
set int unnumbered af_packet0 use loop0 ('enable' IP on the host interface)
ip route add 192.168.1.1/32 via af_packet0 (where to find the host)
repeat for each host and host interface.
Inter-host communication is throught the /32 routes.
To allow this:
1 - attached host routes have the ATTACHED flag set, so the ARP code accepts then as legitimate sources
2 - unnumbered interfaces inherit the source address from the IP interface
Change-Id: Ib66c5f0e848c528f79372813adc3a0c11b50717f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ic6ac7e441a7b75baa02f03c1585d1ae00903a399
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
1) tests for RA options
2) memleaks deleteing a ip6_radv_info_t
3) MLD prefix code refactoring
Change-Id: I34db103994bd8fbdbbec50b202d72770dd145681
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Icf0d72f6af1f98c86f78e586c354515ac69804aa
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I40d6d763b55a26cdee0afef85d1acdd19dd10dd6
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- add/delete IPv6 VRF instances and verify results by parsing output
of ip6_fib_dump API command and by traffic
- small changes in assert_nothing_captured and get_capture to get logged
unexpected packets
Change-Id: I32207447be2df942e335aa9890ff52fb88e46597
Signed-off-by: Jan Gelety <jgelety@cisco.com>
|
|
- IPv[46] mfib tables with support for (*,G/m), (*,G) and (S,G) exact and longest prefix match
- Replication represented via a new replicate DPO.
- RPF configuration and data-plane checking
- data-plane signals sent to listening control planes.
The functions of multicast forwarding entries differ from their unicast conterparts, so we introduce a new mfib_table_t and mfib_entry_t objects. However, we re-use the fib_path_list to resolve and build the entry's output list. the fib_path_list provides the service to construct a replicate DPO for multicast.
'make tests' is added to with two new suites; TEST=mfib, this is invocation of the CLI command 'test mfib' which deals with many path add/remove, flag set/unset scenarios, TEST=ip-mcast, data-plane forwarding tests.
Updated applications to use the new MIFB functions;
- IPv6 NS/RA.
- DHCPv6
unit tests for these are undated accordingly.
Change-Id: I49ec37b01f1b170335a5697541c8fd30e6d3a961
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Iaa9538c7cca500c04cf2704e5bf87480543cfcdf
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: Ib4f0353aab6112fcc3c3d8f0bcbed5bc4b567b9b
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
- add/delete IPv4 VRF instances and verify results by parsing output
of ip_fib_dump API command and by traffic
Change-Id: I61ed5013adca29afd00b942f65be7bf964f38d85
Signed-off-by: Jan Gelety <jgelety@cisco.com>
|
|
includes Fix for VPP-584 with API change to remove prefix length from LL programming
Change-Id: If860751c35e60255fb977f73bc33e8c2649e728e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I0581da7a682bfe4dd6520ecf1b2ea6bd8c20b1b3
Signed-off-by: Matej Klotton <mklotton@cisco.com>
|
|
- small correction of docstrings
- fix of create_pg_interface
Change-Id: I1958bd5ddaddaa2f7e6cbb18b0076e59e86d1e68
Signed-off-by: Jan Gelety <jgelety@cisco.com>
|
|
Change-Id: Idb3119792943664748c4abc3829ad723f4156dfe
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I1eb0f735c5d025e6096d5760eb01419a1c58530a
Signed-off-by: Matej Klotton <mklotton@cisco.com>
|
|
Change-Id: I234240e9bdd4b69ad64a17b1449ae1e81c0edaca
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- update IRB, IPv4, ipv6 doc
- revert 778c2765c8ea5c6628f6d668847f0b9ae06dbf3d
Change-Id: I9af5ed9329ce5fe01392cf28d5bf321cfc647e48
Signed-off-by: Matej Klotton <mklotton@cisco.com>
|
|
- JIRA: CSIT-255
- create loopback interfaces
- move pg-interface specific arp and neighbor discovery from vpp_interface to vpp_pg_interface
- base configuration of IRB tests
- IP test scenario
Change-Id: I9945a188163652a4e22325877aef008c4d029557
Signed-off-by: Matej Klotton <mklotton@cisco.com>
|
|
Add some 'make test' unit tests for MPLS explicit NULL label handling.
Fix the stacking of the MPLS load-balance result form the lookup onto the IPx lookup object.
Change-Id: I890d1221b8e3dea99bcc714ed9d0154a5f602c52
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I31da3b1857b6399f9899276a2d99cdd19436296c
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Signed-off-by: Matej Klotton <mklotton@cisco.com>
Signed-off-by: Jan Gelety <jgelety@cisco.com>
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|