summaryrefslogtreecommitdiffstats
path: root/test/vpp_ip.py
AgeCommit message (Collapse)AuthorFilesLines
2021-02-15ip: Path MTUNeale Ranns1-0/+46
Type: feature Support setting the MTU for a peer on an interface. The minimum value of the path and interface MTU is used at forwarding time. the path MTU is specified for a given peer, by address and table-ID. In the forwarding plane the MTU is enfored either: 1 - if the peer is attached, then the MTU is set on the peer's adjacency 2 - if the peer is not attached, it is remote, then a DPO is added to the peer's FIB entry to perform the necessary fragmentation. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I8b9ea6a07868b50e97e2561f18d9335407dea7ae
2020-12-01tests: remove ip_punt from vpp_papi_provider and add ip_punt object modelsJakub Grajciar1-0/+48
Type: refactor Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: I1bf53c2554e6b313467f618717698ed158db9065 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2020-04-28tests: implement ipaddress convenience methodsPaul Vinciguerra1-26/+11
Add vpp specific properties to ip addresses for use in the api. .vapi_af -- returns [ADDRESS_IP4, ADDRESS_IP6] .vapi_af_name -- returns the string ['ip4', 'ip6'] Update tests to demonstrate usage. Type: feature Change-Id: I43447a1522769d99f89debdc714c51700068d771 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-11-26fib: Table ReplaceNeale Ranns1-8/+9
Type: feature from the API doc, a table replace is: " The use-case is that, for some unspecified reason, the control plane has a very different set of entries it wants in the table than VPP currently has. The CP would thus like to 'replace' VPP's current table only by specifying what the new set of entries shall be, i.e. it is not going to delete anything that already eixts. the CP delcartes the start of this procedure with this begin_replace API Call, and when it has populated all the entries it wants, it calls the below end_replace API. From this point on it is of coursce free to add and delete entries as usual. The underlying mechanism by which VPP implements this replace is purposefully left unspecified. " In the FIB, the algorithm is implemented using mark and sweep. Algorithm goes: 1) replace_begin: this marks all the entries in that table as 'stale' 2) download all the entries that should be in this table - this clears the stale flag on those entries 3) signal the table converged: ip_table_replace_end - this removes all entries that are still stale this procedure can be used when an agent first connects to VPP, as an alternative to dump and diff state reconciliation. Change-Id: I168edec10cf7670866076b129ebfe6149ea8222e Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-11-15tests: Remove the unrequired VPP IP address/prefix class wrappersNeale Ranns1-144/+19
Type: refactor Change-Id: I204f3f8eebc5f5d5a377e91262f91c615fd00168 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-26api: refactor format_vl_api_prefix_t return keysPaul Vinciguerra1-3/+3
format_vl_api_prefix_t returns a dict with keys 'address' and 'address_length', but other format_vl_api_prefix functions return a dict with 'prefix', and 'len'. Refactor all format_vl_api_prefix_t to return consistent keys 'address' and 'len'. Type: refactor Change-Id: I5f9558fc2da8742a303266e011102f5b2db80aad Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-18fib: fib api updatesNeale Ranns1-12/+67
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-02-01VTL: Fix issue with ipaddress library use under python2.Paul Vinciguerra1-3/+7
If you pass in a non-unicode 4-byte ipv6 address to ip_address, ipaddress interprets this as an IPv4Address. Under python2, ip_address interprets 'a7::' as a packed ipv4: 97.55.58.58 You can test with: --- import ipaddress try: text_type = unicode except NameError: text_type = str addr = ipaddress.ip_address('a7::') print(addr) --- Change-Id: I06c561e0ab7315869cc89d0bb08c05e743a90982 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-12-20test/vpp_ip.py: Correct usage of 'is'Paul Vinciguerra1-32/+28
* Correct 'is' (identity) usage where equality is needed '=='. * Change raise 'Exception' to log message and return NotImplemented. (see: https://docs.python.org/3/library/constants.html#NotImplemented) * Remove duplicate property: bytes. * Remove duplicate method: __eq__. Change-Id: Id3ae4f92f985eb7cef334e2679f19ecc971007c1 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-12-12PAPI: Allow ipaddress object as argument and return values from API callsOle Troan1-14/+0
The API calls that use any of vl_api_address_t, vl_api_ip4_address, vl_api_ip6_address_t, vl_api_prefix_t, vl_api_ip4_prefix_t, vl_api_ip6_prefix_t now accepts either the old style dictionary, a text string (2001:db8::/32) or an ipaddress ojbect. Unless it is called with '_no_type_conversion':True, it will also return an appropriate ipaddress object. Change-Id: I84e4a1577bd57f6b5ae725f316a523988b6a955b Signed-off-by: Ole Troan <ot@cisco.com>
2018-12-06API: Change ip4_address and ip6_address to use type alias.Ole Troan1-33/+9
Change-Id: Id8669bbadd1d6b2054865a310a654e9b38d1667d Signed-off-by: Ole Troan <ot@cisco.com>
2018-11-22MAP: Use explicit address/prefix types in APIOle Troan1-0/+14
Change-Id: Ic751fecc4a060eedcdb9eaf5d02e1416c838fd63 Signed-off-by: Ole Troan <ot@cisco.com>
2018-11-07GBP Endpoint LearningNeale Ranns1-0/+12
Learning GBP endpoints over vxlan-gbp tunnels Change-Id: I1db9fda5a16802d9ad8b4efd4e475614f3b21502 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-10-18PAPI: Expose API enums to tests / applicationsOle Troan1-11/+9
e.g: from vpp_papi import VppEnum VppEnum.vl_api_address_family_t.ADDRESS_IP4 Change-Id: I10c22d57234a1a06e98a889cf80b19085b468ed3 Signed-off-by: Ole Troan <ot@cisco.com>
2018-09-11GBP Endpoint UpdatesNeale Ranns1-18/+116
- common types on the API - endpoints keyed in various ways for DP lookup - conparison functions for VPP IP address types Change-Id: If7ec0bbc5cea71fd0983fe78987d147ec1bd7ec8 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-08-10Use IP address types on UDP encap APINeale Ranns1-0/+135
Change-Id: I3c714c519b6d0009329b50947ce250c18ee2a85a Signed-off-by: Neale Ranns <nranns@cisco.com>