aboutsummaryrefslogtreecommitdiffstats
path: root/test/vpp_papi_provider.py
AgeCommit message (Collapse)AuthorFilesLines
2018-09-14BIER API and load-balancing fixesNeale Ranns1-2/+4
Change-Id: Ibda19d786070c942c75016ab568c8361de2f24af Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-13NAT: TCP MSS clampingMatus Fabian1-0/+14
NAT plugin changes the MSS value in TCP SYN packets to avoid fragmentation. If the negotiated MSS value is greater than the configured value it is changed to the configured value. If the negotiated MSS value is smaller than the configured value it remains unchanged. Change-Id: Ic3c4f94a2f1b76e2bf79f50f3ad36a4097f3f188 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-09-12VXLAN-GBP: use common types on the APINeale Ranns1-14/+18
Change-Id: I11ec0d7048d36c30a97d437e5b0abd05f06ab0eb Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-11GBP Endpoint UpdatesNeale Ranns1-12/+16
- common types on the API - endpoints keyed in various ways for DP lookup - conparison functions for VPP IP address types Change-Id: If7ec0bbc5cea71fd0983fe78987d147ec1bd7ec8 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-09-10vxlan-gbp: Add support for vxlan gbpMohsin Kazmi1-1/+36
This patch implements vxlan with extension of group based policy support. Change-Id: I70405bf7332c02867286da8958d9652837edd3c2 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-09-04NAT: add support for configurable port range (VPP-1346)Matus Fabian1-0/+30
Change-Id: I6882b6daa05db866fe6e78a62b380ec331507f74 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-09-03NAT44: client-IP based session affinity for load-balancing (VPP-1297)Matus Fabian1-0/+3
Enable client-IP based session affinity per LB NAT rule with specific timeout. Change-Id: I9aade152e330218d21dfda99cc5e984d769ab806 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-08-30SR-MPLS: fixes and testsNeale Ranns1-0/+13
- the FIB path takes a vector of type fib_mpls_label_t not u32 so the untype safe vec_add did not work - write som eSR-MPLS tests - allow an MPLS tunnel to resolve through a SR BSID Change-Id: I2a18b9a9bf43584100ac269c4ebc286c9e3b3ea5 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-08-27NAT44: add support for session timeout (VPP-1272)Matus Fabian1-7/+7
NAT44 (vanilla/simple and endpoint-dependent mode) now lazily delete expired sessions. When inserting to session lookup hash and bucket is full, expired session is overwritten. Change-Id: Ib1b34959f60f0ca4f5b13525b1d41dd2f992288d Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-08-22IPIP and SIXRD tunnels create API needs table-IDs not fib-indexesNeale Ranns1-5/+6
Change-Id: Ifaef196a24fa9b6924f2b9692318f69763cee5e1 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-08-10Use IP address types on UDP encap APINeale Ranns1-21/+21
Change-Id: I3c714c519b6d0009329b50947ce250c18ee2a85a Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-08-10Add test of the IP unnumbered dumpNeale Ranns1-0/+4
Change-Id: Ic3e978faf58b43adb8a9fd0dea36eb4513fe0c64 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-08-09Fix "Old Style VLA" build warningsJuraj Sloboda1-0/+6
Change-Id: I8d42f6ed58ec34298d41edcb3d783e7e9ded3eec Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-08-02NAT44: LB NAT - local backends in multiple VRFs (VPP-1345)Matus Fabian1-2/+0
Add support for local backends in multiple VRFs for load-balancing NAT rules. Change-Id: I64e6818bd67a7e69985003498cf1f16f7200c334 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-07-20IP directed broadcastNeale Ranns1-0/+12
with ip direct broadcast enable a packet to the interface's subnet broadcast address with be sent L2 broadcast on the interface. dissabled, it will be dropped. it is disabled by default, which preserves current behaviour Change-Id: If154cb92e64834e97a541b32624354348a0eafb3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-09IGMP improvementsNeale Ranns1-11/+24
- Enable/Disable an interface for IGMP - improve logging - refactor common code - no orphaned timers - IGMP state changes in main thread only - Large groups split over multiple state-change reports - SSM range configuration API. - more tests Change-Id: If5674f1044e7e97274a711f47807c9ba689d7b9a Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-07PipesNeale Ranns1-0/+12
A pipe resembles a unix pipe. Each end of the pipe is a full VPP interface. pipes can be used for e.g. packet recirculation, inter-BD, etc. Change-Id: I185bb9fb43dd233ff45da63ac1b85ae2e1ceca16 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-06-24Revert "Revert "ipsec: VPP-1316 calculate IP/TCP/UDP inner checksums""Klement Sekera1-71/+61
This reverts commit e0d2bd6bd7fc59c0c6ac48195d7f825dc99bfd91. Change-Id: If491e16f9ea66b2493a6a7c7f3c684ed585f8f51 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-06-22Revert "ipsec: VPP-1316 calculate IP/TCP/UDP inner checksums"Ole Troan1-61/+71
This reverts commit a98346f664aae148d26a8e158008b773d73db96f. Change-Id: Iee5b3a5ddff0e8fd3a30fe5973cee24de434fe12 Signed-off-by: Ole Troan <ot@cisco.com>
2018-06-22Python API: Add enum and union support.Ole Troan1-1/+1
As well as a rewrite of the encoders/decoders to make it more readable and extensible. (Re-commit after fix to verify build.) Change-Id: Ic244d3cebe070bb2570491f8a24f4a1e203f889a Signed-off-by: Ole Troan <ot@cisco.com>
2018-06-21ipsec: VPP-1316 calculate IP/TCP/UDP inner checksumsKlement Sekera1-71/+61
Calculate IP/TCP/UDP checksums in software before adding authentication. Change-Id: I3e121cb00aeba667764f39ade8d62170f18f8b6b Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-06-21Implement DHCPv6 IA NA client (VPP-1094)Juraj Sloboda1-0/+29
Change-Id: I682a47d6cf9975aca6136188d28ee93eaadf4fe3 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-06-19Fixed bugs in SRv6 APIPablo Camarillo1-6/+9
Jira ticket VPP-1196 Jira ticket VPP-1081 Jira ticket VPP-1078 Jira ticket VPP-1217 Change-Id: Id7e85229cae1017acb0aa4ca63ced334e6dafb8d Signed-off-by: pcamaril <pcamaril@cisco.com> Signed-off-by: Pablo Camarillo <pcamaril@cisco.com> Signed-off-by: pcamaril <pcamaril@cisco.com> Signed-off-by: Michal Cmarada <michal.cmarada@pantheon.tech>
2018-06-18Revert "Python API: Add enum and union support."Ole Trøan1-1/+1
This reverts commit a5ee900fb75201bbfceaf13c8bc57a13ed094988. Some of the unit tests breaks. Backing out until fixed. Change-Id: I1846fb417db44a2a772f7b59cda8bcfe6d39f8c3 Signed-off-by: Ole Troan <ot@cisco.com>
2018-06-17Python API: Add enum and union support.Ole Troan1-1/+1
As well as a rewrite of the encoders/decoders to make it more readable and extensible. Change-Id: I253369ac76303922bf9c11377622c8974fa92f19 Signed-off-by: Ole Troan <ot@cisco.com>
2018-06-11MTU: Software interface / Per-protocol MTU supportOle Troan1-1/+1
This patch separates setting of hardware interfaec and software interface MTU. Software MTU is L2 payload MTU (i.e. not including L2 header). Per-protocol MTU for IPv4, IPv6 and MPLS can also be set. Currently only IP4, IP6 are enabled in adjacency / rewrite code. Documentation in src/vnet/MTU.md Change-Id: Iee2fd6f0bbc8210748dd8e073ab9fab87d323690 Signed-off-by: Ole Troan <ot@cisco.com>
2018-06-08Implement DHCPv6 PD client (VPP-718, VPP-1050)Juraj Sloboda1-0/+44
Change-Id: I72a1ccdfdd5573335ef78fc01d5268934c73bd31 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-06-07DHCP Client DumpNeale Ranns1-6/+10
- use types on the DHCP API so that the same data is sent in comfing messages and in dumps - add the DHCP client dump API - update VOM to refelct API changes - rename VOM class dhcp_config* dhcp_client* - the VOM dhcp_client class maintains the lease data (which it reads on a dump) for clients to read Change-Id: I2a43463937cbd80c01d45798e74b21288d8b8ead Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-05-25ARP proxy dumpsNeale Ranns1-6/+7
Change-Id: I8335ebf266becf2f42bb3f28a17dfed8d9b08f97 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-05-25VPP-1277: IPIP - Copy TOS/TC from inner packet to outer.Ole Troan1-2/+3
Add support for either copying TOS/TC from inner packet to outer, or set to fixed value. Change-Id: I716a95f875349acec94317b266c8cf9f2f81a785 Signed-off-by: Ole Troan <ot@cisco.com>
2018-05-17NAT44: nat44_del_session and nat44_user_session_details API update (VPP-1271)Matus Fabian1-9/+25
Change-Id: I484d79000c1bbd87ff83847cf567bf3414a719d3 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-05-09ipsec: support UDP encap/decap for NAT traversalKlement Sekera1-5/+6
Change-Id: I65c12617ad49e4d5ef242e53988782f0cefa5684 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-04-19Add special Twice-NAT feature (VPP-1221)Juraj Sloboda1-0/+7
When enabled then Twice-NAT is applied only when source IP equals destination IP after DNAT Change-Id: I58a9d1d222b2a10c83eafffb2107f32c1b4aa3a8 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-04-17IP mcast: allow unicast address as a next-hopNeale Ranns1-1/+3
Change-Id: I5e679f2601e37688f2768620479dc2efb7d19ca3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-17ACL based forwardingAndrew Yourtchenko1-0/+20
A poor man's flow switching or policy based rounting. An ACL is used to match packets and is associated with a [set of] forwarding paths that determine how to forward matched packets - collectively this association is a 'policy'. Policies are then 'attached', in a priority order, to an interface when thaey are encountered as an input feature. If a packet matches no policies it is forwarded normally in the IP FIB. This commit is used to test the "ACL-as-a-service" functionality, which currently compiles, and the existing traffic ACL tests pass in both hash and linear modes. Change-Id: I0b274ec9f2e645352fa898b43eb54c457e195964 Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> Signed-off-by: Ole Troan <ot@cisco.com>
2018-04-15vhost: add vhost interface add/delete/dump API test cases to make testSteven1-0/+46
The vhost binary APIs for add/delete/dump interface were available long ago. But no unit tests were ever added in make test. This patch is to retrofit the missing unit tests. Change-Id: I489521b5ae359a1168ac5880a1f13a5f7e93ce4a Signed-off-by: Steven <sluong@cisco.com>
2018-04-13GBP V2Neale Ranns1-0/+63
update the GBP plugin to implement the full NAT feature set of opflex agent Change-Id: Ic06a039c889445ed0b9087fa1f292634192b0f8d Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-04-10test: Fix issues with new version of pycodestyle (VPP-1232)Chris Luke1-1/+2
- Ignore warnings W504 (newline after binary operator) which otherwise occurs a significant number of times. - Fix two instances of lines >79 chars. Change-Id: I8cef56f8afc237187995e638e610c8c0554e2bb5 Signed-off-by: Chris Luke <chrisy@flirble.org>
2018-03-23acl-plugin: make test: shuffle applied ACLs as part of the testsAndrew Yourtchenko1-0/+6
During the testing of 94f9a6de3f706243d138e05b63fef1d5c8174f6c I realized there was no test coverage for the cases where the ACLs are added then modified while having beein applied. This change adds some simple shuffling to l2l3 ACL test set, whereby after each of the ACLs being applied, a few extra ACLs are applied at the front and the back of the list, and are changed several times, the base for the changes being the set of all the ACEs that are being applied previously. After these few shuffles, the routine restores the applied ACLs and proceeds to the test as usual. Change-Id: Ieda2aa5b7963746d62484e54719309de9c1ee752 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-03-21bond: Add bonding driver and LACP protocolSteven1-0/+75
Add bonding driver to support creation of bond interface which composes of multiple slave interfaces. The slave interfaces could be physical interfaces, or just any virtual interfaces. For example, memif interfaces. The syntax to create a bond interface is create bond mode <lacp | xor | acitve-backup | broadcast | round-robin> To enslave an interface to the bond interface, enslave interface TenGigabitEthernet6/0/0 to BondEthernet0 Please see src/plugins/lacp/lacp_doc.md for more examples and additional options. LACP is a control plane protocol which manages and monitors the status of the slave interfaces. The protocol is part of 802.3ad standard. This patch implements LACPv1. LACPv2 is not supported. To enable LACP on the bond interface, specify "mode lacp" when the bond interface is created. The syntax to enslave a slave interface is the same as other bonding modes. Change-Id: I06581d3b87635972f9f0e1ec50b67560fc13e26c Signed-off-by: Steven <sluong@cisco.com>
2018-03-21UDP Encap countersNeale Ranns1-0/+5
Change-Id: Ib5639981dca0b11b2d62acf2c0963cc95c380f70 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-21reassembly: feature/concurrencyKlement Sekera1-0/+9
This change makes ip reassembly an interface feature, while adding concurrency support. Due to this, punt is no longer needed to test reassembly. Change-Id: I467669514ec33283ce935be0f1dd08f07684f0c7 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-03-19IGMP pluginJakub Grajciar1-0/+36
- host mode: igmp_listen - API to signal that the host has joined an (S,G) - route mode: igmp_enable - API to enable the reception of host IGMP messages igmp_event - API to report the host join/leave from an (S,G) Change-Id: Id180ec27dee617d33ab3088f5dcf6125d3aa9c8f Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-03-16QoS recording and markingNeale Ranns1-0/+36
Change-Id: Ie5a50def4ec1e4a3b3404a8b6ab9ec248bc16744 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-16IPv6 ND Router discovery control plane (VPP-1095)Juraj Sloboda1-0/+7
Change-Id: I4b5b60e7c6f618bb935eab1e96a2e79bbb14f58f Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-03-16IPv6 ND Router discovery data plane (VPP-1095)Juraj Sloboda1-0/+14
Add API call to send Router Solicitation messages. Save info from incoming Router Advertisement messages and notify listeners. Change-Id: Ie518b5492231e03291bd4c4280be4727bfecab46 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-03-14IPIP: Add IP{v4,v6} over IP{v4,v6} configured tunnel support.Ole Troan1-7/+21
Change-Id: I166301c9e2388bae5f70ec0179d663a2703e27f5 Signed-off-by: Ole Troan <ot@cisco.com>
2018-03-09MPLS Unifom modeNeale Ranns1-15/+6
- support both pipe and uniform modes for all MPLS LSP - all API programming for output-labels requires that the mode (and associated data) is specificed - API changes in MPLS, BIER and IP are involved - new DPO [sub] types for MPLS labels to handle the two modes. Change-Id: I87b76401e996f10dfbdbe4552ff6b19af958783c Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-016RD: Rewritten 6RD RFC5969 support.Ole Troan1-0/+19
Change-Id: Ic30fbcb2630f39e45345d7215babf5d7ed4b33a0 Signed-off-by: Ole Troan <ot@cisco.com>
2018-02-16Allow providers to override glean behaviourNeale Ranns1-0/+5
and update glean address on local interface MAC change Change-Id: I530826d60c7e9db2b0fa2d45754139d82c5ea807 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>