Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Ifd1e1907740e55420dc040eb2afbbbf9887aea3c
|
|
Type: feature
Change-Id: I0129ad6ace44a50a8a3b26db8e445cd06b2b49e8
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Use consistent API types.
Type: fix
Change-Id: Ib5b1efa76f0a9cecc0bc146f8f8a47c2442fc1db
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: feature
from the API doc, a table replace is:
"
The use-case is that, for some unspecified reason, the control plane
has a very different set of entries it wants in the table than VPP
currently has. The CP would thus like to 'replace' VPP's current table
only by specifying what the new set of entries shall be, i.e. it is not
going to delete anything that already eixts.
the CP delcartes the start of this procedure with this begin_replace
API Call, and when it has populated all the entries it wants, it calls
the below end_replace API. From this point on it is of coursce free
to add and delete entries as usual.
The underlying mechanism by which VPP implements this replace is
purposefully left unspecified.
"
In the FIB, the algorithm is implemented using mark and sweep.
Algorithm goes:
1) replace_begin: this marks all the entries in that table as 'stale'
2) download all the entries that should be in this table
- this clears the stale flag on those entries
3) signal the table converged: ip_table_replace_end
- this removes all entries that are still stale
this procedure can be used when an agent first connects to VPP,
as an alternative to dump and diff state reconciliation.
Change-Id: I168edec10cf7670866076b129ebfe6149ea8222e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: refactor
Change-Id: I204f3f8eebc5f5d5a377e91262f91c615fd00168
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
APIs for dedicated IPSec tunnels will remain in this release and are
used to programme the IPIP tunnel protect. APIs will be removed in a
future release.
see:
https://wiki.fd.io/view/VPP/IPSec
Type: feature
Change-Id: I0f01f597946fdd15dfa5cae3643104d5a9c83089
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I7c4a12165fa0928fb2b8d99fc1c8d5de16377e7e
|
|
Python3 fixes.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I648b2142d45dfab9146a02eeb1b12de11103ff9f
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: refactor
Change-Id: Ib4a8e7e64093b2db1deda6663325080bc8337605
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
To improve gcov/lcov code coverage stats, it's necessary to send
incorrect debug CLI commands; to force vpp into debug CLI error paths.
cli_return_response() sends commands and returns the response object,
so test vectors can handle failures.
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I4fab591c9d2e30c996f016e18e4fd69b9c5bed06
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: If6c102a53d074cba7eca6b6af9855aa4486f38cc
|
|
Type: fix
Change-Id: Ic4fb53e6d10a1de155a3088be81d53d9efeb0c0f
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: feature
Change-Id: I3fe27a8ef577741d9a5c4f090ec91cf68fb44fe3
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: Ia63d920788add2584060a240321acced7a471640
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: Ie2d2c74ed3832d137e808e0b52348b4e660feb6f
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: Idbba4ab6a412b75338e3149e51476693f0862f16
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I4b91ebe8aadbec8b95716ed1cde4b0a13eee3a3f
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Type: feature
- Define the ip_dscp_t and use in the IP headers
- Add DSCP setting to the DHCP client for use with packet TX
Change-Id: If220dde0017ea78793747d65f53e11daf23a28fa
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
Change-Id: I514b40026986f3828c8727453456b20a0a45f3af
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
If numa-only is set, Only slaves on local numa node
transmit pkts if have at least one, otherwise the bond
interface works as usual.
CLI change:
create bond mode lacp [load-balance { l2 | l23 | l34 } {numa-only}]
[hw-addr <mac-address>] [id <if-id>]
The new member "u8 numa_only;" is also added to bond_create_if_args_t.
Type: feature
Change-Id: Icdccedafb0738d8c9d4a5acce909ce562428c071
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
|
|
This changeset removes keys that are invalid in papi kwargs.
Type: test
Change-Id: I6568f91cd240dc1927540396210b429f6ce82c0a
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: test
Change-Id: Ib32c87b7f07c0552a6801a895332a0156c3c37f0
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Change-Id: I01772cfc3a0118a5c49bf346339788824e6931b2
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
A number of VppGbpContractRules were missing the hash_mode_t
and were being replaced by an optional kwarg.
Type: fix
Change-Id: I6ca03c93b69e4355c237a6c9402e1e178b701b21
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
please consult the new tunnel proposal at:
https://wiki.fd.io/view/VPP/IPSec
Type: feature
Change-Id: I52857fc92ae068b85f59be08bdbea1bd5932e291
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Enhance the route add/del APIs to take a set of paths rather than just one.
Most unicast routing protocols calcualte all the available paths in one
run of the algorithm so updating all the paths at once is beneficial for the client.
two knobs control the behaviour:
is_multipath - if set the the set of paths passed will be added to those
that already exist, otherwise the set will replace them.
is_add - add or remove the set
is_add=0, is_multipath=1 and an empty set, results in deleting the route.
It is also considerably faster to add multiple paths at once, than one at a time:
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11
100000 routes in .572240 secs, 174751.80 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12
100000 routes in .528383 secs, 189256.54 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13
100000 routes in .757131 secs, 132077.52 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14
100000 routes in .878317 secs, 113854.12 routes/sec
vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14
100000 routes in .900212 secs, 111084.93 routes/sec
Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
encapped SPI-0 packets
Type: fix
Fixes: b71fa75d48
Change-Id: I2d81b373f7659e702759939c096b315afa36f621
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- add to the Punt API to allow different descriptions of the desired packets: UDP or exceptions
- move the punt nodes into punt_node.c
- improve tests (test that the correct packets are punted to the registered socket)
Change-Id: I1a133dec88106874993cba1f5a439cd26b2fef72
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ida6a8f96bd858246e993250087bed45e7084ede1
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Use the enums provided from the api definitions instead.
Change-Id: I43b7591df920c984e439efc4b3ec3c4121c539d8
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
* Configure tests to raise exception if cli_inband fails.
* Fix failing tests.
* Add filename detail to pcap.stat clib_error_return for debugging.
Note: this change identifies spurious issues with packet-generator such as:
CliFailedCommandError: packet-generator capture: pcap file
'/tmp/vpp-unittest-Test6RD-v09RPA/pg0_out.pcap' does not exist.
These issues resolve themselves on remaining test passes.
Change-Id: Iecbd09daee954d892306d11baff3864a43c5b603
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I9e3af8674e8aae27079fd03f6286f165d777814f
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: If936b198bcac7a317d52f958561c3e19d158450a
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I0eb85252d4b489ba25dcf59252e2bcf3b0cd5c6a
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Add missing create_bvi/delete_bvi to defaultmapping.
Correct typo in interface.api documentation.
Change-Id: I8aa187f3b33c21fb2fcd55311ef79777c81d94d4
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I2492400a67b39a3adbc24ab7cf1ba17a409e95a8
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Handle the case where buffer overflows.
Then SOCK_SEQPACKET assumption that multiple API messages
are not returned by recv() is broken. Use SOCK_STREAM for
API exchanges instead.
Add support for running tests over sockets.
make test SOCKET=1
Change-Id: Ibe5fd69b1bf617de4c7ba6cce0a7c2b3f97a2821
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
This reverts commit bed1421b9f1b3643d93384084972337b596aec73.
/vpp/master3/src/plugins/nat/nat_api.c: In function ‘send_nat_worker_details’:
/vpp/master3/src/vppinfra/clib.h:62:33: error: division ‘sizeof (u8 * {aka unsigned char *}) / sizeof (u8 {aka unsigned char})’ does not compute the number of array elements [-Werror=sizeof-pointer-div]
#define ARRAY_LEN(x) (sizeof (x)/sizeof (x[0]))
^
/vpp/master3/src/plugins/nat/nat_api.c:205:43: note: in expansion of macro ‘ARRAY_LEN’
rmp = vl_msg_api_alloc (sizeof (*rmp) + ARRAY_LEN (w->name) - 1);
^~~~~~~~~
Change-Id: Ie82672c145fb2f6580827f95e535435307bc7a23
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I519d7efc8ee3c86381d96be2e2a46017cd948895
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Change-Id: I5010cd34123c6498230dedac6ba8dd774a1085f9
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I02c857da4cf6da5e0e55c1e48b63716af7ade0a9
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: Ia8cea13f7b937294e6a080a55fb2ceff30063acf
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
failing test disabled on ARM
Change-Id: I6b7535cd8f51fdaf9786ba77f9f61a7d8d049bbd
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
test/vpp_l2.py:213:26: F821 undefined name 'L2_VTR_OP'
self.itf.set_vtr(L2_VTR_OP.L2_DISABLED)
Move L2_VTR_OP enum to vpp_sub_interface.py where the VTR code is found.
Change-Id: I9eb9a3a2c679813c221ce1d0c4fa8aac6076c443
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I53ab8d17914e6563110354e4052109ac02bf8f3b
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I4d73b712da911588d511a8401b73cdc3c66346fe
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I96a1d4b2b3ae22cf164c0acd6db9b323cd70f51a
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I6a76907dc7bed2a81282b63669bea2219d6903c9
Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
This reverts commit e2e8f02165f27ae04e6d20ce0c628e29271a8db6.
Change-Id: Ie23dcb8a5b3e96f77e0d117a6887c43064c79669
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Iaf106962598d04708e8740e016d5c55ff35432c9
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|