aboutsummaryrefslogtreecommitdiffstats
path: root/test/vpp_papi_provider.py
AgeCommit message (Collapse)AuthorFilesLines
2017-07-04TEST:add L2BD arp term testsEyal Bari1-0/+8
Change-Id: I42414da9663ecfc8dfe5baf3e6615cf3b9b02e22 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-06-21NAT64: custom prefixMatus Fabian1-5/+27
Change-Id: If397b49861468eed29b964fa64b186f80eb0eceb Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-06-21L2-VTR: add vtr testsEyal Bari1-0/+8
re-enable l2 fib flush tests reorder l2bd multi instance tests - move flags test as last enabling of uu-flood will now flood when entry is stale Change-Id: I052663ec3eb4acee5f296fb7525dd535924e0003 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-06-08NAT64: Add NAT64 support for snat plugin (VPP-699)Matus Fabian1-0/+118
Basic NAT64 feature (no hairpinning, no multi-thread). Change-Id: I392fccbce93e70c117f4a9a7ec7cf08d6c537f2d Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-06-06Rework vxlan-gpe to support FIB 2.0 and bypass modeHongjun Ni1-0/+35
Change-Id: I0324f945bdb4dd3b19151be6f3ce24a47a000104 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2017-05-16L2FIB: add flush testEyal Bari1-0/+21
add tests for flush int/bd/all Change-Id: Ia589ec5925b9c8acbb2fc16dafbf4842aa1a6eff Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-05-15Add GTP-U plugin. VPP-694Hongjun Ni1-0/+32
Basic GTP-U feature Change-Id: I31226f890a92c5303ac06e112ed7820cae52d9bd Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2017-04-26IP Flow Hash Config fixesNeale Ranns1-0/+19
- the flow hash config is (and was) cached on the load-balance object so the fib_table_t struct is not used a switch time. Therefore changes to the table's flow hash config need to be propagated to all load-balances and hance all FIB entries in the table. - enable API for setting the IPv6 table flow hash config - use only the hash config in the fib_table_t object and not on the ipX_fib_t - add tests. Change-Id: Ib804c11162c6d4972c764957562c372f663e05d4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-26CGN: Session dump, test naming for ports fixedMartin Gálik1-0/+15
Change-Id: Ib542b2b3ee023fbe3d0e01ceaf4b4ab7a0ec80dc Signed-off-by: Martin Gálik <magalik@cisco.com>
2017-04-26CGNAT: close session API and CLI commands.Martin Gálik1-0/+46
Change-Id: I9c8636bd2c4b8da2907e8e4a4f2be1a2c3a8e0bb Signed-off-by: Martin Gálik <magalik@cisco.com>
2017-04-12CGN: configurable timeoutsMatus Fabian1-0/+27
add API and CLI configuration of deterministic NAT session timeout for TCP, UDP and ICMP protocol Change-Id: I577440452e7eaedcb5d80501a7fd4b76e31e8c9c Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-04-07MPLS McastNeale Ranns1-2/+14
1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-06BFD-FIB interactionsNeale Ranns1-2/+3
- single-hop BFD: attach a delegate to the appropriate adjacency - multi-hop BFD [not supported yet]: attach a delegate to the FIB entry. adjacency/fib_entry state tracks the BFD session state. when the state is down the object does not contribute forwarding hence and hence dependent objects will not use it. For example, if a route is ECMP via two adjacencies and one of them is BFD down, then only the other is used to forward (i.e. we don't drop half the traffic). Change-Id: I0ef53e20e73b067001a132cd0a3045408811a822 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-15Python API: Change from cPython to CFFI.Ole Troan1-1/+1
Change-Id: I03e52466fb3f909ae52b8fba601168f3eadbd972 Signed-off-by: Ole Troan <ot@cisco.com>
2017-03-09IMplementation for option to not create a FIB table entry when adding a ↵Neale Ranns1-0/+3
neighbor entry Change-Id: I952039e101031ee6a06e63f4c73d8eb359423e1a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-09MAP pre-resolve - use FIB to track pre-resolved next-hopNeale Ranns1-0/+28
Change-Id: I9ea16881caf7aee57f0daf4ac2e8b82c672f87e9 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-08SNAT: deterministic map dumpMartin1-0/+7
Change-Id: Iead6dc6a0fe15a0b8e148e780c3aeadd0b378824 Signed-off-by: Martin <magalik@cisco.com>
2017-03-08SNAT: user_session_dump is_ip4 and vat unformating addedMartin1-2/+4
Change-Id: I0ffab147c3218a75b7c3bb829983f538c7b637ee Signed-off-by: Martin <magalik@cisco.com>
2017-03-08Proxy ND (RFC4389 - or a sub-set thereof). This allows the 'emulation' of ↵Neale Ranns1-0/+6
bridging. That is hosts in one sub-net reachable via differenet interfaces. Introducate a new API command: ip6 nd proxy <host-address> <interface> this indicates 2 things; 1) that host <host-address> is reachable out of interface <interface>. VPP will thus install that route. 2) NS requests sent to <host-address> will be responeded to (i.e. proxied). Change-Id: I863f967fdb5097ab3b574769c70afdbfc8d5478a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-07CGN: Deterministic NAT (VPP-623)Matus Fabian1-0/+48
Inside user is statically mapped to a set of outside ports. Support endpoint dependent mapping to deal with overloading of the outside ports. Change-Id: I8014438744597a976f8ae459283e8b91f63b7f72 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-03-07Add setting of tenant VRF id for SNAT addresses (VPP-641)Juraj Sloboda1-1/+4
Change-Id: I9c0bb35ba16e04206ac481495f6638d3763754a1 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2017-03-03IPv6 RA improvementsNeale Ranns1-0/+25
1) tests for RA options 2) memleaks deleteing a ip6_radv_info_t 3) MLD prefix code refactoring Change-Id: I34db103994bd8fbdbbec50b202d72770dd145681 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-03python API: work towards python/vpp api separationKlement Sekera1-6/+6
This change improves vpp_papi behaviour by introducing alternate way of calling vpp APIs. The common code is the same: vpp = VPP(...) vpp.connect(...) Calling VPP API is different, instead of deprecated: vpp.show_version() # deprecated one should write vpp.api.show_version() this allows VPP messages like "connect" and "disconnect" to be used, once the old API is dropped (in 17.07). Also part of this patch is a check for name conflict, to prevent VPP object overwriting its own functionality with generated code based on json files. Change-Id: I22e573b6a45f8b2a1f0340c5c2597c194fe42ca4 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-03-02SNAT: user's dump and session dump of a certain snat user.magalik1-0/+23
Change-Id: If75a35dbdcb43c1ce0128b8649f2ca3970d3fff5 Signed-off-by: Martin <magalik@cisco.com>
2017-03-02Remove the unused VRF ID parameter from the IP neighbour Add/Del APINeale Ranns1-4/+1
Change-Id: Icf0d72f6af1f98c86f78e586c354515ac69804aa Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-02BFD: command line interfaceKlement Sekera1-2/+10
Implement command line interface to the BFD binary APIs. Add corresponding unit tests. Change-Id: Ia0542d0bc4c8d78e6f7b777a08fd94ebfe4d524f Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-27[Proxy] ARP testsNeale Ranns1-0/+67
Change-Id: I40d6d763b55a26cdee0afef85d1acdd19dd10dd6 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-26BFD: echo functionKlement Sekera1-0/+4
Change-Id: Ib1e301d62b687d4e42434239e7cd412065c28da0 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-21dhcp: multiple additionsNeale Ranns1-4/+2
DHCP additions: 1) DHCPv4 will only relay a message back to the client, if the Option82 information is present. So make this the default. 2) It is no longer possible to select via the API to "insert circuit ID" - since this is now default 3) Remove the version 2 API since it's now the same as version 1. 4) Adding the VSS option is now conditional only on the presence of VSS config (not the 'insert' option in the set API) 5) DHCP proxy dump via API Change-Id: Ia7271ba8c1d4dbf34a02c401d268ccfbb1b74f17 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-21Add basic 4o4 LISP unit testFilip Tehlar1-0/+135
Change-Id: I2d812153d7afe7980346382b525af89b3c47e796 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-02-21test: ip6 vrf instances multi-context test (CSIT-497)Jan Gelety1-2/+6
- add/delete IPv6 VRF instances and verify results by parsing output of ip6_fib_dump API command and by traffic - small changes in assert_nothing_captured and get_capture to get logged unexpected packets Change-Id: I32207447be2df942e335aa9890ff52fb88e46597 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2017-02-20Python test IP and MPLS objects conform to infra.Neale Ranns1-0/+6
Add IP[46] MFIB dump. Change-Id: I4a2821f65e67a5416b291e4912c84f64989883b8 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-14make test: improve stabilityKlement Sekera1-2/+6
Disable automatic garbage collection and run it manually before running each test case to minimize stalls. Improve vpp subprocess cleanup. Reduce helper thread count to one and properly clean that thread once it's not needed. Change-Id: I3ea78ed9628552b5ef3ff29cc7bcf2d3fc42f2c3 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-08BFD: modify session parametersKlement Sekera1-0/+13
Change-Id: I666e5c0cc71a3693640960c93cdd1907f84fbe23 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-03SNAT: Port allocation per protocolMatus Fabian1-1/+4
Ports are allocated per protocol (UDP, TCP, ICMP) 1:1 NAT with port is configured for specific protocol Change-Id: I37ae5eed3715b223d0620d4fdaed7a482bb7a834 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-02-02BFD: SHA1 authenticationKlement Sekera1-8/+69
Add authentication support to BFD feature. Out of three existing authentication types, implement SHA1 (sole RFC requirement). Simple password is insecure and MD5 is discouraged by the RFC, so ignore those. Add/change APIs to allow configuring BFD authentication keys and their usage with BFD sessions. Change-Id: Ifb0fb5b19c2e72196d84c1cde919bd4c074ea415 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-01-27IP Multicast FIB (mfib)Neale Ranns1-1/+33
- IPv[46] mfib tables with support for (*,G/m), (*,G) and (S,G) exact and longest prefix match - Replication represented via a new replicate DPO. - RPF configuration and data-plane checking - data-plane signals sent to listening control planes. The functions of multicast forwarding entries differ from their unicast conterparts, so we introduce a new mfib_table_t and mfib_entry_t objects. However, we re-use the fib_path_list to resolve and build the entry's output list. the fib_path_list provides the service to construct a replicate DPO for multicast. 'make tests' is added to with two new suites; TEST=mfib, this is invocation of the CLI command 'test mfib' which deals with many path add/remove, flag set/unset scenarios, TEST=ip-mcast, data-plane forwarding tests. Updated applications to use the new MIFB functions; - IPv6 NS/RA. - DHCPv6 unit tests for these are undated accordingly. Change-Id: I49ec37b01f1b170335a5697541c8fd30e6d3a961 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-01-26DHCPv[46] proxy testsNeale Ranns1-0/+36
Change-Id: I6aaf9c602cd515ed9d4416d286f9191d048c1a87 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-01-25make test: elegantly handle expected API failuresKlement Sekera1-7/+39
Allow writing simple code to expect API failure when needed: with self.vapi.expect_negative_api_retval(): do_api_call() # expected to return negative retval in response Change-Id: Id58d91d9ce38d20ad6ff7a43a6897e79ffbd23bf Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-01-25SNAT: static mappings for dhcp addressed interfaces (VPP-590)Matus Fabian1-1/+4
updated API added test Change-Id: I3f6017ecf09b924cb320c1b5f323cd33f7a37447 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-01-14SNAT: IPFIX logging (VPP-445)Matus Fabian1-0/+17
Change-Id: I8450217dd43a1cd9f510e40dfb22274ffc33a4c6 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-01-13SNAT: add API and test for NAT pool address from interfaceMatus Fabian1-0/+18
Change-Id: I2a868f736fae8d37b438c604a9284653ea415541 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-01-11make test: improve documentation and PEP8 complianceKlement Sekera1-6/+6
Change-Id: Ib4f0353aab6112fcc3c3d8f0bcbed5bc4b567b9b Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-01-11test: ip4 vrf instances multi-context test (CSIT-492)Jan1-0/+48
- add/delete IPv4 VRF instances and verify results by parsing output of ip_fib_dump API command and by traffic Change-Id: I61ed5013adca29afd00b942f65be7bf964f38d85 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2017-01-10IPv6 NS RS tests and fixesNeale Ranns1-0/+16
includes Fix for VPP-584 with API change to remove prefix length from LL programming Change-Id: If860751c35e60255fb977f73bc33e8c2649e728e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-01-09make test: Loopback interface CRUD testMatej Klotton1-2/+6
Change-Id: I0581da7a682bfe4dd6520ecf1b2ea6bd8c20b1b3 Signed-off-by: Matej Klotton <mklotton@cisco.com>
2017-01-02make test: improve test_flowperpktKlement Sekera1-24/+44
Change-Id: Id1b2bef2a93ac931a420d7a3c322d65c1fbce055 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2016-12-22SNAT: Remove the oldest translation fix (VPP-568)Matus Fabian1-0/+6
Fixed bug and add test. Change-Id: Ibe70dfc81e6c264223050d316cf6a2a3a0e1524e Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-12-21make test: Add classifier - ip/mac/pbr casesSteve Shin1-0/+97
Change-Id: I9cdf022a48b2b63e7ce07f4f5322ffda28c08ff0 Signed-off-by: Steve Shin <jonshin@cisco.com>
2016-12-13make test: Use VXLAN built in scapy 2.3.3Matej Klotton1-2/+1
- fix documentation issues. - fix mpls test. Change-Id: Ieef6b4b5e4aca99e89bd03e45a991be89d42adba Signed-off-by: Matej Klotton <mklotton@cisco.com>