Age | Commit message (Collapse) | Author | Files | Lines |
|
Translation of fragmented packets.
Change-Id: I9b1f2e9433ce273638080f32c2d3bff39c49899d
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
A UDP-encap object that particiapates in the FIB graph and contributes
DPO to teh output chain. It thereofre resembles a tunnel but without the
interface. FIB paths (and henace routes) can then be created to egress
through the UDP-encap. Said routes can have MPLS labels, hence this also
allows MPLSoUPD.
Encap is uni-directional. For decap, one still registers with the UDP port
dispatcher.
Change-Id: I23bd345523b20789a1de1b02022ea1148ca50797
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Dual-Stack Lite enables a broadband service provider to share IPv4 addresses among customers by combining two well-known technologies: IPv4-in-IPv6 and NAT.
Change-Id: I039740f8548c623cd1ac89b8ecda1a6cc4aafb9c
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
As per proposal on the mailing list, this patch fixes
the represntation of MAC address in VPP API calls for
· L2fib_add_del
· L2_fib_table_details
Change-Id: I31e17efd1a6314cded69666e693cb8fc33158d02
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Administratively delete NAT44 session for specific inside/outside addresses and port pair.
Change-Id: If5ab500ac3592c7153d6d8f2cc0297df7309fbc3
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Dynamically calculate the required buffer size to pack into based on
message definition. Also add input parameter length checking.
Change-Id: I7633bec596e4833bb328fbf63a65b866c7985de5
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Vat supports setting value for the parameter, but
'not_last' is ignored by ip_add_del_route handler,
so can be removed.
This patch
- updates ip.api,
- removes vat handlers
- updates vpp_papi_provider.py
(also mpls_route_add_del with unused not_last)
Change-Id: Ife15de123db4bc8247103a29b90bce1988e46534
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
Change-Id: I5d5d4f22b6369d504455a644f73076d772fbcfb4
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- new IPv4 and IPv6 feature arcs on the punt and drop nodes
- new features:
- redirect punted traffic to an interface and nexthop
- police punted traffic.
Change-Id: I53be8bf4e06545add8a3619e462de5ffedd0a95c
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Notes on this first implementation:
* First version of the implementation does NOT support GENEVE OPTIONS
HEADER: it isn't well understood what the purpose of the OPTIONS will be and/or
what content would be placed in the variable option data;
Once the IETF work will evolve and further information will be available
it could be possible to modify the frame rewrite to contemplate the
actual GENEVE OPTIONS.
Change-Id: Iddfe6f408cc45bb0800f00ce6a3e302e48a4ed52
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
A distributed virtual router works by attmpeting to switch a packet, but on failing to find a local consumer (i.e. the packet is destined to a locally attached host) then the packet is sent unmodified 'upstream' to where the rest of the 'distributed' router is present. When L3 switching a packet this means the L2 header must not be modifed. This patch adds a 'l2-bridge' object to the L3 FIB which re-injects packets from the L3 path back into the L2 path - use with extreme caution.
Change-Id: I069724eb45956647d7980cbe40a80a788ee6ee82
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
fixes an issue where events were not sent if BD doesn't enable mac aging
Change-Id: Iddc53cb5c45e560633e6c5cff2731dccfc70ad5b
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
The replacement of [] with pool_elt_at_index and subsequent fixing it
was incorrect - it was equivalent to &[], since it returns a pointer to
the element. I've added VPP-993 previously to create a testcase,
so this commit partially fulfills that one as well.
Change-Id: I5b15e3ce48316f0429232aacf885e8f7c63d9522
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: I1d3818027b8a1fcb1ec12016e3476b5c22a2d5a5
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
wildcard ND events publisher was sending the last event mutiple times
Change-Id: I6c30f2de03fa825e79df9005a3cfaaf68ff7ea2f
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
previous mechanism was emitting duplicates of last event, when handling multiple arp queries.
tests:
* arp events sent for graps
* duplicate suppression
* verify no events when disabled
Change-Id: I84adc23980d43b819261eccf02ec056b5cec61df
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: Ia5c869b2d8b8ad012b9e89fb6720c9c32d9ee065
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
part 2;
- this adds the code to create an IP and MPLS table via the API.
- but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass.
Change-Id: Id124d884ade6cb7da947225200e3bb193454c555
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ie40c837358454cfe9475cb2c14fdf20b24fa6602
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
added load-balancing static mappings with unequal load support
Change-Id: Ie505e41f24d46f812b94dd28bdafe3dc170a6060
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I30a7e3da7a4efc6038a91e27b48045d4b07e2764
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: Ib1d2fc5a83d9d007a0468591a73881675f1bec9b
Signed-off-by: Kris Michielsen <kmichiel@cisco.com>
|
|
make proto optional in nat64_bib_dump and nat64_st_dump
Change-Id: Idd102ce2b1555d38783fd22c84e46b4c48570edc
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I06a10a4291e61aec3f1396d2514ed6fe3901897a
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
Supports 64K PPPoE sessions
This plugin adds three graph nodes:
1) pppoe-input for PPPoE decapsulation
2) pppoe-encap for PPPoE encapsulation
3) pppoe-tap-dispatch for control plane process
Below is the configuration to make PPPoE CP and DP work:
vim /etc/vpp/startup.conf
tuntap {
enable
ethernet
name newtap
}
create pppoe tap tap-if-index 1
//Configure it after a subscriber's PPPoE discovery and PPP link establishment succeeds:
create pppoe session client-ip 100.1.2.1 session-id 1 client-mac 00:11:01:00:00:01
show pppoe fib
show pppoe session
Change-Id: I73e724b6bf7c3e4181a9914c5752da1fa72d7e60
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
[support for VPWS/VPLS]
- switch to using dpo_proto_t rather than fib_protocol_t in fib_paths so that we can describe L2 paths
- VLIB nodes to handle pop/push of MPLS labels to L2
Change-Id: Id050d06a11fd2c9c1c81ce5a0654e6c5ae6afa6e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Idb97e573961b3bc2acdeef77582314590795f8c3
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
added span feature nodes for l2-input / l2-output
Change-Id: Ib6e0ce60d0811901b6edd70209e6a4c4a35cd8ff
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
in2out translation as an output feature on the outside interface (postrouting)
Change-Id: I32c0311be09bdf102b9a0885b8b89c7588cb558f
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
the existing seeting of client_id to a VPP version number was unused and so overridden
Change-Id: If9ebea936336f1fcca8d07e67186c95f8f8f0ccd
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I63c59e3c13859b51999d283774f7783ef0a6a5ed
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I42414da9663ecfc8dfe5baf3e6615cf3b9b02e22
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: If397b49861468eed29b964fa64b186f80eb0eceb
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
re-enable l2 fib flush tests
reorder l2bd multi instance tests - move flags test as last
enabling of uu-flood will now flood when entry is stale
Change-Id: I052663ec3eb4acee5f296fb7525dd535924e0003
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Basic NAT64 feature (no hairpinning, no multi-thread).
Change-Id: I392fccbce93e70c117f4a9a7ec7cf08d6c537f2d
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I0324f945bdb4dd3b19151be6f3ce24a47a000104
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
add tests for flush int/bd/all
Change-Id: Ia589ec5925b9c8acbb2fc16dafbf4842aa1a6eff
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Basic GTP-U feature
Change-Id: I31226f890a92c5303ac06e112ed7820cae52d9bd
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
- the flow hash config is (and was) cached on the load-balance object so the fib_table_t struct is not used a switch time. Therefore changes to the table's flow hash config need to be propagated to all load-balances and hance all FIB entries in the table.
- enable API for setting the IPv6 table flow hash config
- use only the hash config in the fib_table_t object and not on the ipX_fib_t
- add tests.
Change-Id: Ib804c11162c6d4972c764957562c372f663e05d4
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ib542b2b3ee023fbe3d0e01ceaf4b4ab7a0ec80dc
Signed-off-by: Martin Gálik <magalik@cisco.com>
|
|
Change-Id: I9c8636bd2c4b8da2907e8e4a4f2be1a2c3a8e0bb
Signed-off-by: Martin Gálik <magalik@cisco.com>
|
|
add API and CLI configuration of deterministic NAT session timeout for TCP, UDP
and ICMP protocol
Change-Id: I577440452e7eaedcb5d80501a7fd4b76e31e8c9c
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
1 - interface-DPO
Used in the Data-plane to change a packet's input interface
2 - MPLS multicast FIB entry
Same as a unicast entry but it links to a replicate not a load-balance DPO
3 - Multicast MPLS tunnel
Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to .
4 - Resolve a path via a local label (of an mLDP LSP)
For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP.
5 - MPLS disposition path sets RPF-ID
For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet.
6 - RPF check with per-entry RPF-ID
An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface.
Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- single-hop BFD: attach a delegate to the appropriate adjacency
- multi-hop BFD [not supported yet]: attach a delegate to the FIB entry.
adjacency/fib_entry state tracks the BFD session state. when the state is down the object does not contribute forwarding hence and hence dependent objects will not use it.
For example, if a route is ECMP via two adjacencies and one of them is BFD down, then only the other is used to forward (i.e. we don't drop half the traffic).
Change-Id: I0ef53e20e73b067001a132cd0a3045408811a822
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I03e52466fb3f909ae52b8fba601168f3eadbd972
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
neighbor entry
Change-Id: I952039e101031ee6a06e63f4c73d8eb359423e1a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I9ea16881caf7aee57f0daf4ac2e8b82c672f87e9
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Iead6dc6a0fe15a0b8e148e780c3aeadd0b378824
Signed-off-by: Martin <magalik@cisco.com>
|
|
Change-Id: I0ffab147c3218a75b7c3bb829983f538c7b637ee
Signed-off-by: Martin <magalik@cisco.com>
|
|
bridging. That is hosts in one sub-net reachable via differenet interfaces.
Introducate a new API command:
ip6 nd proxy <host-address> <interface>
this indicates 2 things;
1) that host <host-address> is reachable out of interface <interface>. VPP will thus install that route.
2) NS requests sent to <host-address> will be responeded to (i.e. proxied).
Change-Id: I863f967fdb5097ab3b574769c70afdbfc8d5478a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|