summaryrefslogtreecommitdiffstats
path: root/test/vpp_papi_provider.py
AgeCommit message (Collapse)AuthorFilesLines
2017-10-10punt and drop features:Neale Ranns1-0/+57
- new IPv4 and IPv6 feature arcs on the punt and drop nodes - new features: - redirect punted traffic to an interface and nexthop - police punted traffic. Change-Id: I53be8bf4e06545add8a3619e462de5ffedd0a95c Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-06Initial GENEVE TUNNEL implementation and tests.Marco Varlese1-0/+32
Notes on this first implementation: * First version of the implementation does NOT support GENEVE OPTIONS HEADER: it isn't well understood what the purpose of the OPTIONS will be and/or what content would be placed in the variable option data; Once the IETF work will evolve and further information will be available it could be possible to modify the frame rewrite to contemplate the actual GENEVE OPTIONS. Change-Id: Iddfe6f408cc45bb0800f00ce6a3e302e48a4ed52 Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2017-10-05Distributed Virtual Router SupportNeale Ranns1-0/+2
A distributed virtual router works by attmpeting to switch a packet, but on failing to find a local consumer (i.e. the packet is destined to a locally attached host) then the packet is sent unmodified 'upstream' to where the rest of the 'distributed' router is present. When L3 switching a packet this means the L2 header must not be modifed. This patch adds a 'l2-bridge' object to the L3 FIB which re-injects packets from the L3 path back into the L2 path - use with extreme caution. Change-Id: I069724eb45956647d7980cbe40a80a788ee6ee82 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-02L2-FIB:add mac learn events testEyal Bari1-0/+9
fixes an issue where events were not sent if BD doesn't enable mac aging Change-Id: Iddc53cb5c45e560633e6c5cff2731dccfc70ad5b Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-09-27acl-plugin: take 2 at VPP-991 fix, this time with a test case which verifies it.Andrew Yourtchenko1-0/+10
The replacement of [] with pool_elt_at_index and subsequent fixing it was incorrect - it was equivalent to &[], since it returns a pointer to the element. I've added VPP-993 previously to create a testcase, so this commit partially fulfills that one as well. Change-Id: I5b15e3ce48316f0429232aacf885e8f7c63d9522 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-09-26acl-plugin: test: move the API calls to vpp_papi_provider.pyAndrew Yourtchenko1-0/+29
Change-Id: I1d3818027b8a1fcb1ec12016e3476b5c22a2d5a5 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-09-22IP-MAC,ND:wildcard events,fix sending multiple eventsEyal Bari1-0/+6
wildcard ND events publisher was sending the last event mutiple times Change-Id: I6c30f2de03fa825e79df9005a3cfaaf68ff7ea2f Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-09-18L2BD,ARP-TERM:fix arp query report mechanism+testEyal Bari1-3/+9
previous mechanism was emitting duplicates of last event, when handling multiple arp queries. tests: * arp events sent for graps * duplicate suppression * verify no events when disabled Change-Id: I84adc23980d43b819261eccf02ec056b5cec61df Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-09-12ACL-plugin add "replace" semantics for adding a new MacIP aclPavel Kotucek1-6/+14
Change-Id: Ia5c869b2d8b8ad012b9e89fb6720c9c32d9ee065 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-09-11FIB table add/delete APINeale Ranns1-12/+34
part 2; - this adds the code to create an IP and MPLS table via the API. - but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass. Change-Id: Id124d884ade6cb7da947225200e3bb193454c555 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-09-08ACL-plugin MACIP ACLs testsPavel Kotucek1-0/+55
Change-Id: Ie40c837358454cfe9475cb2c14fdf20b24fa6602 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-09-06NAT: Destination NAT44 with load-balancing (VPP-954)Matus Fabian1-0/+30
added load-balancing static mappings with unequal load support Change-Id: Ie505e41f24d46f812b94dd28bdafe3dc170a6060 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-08-23NAT: Rename snat plugin to nat (VPP-955)Matus Fabian1-100/+87
Change-Id: I30a7e3da7a4efc6038a91e27b48045d4b07e2764 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-08-22SRv6 testsKris Michielsen1-0/+118
Change-Id: Ib1d2fc5a83d9d007a0468591a73881675f1bec9b Signed-off-by: Kris Michielsen <kmichiel@cisco.com>
2017-08-16SNAT: Make proto optional in nat64_bib_dump (VPP-942)Matus Fabian1-4/+4
make proto optional in nat64_bib_dump and nat64_st_dump Change-Id: Idd102ce2b1555d38783fd22c84e46b4c48570edc Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-08-11Dedicated SW Interface EventNeale Ranns1-7/+2
Change-Id: I06a10a4291e61aec3f1396d2514ed6fe3901897a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
2017-08-09Add PPPoE PluginHongjun Ni1-0/+26
Supports 64K PPPoE sessions This plugin adds three graph nodes: 1) pppoe-input for PPPoE decapsulation 2) pppoe-encap for PPPoE encapsulation 3) pppoe-tap-dispatch for control plane process Below is the configuration to make PPPoE CP and DP work: vim /etc/vpp/startup.conf tuntap { enable ethernet name newtap } create pppoe tap tap-if-index 1 //Configure it after a subscriber's PPPoE discovery and PPP link establishment succeeds: create pppoe session client-ip 100.1.2.1 session-id 1 client-mac 00:11:01:00:00:01 show pppoe fib show pppoe session Change-Id: I73e724b6bf7c3e4181a9914c5752da1fa72d7e60 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2017-08-08L2 over MPLSNeale Ranns1-2/+2
[support for VPWS/VPLS] - switch to using dpo_proto_t rather than fib_protocol_t in fib_paths so that we can describe L2 paths - VLIB nodes to handle pop/push of MPLS labels to L2 Change-Id: Id050d06a11fd2c9c1c81ce5a0654e6c5ae6afa6e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-01P2P EthernetPavel Kotucek1-0/+25
Change-Id: Idb97e573961b3bc2acdeef77582314590795f8c3 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-07-24SPAN:add l2 mirrorEyal Bari1-2/+5
added span feature nodes for l2-input / l2-output Change-Id: Ib6e0ce60d0811901b6edd70209e6a4c4a35cd8ff Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-07-20SNAT: in2out translation as an output feature (VPP-903)Matus Fabian1-0/+23
in2out translation as an output feature on the outside interface (postrouting) Change-Id: I32c0311be09bdf102b9a0885b8b89c7588cb558f Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-07-18DHCP client option 61 "client_id"Neale Ranns1-0/+2
the existing seeting of client_id to a VPP version number was unused and so overridden Change-Id: If9ebea936336f1fcca8d07e67186c95f8f8f0ccd Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-07-18DHCP client - remove interface address when DHCP de-configuredNeale Ranns1-0/+15
Change-Id: I63c59e3c13859b51999d283774f7783ef0a6a5ed Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-07-04TEST:add L2BD arp term testsEyal Bari1-0/+8
Change-Id: I42414da9663ecfc8dfe5baf3e6615cf3b9b02e22 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-06-21NAT64: custom prefixMatus Fabian1-5/+27
Change-Id: If397b49861468eed29b964fa64b186f80eb0eceb Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-06-21L2-VTR: add vtr testsEyal Bari1-0/+8
re-enable l2 fib flush tests reorder l2bd multi instance tests - move flags test as last enabling of uu-flood will now flood when entry is stale Change-Id: I052663ec3eb4acee5f296fb7525dd535924e0003 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-06-08NAT64: Add NAT64 support for snat plugin (VPP-699)Matus Fabian1-0/+118
Basic NAT64 feature (no hairpinning, no multi-thread). Change-Id: I392fccbce93e70c117f4a9a7ec7cf08d6c537f2d Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-06-06Rework vxlan-gpe to support FIB 2.0 and bypass modeHongjun Ni1-0/+35
Change-Id: I0324f945bdb4dd3b19151be6f3ce24a47a000104 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2017-05-16L2FIB: add flush testEyal Bari1-0/+21
add tests for flush int/bd/all Change-Id: Ia589ec5925b9c8acbb2fc16dafbf4842aa1a6eff Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-05-15Add GTP-U plugin. VPP-694Hongjun Ni1-0/+32
Basic GTP-U feature Change-Id: I31226f890a92c5303ac06e112ed7820cae52d9bd Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2017-04-26IP Flow Hash Config fixesNeale Ranns1-0/+19
- the flow hash config is (and was) cached on the load-balance object so the fib_table_t struct is not used a switch time. Therefore changes to the table's flow hash config need to be propagated to all load-balances and hance all FIB entries in the table. - enable API for setting the IPv6 table flow hash config - use only the hash config in the fib_table_t object and not on the ipX_fib_t - add tests. Change-Id: Ib804c11162c6d4972c764957562c372f663e05d4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-26CGN: Session dump, test naming for ports fixedMartin Gálik1-0/+15
Change-Id: Ib542b2b3ee023fbe3d0e01ceaf4b4ab7a0ec80dc Signed-off-by: Martin Gálik <magalik@cisco.com>
2017-04-26CGNAT: close session API and CLI commands.Martin Gálik1-0/+46
Change-Id: I9c8636bd2c4b8da2907e8e4a4f2be1a2c3a8e0bb Signed-off-by: Martin Gálik <magalik@cisco.com>
2017-04-12CGN: configurable timeoutsMatus Fabian1-0/+27
add API and CLI configuration of deterministic NAT session timeout for TCP, UDP and ICMP protocol Change-Id: I577440452e7eaedcb5d80501a7fd4b76e31e8c9c Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-04-07MPLS McastNeale Ranns1-2/+14
1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-06BFD-FIB interactionsNeale Ranns1-2/+3
- single-hop BFD: attach a delegate to the appropriate adjacency - multi-hop BFD [not supported yet]: attach a delegate to the FIB entry. adjacency/fib_entry state tracks the BFD session state. when the state is down the object does not contribute forwarding hence and hence dependent objects will not use it. For example, if a route is ECMP via two adjacencies and one of them is BFD down, then only the other is used to forward (i.e. we don't drop half the traffic). Change-Id: I0ef53e20e73b067001a132cd0a3045408811a822 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-15Python API: Change from cPython to CFFI.Ole Troan1-1/+1
Change-Id: I03e52466fb3f909ae52b8fba601168f3eadbd972 Signed-off-by: Ole Troan <ot@cisco.com>
2017-03-09IMplementation for option to not create a FIB table entry when adding a ↵Neale Ranns1-0/+3
neighbor entry Change-Id: I952039e101031ee6a06e63f4c73d8eb359423e1a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-09MAP pre-resolve - use FIB to track pre-resolved next-hopNeale Ranns1-0/+28
Change-Id: I9ea16881caf7aee57f0daf4ac2e8b82c672f87e9 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-08SNAT: deterministic map dumpMartin1-0/+7
Change-Id: Iead6dc6a0fe15a0b8e148e780c3aeadd0b378824 Signed-off-by: Martin <magalik@cisco.com>
2017-03-08SNAT: user_session_dump is_ip4 and vat unformating addedMartin1-2/+4
Change-Id: I0ffab147c3218a75b7c3bb829983f538c7b637ee Signed-off-by: Martin <magalik@cisco.com>
2017-03-08Proxy ND (RFC4389 - or a sub-set thereof). This allows the 'emulation' of ↵Neale Ranns1-0/+6
bridging. That is hosts in one sub-net reachable via differenet interfaces. Introducate a new API command: ip6 nd proxy <host-address> <interface> this indicates 2 things; 1) that host <host-address> is reachable out of interface <interface>. VPP will thus install that route. 2) NS requests sent to <host-address> will be responeded to (i.e. proxied). Change-Id: I863f967fdb5097ab3b574769c70afdbfc8d5478a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-07CGN: Deterministic NAT (VPP-623)Matus Fabian1-0/+48
Inside user is statically mapped to a set of outside ports. Support endpoint dependent mapping to deal with overloading of the outside ports. Change-Id: I8014438744597a976f8ae459283e8b91f63b7f72 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-03-07Add setting of tenant VRF id for SNAT addresses (VPP-641)Juraj Sloboda1-1/+4
Change-Id: I9c0bb35ba16e04206ac481495f6638d3763754a1 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2017-03-03IPv6 RA improvementsNeale Ranns1-0/+25
1) tests for RA options 2) memleaks deleteing a ip6_radv_info_t 3) MLD prefix code refactoring Change-Id: I34db103994bd8fbdbbec50b202d72770dd145681 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-03python API: work towards python/vpp api separationKlement Sekera1-6/+6
This change improves vpp_papi behaviour by introducing alternate way of calling vpp APIs. The common code is the same: vpp = VPP(...) vpp.connect(...) Calling VPP API is different, instead of deprecated: vpp.show_version() # deprecated one should write vpp.api.show_version() this allows VPP messages like "connect" and "disconnect" to be used, once the old API is dropped (in 17.07). Also part of this patch is a check for name conflict, to prevent VPP object overwriting its own functionality with generated code based on json files. Change-Id: I22e573b6a45f8b2a1f0340c5c2597c194fe42ca4 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-03-02SNAT: user's dump and session dump of a certain snat user.magalik1-0/+23
Change-Id: If75a35dbdcb43c1ce0128b8649f2ca3970d3fff5 Signed-off-by: Martin <magalik@cisco.com>
2017-03-02Remove the unused VRF ID parameter from the IP neighbour Add/Del APINeale Ranns1-4/+1
Change-Id: Icf0d72f6af1f98c86f78e586c354515ac69804aa Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-02BFD: command line interfaceKlement Sekera1-2/+10
Implement command line interface to the BFD binary APIs. Add corresponding unit tests. Change-Id: Ia0542d0bc4c8d78e6f7b777a08fd94ebfe4d524f Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-27[Proxy] ARP testsNeale Ranns1-0/+67
Change-Id: I40d6d763b55a26cdee0afef85d1acdd19dd10dd6 Signed-off-by: Neale Ranns <nranns@cisco.com>