summaryrefslogtreecommitdiffstats
path: root/test/vpp_papi_provider.py
AgeCommit message (Collapse)AuthorFilesLines
2018-02-15Revert "Allow interface types to override glean adjacency behaivour"Ole Trøan1-5/+0
This reverts commit 8b30e471df4d42214619e1d6c50cc8298426b45f. Change-Id: I99edb236eb0a7f8ba3fba333c3481a710ebcb59c Signed-off-by: Ole Troan <ot@cisco.com>
2018-02-15Allow interface types to override glean adjacency behaivourNeale Ranns1-0/+5
update the glean adj on a local interface MAC change Change-Id: Ia5c5cde424ed0fea3431532cc5abf22b364bbab5 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-02-15Optimize GRE Tunnel and add support for ERSPAN encapJohn Lo1-4/+10
Change GRE tunnel to use the interface type where the same encap node is used as output node for all GRE tunnels, instead of having dedicated output and tx node for each tunnel. This allows for more efficient tunnel creation and deletion at scale tested at 1000's of GRE tunnels. Add support for ERSPAN encap as another tunnel type, in addition to the existing L3 and TEB types. The GRE ERSPAN encap supported is type 2 thus GRE encap need to include sequence number and GRE- ERSPAN tunnel can be created with user secified ERSPAN session ID. The GRE tunnel lookup hash key is updated to inclue tunnel type and session ID, in addition to SIP/DIP and FIB index. Thus, GRE-ERSPAN tunnel can be created, with the appropriate session ID, to be used as output interface for SPAN config to send mirrored packets. Change interface naming so that all GRE tunnels, irrespective of tunnel type, uses "greN" where N is the instance number. Removed interface reuse on tunnel creation and deletion to enable unfied tunnel interface name. Add support of user specified instance on GRE tunnel creation. Thus, N in the "greN" interface name can optionally be specified by user via CLI/API. Optimize GRE tunnel encap DPO stacking to bypass load-balance DPO node since packet output on GRE tunnel always belong to the same flow after 5-tupple hash. Change-Id: Ifa83915744a1a88045c998604777cc3583f4da52 Signed-off-by: John Lo <loj@cisco.com>
2018-02-12Improve MTU handlingNeale Ranns1-0/+10
- setting MTU on an interface updates the L3 max bytes too - value cached in the adjacency is also updated - MTU exceeded generates ICMP to sender Change-Id: I343ec71d8e903b529594c4bd0543f04bc7f370b3 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-02-09GBP pluginNeale Ranns1-0/+27
Group Base Policy (GBP) defines: - endpoints: typically a VM or container that is connected to the virtual switch/router (i.e. to VPP) - endpoint-group: (EPG) a collection of endpoints - policy: rules determining which traffic can pass between EPGs a.k.a a 'contract' Here, policy is implemented via an ACL. EPG classification for transit packets is determined by: - source EPG: from the packet's input interface - destination EPG: from the packet's destination IP address. Change-Id: I7b983844826b5fc3d49e21353ebda9df9b224e25 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-02-08acl-plugin: add whitelisted ethertype mode (VPP-1163)Andrew Yourtchenko1-0/+10
Currently, ACL plugin largely does not care about the ethertypes other than 0x0800 (IPv4) and 0x86dd (IPv6), the only exception being 0x0806 (ARP), which is dealt with by the MACIP ACLs. The other ethertypes in L2 mode are just let through. This adds a new API message acl_interface_set_etype_whitelist, which allows to flip the mode of a given interface into "ethertype whitelist mode": the caller of this message must supply the two lists (inbound and outbound) of the ethertypes that are to be permitted, the rest of the ethertypes are dropped. The whitelisting for a given interface and direction takes effect only when a policy ACL is also applied. This operates on the same classifier node as the one used for dispatching the policy ACL, thus, if one wishes for most of the reasonable IPv4 deployments to continue to operate within the whitelist mode, they must permit ARP ethertype (0x0806) The empty list for a given direction resets the processing to allow the unknown ethertypes. So, if one wants to just permit the IPv4 and IPv6 and nothing else, one can add their ethertypes to the whitelist. Add the "show acl-plugin interface" corresponding outputs about the whitelists, vat command, and unittests. Change-Id: I4659978c801f36d554b6615e56e424b77876662c Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-02-07VXLAN: Allow user to specify a custom vxlan tunnel instance id.Jon Loeliger1-2/+5
If one is not selected by the user, the next available id will be allocated, thus maintaining backward compatibility. Change-Id: I4691ed0638b8072f9cfa9f20b9fe4f981e708800 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2018-02-07classifier-based ACL: refactor + add output ACLAndrew Yourtchenko1-0/+23
For implementation of MACIP ACLs enhancement (VPP-1088), an outbound classifier-based ACL would be needed. There was an existing incomplete code for outbound ACLs, it looked almost exact copy of input ACLs, minus the various enhancements, trying to sync that code seemed error-prone and cumbersome to maintain in the longer run. This change refactors the input+output ACLs processing into a unified routine (thus any changes will have effect on both), and also adds the API to set the output interface ACL, with the same format and semantics as the existing input one (except working on output ACL of course). WARNING: IP outbound ACL in L3 mode clobbers the ip.* fields in the vnet_buffer_opaque_t, since the code is using l2_classify.* The net_buffer (p0)->ip.save_rewrite_length is rescued into l2_classify.pad.l2_len, and used to rewind the header in case of drop, so that ipX_drop prints something sensible. Change-Id: I62f814f1e3650e504474a3a5359edb8a0a8836ed Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-02-06BIER: fix support for longer bit-string lengthsNeale Ranns1-1/+2
Change-Id: I2421197b76be58099e5f8ed5554410adff202109 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-02-01IPv4/6 reassemblyKlement Sekera1-0/+23
Change-Id: Ic5dcadd13c88b8a5e7896dab82404509c081614a Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-01-31NAT66 1:1 mapping (VPP-1108)Matus Fabian1-0/+48
Support the 1:1 translation of source address for IPv6 Change-Id: I934d18e5ec508bf7422d796ee5f172b79c048011 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-01-25NAT44: add opaque string tag to static mapping APIs (VPP-1147)Matus Fabian1-1/+10
Change-Id: I620e2081285ca8ac5c2da8efc12fe6f540ea4fd1 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-01-23For DHCP client configuration control the setting of the broadcast flag in theNeale Ranns1-0/+2
DISCOVER message sent. According to RFC2131: In the case of a client using DHCP for initial configuration (before the client's TCP/IP software has been completely configured), DHCP requires creative use of the client's TCP/IP software and liberal interpretation of RFC 1122. The TCP/IP software SHOULD accept and forward to the IP layer any IP packets delivered to the client's hardware address before the IP address is configured; DHCP servers and BOOTP relay agents may not be able to deliver DHCP messages to clients that cannot accept hardware unicast datagrams before the TCP/IP software is configured. To work around some clients that cannot accept IP unicast datagrams before the TCP/IP software is configured as discussed in the previous paragraph, DHCP uses the 'flags' field [21]. The leftmost bit is defined as the BROADCAST (B) flag. The semantics of this flag are discussed in section 4.1 of this document. The remaining bits of the flags field are reserved for future use. They MUST be set to zero by clients and ignored by servers and relay agents. Figure 2 gives the format of the 'flags' field. this changes means VPP conforms to the: "SHOULD accept and forward to the IP layer any IP packets delivered to the client's hardware address before the IP address is configured" with the caveat that VPP allows DHCP packets destined to the stanard client DHCP port to be delivered. With this enhancement the control-plane is now able to choose the setting of the broadcast flag. Change-Id: Ia4eb2c9bb1e30c29f9192facc645e9533641955a Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-01-22NAT44: asymmetrical static mapping rule (VPP-1135)Matus Fabian1-1/+4
add option to NAT44 static mapping API/CLI to make rule asymmetrical (rule match only out2in direction) Change-Id: If262a3ff375a24d3059f0de1f1ac387a4fe09475 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-01-11NAT44: asymmetrical load balancing static mapping rule (VPP-1132)Matus Fabian1-0/+2
Add option to NAT44 load balancing static mapping API/CLI to make rule asymmetrical (rule match only in out2in direction). Change-Id: I325ecef5591e4bf44ce4469a24d44fe56c3bb2e9 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-01-11Add basic support for DS-Lite CE (VPP-1059)Juraj Sloboda1-0/+11
Change-Id: Ifcca60da3f77c0a4959f98b3365c846badbdc2d0 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-01-09DVR: run L3 output featuresNeale Ranns1-3/+3
- rename l2_bridged to is_dvr. Including on the ip.api this was new in the 18.01 release so no compatability issues. - steal the free space in vnet_buffer_opaque_t for use with flags. - run the ipX-output feature arc from the DVR DPO Change-Id: I040e5976d1dbe076fcdda3a40a7804f56337ce3f Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-01-05Add support for 464XLAT NAT44 mode (VPP-1045)Juraj Sloboda1-0/+2
Change-Id: I24e7a26972bbbfcea100292b212b29ae7a349335 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2017-12-22tcp: add builtin server/client transfer testFlorin Coras1-0/+15
Change-Id: Iab0baabf2f27bc7ad7fbf2d2789a493752b07d8a Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-12-20L2 EmulationNeale Ranns1-0/+12
L2 Emulation is a feautre that is applied to L2 ports to 'extract' IP packets from the L2 path and inject them into the L3 path (i.e. into the appropriate ip[4|6]_input node). L3 routes in the table_id for that interface should then be configured as DVR routes, therefore the forwarded packet has the L2 header preserved and togehter the L3 routed system behaves like an L2 bridge. Change-Id: I8effd7e2f4c67ee277b73c7bc79aa3e5a3e34d03 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-12-20Translate matching packets using NAT (VPP-1069)Juraj Sloboda1-0/+11
Add API function which enables forwarding of packets not matching existing translation or static mapping instead of dropping them. When forwarding is enabled matching packets will be translated while non-matching packets will be forwarded without translation. Change-Id: Ic13040cbad16d3a1ecdc3e02a497171bef6aa413 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2017-12-19NAT: Twice NAT44 (VPP-969)Matus Fabian1-4/+18
Translation of both source and destination addresses and ports for 1:1 NAT session initiated from outside network (ExternalIP K8 use case). Change-Id: Ic0000497cf71619aac996d6d580844f0ea0edc14 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-12-15ESP_AH_test_automation_scripts rev1“mystarrocks”1-0/+162
Change-Id: I941abdc4a02e4c52c66b9d299e380b27caca7c1d Signed-off-by: “mystarrocks” <mystarrocks@yahoo.com>
2017-12-12tcp/session: add make testsFlorin Coras1-0/+5
Change-Id: Icb93ab80c5a6432d7b2b698a47e8b612c6f06fbd Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-12-09BIER in non-MPLS netowrksNeale Ranns1-10/+14
as decsribed in section 2.2 ihttps://tools.ietf.org/html/draft-ietf-bier-mpls-encapsulation-10 with BIFT encoding from: https://tools.ietf.org/html/draft-wijnandsxu-bier-non-mpls-bift-encoding-00 changes: 1 - introduce the new BIFT lookup table. BIER tables that have an associated MPLS label are added to the MPLS-FIB. Those that don't are added to the BIER table 2 - BIER routes that have no associated output MPLS label will add a BIFT label. 3 - The BIER FMask has a path-list as a member to resolve via any possible path. Change-Id: I1fd4d9dbd074f0e855c16e9329b81460ebe1efce Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-30NAT44: identity NAT (VPP-1073)Matus Fabian1-0/+35
Identity mapping translate an IP address to itself. Change-Id: Icc0ca5102d32547a4b0c75720b5f5bf41ed69c71 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-11-16Add Support of DHCP VSS Type 0 where VPN-ID is ASCIIJohn Lo1-5/+9
Enhence support of DHCP VSS (Virtual Subnet Selection) to include VSS type 0 where VSS info is a NVT (Network Virtual Terminal) ASCII VPN ID where the ASCII string MUST NOT be terminated with a zero byte. Existing code already support VSS type 1, where VSS information is a RFC 2685 VPN-ID of 7 bytes with 3 bytes OUI and 4 bytes VPN index, and VSS type 255 indicating global VPN. Change-Id: I54edbc447c89a2aacd1cc9fc72bd5ba386037608 Signed-off-by: John Lo <loj@cisco.com>
2017-11-10add classify session action set-sr-policy-indexGabriel Ganne1-0/+10
This allows to use the classifier to steer source routing packets instead of using the "sr steer" command. This way we can steer on anything instead of only the dst ip address. test: * add add_node_next function to the VppPapiProvider class. * add simple test scenario using the classifier to steer packets with dest ip addr == a7::/8 to the source routing insert node. * use new interface indexes (3,4) instead of (0,1) to prevent a cleanup conflict with the other tests which attach a specific fib to the interface. The test creates interfaces sepsrated from the other tests to prevent a conflict in the cleaning of the ip6 fib index 1 which causes vpp not to be able to find a default route on this table. Change-Id: Ibacb30fab3ce53f0dfe848ca6a8cdf0d111d8336 Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
2017-11-09BIERNeale Ranns1-0/+119
- see draft-ietf-bier-mpls-encapsulation-10 - midpoint, head and tail functions - supported payload protocols; IPv4 and IPv6 only. Change-Id: I59d7363bb6fdfdce8e4016a68a9c8f5a5e5791cb Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-08ACL plugin support tagged subinterfacesPavel Kotucek1-0/+17
Change-Id: I92b351895c7efb26533c05512b91ead8ddbfb9c8 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-11-08NAT64 to use IPv4 address from interface (VPP-1051)Matus Fabian1-0/+12
Change-Id: I326429c31dea6958a342ee152ef86cb975f4b12c Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-11-07SNAT: IP fragmentation (VPP-890)Matus Fabian1-0/+37
Translation of fragmented packets. Change-Id: I9b1f2e9433ce273638080f32c2d3bff39c49899d Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-11-07UDP Encapsulation.Neale Ranns1-0/+39
A UDP-encap object that particiapates in the FIB graph and contributes DPO to teh output chain. It thereofre resembles a tunnel but without the interface. FIB paths (and henace routes) can then be created to egress through the UDP-encap. Said routes can have MPLS labels, hence this also allows MPLSoUPD. Encap is uni-directional. For decap, one still registers with the UDP port dispatcher. Change-Id: I23bd345523b20789a1de1b02022ea1148ca50797 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-07NAT: DS-Lite (VPP-1040)Matus Fabian1-0/+28
Dual-Stack Lite enables a broadband service provider to share IPv4 addresses among customers by combining two well-known technologies: IPv4-in-IPv6 and NAT. Change-Id: I039740f8548c623cd1ac89b8ecda1a6cc4aafb9c Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-10-31l2fib: MAC: Fix uint64 to u8 byte arrayMohsin Kazmi1-1/+1
As per proposal on the mailing list, this patch fixes the represntation of MAC address in VPP API calls for · L2fib_add_del · L2_fib_table_details Change-Id: I31e17efd1a6314cded69666e693cb8fc33158d02 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2017-10-26NAT: delete session API/CLI (VPP-1041)Matus Fabian1-0/+23
Administratively delete NAT44 session for specific inside/outside addresses and port pair. Change-Id: If5ab500ac3592c7153d6d8f2cc0297df7309fbc3 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-10-25VPP-1033: Python API support arbitrary sized input parameters.Ole Troan1-2/+2
Dynamically calculate the required buffer size to pack into based on message definition. Also add input parameter length checking. Change-Id: I7633bec596e4833bb328fbf63a65b866c7985de5 Signed-off-by: Ole Troan <ot@cisco.com>
2017-10-19Remove unused 'not_last' parameter from ip_add_del_routeMarek Gradzki1-7/+2
Vat supports setting value for the parameter, but 'not_last' is ignored by ip_add_del_route handler, so can be removed. This patch - updates ip.api, - removes vat handlers - updates vpp_papi_provider.py (also mpls_route_add_del with unused not_last) Change-Id: Ife15de123db4bc8247103a29b90bce1988e46534 Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
2017-10-14Source Lookup progammable via APINeale Ranns1-0/+4
Change-Id: I5d5d4f22b6369d504455a644f73076d772fbcfb4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-10punt and drop features:Neale Ranns1-0/+57
- new IPv4 and IPv6 feature arcs on the punt and drop nodes - new features: - redirect punted traffic to an interface and nexthop - police punted traffic. Change-Id: I53be8bf4e06545add8a3619e462de5ffedd0a95c Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-06Initial GENEVE TUNNEL implementation and tests.Marco Varlese1-0/+32
Notes on this first implementation: * First version of the implementation does NOT support GENEVE OPTIONS HEADER: it isn't well understood what the purpose of the OPTIONS will be and/or what content would be placed in the variable option data; Once the IETF work will evolve and further information will be available it could be possible to modify the frame rewrite to contemplate the actual GENEVE OPTIONS. Change-Id: Iddfe6f408cc45bb0800f00ce6a3e302e48a4ed52 Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2017-10-05Distributed Virtual Router SupportNeale Ranns1-0/+2
A distributed virtual router works by attmpeting to switch a packet, but on failing to find a local consumer (i.e. the packet is destined to a locally attached host) then the packet is sent unmodified 'upstream' to where the rest of the 'distributed' router is present. When L3 switching a packet this means the L2 header must not be modifed. This patch adds a 'l2-bridge' object to the L3 FIB which re-injects packets from the L3 path back into the L2 path - use with extreme caution. Change-Id: I069724eb45956647d7980cbe40a80a788ee6ee82 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-02L2-FIB:add mac learn events testEyal Bari1-0/+9
fixes an issue where events were not sent if BD doesn't enable mac aging Change-Id: Iddc53cb5c45e560633e6c5cff2731dccfc70ad5b Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-09-27acl-plugin: take 2 at VPP-991 fix, this time with a test case which verifies it.Andrew Yourtchenko1-0/+10
The replacement of [] with pool_elt_at_index and subsequent fixing it was incorrect - it was equivalent to &[], since it returns a pointer to the element. I've added VPP-993 previously to create a testcase, so this commit partially fulfills that one as well. Change-Id: I5b15e3ce48316f0429232aacf885e8f7c63d9522 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-09-26acl-plugin: test: move the API calls to vpp_papi_provider.pyAndrew Yourtchenko1-0/+29
Change-Id: I1d3818027b8a1fcb1ec12016e3476b5c22a2d5a5 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-09-22IP-MAC,ND:wildcard events,fix sending multiple eventsEyal Bari1-0/+6
wildcard ND events publisher was sending the last event mutiple times Change-Id: I6c30f2de03fa825e79df9005a3cfaaf68ff7ea2f Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-09-18L2BD,ARP-TERM:fix arp query report mechanism+testEyal Bari1-3/+9
previous mechanism was emitting duplicates of last event, when handling multiple arp queries. tests: * arp events sent for graps * duplicate suppression * verify no events when disabled Change-Id: I84adc23980d43b819261eccf02ec056b5cec61df Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-09-12ACL-plugin add "replace" semantics for adding a new MacIP aclPavel Kotucek1-6/+14
Change-Id: Ia5c869b2d8b8ad012b9e89fb6720c9c32d9ee065 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-09-11FIB table add/delete APINeale Ranns1-12/+34
part 2; - this adds the code to create an IP and MPLS table via the API. - but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass. Change-Id: Id124d884ade6cb7da947225200e3bb193454c555 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-09-08ACL-plugin MACIP ACLs testsPavel Kotucek1-0/+55
Change-Id: Ie40c837358454cfe9475cb2c14fdf20b24fa6602 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>