Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: test
Change-Id: Ib32c87b7f07c0552a6801a895332a0156c3c37f0
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Change-Id: I01772cfc3a0118a5c49bf346339788824e6931b2
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
A number of VppGbpContractRules were missing the hash_mode_t
and were being replaced by an optional kwarg.
Type: fix
Change-Id: I6ca03c93b69e4355c237a6c9402e1e178b701b21
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
please consult the new tunnel proposal at:
https://wiki.fd.io/view/VPP/IPSec
Type: feature
Change-Id: I52857fc92ae068b85f59be08bdbea1bd5932e291
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Enhance the route add/del APIs to take a set of paths rather than just one.
Most unicast routing protocols calcualte all the available paths in one
run of the algorithm so updating all the paths at once is beneficial for the client.
two knobs control the behaviour:
is_multipath - if set the the set of paths passed will be added to those
that already exist, otherwise the set will replace them.
is_add - add or remove the set
is_add=0, is_multipath=1 and an empty set, results in deleting the route.
It is also considerably faster to add multiple paths at once, than one at a time:
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11
100000 routes in .572240 secs, 174751.80 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12
100000 routes in .528383 secs, 189256.54 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13
100000 routes in .757131 secs, 132077.52 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14
100000 routes in .878317 secs, 113854.12 routes/sec
vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14
100000 routes in .900212 secs, 111084.93 routes/sec
Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
encapped SPI-0 packets
Type: fix
Fixes: b71fa75d48
Change-Id: I2d81b373f7659e702759939c096b315afa36f621
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- add to the Punt API to allow different descriptions of the desired packets: UDP or exceptions
- move the punt nodes into punt_node.c
- improve tests (test that the correct packets are punted to the registered socket)
Change-Id: I1a133dec88106874993cba1f5a439cd26b2fef72
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ida6a8f96bd858246e993250087bed45e7084ede1
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Use the enums provided from the api definitions instead.
Change-Id: I43b7591df920c984e439efc4b3ec3c4121c539d8
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
* Configure tests to raise exception if cli_inband fails.
* Fix failing tests.
* Add filename detail to pcap.stat clib_error_return for debugging.
Note: this change identifies spurious issues with packet-generator such as:
CliFailedCommandError: packet-generator capture: pcap file
'/tmp/vpp-unittest-Test6RD-v09RPA/pg0_out.pcap' does not exist.
These issues resolve themselves on remaining test passes.
Change-Id: Iecbd09daee954d892306d11baff3864a43c5b603
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I9e3af8674e8aae27079fd03f6286f165d777814f
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: If936b198bcac7a317d52f958561c3e19d158450a
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I0eb85252d4b489ba25dcf59252e2bcf3b0cd5c6a
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Add missing create_bvi/delete_bvi to defaultmapping.
Correct typo in interface.api documentation.
Change-Id: I8aa187f3b33c21fb2fcd55311ef79777c81d94d4
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I2492400a67b39a3adbc24ab7cf1ba17a409e95a8
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Handle the case where buffer overflows.
Then SOCK_SEQPACKET assumption that multiple API messages
are not returned by recv() is broken. Use SOCK_STREAM for
API exchanges instead.
Add support for running tests over sockets.
make test SOCKET=1
Change-Id: Ibe5fd69b1bf617de4c7ba6cce0a7c2b3f97a2821
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
This reverts commit bed1421b9f1b3643d93384084972337b596aec73.
/vpp/master3/src/plugins/nat/nat_api.c: In function ‘send_nat_worker_details’:
/vpp/master3/src/vppinfra/clib.h:62:33: error: division ‘sizeof (u8 * {aka unsigned char *}) / sizeof (u8 {aka unsigned char})’ does not compute the number of array elements [-Werror=sizeof-pointer-div]
#define ARRAY_LEN(x) (sizeof (x)/sizeof (x[0]))
^
/vpp/master3/src/plugins/nat/nat_api.c:205:43: note: in expansion of macro ‘ARRAY_LEN’
rmp = vl_msg_api_alloc (sizeof (*rmp) + ARRAY_LEN (w->name) - 1);
^~~~~~~~~
Change-Id: Ie82672c145fb2f6580827f95e535435307bc7a23
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I519d7efc8ee3c86381d96be2e2a46017cd948895
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Change-Id: I5010cd34123c6498230dedac6ba8dd774a1085f9
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I02c857da4cf6da5e0e55c1e48b63716af7ade0a9
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: Ia8cea13f7b937294e6a080a55fb2ceff30063acf
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
failing test disabled on ARM
Change-Id: I6b7535cd8f51fdaf9786ba77f9f61a7d8d049bbd
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
test/vpp_l2.py:213:26: F821 undefined name 'L2_VTR_OP'
self.itf.set_vtr(L2_VTR_OP.L2_DISABLED)
Move L2_VTR_OP enum to vpp_sub_interface.py where the VTR code is found.
Change-Id: I9eb9a3a2c679813c221ce1d0c4fa8aac6076c443
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I53ab8d17914e6563110354e4052109ac02bf8f3b
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I4d73b712da911588d511a8401b73cdc3c66346fe
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I96a1d4b2b3ae22cf164c0acd6db9b323cd70f51a
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I6a76907dc7bed2a81282b63669bea2219d6903c9
Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
This reverts commit e2e8f02165f27ae04e6d20ce0c628e29271a8db6.
Change-Id: Ie23dcb8a5b3e96f77e0d117a6887c43064c79669
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Iaf106962598d04708e8740e016d5c55ff35432c9
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Since the stated policy regarding CLI commands is:
"Note that the debug CLI is a developer's tool
- no warranty express or implied - and that
we may choose not to fix debug CLI bugs.",
this change emits a deprecation warning whenever a test case calls a CLI command.
Change-Id: I91b30e86ae1b2fca36732837f36cdda762cdf458
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Split this work up into pieces.
Please don't add new wrappers to vpp_papi_provider.py.
Change-Id: I0f8f2afc4cd2bba07ea70ddecea2d7319f7b2e10
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Fix struct.error: expected bytes object got <class 'str'>
Change-Id: I837ae6e97e44c789a9372677151b157956525334
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Reduce the incidence of:
20:04:23,606 unexpected time.sleep() result - slept for 2.187967e-03s instead of ~6.837845e-04s!
Change-Id: Ic576fda7f75e571c9019111588a6a936ee2cf5c2
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Part of further cleanups of this file.
Removed most wrappers that don't have conflicting signature with
message API.
Change-Id: I6acd93d20291feb7731eb35ab2eb8c9f22f4632c
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I154e18f22ec7708127b8ade98e80546ab1dcd05b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I8af7bca566ec7c9bd2b72529d49e04c6e649b44a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Replace custom __getattr__ with custom __getattribute__.
Change-Id: Ib96176abc07eefedba305ed874621001a810eb0d
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I3ed4e2e92f74f15b07fcd3e7fbc3fa8718d5249d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
In preparation to remove the wrappers in vpp_papi_provider.py, ensure
names used in tests match the actual API message names.
Change-Id: I230ca4eb75aa727ff68d702e085a2edbbc6b6d19
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
This is the first step to be able to remove all the API message
wrappers in vpp_papi_provider.py. This allows to remove all
functions that do not override parameters (different from zero),
and a separate dictionary for messages requiring different defaults.
The general requirement is that all new tests should use named
arguments directly. Not positional arguments through the wrapper.
Note when removing functions, the calls in vpp_papi_provider
wrappers do not necessarily follow message order.
Change-Id: If64916c07f8622c138db3a9d7c4a98b93a058e68
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
session synchronization so that we can build a plain active-passive HA NAT pair
Change-Id: I21db200491081ca46b7af3e82afc677c1985abf4
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Subclasses cannot modify the signature of their constructors.
def __init__(self, test):
- super(PollHook, self).__init__(test.logger)
+ super(PollHook, self).__init__(test)
Change-Id: I764df8871128f9198a03fac4ec2f45528547467a
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
- use enums to enumerate the algoritms and protocols that are supported
- use address_t types to simplify encode/deocde
- use typedefs of entry objects to get consistency between add/del API and dump
Change-Id: I7e7c58c06a150e2439633ba9dca58bc1049677ee
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
use address_t and mac_address_t for IPv6 and ARP entries
and all other API calls in ip.api aprat from the route ones,
that will follow in a separate commit
Change-Id: I67161737c2184d3f8fc1e79ebd2b55121c5b0191
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
this means we test the dumps - to some extent
Change-Id: I8d90745701012012b41a7b3aaf9be97b4dd2bdf8
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ica88268fd6a6ee01da7e9219bb4e81f22ed2fd4b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Remove unnecessary envvar magic for sphinx builds.
Just provide the proper mock objects.
Change-Id: I151513eb47d2f71cf221651145dbcdc153448772
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
The detection login in vpp_papi is significantly more advanced than
the implementation in vpp_papi_provider.
Let's take full advantage of it and ensure consistent behavior.
Change-Id: I786e6d5f4588a0d74e863cce1b0bc1a93fa0e614
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I78fe58144fa3ba2e1c7135897a13a2541f235c91
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Change-Id: I8993132bdd0931c96ba8bc879ec3b4ae938a46c5
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|