summaryrefslogtreecommitdiffstats
path: root/test/vpp_papi_provider.py
AgeCommit message (Collapse)AuthorFilesLines
2020-01-30gre: Tunnel encap/decap flagsNeale Ranns1-37/+0
Type: feature common funcitons across IP-in-IP and GRE tunnels for encap/decap functions Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I325b66824878d843af167adfe5a7a96b0ab90566
2019-12-17ip: Protocol Independent IP NeighborsNeale Ranns1-21/+1
Type: feature - ip-neighbour: generic neighbour handling; APIs, DBs, event handling, aging - arp: ARP protocol implementation - ip6-nd; IPv6 neighbor discovery implementation; separate ND, MLD, RA - ip6-link; manage link-local addresses - l2-arp-term; events separated from IP neighbours, since they are not the same. vnet retains just enough education to perform ND/ARP packet construction. arp and ip6-nd to be moved to plugins soon. Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-12-09gtpu: use explicit types in apiOle Troan1-34/+0
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I16fcbd5e63526dbf062a3032701479324fe2a4f5
2019-12-07pppoe: use explicit types in apiOle Troan1-2/+0
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Ifd1e1907740e55420dc040eb2afbbbf9887aea3c
2019-12-04gre: Multi-point interfacesNeale Ranns1-4/+6
Type: feature Change-Id: I0129ad6ace44a50a8a3b26db8e445cd06b2b49e8 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-12-03classify: API cleanupJakub Grajciar1-82/+0
Use consistent API types. Type: fix Change-Id: Ib5b1efa76f0a9cecc0bc146f8f8a47c2442fc1db Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-11-26fib: Table ReplaceNeale Ranns1-25/+0
Type: feature from the API doc, a table replace is: " The use-case is that, for some unspecified reason, the control plane has a very different set of entries it wants in the table than VPP currently has. The CP would thus like to 'replace' VPP's current table only by specifying what the new set of entries shall be, i.e. it is not going to delete anything that already eixts. the CP delcartes the start of this procedure with this begin_replace API Call, and when it has populated all the entries it wants, it calls the below end_replace API. From this point on it is of coursce free to add and delete entries as usual. The underlying mechanism by which VPP implements this replace is purposefully left unspecified. " In the FIB, the algorithm is implemented using mark and sweep. Algorithm goes: 1) replace_begin: this marks all the entries in that table as 'stale' 2) download all the entries that should be in this table - this clears the stale flag on those entries 3) signal the table converged: ip_table_replace_end - this removes all entries that are still stale this procedure can be used when an agent first connects to VPP, as an alternative to dump and diff state reconciliation. Change-Id: I168edec10cf7670866076b129ebfe6149ea8222e Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-11-15tests: Remove the unrequired VPP IP address/prefix class wrappersNeale Ranns1-6/+3
Type: refactor Change-Id: I204f3f8eebc5f5d5a377e91262f91c615fd00168 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-11-08ipsec: remove dedicated IPSec tunnelsNeale Ranns1-1/+1
APIs for dedicated IPSec tunnels will remain in this release and are used to programme the IPIP tunnel protect. APIs will be removed in a future release. see: https://wiki.fd.io/view/VPP/IPSec Type: feature Change-Id: I0f01f597946fdd15dfa5cae3643104d5a9c83089 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-10-17classify: make tests support python3Ole Troan1-5/+4
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I7c4a12165fa0928fb2b8d99fc1c8d5de16377e7e
2019-10-16tests: cli wrapper should return stringOle Troan1-2/+1
Python3 fixes. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I648b2142d45dfab9146a02eeb1b12de11103ff9f Signed-off-by: Ole Troan <ot@cisco.com>
2019-10-14gso: Add gso feature arcMohsin Kazmi1-0/+7
Type: refactor Change-Id: Ib4a8e7e64093b2db1deda6663325080bc8337605 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-10-10tests: add cli_return_response to vpp_papi_providerDave Barach1-2/+13
To improve gcov/lcov code coverage stats, it's necessary to send incorrect debug CLI commands; to force vpp into debug CLI error paths. cli_return_response() sends commands and returns the response object, so test vectors can handle failures. Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I4fab591c9d2e30c996f016e18e4fd69b9c5bed06
2019-10-09dhcp: dhcp6_pd_client_cp API cleanupJakub Grajciar1-10/+0
Use consistent API types. Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: If6c102a53d074cba7eca6b6af9855aa4486f38cc
2019-10-08tests: handle unicode charactes in cli outputKlement Sekera1-1/+2
Type: fix Change-Id: Ic4fb53e6d10a1de155a3088be81d53d9efeb0c0f Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-10-07dhcp: Move to pluginNeale Ranns1-12/+0
Type: feature Change-Id: I3fe27a8ef577741d9a5c4f090ec91cf68fb44fe3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-10-03dhcp: API cleanupJakub Grajciar1-96/+4
Use consistent API types. Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: Ia63d920788add2584060a240321acced7a471640
2019-09-30dhcp: dhcp6_ia_na_client_cp API cleanupJakub Grajciar1-6/+0
Use consistent API types. Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: Ie2d2c74ed3832d137e808e0b52348b4e660feb6f Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-09-11bonding: API cleanupJakub Grajciar1-0/+1
Use consistent API types. Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: Idbba4ab6a412b75338e3149e51476693f0862f16 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-09-04bfd: API cleanupJakub Grajciar1-81/+5
Use consistent API types. Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: I4b91ebe8aadbec8b95716ed1cde4b0a13eee3a3f Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-07-26dhcp ip: DSCP settings for transmitted DHCP packetsNeale Ranns1-1/+3
Type: feature - Define the ip_dscp_t and use in the IP headers - Add DSCP setting to the DHCP client for use with packet TX Change-Id: If220dde0017ea78793747d65f53e11daf23a28fa Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-24qos: QoS dump APIsNeale Ranns1-22/+0
Type: feature Change-Id: I514b40026986f3828c8727453456b20a0a45f3af Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-19bonding: add support for numa-only in lacp modeZhiyong Yang1-0/+3
If numa-only is set, Only slaves on local numa node transmit pkts if have at least one, otherwise the bond interface works as usual. CLI change: create bond mode lacp [load-balance { l2 | l23 | l34 } {numa-only}] [hw-addr <mac-address>] [id <if-id>] The new member "u8 numa_only;" is also added to bond_create_if_args_t. Type: feature Change-Id: Icdccedafb0738d8c9d4a5acce909ce562428c071 Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-07-12tests: remove invalid arguments passed to papiPaul Vinciguerra1-5/+1
This changeset removes keys that are invalid in papi kwargs. Type: test Change-Id: I6568f91cd240dc1927540396210b429f6ce82c0a Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-07-05gbp: add unit-tests for anonymous l3outBenoît Ganne1-2/+3
Type: test Change-Id: Ib32c87b7f07c0552a6801a895332a0156c3c37f0 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-07-01gbp: VRF scoped contractsNeale Ranns1-2/+5
Type: feature Change-Id: I01772cfc3a0118a5c49bf346339788824e6931b2 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-25tests: fix test_gbp.py.Paul Vinciguerra1-52/+1
A number of VppGbpContractRules were missing the hash_mode_t and were being replaced by an optional kwarg. Type: fix Change-Id: I6ca03c93b69e4355c237a6c9402e1e178b701b21 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-18ipsec: ipsec-tun protectNeale Ranns1-13/+0
please consult the new tunnel proposal at: https://wiki.fd.io/view/VPP/IPSec Type: feature Change-Id: I52857fc92ae068b85f59be08bdbea1bd5932e291 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-18fib: fib api updatesNeale Ranns1-105/+132
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-14ipsec: Correctly rewind the buffer to the IP header when punting UDP ↵Neale Ranns1-1/+3
encapped SPI-0 packets Type: fix Fixes: b71fa75d48 Change-Id: I2d81b373f7659e702759939c096b315afa36f621 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-05-28Punt: socket register for exception dispatched/punted packets based on reasonNeale Ranns1-18/+5
- add to the Punt API to allow different descriptions of the desired packets: UDP or exceptions - move the punt nodes into punt_node.c - improve tests (test that the correct packets are punted to the registered socket) Change-Id: I1a133dec88106874993cba1f5a439cd26b2fef72 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-05-27IPIP tunnel: use address types on APINeale Ranns1-1/+0
Change-Id: Ida6a8f96bd858246e993250087bed45e7084ede1 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-05-17Tests: Refactor. Remove copies of enums.Paul Vinciguerra1-18/+0
Use the enums provided from the api definitions instead. Change-Id: I43b7591df920c984e439efc4b3ec3c4121c539d8 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-05-17Tests: Raise exception if API cli_inband command fails.Paul Vinciguerra1-0/+12
* Configure tests to raise exception if cli_inband fails. * Fix failing tests. * Add filename detail to pcap.stat clib_error_return for debugging. Note: this change identifies spurious issues with packet-generator such as: CliFailedCommandError: packet-generator capture: pcap file '/tmp/vpp-unittest-Test6RD-v09RPA/pg0_out.pcap' does not exist. These issues resolve themselves on remaining test passes. Change-Id: Iecbd09daee954d892306d11baff3864a43c5b603 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-05-15vpp_papi: remove dependency on environment var. VPP_API_DIR.Paul Vinciguerra1-10/+9
Change-Id: I9e3af8674e8aae27079fd03f6286f165d777814f Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-05-10tests: test/vpp_papi_provider.py Specify exception to catch.Paul Vinciguerra1-1/+1
Change-Id: If936b198bcac7a317d52f958561c3e19d158450a Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-05-02NAT: VPP-1661 - test case cleanup and refactoringFilip Varga1-459/+0
Change-Id: I0eb85252d4b489ba25dcf59252e2bcf3b0cd5c6a Signed-off-by: Filip Varga <fivarga@cisco.com>
2019-05-02vpp_papi_provider.py: update defautmapping.Paul Vinciguerra1-0/+2
Add missing create_bvi/delete_bvi to defaultmapping. Correct typo in interface.api documentation. Change-Id: I8aa187f3b33c21fb2fcd55311ef79777c81d94d4 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-04-24NAT: VPP-1531 api cleanup & updateFilip Varga1-183/+56
Change-Id: I2492400a67b39a3adbc24ab7cf1ba17a409e95a8 Signed-off-by: Filip Varga <fivarga@cisco.com>
2019-04-23API: Python and Unix domain socket improvementOle Troan1-1/+9
Handle the case where buffer overflows. Then SOCK_SEQPACKET assumption that multiple API messages are not returned by recv() is broken. Use SOCK_STREAM for API exchanges instead. Add support for running tests over sockets. make test SOCKET=1 Change-Id: Ibe5fd69b1bf617de4c7ba6cce0a7c2b3f97a2821 Signed-off-by: Ole Troan <ot@cisco.com>
2019-04-23Revert "NAT: VPP-1531 api cleanup & update"Ole Trøan1-56/+183
This reverts commit bed1421b9f1b3643d93384084972337b596aec73. /vpp/master3/src/plugins/nat/nat_api.c: In function ‘send_nat_worker_details’: /vpp/master3/src/vppinfra/clib.h:62:33: error: division ‘sizeof (u8 * {aka unsigned char *}) / sizeof (u8 {aka unsigned char})’ does not compute the number of array elements [-Werror=sizeof-pointer-div] #define ARRAY_LEN(x) (sizeof (x)/sizeof (x[0])) ^ /vpp/master3/src/plugins/nat/nat_api.c:205:43: note: in expansion of macro ‘ARRAY_LEN’ rmp = vl_msg_api_alloc (sizeof (*rmp) + ARRAY_LEN (w->name) - 1); ^~~~~~~~~ Change-Id: Ie82672c145fb2f6580827f95e535435307bc7a23 Signed-off-by: Ole Troan <ot@cisco.com>
2019-04-23NAT: VPP-1531 api cleanup & updateFilip Varga1-183/+56
Change-Id: I519d7efc8ee3c86381d96be2e2a46017cd948895 Signed-off-by: Filip Varga <fivarga@cisco.com>
2019-04-18GRE: API updateNeale Ranns1-14/+15
Change-Id: I5010cd34123c6498230dedac6ba8dd774a1085f9 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-17api: Add to interface crud - read by sw_if_index.Paul Vinciguerra1-0/+1
Change-Id: I02c857da4cf6da5e0e55c1e48b63716af7ade0a9 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-04-17IPSEC: Pass the algorithm salt (used in GCM) over the APINeale Ranns1-2/+5
Change-Id: Ia8cea13f7b937294e6a080a55fb2ceff30063acf Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-02IPSEC-GRE; testsNeale Ranns1-0/+13
failing test disabled on ARM Change-Id: I6b7535cd8f51fdaf9786ba77f9f61a7d8d049bbd Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-29tests: test/vpp_l2.py fix missing name.Paul Vinciguerra1-13/+0
test/vpp_l2.py:213:26: F821 undefined name 'L2_VTR_OP' self.itf.set_vtr(L2_VTR_OP.L2_DISABLED) Move L2_VTR_OP enum to vpp_sub_interface.py where the VTR code is found. Change-Id: I9eb9a3a2c679813c221ce1d0c4fa8aac6076c443 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-28Typos. A bunch of typos I've been collecting.Paul Vinciguerra1-7/+7
Change-Id: I53ab8d17914e6563110354e4052109ac02bf8f3b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-27GBP: fixes for l3-out routingNeale Ranns1-1/+3
Change-Id: I4d73b712da911588d511a8401b73cdc3c66346fe Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-22tests: update test_lb.py to use api call lb_conf.Paul Vinciguerra1-0/+2
Change-Id: I96a1d4b2b3ae22cf164c0acd6db9b323cd70f51a Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>