aboutsummaryrefslogtreecommitdiffstats
path: root/test
AgeCommit message (Collapse)AuthorFilesLines
2022-09-30fib: fix dpo-receive address in ip6-ll fibsVladislav Grishenko1-1/+3
Need to fill frp_addr for local path, it's used by dpo-receive. If not, address output can be invalid: $ sudo vppctl sh ip6-ll fe80::dcad:ff:fe00:3/128 IP6-link-local:loop3, fib_index:2, locks:[IPv6-nd:1, ] fe80::dcad:ff:fe00:3/128 fib:2 index:55 locks:2 IPv6-nd refs:1 entry-flags:connected,import,local, src-flags:added,contributing,active, path-list:[72] locks:2 flags:shared,local, uPRF-list:58 len:0 itfs:[] path:[82] pl-index:72 ip6 weight=1 pref=0 receive: oper-flags:resolved, cfg-flags:local,glean, [@0]: dpo-receive: 8000:100:fe80::dcad:ff on loop3 forwarding: unicast-ip6-chain [@0]: dpo-load-balance: [proto:ip6 index:57 buckets:1 uRPF:58 to:[0:0]] [0] [@2]: dpo-receive: 8000:100:fe80::dcad:ff on loop3 Type: fix Change-Id: Ib9874c5eac74af789e721098d512a1058cb8e404 Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
2022-09-30udp: add udp encap source port entropy supportVladislav Grishenko1-4/+199
Encode entropy value in UDP source port when requested per RFC 7510. CLI already has "src-port-is-entropy", use zero UDP source port in API to avoid breaking changes, since zero port is not something to be used in wild. Also, mark UDP encapsualtion API as mp-safe as already done for CLI. Type: feature Change-Id: Ieb61ee11e058179ed566ff1f251a3391eb169d52 Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
2022-09-28tests: stabilize wireguard ratelimiting testAlexander Chernavin1-29/+13
Type: test "test_wg_handshake_ratelimiting_multi_peer" has been unstable recently because the test strongly relies on execution speed. Currently, the test triggers ratelimiting for peer 1 and sends handshake initiations from peer 1 and 2 mixed up. After that, the test expects that all handshake initiations for peer 1 are ratelimited and a handshake response for peer 2 is received. Ratelimiting is based on the token bucket algorithm. The more time passes between triggering ratelimiting for peer 1 and sending a mixture of handshake initiations from peer 1 and 2, the more tokens will be added into the bucket for peer 1. Depending on delays between these steps, the number of tokens might be enough to process handshake initiations from peer 1 while they are expected to be rejected due to ratelimiting. With this change, these two steps are combined into one and the logic modified. The test triggers ratelimiting for both peer 1 and 2. Packets that trigger ratelimiting and that are to be rejected are sent in one batch that is going to reduce delays between packet processing. Also, verify that number of rejected handshake messages is in expected range instead of verifying the exact number as it still may slightly vary. Also, this should finish making the wireguard tests stable on Ubuntu 22.04 and Debian 11. Signed-off-by: Alexander Chernavin <achernavin@netgate.com> Change-Id: I3407d15abe1356dde23a241ac3650e84401c9802
2022-09-27tests: enable ipsec-esp 'make test' testcases on ubuntu-22.04Dave Wallace2-59/+1
Type: test Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I016fd169813e369208089df122477152aaf9ffc2
2022-09-27wireguard: stop sending handshakes when wg intf is downAlexander Chernavin1-1/+133
Type: fix Currently, when a wg interface is administratively disabled initially or during operation, handshake packets continue to be sent. Data packets stop being sent because routes pointing to the wg interface will not be used. But data keys remain. With this fix, when a wg interface is administratively disabled during peer creation, avoid connection initialization to the peer. Data keys and timers should be empty at this point. When a wg interface is disabled during operation, disable all peers (i.e. stop all timers, clear data keys, etc.). Thus, state should be identical in both cases. When a wg interface is administratively enabled, enable all peers (i.e. get ready to exchange data packets and initiate a connection). Also, cover these scenarios with tests. Signed-off-by: Alexander Chernavin <achernavin@netgate.com> Change-Id: Ie9a620077e55d519d21b0abc8c0d3c87b378bca3
2022-09-27wireguard: fix re-handshake timer when response sentAlexander Chernavin1-22/+48
Type: fix As per the protocol: A handshake initiation is retried after "REKEY_TIMEOUT + jitter" ms, if a response has not been received... Currently, if retransmit handshake timer is started, it will trigger after "REKEY_TIMEOUT + jitter" ms and will try to send a handshake initiation via wg_send_handshake() given that no responses have been received. wg_send_handshake() will verify that time stored in REKEY_TIMEOUT has passed since last handshake initiation sending and if has, will send a handshake initiation. Time when a handshake initiation was last sent is stored in last_sent_handshake. The problem is that last_sent_handshake is not only updated in wg_send_handshake() when sending handshake initiations but also in wg_send_handshake_response() when sending handshake responses. When retransmit handshake timer triggers and a handshake response has been sent recently, a handshake initiation will not be sent because for wg_send_handshake() it will look like that time stored in REKEY_TIMEOUT has not passed yet. Also, the timer will not be restarted. wg_send_handshake_response() must not update last_sent_handshake, because this time is used only when sending handshake intitiations. And the protocol does not say that handshake initiation retransmission and handshake response sending (i.e. replying to authenticated handshake initiations) must coordinate. With this fix, stop updating last_sent_handshake in wg_send_handshake_response(). Also, this fixes tests that used to wait for "REKEY_TIMEOUT + 1" seconds and did not receive any handshake initiations. Then they fail. Also, long-running tests that send wrong packets and do not expect anything in reply may now receive handshake intiations, consider them as replies to the wrond packets, and fail. Those are updated to filter out handshake initiations in such verifications. Moreover, after sending wrong packets, error counters are already inspected there to confirm packet processing was unsuccessful. Signed-off-by: Alexander Chernavin <achernavin@netgate.com> Change-Id: I43c428c97ce06cb8a79d239453cb5f6d1ed609d6
2022-09-27tests: disable failing tests on ubuntu-22.04 debian-11Dave Wallace11-8/+116
Type: test Change-Id: I7b2314a731c83b3dcd69c999edb8ebed53839724 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2022-09-23bfd: add tracing support to bfd-processKlement Sekera1-0/+2
Outgoing packets can be now traced via: trace add bfd-process <count> Type: improvement Change-Id: Ia19af6054289b18f55e518dbea251a2bee9b9457 Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
2022-09-21ipsec: introduce fast path ipv6 inbound matchingPiotr Bronowski1-40/+77
This patch introduces fast path matching for inbound traffic ipv6. Fast path uses bihash tables in order to find matching policy. Adding and removing policies in fast path is much faster than in current implementation. It is still new feature and further work needs and can be done in order to improve the perfromance. Type: feature Change-Id: Iaef6638033666ad6eb028ffe0c8a4f4374451753 Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
2022-09-20tests: run tests against a running VPPNaveen Joy4-12/+291
Usage: test/run.py -r -t {test_filter} Instead of starting a new instance of VPP, when the -r argument is provided, test is run against a running VPP instance. Optionally, one can also set the VPP socket directory using the -d argument. The default location for socket files is /var/run/user/${uid}/vpp and /var/run/vpp if VPP is started as root. Type: improvement Change-Id: I05e57a067fcb90fb49973f8159fc17925b741f1a Signed-off-by: Naveen Joy <najoy@cisco.com>
2022-09-19tests: skip tests failing on ubuntu 22.04Dave Wallace4-2/+87
Type: test Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I218059de5d05680d661f302293475b6c2a7bf81d
2022-09-19igmp: validate ip router alert option lengthVladislav Grishenko1-15/+45
It's known there're one or more 32-bit increments in the ip header. So just check ip router alert option length with minimal performance impact, and don't care of the total options length. Type: fix Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru> Signed-off-by: Dmitry Valter <d-valter@yandex-team.ru> Change-Id: I46dd06516f793846b931a1dc8612f2735f8d24d3
2022-09-19arp: update error reason when checking for proxy-arpBenoît Ganne1-1/+5
When we follow arp feature arc for proxy-arp, we should still update the error reason in case proxy-arp cannot handle the arp request and drops it. Type: improvement Change-Id: I046df017ca2056cfc12af0f0a968b401058bcd6d Signed-off-by: Benoît Ganne <bganne@cisco.com>
2022-09-15nat: fix nat44-ed port range with multiple workersVladislav Grishenko1-1/+192
The number of available dynamic ports is set to (0xffff - 1024) = 64511, which is not divisable by the pow2 number of workers - the only integer divisors are 31 and 2081. So, total dynamic port range of all workers will be less than it: 1 wrk: n = (port_per_thread = 64511/1)*1 = 64511 + 1025 = 65536 2 wrk: n = (port_per_thread = 64511/2)*2 = 64510 + 1025 = 65535 4 wrk: n = (port_per_thread = 64511/4)*4 = 64508 + 1025 = 65533 8 wrk: n = (port_per_thread = 64511/8)*8 = 64504 + 1025 = 65529 ... As seen, with multiple workers there are unused trailing ports for every nat pool address and that is the reason of out-of-bound index in the worker array on out2in path due (port - 1024) / port_per_thread math. This was fixed in 5c9f9968de63fa627b4a72b344df36cdc686d18a, so packets to unused ports will go to existing worker and dropped there. Per RFC 6335 https://www.rfc-editor.org/rfc/rfc6335#section-6: 6. Port Number Ranges o the System Ports, also known as the Well Known Ports, from 0-1023 (assigned by IANA) o the User Ports, also known as the Registered Ports, from 1024- 49151 (assigned by IANA) o the Dynamic Ports, also known as the Private or Ephemeral Ports, from 49152-65535 (never assigned) According that let's allocate dynamic ports from 1024 and have full port range with a wide range of the workers number - 64 integer divisors in total, including pow2 ones: 1 wrk: n = (port_per_thread = 64512/1)*1 = 64512 + 1024 = 65536 2 wrk: n = (port_per_thread = 64512/2)*2 = 64512 + 1024 = 65536 3 wrk: n = (port_per_thread = 64512/3)*3 = 64512 + 1024 = 65536 4 wrk: n = (port_per_thread = 64512/4)*4 = 64512 + 1024 = 65536 5 wrk: n = (port_per_thread = 64512/5)*5 = 64510 + 1024 = 65534 6 wrk: n = (port_per_thread = 64512/6)*6 = 64512 + 1024 = 65536 7 wrk: n = (port_per_thread = 64512/7)*7 = 64512 + 1024 = 65536 8 wrk: n = (port_per_thread = 64512/8)*8 = 64512 + 1024 = 65536 ... Modulo from 5c9f9968de63fa627b4a72b344df36cdc686d18a is still required when the numbers of workers is not the integer divisor of 64512. Type: fix Fixes: 5c9f9968de63fa627b4a72b344df36cdc686d18a Change-Id: I9edaea07e58ff4888812b0d86cbf41a3784b189e Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
2022-09-12ipsec: introduce fast path ipv4 inbound matchingPiotr Bronowski1-0/+844
This patch introduces fast path matching for inbound traffic ipv4. Fast path uses bihash tables in order to find matching policy. Adding and removing policies in fast path is much faster than in current implementation. It is still new feature and further work needs and can be done in order to improve perfromance. Type: feature Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com> Change-Id: Ifbd5bfecc21b76ddf8363f5dc089d77595196675
2022-09-09vlib: don't leak node frames on reforkDmitry Valter1-0/+103
Free node frames in worker mains on refork. Otherwise these frames are never returned to free pool and it causes massive memory leaks if performed under traffic load Type: fix Signed-off-by: Dmitry Valter <d-valter@yandex-team.ru> Change-Id: I15cbf024a3f4b4082445fd5e5aaa10bfcf77f363
2022-08-19ipsec: enable UDP encap for IPv6 ESP tun protectMatthew Smith2-0/+160
Type: improvement If an SA protecting an IPv6 tunnel interface has UDP encapsulation enabled, the code in esp_encrypt_inline() inserts a UDP header but does not set the next protocol or the UDP payload length, so the peer that receives the packet drops it. Set the next protocol field and the UDP payload length correctly. The port(s) for UDP encapsulation of IPsec was not registered for IPv6. Add this registration for IPv6 SAs when UDP encapsulation is enabled. Add punt handling for IPv6 IKE on NAT-T port. Add registration of linux-cp for the new punt reason. Add unit tests of IPv6 ESP w/ UDP encapsulation on tun protect Signed-off-by: Matthew Smith <mgsmith@netgate.com> Change-Id: Ibb28e423ab8c7bcea2c1964782a788a0f4da5268
2022-08-18ikev2: accept key exchange on CREATE_CHILD_SAAtzm Watanabe1-9/+53
In RFC 7296, CREATE_CHILD_SA Exchange may contain the KE payload to enable stronger guarantees of forward secrecy. When the KEi payload is included in the CREATE_CHILD_SA request, responder should reply with the KEr payload and complete the key exchange, in accordance with the RFC. Type: improvement Signed-off-by: Atzm Watanabe <atzmism@gmail.com> Change-Id: I13cf6cf24359c11c3366757e585195bb7e999638
2022-08-17wireguard: fix fib entry trackingAlexander Chernavin1-0/+83
Type: fix After peers roaming support addition, FIB entry tracking stopped working. For example, it can be observed when an adjacency is stacked on a FIB entry by the plugin and the FIB entry hasn't got ARP resolution yet. Once the FIB entry gets ARP resolution, the adjacency is not re-stacked as it used to. This results in endless ARP requests when a traffic is sent via the adjacency. This is broken because the plugin stopped using "midchain delegate" with peers roaming support addition. The reason is that "midchain delegate" didn't support stacking on a different FIB entry which is needed when peer's endpoint changes. Now it is supported there (added in 36892). With this fix, start using "midchane delegate" again and thus, fix FIB entry tracking. Also, cover this in tests. Signed-off-by: Alexander Chernavin <achernavin@netgate.com> Change-Id: Iea91f38739ab129e601fd6567b52565dbd649371
2022-08-16tests: move "venv" to "build-root" directory from "test" directorySaima Yunus5-10/+8
Type: refactor - refactored VPP test code to remove "ignore_path" variable from "discover_tests" function and "run_test" code - configured VPP test makefile, config file, and 'run.sh' shell script to move "venv" directory from "test" dir to "build-root" dir Signed-off-by: Saima Yunus <yunus.saima.234@gmail.com> Change-Id: Id2beecbb99f24ce13ed118a1869c5adbef247e50
2022-08-11ip: Use .api declared error countersNeale Ranns5-25/+11
Type: improvement Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I822ead1495edb96ee62e53dc5920aa6c565e3621
2022-08-11ipsec: Use .api declared error countersNeale Ranns2-24/+12
Type: improvement Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ica7de5a493389c6f53b7cf04e06939473a63d2b9
2022-08-11arp: Use the new style error count declarationNeale Ranns1-3/+1
Type: improvement Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ifda8ca8d26912c750a77d2ca889e1638ca83d85a
2022-08-10ikev2: do not accept rekey until old SA is deletedAtzm Watanabe1-9/+39
Type: fix Signed-off-by: Atzm Watanabe <atzmism@gmail.com> Change-Id: I11b6107492004a45104857dc2dae01b9a5a01e3b
2022-08-09wireguard: add peers roaming supportAlexander Chernavin1-19/+247
Type: feature With this change, peers are able to roam between different external endpoints. Successfully authenticated handshake or data packet that is received from a new endpoint will cause the peer's endpoint to be updated accordingly. Signed-off-by: Alexander Chernavin <achernavin@netgate.com> Change-Id: Ib4eb7dfa3403f3fb9e8bbe19ba6237c4960c764c
2022-08-09wireguard: add handshake rate limiting supportAlexander Chernavin1-0/+168
Type: feature With this change, if being under load a handshake message with both valid mac1 and mac2 is received, the peer will be rate limited. Cover this with tests. Signed-off-by: Alexander Chernavin <achernavin@netgate.com> Change-Id: Id8d58bb293a7975c3d922c48b4948fd25e20af4b
2022-08-09ip-neighbor: ARP and ND stats per-interface.Neale Ranns2-0/+88
Type: feature stats of the like from: https://datatracker.ietf.org/doc/html/draft-ietf-rtgwg-arp-yang-model-03#section-4 Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Icb1bf4f6f7e6ccc2f44b0008d4774b61cae96184
2022-08-08wireguard: add dos mitigation supportAlexander Chernavin1-4/+187
Type: feature With this change: - if the number of received handshake messages exceeds the limit calculated based on the peers number, under load state will activate; - if being under load a handshake message with a valid mac1 is received, but mac2 is invalid, a cookie reply will be sent. Also, cover these with tests. Signed-off-by: Alexander Chernavin <achernavin@netgate.com> Change-Id: I3003570a9cf807cfb0b5145b89a085455c30e717
2022-08-08ikev2: fix rekeying with multiple notify payloadsAtzm Watanabe1-1/+8
Type: fix Signed-off-by: Atzm Watanabe <atzmism@gmail.com> Change-Id: I065bd5c26055d863d786023970e7deeed261b31c
2022-08-05tests: fix node variant selectionBenoît Ganne1-1/+1
Type: fix Fixes: 4830e4f78fb8e46b23a1a0711cd06969a77d8d95 Change-Id: Iddc73dbda633acd72bd82e52f8ae83c17e3940f6 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2022-08-04tests: run a test inside a QEMU VMNaveen Joy6-0/+809
Use the script test/run.py to run a test named test_vm_tap inside a QEMU VM. The run script builds out a virtual env, launches a light weight QEMU VM, mounts host directories, starts VPP inside the VM and runs the test. The test named test_vm_tap, creates two tap v2 interfaces in separate Linux namespaces and using iPerf, streams traffic between the VM and VPP. All data files are stored in the directory named /tmp/vpp-vm-tests. To clean up, use the make test-wipe command. Usage: test/run.py --vm --debug --test test_vm_tap Type: improvement Change-Id: I4425dbef52acee1e5b8af5acaa169b89a2c0f171 Signed-off-by: Naveen Joy <najoy@cisco.com>
2022-08-03wireguard: add processing of received cookie messagesAlexander Chernavin3-5/+199
Type: feature Currently, if a handshake message is sent and a cookie message is received in reply, the cookie message will be ignored. Thus, further handshake messages will not have valid mac2 and handshake will not be able to be completed. With this change, process received cookie messages to be able to calculate mac2 for further handshake messages sent. Cover this with tests. Signed-off-by: Alexander Chernavin <achernavin@netgate.com> Change-Id: I6d51459778b7145be7077badec479b2aa85960b9
2022-07-15tests: add fast path ipv6 python tests for outbound policy matchingPiotr Bronowski2-6/+857
This patch introduces set of python tests for fast path ipv6, based on ipv4 tests. Some missing parts of ipsec framework has been added in order to test ipv6 implementation. Type: feature Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com> Change-Id: Icc13322787d76485c08106bad2cb071947ad9846
2022-06-29ipsec: add fast path python testsFan Zhang2-0/+782
This patch introduces set of python tests for fast path, based on flow cache tests. There was a bug in calculating of policy mask when adding to fast path, which has been fixed. Memory size for bihash tables for both ip4 and ip6 outbound fast path policies has been increased. Type: feature Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com> Change-Id: Ibeee904ae7179f5dafbd45bb44282436f0b80821
2022-06-28session quic: allow custom config of rx mqs seg sizeFlorin Coras1-1/+1
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: Idc0fdebfea29c241d8a36128241ccec03eace5fd
2022-06-28ipsec: change wildcard value for any protocol of spd policyPiotr Bronowski5-21/+21
Currently 0 has been used as the wildcard representing ANY type of protocol. However 0 is valid value of ip protocol (HOPOPT) and therefore it should not be used as a wildcard. Instead 255 is used which is guaranteed by IANA to be reserved and not used as a protocol id. Type: improvement Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com> Change-Id: I2320bae6fe380cb999dc5a9187beb68fda2d31eb
2022-06-10vcl: fix iperf3 server crash issue when it runs over vpp host stack.Liangxing Wang1-0/+11
Issue: Let iperf3 server run via ldp and vcl on top of vpp's host stack. If iperf3 client connects this iperf3 server with tcp MSS setting option, iperf3 server will always crash. Root cause: When MSS option is specified by iperf3 client, iperf3 server will recreate the listening socket firstly, then call setsockopt() to set MSS immediately. Iperf3 code can be referred here: https://github.com/esnet/iperf/blob/58332f8154e2140e40a6e0ea060a418138291718/src/iperf_tcp.c#L186. However, in vcl layer vpp_evt_q of this recreated session is not allocated yet. So iperf3 server crashes with vpp_evt_q null pointer access. Fix: Add session vpp_evt_q null pointer check in vcl_session_transport_attr(). Add a vcl test case for this MSS option scenario. Type: fix Signed-off-by: Liangxing Wang <liangxing.wang@arm.com> Change-Id: I2863bd0cffbe6e60108ab333f97c00530c006ba7
2022-06-05wireguard: fix crash by not sending arp via wg interfaceAlexander Chernavin1-8/+54
Type: fix Currently, neighbor adjacencies on a wg interface are converted into a midchain only if one of the peers has a matching allowed prefix configured. If create a route that goes through a wg interface but the next-hop address does not match any allowed prefixes, an ARP/ND request will try to be sent via the wg interface to resolve the next-hop address when matching traffic occurs. And sending an ARP request will cause VPP to crash while copying hardware address of the wg interface which is NULL. Sending an ND message will not cause VPP to crash but the error logged will be unclear (no source address). With this fix, convert all neighbor adjacencies on a wg interface into a midchain and update tests to cover the case. If there is no matching allowed prefix configured, traffic going such routes will be dropped because of "Peer error". No changes if there is matching allowed prefix configured. Also, fix getting peer by adjacency index. Signed-off-by: Alexander Chernavin <achernavin@netgate.com> Change-Id: I15bc1e1f83de719e97edf3f7210a5359a35bddbd
2022-05-24tests: fix ipsec sdp cases with parrallel jobTianyu Li2-10/+10
Serveral IPSec SPD cases re-use the same test class name, leads to test error when do parrallel test with TEST_JOBS=16, change the test class names to unique values. Type: fix Fixes: 7cd35f5d688d9e3bddf66602655274dae944b086 Signed-off-by: Tianyu Li <tianyu.li@arm.com> Change-Id: Ia5768654ddb6274531222761cc82b226d97325a9
2022-05-24tests: fix default failed dir settingKlement Sekera2-8/+7
When running tests via run.sh, default setting of None would cause failed directory symlink to appear in vpp workspace with an ugly name. This patch places the symlink in temporary directory. Type: fix Fixes: b23ffd7ef216463c35b75c831e6a27e58971f4ec Signed-off-by: Klement Sekera <klement.sekera@gmail.com> Change-Id: Ic1715eba7ac1f82f71855e2aeb9b659d27bbb3af
2022-05-16flowprobe: add api messages to obtain current stateAlexander Chernavin1-1/+92
Type: improvement With this change: - add dump/details messages to obtain interfaces for which IPFIX flow record generation is enabled; - add get message to obtain parameters; - add a new message to set parameters with validation present and to correspond with get/set naming; - add tests for get/set parameters and dump/details interfaces. Change-Id: I09f6ec990171ac8bcb9d2f5c92629803b8ab6c28 Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
2022-05-13tests: fix pnat tests formattingAlexander Chernavin1-51/+53
Type: fix Signed-off-by: Alexander Chernavin <achernavin@netgate.com> Change-Id: I944dc8418e7ab541ae96141c15e04abb33635ac4
2022-05-13flowprobe: add support for reporting on inbound packetsAlexander Chernavin1-36/+148
Type: feature Currently, the plugin supports only IPFIX flow record generation for outbound packets. With this change: - add a new API message for enabling the feature on an interface that accepts direction (rx, tx, both); - update existing debug command for feature enabling to accept direction; - update existing debug command for showing currently enabled feature on interfaces to display direction; - update templates to include a direction field; - generate flow records on the specified direction and data path; - report direction in flow data; - update tests to use the new API; - add tests for inbound flows. Change-Id: I121fd904b38408641036ebeea848df7a4e5e0b30 Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
2022-05-12pnat: add support to wildcard IP Protocol field if not specifiedFahad Naeem1-0/+99
- add pnat_binding_add_v2 which explicitly requires match mask to set to PNAT_PROTO if we want to match on IP Protocol - fix pnat_binding_add backward compatibility i.e. no need to set match mast to PNAT_PROTO Type: improvement Signed-off-by: Fahad Naeem <fahadnaeemkhan@gmail.com> Change-Id: I5a23244be55b7d4c10552c555881527a4b2f325f
2022-05-11tests: fix checkstyle-pythonKlement Sekera1-1/+1
Add --check to black to pass back error value and fail checkstyle if a reformat would occur. Type: fix Fixes: d9b0c6fbf7aa5bd9af84264105b39c82028a4a29 Signed-off-by: Klement Sekera <klement.sekera@gmail.com> Change-Id: I9a1fbe224929fc461ff833a589f73ca06e7cc9d6
2022-05-10tests: replace pycodestyle with blackKlement Sekera195-27443/+36387
Drop pycodestyle for code style checking in favor of black. Black is much faster, stable PEP8 compliant code style checker offering also automatic formatting. It aims to be very stable and produce smallest diffs. It's used by many small and big projects. Running checkstyle with black takes a few seconds with a terse output. Thus, test-checkstyle-diff is no longer necessary. Expand scope of checkstyle to all python files in the repo, replacing test-checkstyle with checkstyle-python. Also, fixstyle-python is now available for automatic style formatting. Note: python virtualenv has been consolidated in test/Makefile, test/requirements*.txt which will eventually be moved to a central location. This is required to simply the automated generation of docker executor images in the CI. Type: improvement Change-Id: I022a326603485f58585e879ac0f697fceefbc9c8 Signed-off-by: Klement Sekera <klement.sekera@gmail.com> Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2022-05-05policer: output interface policerStanislav Zaikin3-22/+55
Type: improvement Change-Id: Ibc1b5059ed51c34334340534e9eb68121f556bce Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com>
2022-05-05udp: remove buggy assert in udp encapBenoît Ganne1-2/+38
It looks like in a distant past we were using a vnet_rewrite but this no longer the case. Type: fix Change-Id: Ib8d336aec7d5abd7749f543739f531144e76e551 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2022-05-04vhost: use_custom_mac set in create_vhost_user_if_v2Fahad Naeem1-0/+28
Type: fix set use_custom_mac for args in create_vhost_user_if_v2 API Add testcase for custom mac-address Signed-off-by: Fahad Naeem <fahadnaeemkhan@gmail.com> Change-Id: Iac64d818e0f1e6d36187fe769ee33d202aaafd05 Signed-off-by: Fahad Naeem <fahadnaeemkhan@gmail.com>
2022-05-03tests: handle removed interfaceKlement Sekera3-22/+29
Catch exception if sw_if_index is invalid when querying interface binding config. If the interface is not there, it's surely not bound to any table ... Type: improvement Change-Id: I1f3e04a631653feb5c2350662b6a041adccefa1f Signed-off-by: Klement Sekera <klement.sekera@gmail.com>