aboutsummaryrefslogtreecommitdiffstats
path: root/test
AgeCommit message (Collapse)AuthorFilesLines
2017-08-03DHCP Client: receive unicast ACKsNeale Ranns1-21/+71
despite VPP DHCP client setting neither ciaddr nor giaddr and setting the broadcast bit (see RFC 2131 section 4.1) some DHCP servers will still send a unicast DCHPACK. So as not to drop this VPP must have both 1) a receive FIB entry for the OFFERED IP adress and 2) a 'don't drop me because of uRPF' FIB entry for the DHCP server's address. Change-Id: I167d858deb45629318cbdccf5bf67d971730a42f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-01Tests for recursive load-balancing with no choices.Neale Ranns2-5/+68
Change-Id: I90bb3369576741d03628a818ffa63cc99d6e4c98 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-01P2P EthernetPavel Kotucek3-0/+586
Change-Id: Idb97e573961b3bc2acdeef77582314590795f8c3 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-07-24SPAN:add l2 mirrorEyal Bari2-33/+322
added span feature nodes for l2-input / l2-output Change-Id: Ib6e0ce60d0811901b6edd70209e6a4c4a35cd8ff Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-07-21SNAT: in2out translation as an output feature hairpinning (VPP-913)Matus Fabian1-1/+1
Change-Id: I3790739683c6090ffb2aefb4758bd4275856c09a Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-07-20SNAT: in2out translation as an output feature (VPP-903)Matus Fabian2-0/+169
in2out translation as an output feature on the outside interface (postrouting) Change-Id: I32c0311be09bdf102b9a0885b8b89c7588cb558f Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-07-18make test: improve console output messagesKlement Sekera1-3/+3
Remove the word derp and replace it with a proper, more gramatically correct message. Change-Id: I04fd44cc67dace1a31ca48fc8ce67b246162ba79 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-07-18DHCP client option 61 "client_id"Neale Ranns2-2/+34
the existing seeting of client_id to a VPP version number was unused and so overridden Change-Id: If9ebea936336f1fcca8d07e67186c95f8f8f0ccd Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-07-18DHCP client - remove interface address when DHCP de-configuredNeale Ranns2-21/+152
Change-Id: I63c59e3c13859b51999d283774f7783ef0a6a5ed Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-07-18TEST:add l2bd nd term testsEyal Bari1-6/+119
Change-Id: I67633175d50a70a0b8ae4f85c659b93070f8e1fb Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-07-07SNAT: Fallback to 3-tuple key for non TCP/UDP sessions (VPP-884)Matus Fabian1-1/+246
Change-Id: I4868ff6e81c579b29d3ea066976ae145f8b83e9e Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-07-04TEST:add L2BD arp term testsEyal Bari3-0/+273
Change-Id: I42414da9663ecfc8dfe5baf3e6615cf3b9b02e22 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-07-03SNAT: fix failing test_session_limit_per_user (VPP-896)Matus Fabian1-0/+2
Change-Id: Idf46a03803125babd9bb880363686359fbcca27d Signed-off-by: Matus Fabian <matfabia@cisco.com> (cherry picked from commit 860af5ad2b023f9c57d622a7a9d3bd0099e480b1)
2017-06-27L2-LEARN:fix l2fib entry seq num not updated on hit (VPP-888)Eyal Bari1-29/+29
fixed instability in l2bd_multi_instnce test - sometimes failing with extra packets captured it appears l2-learn was not updating hit entries but rather a copy of them. if the ager did not have a chance to run before the test was running the learning cycle - entries were not updated with the packet's seq num - causing packets to flood when hitting the stale seq_num in l2-fwd - hence the extra packets fixed handling of filter entries revert workaround for instability in test Change-Id: I16d918e6310a5bf40bad5b7335b2140c2867cb71 Signed-off-by: Eyal Bari <ebari@cisco.com> (cherry picked from commit 25ff2ea3a31e422094f6d91eab46222a29a77c4b)
2017-06-27FLOWPROBE: Add flowstartns, flowendns and tcpcontrolbitsOle Troan1-10/+96
- fixed problem with tcp_flag - changed flowtimestamp into NTP format Change-Id: I4ef05d6c69c5c078a0c80d59c5ccb0c85b924ba6 Signed-off-by: Ole Troan <ot@cisco.com>
2017-06-21acl-plugin: CLI to clear all sessionsAndrew Yourtchenko1-0/+37
It is useful to have the CLI to clear the existing sessions. There was a work-in-progress CLI but it did not work properly. Fix it and split into a separate "clear acl-plugin sessions", and add a unit test into the extended connection-oriented tests. Change-Id: I55889165ebcee139841fdac88747390903a05394 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-06-21NAT64: custom prefixMatus Fabian2-7/+164
Change-Id: If397b49861468eed29b964fa64b186f80eb0eceb Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-06-21ARP: ignore non-connected routes and non-interface sources when determing if ↵Neale Ranns1-2/+70
source is connected Change-Id: I39fb0ec44cc322eaa12c0ff0700fc405d3982bfc Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-06-21L2-VTR: add vtr testsEyal Bari4-65/+455
re-enable l2 fib flush tests reorder l2bd multi instance tests - move flags test as last enabling of uu-flood will now flood when entry is stale Change-Id: I052663ec3eb4acee5f296fb7525dd535924e0003 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-06-20SNAT: unknow protocol hairpinning fixMatus Fabian1-2/+57
Change-Id: I15813167e7c8529f229143de4a8f64f0fb530951 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-06-19L2FWD:fix seq_num overwritten + validate l2fib entries when forwardingEyal Bari1-3/+0
l2_classify memeber table_index was overlaid over l2.l2fib_seq_num which over written when table_index gets initialized in l2_input_classify solved by overlaying both table_index and opaque_index as only one is used seperated l2fib seq num from l2_input configs for better handling of theoretical ABA issue where an entry for a deleted interface is considered valid by the ager because a different interface with same sw_if_index and seq_num was created before the ager got a chance to delete Change-Id: I7b0eeded971627406f1c80834d7e02c0ebe62136 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-06-19SNAT: NAT packet with unknown L4 protocol if match 1:1 NATMatus Fabian1-1/+49
Change-Id: Ic81c6098d615fdb6a874e532921efd833fed872c Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-06-19acl-plugin: bihash-based ACL lookupAndrew Yourtchenko3-0/+18
Add a bihash-based ACL lookup mechanism and make it a new default. This changes the time required to lookup a 5-tuple match from O(total_N_entries) to O(total_N_mask_types), where "mask type" is an overall mask on the 5-tuple required to represent an ACE. For testing/comparison there is a temporary debug CLI "set acl-plugin use-hash-acl-matching {0|1}", which, when set to 0, makes the plugin use the "old" linear lookup, and when set to 1, makes it use the hash-based lookup. Based on the discussions on vpp-dev mailing list, prevent assigning the ACL index to an interface, when the ACL with that index is not defined, also prevent deleting an ACL if that ACL is applied. Also, for the easier debugging of the state, there are new debug CLI commands to see the ACL plugin state at several layers: "show acl-plugin acl [index N]" - show a high-level ACL representation, used for the linear lookup and as a base for building the hashtable-based lookup. Also shows if a given ACL is applied somewhere. "show acl-plugin interface [sw_if_index N]" - show which interfaces have which ACL(s) applied. "show acl-plugin tables" - a lower-level debug command used to see the state of all of the related data structures at once. There are specifiers possible, which make for a more focused and maybe augmented output: "show acl-plugin tables acl [index N]" show the "bitmask-ready" representations of the ACLs, we well as the mask types and their associated indices. "show acl-plutin tables mask" show the derived mask types and their indices only. "show acl-plugin tables applied [sw_if_index N]" show the table of all of the ACEs applied for a given sw_if_index or all interfaces. "show acl-plugin tables hash [verbose N]" show the 48x8 bihash used for the ACL lookup. Change-Id: I89fff051424cb44bcb189e3cee04c1b8f76efc28 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-06-19NAT64: Hairpinning (VPP-699)Matus Fabian1-14/+271
Change-Id: I83a6c277fa211ac2c2ca2d603650c992886af0a7 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-06-13Flowprobe - tests speed-upPavel Kotucek1-183/+151
Updated test to reduce tests runtime. Change-Id: I7904628fc19d349d6c26502e49d4c990cb8816ff Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-06-13SNAT: fix 1:1 NAT without port hairpinning TCP checksum updateMatus Fabian1-0/+17
Change-Id: I5077fcf3671a6116b475f87e43120efc10ecaa08 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-06-12L2FIB:fix crash in show with deleted subif entriesEyal Bari1-0/+3
after deleting a sub interface it's l2fib entries are left with a dangling sw_if_index (while waiting for the ager to delete them). changed "show l2fib" to reflect that state with "Deleted" as the interface name. added sleep in test_l2_fib as a workaround for packets still passing after flush will investigate... Change-Id: Id998d7d3c6a073ef5005c5f3009e1cfb7febf7db Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-06-09NAT64: ICMP error supportMatus Fabian1-0/+90
Added ICMP error messages translation. Added check for multi thread (not supported yet, so init failed). Added API definition for custom NAT64 refix. Change-Id: Ice2f04631af63e594aecc09087a1cf59f3b676fb Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-06-08NAT64: Add NAT64 support for snat plugin (VPP-699)Matus Fabian2-5/+530
Basic NAT64 feature (no hairpinning, no multi-thread). Change-Id: I392fccbce93e70c117f4a9a7ec7cf08d6c537f2d Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-06-07make test: improve debugabilityKlement Sekera2-2/+3
Introduce faulthandler to print stack trace to stderr on python crash. Don't disable automatic garbage collection to decrease the chances of running out of memory. Change-Id: I6927a5f6ea9569735d084d4ed3d258950a400d74 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-06-06Packets recieved on VLAN-0 map to the main interfaceNeale Ranns2-2/+106
Change-Id: I21b1ad39275495d4d006023b58f630a213445854 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-06-06Rework vxlan-gpe to support FIB 2.0 and bypass modeHongjun Ni2-0/+348
Change-Id: I0324f945bdb4dd3b19151be6f3ce24a47a000104 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2017-06-05SNAT: fix ICMP hairpinningMatus Fabian1-2/+164
Change-Id: I9d63133bd1db72917571ade868040c4597c896a1 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-06-01IP Mcast - recalculate on interface up/dowmNeale Ranns1-18/+24
Change-Id: Ie5b88fd7187ed62218a2e4e0e493c33e3e9ecc2f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-06-01make test: add suddenly missing dependency (six module)Klement Sekera1-1/+1
Change-Id: I121eaee6b752a6b3bfe1d5ecf803f67147c77beb Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-05-30Flowprobe: Stateful flows and IPv6, L4 recordingOle Troan2-173/+967
Change-Id: I67839281623721bf42f0a918a53356143d9dc78a Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Pavel Kotucek <pkotucek@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com>
2017-05-26MPLS lookup DPO does not pop the label (nor does it handle replicate)Neale Ranns1-0/+20
Change-Id: I7de6b96631d1645d0eadd38525860d84d78e316d Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-26ARP/ND use path_remove to complement path_addNeale Ranns2-0/+196
don't add duplicate extensions. Change-Id: Icf72d6e1b004d0dda532bec2b51f6b74544925bb Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-25MPLS hash function improvementsNeale Ranns3-41/+142
Change-Id: I28e98f445c01493562b6196a4f5b532a51f178af Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-24SNAT: fix IPFIX data src and dst portMatus Fabian1-4/+29
Change-Id: Ifa9582962710a3601fcccbbf388529043fc7f08a Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-05-24Missing VLIB node for IPv6 disposition from mcast MPLS LSPNeale Ranns2-8/+78
Change-Id: Ibc0e1910a4926fdfbf74571efb5fd5810bfa09da Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-24Leak locks and tables in the ClassifierNeale Ranns1-2/+33
Change-Id: Iae04c57bba87ab3665388eadd0805f75171636a5 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-24TEST/L2BD:fix flush testsEyal Bari1-66/+107
flush tests will now enable learning on the bridge, and send broadcast packets to add dynamic entries to the l2_fib. it will then disable learning, flush, and will verify packets are not forwarded to flushed "hosts". Change-Id: Ie6f123e59f6c89af511bdc5a02dd199420c424e9 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-05-23Labelled attached paths via an MPLS tunnelNeale Ranns1-2/+25
Change-Id: Ic86617c9c3217122043656ce2ea70bb106df5b2d Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-22Skip L2 FIB flush testsNeale Ranns1-0/+9
These tests attempt to flush static entries from a bridge-domain that has no aging configured. for both reasons it will fail. The fact thtat they occationally pass is due to the fact that the assert_nothing_cpatured does not actually capture packets, so it misses the fact that there are some. Change-Id: Ie5c98a42944e29a3d482156f7e9246511380372f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-17VPP-719: Accept ARP replies from VRRP hw addrMatthew Smith1-0/+75
Check whether an ARP src hw addr starts with 00:00:5e:00:01 before rejecting due to a mismatch between ARP src hw addr and ethernet frame src addr. Change-Id: Ia3ecd5d6dba34876aca8d90bc622a0a1397e48fb Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2017-05-17ARP learning fixes (VPP-843)Neale Ranns1-8/+30
learn ARP peers if, 1) it's a reply to a local address, 2) we are sending a response to a request. send proxy ARP responses only in the interface the request was sent. Change-Id: I22b949c65122824233076492b7dd537daca07bc2 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-16L2FIB: add flush testEyal Bari2-103/+219
add tests for flush int/bd/all Change-Id: Ia589ec5925b9c8acbb2fc16dafbf4842aa1a6eff Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-05-15Add GTP-U plugin. VPP-694Hongjun Ni2-0/+321
Basic GTP-U feature Change-Id: I31226f890a92c5303ac06e112ed7820cae52d9bd Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2017-05-11make test: support coverage for out-of-tree pluginsKlement Sekera1-0/+6
Change-Id: Ibd7828b1e1c699630ff450122d8aa317b1c9da26 Signed-off-by: Klement Sekera <ksekera@cisco.com>