aboutsummaryrefslogtreecommitdiffstats
path: root/test
AgeCommit message (Collapse)AuthorFilesLines
2020-12-10tests: check ethernet type in arp test caseElias Rudberg1-0/+4
Add assertions to verify correct ethernet type field in ARP test case. Type: test Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net> Change-Id: I1d2671b0ab2b4dcb53dab4b54bf93578d6bc86a3
2020-12-08tests: restore vapi C++ test under Centos-8Paul Vinciguerra2-9/+1
The Centos-7 compiler had problems with vapi_cpp_test.cpp. The Centos-8 compiler does not. This change adds back the test. ============================================================================== VAPI test ============================================================================== run C VAPI tests 1.55 OK run C++ VAPI tests 0.44 OK ============================================================================== TEST RESULTS: Scheduled tests: 2 Executed tests: 2 Passed tests: 2 ============================================================================== Type: test Change-Id: Ic6a655ae99eb3ba0e73b7feef4436a0ca5fd92be Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-12-08fib: Source Address SelectionNeale Ranns2-25/+144
Type: feature Use the FIB to provide SAS (in so far as it is today) - Use the glean adjacency as the record of the connected prefixes = there's a glean per-{interface, protocol, connected-prefix} - Keep the glean up to date with whatever the recieve host prefix is (since it can change) Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: I0f3dd1edb1f3fc965af1c7c586709028eb9cdeac
2020-12-07tests: py2 cleanup - remove subclassing of objectPaul Vinciguerra8-18/+18
Type: refactor Change-Id: I9096e3b473110350e1e8e5936e3c4c164f8969a7 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-12-06tests: remove the dependency on subprocess32Paul Vinciguerra2-14/+1
Type: test Change-Id: I39afe56a085648d881a18c7eafcf7caf2f375f31 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-12-06tests: refactor ForeignAddressFactoryPaul Vinciguerra1-13/+0
Move ForeignAddressFactory back to test_lisp. It is the only test that uses the code and has embedded addresses specific to the test. Type: test Change-Id: If1a39f9b167e36dd7aff7481350ddb8fe17155d2 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-12-03tests: remove py2/py3 six compatability libraryPaul Vinciguerra9-37/+18
Type: test Change-Id: Idb6b8169845e0239e639429ccfd02a683212b7e6 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-12-03tests: fix typo in numbered list in documentationElias Rudberg1-5/+6
Fix a typo in numbered list in the documentation. Also mention possibility of using TEST= to run a specific test. Type: fix Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net> Change-Id: I026703af014493afb3dea2d9ad99a7bb510b135d
2020-12-03tests: remove aenum libraryPaul Vinciguerra2-5/+1
the aenum library was used to provide intflag functionality for python versions earlier than 3.6 Type: test Change-Id: I914d390ee5364f337006c1c59abafe4b9a3c1bde Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-12-02tests: add type annotations to the vpp object abstract classPaul Vinciguerra1-12/+12
make it easier to detect logical mistakes. Type: test Change-Id: I853748ffaeebc545c8d31299f0d105405ad80bba Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-12-01tests: remove ip_punt from vpp_papi_provider and add ip_punt object modelsJakub Grajciar5-91/+103
Type: refactor Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: I1bf53c2554e6b313467f618717698ed158db9065 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2020-11-30tests: Fix unversioned python shebang linesDave Wallace3-3/+3
- Unversioned python shebang lines may cause mixed python 2.7 and python 3 execution in make test. Type: fix Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: Ia82c37be33902718c48878378b8343eedb76c2c8
2020-11-30tests: IPv6 multicast over GRENeale Ranns1-0/+76
Type: test Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I6fc907ba923581540380bc9b456b5183fc100775
2020-11-26vlib: clean up event-logger CLIDave Barach1-7/+7
Change "elog trace" to "event-logger trace"; corresponding change in test/test_vlib.py, verified that the vlib test vectors still pass even though they're not run on a regular basis ("make GCOV_TESTS=yes TEST=test_vlib ...") Type: improvement Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Idee4aa036573865e071a9bab87e27fb5d53b4933
2020-11-26fib: Only track cover if activatedNeale Ranns1-5/+9
Type: fix also cleanup any tracking at delete Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Id1037920c88c63e2029384af931064c00ed497aa
2020-11-25ipsec: A P2MP ipsec interface is NBMANeale Ranns1-0/+2
Type: fix Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I1922463683201215933e9f85b587d7c7123f3bfd
2020-11-25ip-neighbor: Send API event when neighbor is removedNeale Ranns1-0/+35
Type: fix Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: I9952497a108bac26445af95c28d4eed46099c2fc
2020-11-24tests: remove bond, pipe, session and api_namespace from vpp_papi_providerJakub Grajciar5-61/+12
Type: refactor Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: I5052fc1fd82b5d17c1ed66fee5185addf60b9eb6
2020-11-24tests: remove svs, proxy_arp and gso from vpp_papi_providerOle Troan3-85/+13
Type: refactor Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I916a386af48fd558b4749e206b2bc4b82a888512 Signed-off-by: Ole Troan <ot@cisco.com>
2020-11-24tests: [re]enable an ARP test form incompleteNeale Ranns1-8/+3
Type: test must have been disabled when another test of the same name was added Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I108582a68cc3ac81c03ab641f562ff22947baf30
2020-11-20ip-neighbor: Use ip_address_t rather than ip46_address_tNeale Ranns2-1/+8
Type: improvement Change-Id: Ica5f395075677bda5f38d28e704f65350af88610 Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-11-17tests: move crypto tests to src/vnet/crypto/testDave Wallace1-28/+0
- Refactor make test code to be co-located with the vpp feature source code Type: test Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I089bda44c31cbb217132e5b385cd9ea96ea5239e
2020-11-17tests: move classifier tests to src/vnet/classify/testDave Wallace2-1059/+0
- Refactor make test code to be co-located with the vpp feature source code. Type: test Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: Ibae85a18df0d5a53e2a59c678a2a27499f54ce6d
2020-11-17tests: move vpp-api tests to src/vpe-api/testDave Wallace3-174/+0
- Refactor make test code to be co-located with the vpp feature source code Type: test Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: Ic42bbd4e13606a5fdc91143ecc6452102ec337fe
2020-11-17tests: move gre tests to src/vnet/gre/testDave Wallace1-1275/+0
- Refactor make test code to be co-located with the vpp feature source code Type: test Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I4fa716778712ebfb1b136df98775345372d3dfad
2020-11-17tests: move GSO/GRO tests to src/vnet/gso/testDave Wallace2-855/+0
- Refactor make test code to be co-located with the vpp feature source code Type: test Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: Id9c5bf2cd01b6c1fd1750b4978d01597ee3bbf53
2020-11-16tests: move cli tests to src/vlib/testDave Wallace1-89/+0
- Refactor make test code to be co-located with the vpp feature source code Type: test Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: Ic27fb8c476cfd95879dec645c3c0cd6db341ee00
2020-11-16tests: move buffer tests to src/vlib/testDave Wallace1-29/+0
- Refactor make test code to be co-located with the vpp feature source code. Type: test Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: Id3f856d9c8de1695edd5b968b8acfa2b382a0139
2020-11-16tests: move bihash tests to src/vppinfra/testDave Wallace1-71/+0
- Refactor make test code to be co-located with the vpp feature source code. Type: test Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I0133a00def595fe1c08ab881633ef9f89148a286
2020-11-10classify: fix classify filter trace del cli processingJon Loeliger2-7/+5
When a 'del' is used to delete a classify table, only the mask is needed to locate the table. Any match vector is unneeded. The tests failed to notice this, but if the test is run by hand in vppctl, it issues a parse error. Fix the test so that it doesn't supply irrelevant data. Fix the CLI processing to read always complete newline terminated line of input instead. This allows unneeded CLI parameters to be ignored. It also necessitated fixing a trace test which had then erroneously split a single CLI command over multiple lines. While in the area, fix a latent bug on table matching where a test for compatible mask vector sizes were not matching impedance properly (byte vs ux32x4). Type: fix Signed-off-by: Jon Loeliger <jdl@netgate.com> Change-Id: I1177ab1dd417f3d11f30eecbaa2b0fb1015c3ab5
2020-11-02ipsec: Tunnel SA DSCP behaviourNeale Ranns6-25/+230
Type: feature - use tunnel_encap_decap_flags to control the copying of DSCP/ECN/etc during IPSEC tunnel mode encap. - use DSCP value to have fixed encap value. Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: If4f51fd4c1dcbb0422aac9bd078e5c14af5bf11f
2020-10-21ipsec: support for multipoint on ipsec interfacesNeale Ranns2-4/+128
Type: feature Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Iae9fe35cfbce4c675fa25e0800c0f4629a83e012
2020-10-21ip: convert u32 entry_flags to vl_api_mfib_entry_flags_t on mroute APINeale Ranns6-140/+185
Type: fix This is not an API change, it's the same values, just a different named type. also use VppEnum values in tests Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I3a18b529514f3cc9467ae4e8ac3e88d067fc776b
2020-10-16misc: deprecate VOMDamjan Marion3-2378/+3
Type: make Change-Id: Ifb3e52af93d24fcc2f2e6a0c408e16902a2fe553 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-10-16ipsec: fix instance, and cli del for new ipsec interfaceEric Kinzie2-4/+23
- use user instance number in interface name Restore the behavior of previous versions where the IPsec tunnel interface name contained the value of the user-provided instance number. For example, a command similar to create ipsec tunnel local-ip . . . instance 5 would result in the creation of interface "ipsec5". - ipsec: delete tunnel protection when asked The "ipsec tunnel protect" command will parse a "del" argument but does not undo the tunnel protection, leaving the SAs hanging around with reference counts that were incremented by a previous invocation of the command. Allow the tunnel protection to be deleted and also update the help text to indicate that deletion is an option. - test: ipsec: add test for ipsec interface instance Also cleanup (unconfig) after TestIpsecItf4 NULL algo test. Type: fix Fixes: dd4ccf2623b5 ("ipsec: Dedicated IPSec interface type") Signed-off-by: Eric Kinzie <ekinzie@labn.net> Signed-off-by: Christian Hopps <chopps@labn.net> Change-Id: Idb59ceafa0633040344473c9942b6536e3d941ce
2020-10-08gre: MPLS over GRE does not select correct fixup functionNeale Ranns1-1/+55
Type: fix Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I9eff41407b0f172f2b567e6a4ea1c48be8df883a
2020-10-08ip-neighbor: Grat ARPs from different subnet are droppedNeale Ranns2-1/+33
Type: test Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Id07e8981a903f11f50fb494a93d01815382025e4
2020-10-08ipsec: Allow SAs with NULL auth &crypto on IPSec interfaceNeale Ranns1-4/+25
Type: improvement on the dedicated IPSec interface, the SA describes the peer, so it is not possible to forward to a peer for which there is no SA. Therefore if an SA is added with NULL auth and integ then this explicitly states that this is what the peer desires. on the contrary on the IP-IP/GRE interface, in the absence of protection and an SA, then the traffic is sent in the clear. So adding NULL auth/crypto iSA is a means to describe that the peer should not be sent traffic. Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I7ad2d466cc74eb7ff8c4c84e0d7897d06e2fcf86
2020-10-08fib: Register multicast MAC with interface for accepting interfacesNeale Ranns1-2/+33
Type: fix Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Ic6c76b65e2dcc08916373153944507a297c962c0
2020-10-07api: add heap alloc to vpp statsOle Troan1-1/+0
The Python VPP Stats module also used the VPP heap. Fix so it now explicitly allocates a heap. Fixes: f68fccfe7e188fec2c9f91da38ca9acf6f67d811 Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I0bd4ae64d6c89cdf634d8d9a91c23ab38017c5cc Signed-off-by: Ole Troan <ot@cisco.com>
2020-09-30ikev2: better packet parsing functionsFilip Tehlar1-0/+24
Ticket: VPP-1918 Type: improvement Change-Id: I2bc3e30121697404dcd54f1c2127bd85ccc1029e Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2020-09-22lisp: Move to pluginNeale Ranns2-208/+2
Type: refactor Change-Id: I54df533a8f863c4e49742903cf2457f18b4fc506 Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-09-21geneve: Move to pluginNeale Ranns1-307/+0
Type: refactor Change-Id: I613bf4d6517591351b212bfe6c8d93abf235f5dc Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-09-21misc: Move l2tp to pluginNeale Ranns1-47/+0
Type: refactor Change-Id: Ifb36eeb146b87e9e305881429d32d6879e955e1e Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-09-21build: remove opensuse build infraDave Wallace1-1/+1
- VPP on opensuse has not been supported for several releases. Type: fix Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I2b5316ad5c20a843b8936f4ceb473f932a5338d9
2020-09-17teib: Add adj-fibs for peers/adjacencies on p2mp interfaceNeale Ranns2-4/+52
Type: fix Change-Id: I6fdc4e952097e92ac3aa53e0be3ef99e0d801b28 Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-09-09wireguard: initial implementation of wireguard protocolArtem Glazychev2-1/+5
Type: feature The main information about plugin you can see in README.md vpp# wireguard ? wireguard create wireguard create listen-port <port> private-key <key> src <IP> [generate-key] wireguard delete wireguard delete <interface> wireguard peer add wireguard peer add <wg_int> public-key <pub_key_other>endpoint <ip4_dst> allowed-ip <prefix>dst-port [port_dst] persistent-keepalive [keepalive_interval] wireguard peer remove wireguard peer remove <index> Change-Id: I85eb0bfc033ccfb2045696398d8a108b1c64b8d9 Signed-off-by: Artem Glazychev <artem.glazychev@xored.com> Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Jim Thompson <jim@netgate.com> Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-09-07ipsec: fix padding/alignment for native IPsec encryptionChristian Hopps4-33/+101
Not all ESP crypto algorithms require padding/alignment to be the same as AES block/IV size. CCM, CTR and GCM all have no padding/alignment requirements, and the RFCs indicate that no padding (beyond ESPs 4 octet alignment requirement) should be used unless TFC (traffic flow confidentiality) has been requested. CTR: https://tools.ietf.org/html/rfc3686#section-3.2 GCM: https://tools.ietf.org/html/rfc4106#section-3.2 CCM: https://tools.ietf.org/html/rfc4309#section-3.2 - VPP is incorrectly using the IV/AES block size to pad CTR and GCM. These modes do not require padding (beyond ESPs 4 octet requirement), as a result packets will have unnecessary padding, which will waste bandwidth at least and possibly fail certain network configurations that have finely tuned MTU configurations at worst. Fix this as well as changing the field names from ".*block_size" to ".*block_align" to better represent their actual (and only) use. Rename "block_sz" in esp_encrypt to "esp_align" and set it correctly as well. test: ipsec: Add unit-test to test for RFC correct padding/alignment test: patch scapy to not incorrectly pad ccm, ctr, gcm modes as well - Scapy is also incorrectly using the AES block size of 16 to pad CCM, CTR, and GCM cipher modes. A bug report has been opened with the and acknowledged with the upstream scapy project as well: https://github.com/secdev/scapy/issues/2322 Ticket: VPP-1928 Type: fix Signed-off-by: Christian Hopps <chopps@labn.net> Change-Id: Iaa4d6a325a2e99fdcb2c375a3395bcfe7947770e
2020-09-04vpp: Fix node APIsNathan Skrzypczak1-1/+1
Type: fix Change-Id: Ic6e2b7e05b50945a8e2222019c2942a6ee52e465 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2020-09-02bonding: add bond_create2 API to include gso optionSteven Luong2-16/+26
gso option is available for the debug CLI version of bond create. This patch is to create a new API to have the corresponding option in the binary API. The old binary API bond_create is marked deprecated. Type: improvement Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Id9501b8e6d267ae09e2b411957f181343da459c0