Age | Commit message (Collapse) | Author | Files | Lines |
|
Add safeguards when tracing packets to avoid cases where clear trace
was issue while buffers were held in reassembly.
Type: fix
Change-Id: I1bdd1e629e8bc08ce63913fd3c4b2327e47dec04
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Add a couple of tests to check l2bd learn limit behaviour
Type: test
Signed-off-by: Jerome Tollet <jtollet@cisco.com>
Change-Id: Iee16c81e5bb41066e3d6446d0e6ea4f389241270
|
|
Add assertions to verify correct ethernet type field in ARP test case.
Type: test
Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net>
Change-Id: I1d2671b0ab2b4dcb53dab4b54bf93578d6bc86a3
|
|
The Centos-7 compiler had problems with vapi_cpp_test.cpp.
The Centos-8 compiler does not. This change adds back the test.
==============================================================================
VAPI test
==============================================================================
run C VAPI tests 1.55 OK
run C++ VAPI tests 0.44 OK
==============================================================================
TEST RESULTS:
Scheduled tests: 2
Executed tests: 2
Passed tests: 2
==============================================================================
Type: test
Change-Id: Ic6a655ae99eb3ba0e73b7feef4436a0ca5fd92be
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: feature
Use the FIB to provide SAS (in so far as it is today)
- Use the glean adjacency as the record of the connected prefixes
= there's a glean per-{interface, protocol, connected-prefix}
- Keep the glean up to date with whatever the recieve host prefix is
(since it can change)
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: I0f3dd1edb1f3fc965af1c7c586709028eb9cdeac
|
|
Type: refactor
Change-Id: I9096e3b473110350e1e8e5936e3c4c164f8969a7
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: test
Change-Id: I39afe56a085648d881a18c7eafcf7caf2f375f31
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Move ForeignAddressFactory back to test_lisp.
It is the only test that uses the code and has
embedded addresses specific to the test.
Type: test
Change-Id: If1a39f9b167e36dd7aff7481350ddb8fe17155d2
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: test
Change-Id: Idb6b8169845e0239e639429ccfd02a683212b7e6
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Fix a typo in numbered list in the documentation. Also mention
possibility of using TEST= to run a specific test.
Type: fix
Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net>
Change-Id: I026703af014493afb3dea2d9ad99a7bb510b135d
|
|
the aenum library was used to provide intflag functionality
for python versions earlier than 3.6
Type: test
Change-Id: I914d390ee5364f337006c1c59abafe4b9a3c1bde
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
make it easier to detect logical mistakes.
Type: test
Change-Id: I853748ffaeebc545c8d31299f0d105405ad80bba
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: refactor
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I1bf53c2554e6b313467f618717698ed158db9065
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
- Unversioned python shebang lines may cause
mixed python 2.7 and python 3 execution in
make test.
Type: fix
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: Ia82c37be33902718c48878378b8343eedb76c2c8
|
|
Type: test
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I6fc907ba923581540380bc9b456b5183fc100775
|
|
Change "elog trace" to "event-logger trace"; corresponding change in
test/test_vlib.py, verified that the vlib test vectors still pass even
though they're not run on a regular basis ("make GCOV_TESTS=yes
TEST=test_vlib ...")
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Idee4aa036573865e071a9bab87e27fb5d53b4933
|
|
Type: fix
also cleanup any tracking at delete
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Id1037920c88c63e2029384af931064c00ed497aa
|
|
Type: fix
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I1922463683201215933e9f85b587d7c7123f3bfd
|
|
Type: fix
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: I9952497a108bac26445af95c28d4eed46099c2fc
|
|
Type: refactor
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I5052fc1fd82b5d17c1ed66fee5185addf60b9eb6
|
|
Type: refactor
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I916a386af48fd558b4749e206b2bc4b82a888512
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: test
must have been disabled when another test of the same name was added
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I108582a68cc3ac81c03ab641f562ff22947baf30
|
|
Type: improvement
Change-Id: Ica5f395075677bda5f38d28e704f65350af88610
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- Refactor make test code to be co-located with
the vpp feature source code
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I089bda44c31cbb217132e5b385cd9ea96ea5239e
|
|
- Refactor make test code to be co-located with
the vpp feature source code.
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: Ibae85a18df0d5a53e2a59c678a2a27499f54ce6d
|
|
- Refactor make test code to be co-located with
the vpp feature source code
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: Ic42bbd4e13606a5fdc91143ecc6452102ec337fe
|
|
- Refactor make test code to be co-located with
the vpp feature source code
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I4fa716778712ebfb1b136df98775345372d3dfad
|
|
- Refactor make test code to be co-located with
the vpp feature source code
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: Id9c5bf2cd01b6c1fd1750b4978d01597ee3bbf53
|
|
- Refactor make test code to be co-located with
the vpp feature source code
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: Ic27fb8c476cfd95879dec645c3c0cd6db341ee00
|
|
- Refactor make test code to be co-located with
the vpp feature source code.
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: Id3f856d9c8de1695edd5b968b8acfa2b382a0139
|
|
- Refactor make test code to be co-located with
the vpp feature source code.
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I0133a00def595fe1c08ab881633ef9f89148a286
|
|
When a 'del' is used to delete a classify table, only the
mask is needed to locate the table. Any match vector is
unneeded. The tests failed to notice this, but if the
test is run by hand in vppctl, it issues a parse error.
Fix the test so that it doesn't supply irrelevant data.
Fix the CLI processing to read always complete newline
terminated line of input instead. This allows unneeded
CLI parameters to be ignored. It also necessitated
fixing a trace test which had then erroneously split
a single CLI command over multiple lines.
While in the area, fix a latent bug on table matching
where a test for compatible mask vector sizes were
not matching impedance properly (byte vs ux32x4).
Type: fix
Signed-off-by: Jon Loeliger <jdl@netgate.com>
Change-Id: I1177ab1dd417f3d11f30eecbaa2b0fb1015c3ab5
|
|
Type: feature
- use tunnel_encap_decap_flags to control the copying of DSCP/ECN/etc
during IPSEC tunnel mode encap.
- use DSCP value to have fixed encap value.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: If4f51fd4c1dcbb0422aac9bd078e5c14af5bf11f
|
|
Type: feature
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Iae9fe35cfbce4c675fa25e0800c0f4629a83e012
|
|
Type: fix
This is not an API change, it's the same values, just a different named
type.
also use VppEnum values in tests
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I3a18b529514f3cc9467ae4e8ac3e88d067fc776b
|
|
Type: make
Change-Id: Ifb3e52af93d24fcc2f2e6a0c408e16902a2fe553
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- use user instance number in interface name
Restore the behavior of previous versions where the IPsec tunnel
interface name contained the value of the user-provided instance number.
For example, a command similar to
create ipsec tunnel local-ip . . . instance 5
would result in the creation of interface "ipsec5".
- ipsec: delete tunnel protection when asked
The "ipsec tunnel protect" command will parse a "del" argument but does
not undo the tunnel protection, leaving the SAs hanging around with
reference counts that were incremented by a previous invocation of the
command. Allow the tunnel protection to be deleted and also update the
help text to indicate that deletion is an option.
- test: ipsec: add test for ipsec interface instance
Also cleanup (unconfig) after TestIpsecItf4 NULL algo test.
Type: fix
Fixes: dd4ccf2623b5 ("ipsec: Dedicated IPSec interface type")
Signed-off-by: Eric Kinzie <ekinzie@labn.net>
Signed-off-by: Christian Hopps <chopps@labn.net>
Change-Id: Idb59ceafa0633040344473c9942b6536e3d941ce
|
|
Type: fix
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I9eff41407b0f172f2b567e6a4ea1c48be8df883a
|
|
Type: test
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Id07e8981a903f11f50fb494a93d01815382025e4
|
|
Type: improvement
on the dedicated IPSec interface, the SA describes the peer, so it is
not possible to forward to a peer for which there is no SA. Therefore if
an SA is added with NULL auth and integ then this explicitly states that
this is what the peer desires.
on the contrary on the IP-IP/GRE interface, in the absence of protection
and an SA, then the traffic is sent in the clear. So adding NULL
auth/crypto iSA is a means to describe that the peer should not be sent
traffic.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I7ad2d466cc74eb7ff8c4c84e0d7897d06e2fcf86
|
|
Type: fix
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ic6c76b65e2dcc08916373153944507a297c962c0
|
|
The Python VPP Stats module also used the VPP heap.
Fix so it now explicitly allocates a heap.
Fixes: f68fccfe7e188fec2c9f91da38ca9acf6f67d811
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I0bd4ae64d6c89cdf634d8d9a91c23ab38017c5cc
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Ticket: VPP-1918
Type: improvement
Change-Id: I2bc3e30121697404dcd54f1c2127bd85ccc1029e
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: refactor
Change-Id: I54df533a8f863c4e49742903cf2457f18b4fc506
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: refactor
Change-Id: I613bf4d6517591351b212bfe6c8d93abf235f5dc
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: refactor
Change-Id: Ifb36eeb146b87e9e305881429d32d6879e955e1e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- VPP on opensuse has not been supported
for several releases.
Type: fix
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I2b5316ad5c20a843b8936f4ceb473f932a5338d9
|
|
Type: fix
Change-Id: I6fdc4e952097e92ac3aa53e0be3ef99e0d801b28
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
The main information about plugin you can see in README.md
vpp# wireguard ?
wireguard create wireguard create listen-port <port> private-key <key> src <IP> [generate-key]
wireguard delete wireguard delete <interface>
wireguard peer add wireguard peer add <wg_int> public-key <pub_key_other>endpoint <ip4_dst> allowed-ip <prefix>dst-port [port_dst] persistent-keepalive [keepalive_interval]
wireguard peer remove wireguard peer remove <index>
Change-Id: I85eb0bfc033ccfb2045696398d8a108b1c64b8d9
Signed-off-by: Artem Glazychev <artem.glazychev@xored.com>
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Jim Thompson <jim@netgate.com>
Signed-off-by: Neale Ranns <nranns@cisco.com>
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Not all ESP crypto algorithms require padding/alignment to be the same
as AES block/IV size. CCM, CTR and GCM all have no padding/alignment
requirements, and the RFCs indicate that no padding (beyond ESPs 4 octet
alignment requirement) should be used unless TFC (traffic flow
confidentiality) has been requested.
CTR: https://tools.ietf.org/html/rfc3686#section-3.2
GCM: https://tools.ietf.org/html/rfc4106#section-3.2
CCM: https://tools.ietf.org/html/rfc4309#section-3.2
- VPP is incorrectly using the IV/AES block size to pad CTR and GCM.
These modes do not require padding (beyond ESPs 4 octet requirement), as
a result packets will have unnecessary padding, which will waste
bandwidth at least and possibly fail certain network configurations that
have finely tuned MTU configurations at worst.
Fix this as well as changing the field names from ".*block_size" to
".*block_align" to better represent their actual (and only) use. Rename
"block_sz" in esp_encrypt to "esp_align" and set it correctly as well.
test: ipsec: Add unit-test to test for RFC correct padding/alignment
test: patch scapy to not incorrectly pad ccm, ctr, gcm modes as well
- Scapy is also incorrectly using the AES block size of 16 to pad CCM,
CTR, and GCM cipher modes. A bug report has been opened with the
and acknowledged with the upstream scapy project as well:
https://github.com/secdev/scapy/issues/2322
Ticket: VPP-1928
Type: fix
Signed-off-by: Christian Hopps <chopps@labn.net>
Change-Id: Iaa4d6a325a2e99fdcb2c375a3395bcfe7947770e
|