aboutsummaryrefslogtreecommitdiffstats
path: root/test
AgeCommit message (Collapse)AuthorFilesLines
2021-03-25tests: introduce test-checkstyle-diffKlement Sekera1-2/+17
Make test-checkstyle-diff is a new target which checks PEP8 compliance only for changed files. This makes it faster to execute and also more readable as most of the time, only changed files will fail. Type: improvement Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I71baca76ab3a21a7a3790617cbfb0d48aacbd9ec
2021-03-25stats: python vpp_stats rewrite to access stat segment directlyOle Troan6-106/+59
This module implement Python access to the VPP statistics segment. It accesses the data structures directly in shared memory. VPP uses optimistic locking, so data structures may change underneath us while we are reading. Data is copied out and it's important to spend as little time as possible "holding the lock". Counters are stored in VPP as a two dimensional array. Index by thread and index (typically sw_if_index). Simple counters count only packets, Combined counters count packets and octets. Counters can be accessed in either dimension. stat['/if/rx'] - returns 2D lists stat['/if/rx'][0] - returns counters for all interfaces for thread 0 stat['/if/rx'][0][1] - returns counter for interface 1 on thread 0 stat['/if/rx'][0][1]['packets'] - returns the packet counter for interface 1 on thread 0 stat['/if/rx'][:, 1] - returns the counters for interface 1 on all threads stat['/if/rx'][:, 1].packets() - returns the packet counters for interface 1 on all threads stat['/if/rx'][:, 1].sum_packets() - returns the sum of packet counters for interface 1 on all threads stat['/if/rx-miss'][:, 1].sum() - returns the sum of packet counters for interface 1 on all threads for simple counters Type: refactor Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I1fe7f7c7d11378d06be8276db5e1900ecdb8f515 Signed-off-by: Ole Troan <ot@cisco.com>
2021-03-24tests: add vpp test dirs to PYTHONPATHDave Wallace1-4/+10
- Required to relocate test infra modules to be co-located in feature test directory. - Remove/regenerate build-root/build-test/src/ soft links when running make test to allow re-running 'make test' after moving source files. - Suppress annoying 'ls' error message when gathering test source files caused by 'c' test application directory being named 'test'. - Use PYTHONPYCACHEPREFIX to generate all compiled source under build-root/build-test. This only works for python 3.8 or greater, but existing 'make test-wipe' target cleans up in-situ __pycache__ directories for older python versions. Type: fix Change-Id: If3c3ff0c58fb26a17395babc34783e06b1dd84e7 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2021-03-20tests: add support for worker awarenessKlement Sekera8-54/+59
VppTestCase now has vpp_worker_count property set to number of workers. This can be overriden by child classes. Also overriden by VPP_WORKER_CONFIG variable for legacy reasons. Type: improvement Change-Id: Ic328bacb9003ddf9e92815767653bd362aa7f086 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2021-03-18tests: remove shm files created by vpp on resetKlement Sekera1-0/+1
Even though we don't use shm transport anymore, vpp still populates shm. Add cleanup before running tests to avoid the nuisance of running out of space on /dev/shm. Type: fix Fixes: eb506becd038f081bc7ac340412d3685425bb8b4 Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I2ef87e991223ee60892d56af1482025d91e77d46
2021-03-17tests: remove shm handlingKlement Sekera3-49/+4
Not used anymore with socket transport. Type: improvement Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I7061048dee21ce02637e34f73fb9984bd241f7df
2021-03-16fib: Allow the creation of new source on the APINeale Ranns3-2/+217
Type: feature an client can dump the existing sources, examine their priorities, then define thier own source. Usefull if a client wants to distingusih between say, static, ospf, bgp, etc routes it has added over the API. Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Alexander Chernavin <achernavin@netgate.com> Change-Id: I5158b4fa1ebe87381ff8707bb173217f56ea274a
2021-03-15tests: use socket transport instead of shared memoryOle Troan4-51/+49
Type: improvement Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I9e65c94a5a05047a5104e9361ea36eac77b40442 Signed-off-by: Ole Troan <ot@cisco.com>
2021-03-15tests: fix NoneType printing if VPP died earlyKlement Sekera1-12/+15
Make error message more meaningful. Type: fix Change-Id: I3c49cb179c3ee7a59657b3ae9a06311f57dc52ac Signed-off-by: Klement Sekera <ksekera@cisco.com>
2021-03-05tests: improve the robustness of process cleanup on INT/TERM signalsAndrew Yourtchenko1-1/+17
Change-Id: I3049d3d7d1212236dcc63ebf5560f87561928520 Type: improvement Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2021-03-05ipsec: Support async mode per-SANeale Ranns1-39/+165
Type: feature This feautre only applies to ESP not AH SAs. As well as the gobal switch for ayncs mode, allow individual SAs to be async. If global async is on, all SAs are async. If global async mode is off, then if then an SA can be individually set to async. This preserves the global switch behaviour. the stratergy in the esp encrypt.decrypt nodes is to separate the frame into, 1) sync buffers, 2) async buffers and 3) no-op buffers. Sync buffer will undergo a cyrpto/ath operation, no-op will not, they are dropped or handed-off. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ifc15b10b870b19413ad030ce7f92ed56275d6791
2021-03-05ipsec: Submit fuller async framesNeale Ranns2-0/+85
Type: improvement In the current scheme an async frame is submitted each time the crypto op changes. thus happens each time a different SA is used and thus potentially many times per-node. thi can lead to the submision of many partially filled frames. change the scheme to construct as many full frames as possible in the node and submit them all at the end. the frame owner ship is passed to the user so that there can be more than one open frame per-op at any given time. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ic2305581d7b5aa26133f52115e0cd28ba956ed55
2021-03-04hsa: fix builtin echo apps with multiple workersFlorin Coras1-2/+0
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I9507b5a9755e938b4d1da657bed3a8681a056427
2021-03-02classify: fix multiple filters supportBenoît Ganne2-56/+56
This fix the classify filter if we attach several different filters. This also fix some issues with l3 and l4 parsing. Type: fix Change-Id: I9dc6c55049a3bbc0110d1097b40d9da27633626b Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-02-25tests: Add tests for IPSec async mode using the crypto SW schedulerNeale Ranns4-107/+189
Type: test Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Iabc8f2b09ee10a82aacebd36acfe8648cf69b7d7
2021-02-25ipsec: enable input features on tunnelsBrian Russell2-0/+242
Make the ipsec[46]-tun-input nodes siblings of device-input so that input features can be enabled on them. Register ipsec-tun for feature updates. When a feature is enabled on the device-input arc and the ifindex is an IPSec tunnel, change the end node of the arc for that ifindex to be the appropriate ESP decrypt node. Set a flag on the tunnel to indicate that the feature arc should be started for packets input on the tunnel. Test input policing on ESP IPSec tunnels. Type: improvement Signed-off-by: Brian Russell <brian@graphiant.com> Change-Id: I3b9f047e5e737f3ea4c58fc82cd3c15700b6f9f7
2021-02-24fib: fix sa selection for fib routed destinationsJúlius Milan1-1/+25
The move from ip4(6)_src_address_for_packet to fib_sas4(6)_get changed the behavior, so that the new looked only to adjacent gleans. This caused a problem for destinations routed according to FIB table. To reproduce: vpp# create tap vpp# set interface state tap0 up vpp# set interface ip address tap0 192.168.11.1/24 vpp# ip route add 192.168.20.0/24 via 192.168.11.2 linux$ sudo ip addr add 192.168.20.1/24 dev lo linux$ sudo ip link set tap0 up linux$ sudo ip addr add 192.168.11.2/24 dev tap0 vpp# ping 192.168.20.1 Failed: no source address for egress interface Type: fix Signed-off-by: Július Milan <julius.milan@pantheon.tech> Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I22899f4dbbf8c1c85ccce72f801b92c183195b5d
2021-02-23misc: run make test-refresh-deps to update the python dependenciesAndrew Yourtchenko2-138/+152
Also, remove the flake8 from requirements.txt as it looks like upstream package is not installable... Type: test Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> Change-Id: I1a2132f30f7f9431d892e962a29c7d859e6a43db Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2021-02-23tests: delete test/requirements-2.txtAndrew Yourtchenko1-316/+0
Python2 has not been supported for a while now, time to spring clean... Change-Id: Iafb18bd730c69b5aeefa6ccbfadbaaf30c92c2c8 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> Type: improvement
2021-02-19tests: test input policerBrian Russell1-0/+4
Apply a policer to an interface, check it's policing packets. Remove it and check it no longer polices packets. Type: test Signed-off-by: Brian Russell <brian@graphiant.com> Change-Id: I6f694c8a9804cadf010b5831770aaae81f42e027
2021-02-15vlib: refactor checksum offload supportMohsin Kazmi2-2/+4
Type: refactor This patch refactors the offload flags in vlib_buffer_t. There are two main reasons behind this refactoring. First, offload flags are insufficient to represent outer and inner headers offloads. Second, room for these flags in first cacheline of vlib_buffer_t is also limited. This patch introduces a generic offload flag in first cacheline. And detailed offload flags in 2nd cacheline of the structure for performance optimization. Change-Id: Icc363a142fb9208ec7113ab5bbfc8230181f6004 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2021-02-15tests: fix import in test/test_pcap.pyPaul Vinciguerra1-4/+5
Type: test Change-Id: Ib9192a12812b40090a0859cb73288aea27a3ca01 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2021-02-15ip: Path MTUNeale Ranns3-2/+449
Type: feature Support setting the MTU for a peer on an interface. The minimum value of the path and interface MTU is used at forwarding time. the path MTU is specified for a given peer, by address and table-ID. In the forwarding plane the MTU is enfored either: 1 - if the peer is attached, then the MTU is set on the peer's adjacency 2 - if the peer is not attached, it is remote, then a DPO is added to the peer's FIB entry to perform the necessary fragmentation. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I8b9ea6a07868b50e97e2561f18d9335407dea7ae
2021-02-15tests: test punt policer bound to worker threadBrian Russell3-2/+93
Add to the IP[46] punt policer handoff tests by binding the policer to a particular worker and checking all packets are policed on that thread. Type: test Signed-off-by: Brian Russell <brian@graphiant.com> Change-Id: I7fab28659ccb65f13f841cec65a3f808281b3f90
2021-02-15tests: explicitly close subprocess filesPaul Vinciguerra1-0/+2
Resolve the following error: /vpp/test/framework.py:657: ResourceWarning: unclosed file <_io.BufferedReader name=6> del cls.vpp Object allocated at (most recent call last): File "/usr/lib/python3.8/subprocess.py", lineno 844 self.stdout = io.open(c2pread, 'rb', bufsize) Type: test Change-Id: Ia2974da594f0582dcff1f4bdf40d25475769c46c Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2021-02-11tests: tag the tests that do not work with multi-worker configurationAndrew Yourtchenko10-0/+30
If the multi-worker default VPP configuration is triggered by setting VPP_WORKER_CONFIG="workers 2", some of the tests fail for various reasons. It's a substantial number, so this change marks all of the testsets that have this issue, such that they can be addressed later independently. Type: test Change-Id: I4f77196499edef3300afe7eabef9cbff91f794d3 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2021-02-10ipsec: Use the new tunnel API types to add flow label and TTL copyNeale Ranns5-34/+85
support Type: feature attmpet 2. this includes changes in ah_encrypt that don't use uninitialised memory when doing tunnel mode fixups. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ie3cb776f5c415c93b8a5ee22f22586fd0181110d
2021-02-10nat: fix EI hairpinning thread safetyKlement Sekera1-0/+2
Avoid doing inter-thread reads without locks by doing a handoff before destination address rewrite. Destination address is read from a session which is possibly owned by a different thread. By splitting the work in two parts with a handoff in the middle, we can do both in a thread safe way. Type: improvement Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I1c50d188393a610f5564fa230c75771a8065f273
2021-02-09Revert "ipsec: Use the new tunnel API types to add flow label and TTL copy"Matthew Smith5-85/+34
This reverts commit c7eaa711f3e25580687df0618e9ca80d3dc85e5f. Reason for revert: The jenkins job named 'vpp-merge-master-ubuntu1804-x86_64' had 2 IPv6 AH tests fail after the change was merged. Those 2 tests also failed the next time that job ran after an unrelated change was merged. Change-Id: I0e2c3ee895114029066c82624e79807af575b6c0 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2021-02-08ipsec: Use the new tunnel API types to add flow label and TTL copyNeale Ranns5-34/+85
support Type: feature Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I6d4a9b187daa725d4b2cbb66e11616802d44d2d3
2021-02-08tests: allow for externally supplied VPP workers config for testsAndrew Yourtchenko2-1/+26
Allow to supply the external VPP worker config for tests which do not specify the workers config explicitly, and use the tags infra to flag those that need attention in this configuration. This commit shows one example use of such a tag, there will be a separate commit with the rest of the places needing it, since that change is rather mechanical. Thus, the assumption is that the test should by default be agnostic of the VPP configuration, unless it explicitly specifies so. Type: test Change-Id: I3c0077e4e22a75cb9561fb98d3b783b93486b2be Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2021-02-05ipsec: add support for AES CTRBenoît Ganne2-3/+139
Type: feature Change-Id: I9f7742cb12ce30592b0b022c314b71c81fa7223a Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-02-05vxlan: add udp-port configuration supportArtem Glazychev3-46/+244
Type: improvement Signed-off-by: Artem Glazychev <artem.glazychev@xored.com> Change-Id: Ie30d51ab4df5599b52f7335f863b930cd69dbdc1
2021-02-02tests: verify policer stats in punt testsBrian Russell3-0/+72
Add verification of policer stats in the IP[46] punt paths. Type: test Signed-off-by: Brian Russell <brian@graphiant.com> Change-Id: I8b1035afc2d3abe4e98bdb3a76e87a0dd131ef4b
2021-01-28tests: add ip6 punt policer handoff testBrian Russell1-1/+52
Add a test for ip6 punt policer thread handoff. A child class is created that uses common punt test setup but is configured to have 2 worker threads. Type: test Signed-off-by: Brian Russell <brian@graphiant.com> Change-Id: I65c44f5d79455129accd7cf405c15920a5a9b678
2021-01-28tests: move ip6 punt setup to its own classBrian Russell1-23/+24
Move interface and packet setup for the ip6 punt test to its own class so that child classes can be created that use it. Type: test Signed-off-by: Brian Russell <brian@graphiant.com> Change-Id: I14acedc1bcd12cb320835a36833cd32303c5f793
2021-01-28tests: add ip4 punt policer handoff testBrian Russell1-1/+51
Add a test for ip4 punt policer thread handoff. A child class is created that uses common punt test setup but is configured to have 2 worker threads. Type: test Signed-off-by: Brian Russell <brian@graphiant.com> Change-Id: I34defee85bc5636f9355d0b9aaa007bfaf5e001e
2021-01-28tests: move ip4 punt setup to its own classBrian Russell1-28/+29
Move interface and packet setup for the ip4 punt test to its own class so that child classes can be created that use it. Type: test Signed-off-by: Brian Russell <brian@graphiant.com> Change-Id: I1a976e8fc0e8a44a86fe923a3ae093fe0c9057a8
2021-01-28ip: Router ID included in flow hashNeale Ranns2-18/+57
Type: feature A device/router needs to have a unique ID which is included in the flow has so that flows are not polarised through the network, i.e. each deice in the network chooses the same nth link for the same flow. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I963e03674adbb085902b4084fdc4886b88f5734c
2021-01-22tests: add generalized tags for tests, use them for run-solo testsAndrew Yourtchenko5-18/+39
We have accumulated several scenarios in prod or wishlists where it would be useful to have a general infra to say yes/no about a certain test, and potentially make decisions based on that, for example: - runs solo (aka 'time-dependent') - (wishlist) part of quick smoke-test set - (wishlist) intermittent failure unrelated to timing - (wishlist) test broken with a multi-worker config in vpp Refactor the current "run-solo" code to allow for this extension. Type: test Change-Id: Ia5b3810e57c0543753c8e0dc4dc0cfb4a30b36ac Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> Signed-off-by: Klement Sekera <ksekera@cisco.com>
2021-01-21ip: use IPv6 flowlabel in flow hash computationAhmed Abdelsalam3-7/+14
extends ip6_compute_flow_hash() to include IPv6 flowlabel in flowhash computation Type: improvement Signed-off-by: Ahmed Abdelsalam <ahabdels@cisco.com> Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: Id1aaa20c9dac729c22b714eea1cdd6e9e4d1f75e
2021-01-20tests: do not skip solo-run tests if running within a single job and all ↵Andrew Yourtchenko1-8/+7
remaining tests are solo-run There was a logic error, which results in not running solo tests if TEST_JOBS=1, and we have finished running the regular test and the remaining tests are all solo-run. They all get put into that pile, but the new runners never start. Solution: check the pile of solo-run jobs unconditionally. Thanks to Klement Sekera for spotting the issue. Type: fix Change-Id: Iaecacbe4de44050cd8d0ff2d524559df99f2bae4 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2021-01-20ip: add IPv6 ping test for link-layer addressBenoît Ganne3-44/+45
Type: improvement Change-Id: I9f60e29462c7cb193a8594b7de06418b40573103 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-01-20ip: add API to retrieve IPv6 link-layer addressBenoît Ganne1-2/+5
Type: feature Change-Id: I5739869490155b0b9674b4faf61882d97e66a4ed Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-01-18ipsec: Support MPLS over IPSec[46] interfaceNeale Ranns2-18/+190
Type: feature Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I89dc3815eabfee135cd5b3c910dea5e2e2ef1333
2021-01-14vxlan: Protect against tunnel config where source is not localNeale Ranns1-0/+48
Type: fix If a tunnel's source is not local then post encap VPP will attempt to receive (via ip4-local) that packet, things go wrong from there. The fix is when stacking the encap forwarding don't accept a receive DPO. This approach is taken, rather than rejecting bad tunnels, because the 'local-ness' of the tunnel's source can change and we can't reject tunnels that were once correctly configured but are no longer. the user will quickly discover their mistake as traffic won't pass. Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I46198422e321606e8baba003112e978a526b4c2f
2021-01-09l2: fix tests for learn_limitJerome Tollet3-58/+236
Type: fix Signed-off-by: Jerome Tollet <jtollet@cisco.com> Change-Id: I7cbbea2205ca7249ba19020b25c8657b42e09562
2021-01-08l2: Separating scan-delay and learn-limit into a separate API from ↵Jerome Tollet2-0/+53
want_l2_macs_events Type: feature Signed-off-by: Jerome Tollet <jtollet@cisco.com> Change-Id: I6de6dae7da4ec1001e2811975a9b67acfc1a148c
2021-01-08tests: move bond tests to src/vnet/bonding/testDave Wallace2-373/+0
- Refactor make test code to be co-located with the vpp feature source code. Type: test Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I056717261553f6449f5fcd3611b6ae3895a00ba6
2021-01-08l2: fix l2 bd_learnlimitJerome Tollet1-6/+1
Type: fix Signed-off-by: Jerome Tollet <jtollet@cisco.com> Change-Id: I86bc9a461660f3f71e06f88ab65004ec3d763b88