| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Type: test
Change-Id: I022a3435429976590b8e8e2e1abe924188d1c3f9
Signed-off-by: Matus Fabian <matfabia@cisco.com>
(cherry picked from commit f95c4d81fcffd15fe2e7af690f8294e7e04d8868)
|
|
Also rework the logic so the skipping of marked Ubuntu 22.04 occurs at framework level
Leave debian11 special cases as-is.
Type: fix
Change-Id: I481eb32cd1a0860935482e9f930ced409da653c9
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
(cherry picked from commit 9987d470a6a502dd64266204cb006f30d7245cdd)
|
|
When the NIC does not support mac filter, we rely on ethernet-input
node to do the destination mac check, ie, when the interface is in L3,
the mac address for the packet must be the mac address of the
interface where the packet arrives. This works fine in ethernet-input
node when all packets in the frame might have different interfaces, ie,
ETH_INPUT_FRAME_F_SINGLE_SW_IF_ID is not set in the frame. However,
when all packets are having the same interface,
ETH_INPUT_FRAME_F_SINGLE_SW_IF_ID is set, ethernet-input node goes
through the optimized routine eth_input_single_int -> eth_input_process_frame.
That is where dmac check has a bug when all packets in the frame are
either, ip4, ip6, or mpls without vlan tags. Because without vlan tags,
the code handles all packets in fast path and ignores dmac check.
With vlan tags, the code goes to slow path where dmac check is handled
properly.
The fix is to check if we have a bad dmac in the fast path and force the
code to go to slow path which will handle dmac check properly.
Also do a wholesale correction on all the testcases which do not use
the proper dmac when sending L3 packets.
Type: fix
Change-Id: I73153a805cecdc24c4eefcc781676de04737ae2c
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
This reverts commit 71c32a898941e32b5d4f865b50fbe775560c582d.
Type: fix
Reason for revert: vnet pinning is not considered in this patch.
This causes keywords 'workers' and 'skip-cores' to be broken,
as well as keyword 'main-core auto' introduced in this patch.
If this patch is ever reconsidered, it must account for vnet
pinning fix in commit https://gerrit.fd.io/r/c/vpp/+/40711.
Change-Id: I1f3154a6c7e830b100f824375aa00e95b192f7f3
Signed-off-by: hsandid <halsandi@cisco.com>
|
|
Type: improvement
Change-Id: I955fbef0e0238cb69307e96cd1c677061737e5f3
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Change-Id: I4105109c1c659190fc2da4ee1802ef53449a3c15
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
|
|
Type: refactor
Change-Id: I4abbc77a447358f4beaa05505299cae732a3f374
Signed-off-by: Maxime Peim <mpeim@cisco.com>
|
|
After adding a path to the default route, the prefix still be there
in the table as it is a mandatory prefix. However, the registry hence
fail to remove the route from VPP.
Type: fix
Change-Id: Ic4ad72455ac7a1a2f1d8baba59a7a3afe1610726
Signed-off-by: Maxime Peim <mpeim@cisco.com>
|
|
Type: test
Change-Id: Ibceabc411f09d80cc23be6f2e7c8abd56d4c4ac2
Signed-off-by: adrianvillin <avillin@cisco.com>
|
|
In case of multiple path within tunnel, mpls lookup node
computes lb hash with mpls_compute_flow_hash config value 0,
so only mpls label and l4 ports gets accounted, not 5-tuple.
This leads to flow traffic polarization and disbalance over
mpls paths.
Use mpls hash config from lb instead, usually it'll be
MPLS_FLOw_HASH_DEFAULT with 5-tuple plus flowlabel.
As optimization, fix flow hash reuse from the previous lookup
node if present, like ip_lookup does. Previously mpls lookup
always calcs the hash.
Test lb distribution for both cases.
Also, use the same flow hash hex format in ip4/ip6 and mpls
traces for easier reading, most code changes is due fixstyle
formatting.
Type: fix
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
Change-Id: Ib89e1ab3edec14269866fe825a3e887d6c817b7c
|
|
On unnumbered interfaces, ARP fails because there is no attached route.
Allow replies to peer-to-peer addresses on unnumbered interfaces:
eg. 192.0.2.1/32 <-> 192.0.2.2/32
Type: fix
Change-Id: Ibeb8d8ebc8d58d5bfb0724739a17694e0217356e
Signed-off-by: Pim van Pelt <pim@ipng.nl>
|
|
Type: test
Change-Id: I01500466f3d15c79e38028677ce7e5c75d427fdc
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
In run_in_venv_with_cleanup.sh, sed was changed to gsed to allow the
script to run properly on FreeBSD because the sed script uses an
expression that is specific to the gnu sed. Gnu sed is available to
be invoked as gsed on FreeBSD systems, but there is no executable or
symlink which allows sed to be run by the name gsed on ubuntu 22.04.
Check for the existence of gsed. If it's found, use it. Otherwise, just
use sed.
Type: fix
Fixes: b3c863eae4
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Change-Id: I487197e486f500711aa3e87ec7ba899a53606b40
|
|
Type: improvement
Change-Id: Ie79fd8a5bcfd72a97bf460ef6437913ac34f439c
Signed-off-by: Tom Jones <thj@freebsd.org>
|
|
Type: fix
Change-Id: I646f96517d3bda5c0f5644e6bb89ade7818fc466
Signed-off-by: Tom Jones <thj@freebsd.org>
|
|
l2 tunnels like vxlan, gtpu, geneva use vnet_l2_compute_flow_hash() to
compute flow hash for udp src port entropy. In case of inner mpls tunnels
to the same lsr ethernet src and dst macs are the same, so l2 flow hash
is also the same leading to no src port entropy and the only rss queue
overflow on receiver side.
Fix it for all the possible vnet_l2_compute_flow_hash callers by making
mpls playload hash in additon to ip4/ip6. Visible performance impact is
not expected as it's only one check for mpls ethertype for common cases.
Type: fix
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
Change-Id: I69153d42fb3d7c094a670c674fac8d14039c626a
|
|
Type: feature
Auto core pinning now fetches vpp cpu affinity list
using pthread api. This enables us to do core-pinning in
environments where the host cpu list does not necessarily align
with cpus available to vpp
Change-Id: Ife8c2a2351c08c5c6c4fdf7c729eeff2697bc39a
Signed-off-by: hsandid <halsandi@cisco.com>
|
|
Type: improvement
Change-Id: I960edc05a9a77eb55f67cb1ec01d2b3122298ef8
Signed-off-by: Tom Jones <thj@freebsd.org>
|
|
FreeBSD doesn't have an easy mechanism to discover CPU features
currently. For tests declare we don't support anything we are asked
about.
Add the FreeBSD spelling of amd64 while we are here.
Type: improvement
Change-Id: I3eb5db856ee5cbc71250e47eee619e2f620de33a
Signed-off-by: Tom Jones <thj@freebsd.org>
|
|
Type: fix
Change-Id: I957877d7a82dea437c072e493561894f11321aaf
Signed-off-by: Tom Jones <thj@freebsd.org>
|
|
For portability we use errno defines rather than explicit int values
when checking for errors.
Type: improvement
Change-Id: Ib5fc1db357da150d008d5a11bef5dbc7ec354cfb
Signed-off-by: Tom Jones <thj@freebsd.org>
|
|
The offload should be handled by gso node or by the NIC
if the latter has the relevant capabilities. But ip midchain
is missing the support for buffer offload metadata in case
of GSO packet.
This patch adds the relevant support to add the buffer metadata
if the packet is GSO/IPIP to be handled accordingly.
Type: improvement
Change-Id: I17f5d71bf4c5f43a85ca3f2fbebfa1426b42ef69
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
introduce ability to connect over unix socket instead of shared memory
Type: improvement
Change-Id: Id9042c74e33ad4e418896c4d7ae48bb9106195c9
Signed-off-by: Stanislav Zaikin <stanislav.zaikin@46labs.com>
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
|
|
Using unittest skip instead of print unclutters display by not printing
skip messages when not applicable, e.g. when somebody runs tests which
are unrelated to netns tests, e.g. with FILTER=vapi.
Type: fix
Fixes: e416893a59
Change-Id: Ie09e213249aa47da7e4ff484c3d072fbce3c2001
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
|
|
IPFIX buffers are stored on a per worker thread basis. Currently, the
flush callbacks will flush only buffers stored for the main thread. And
buffers for worker threads will not be sent until their size reach the
path MTU configured for the exporter. So if traffic is constant, the
problem will unlikely to be visible. Buffers will be sent once they
reach the maximum size. However, if traffic stops at some point and
flush is triggered in order to make the plugin send all currently
buffered data, this will not happen. And collectors will not receive
that data. The plugin will keep the remaining data until traffic starts
again, the buffers reach the maximum size, and be sent.
With this fix, flush buffers for worker threads and for the main thread
when the flush callbacks are triggered.
This will allow to remove @tag_fixme_vpp_workers from the unit tests
that don't set timers. The tests that set timers will still be failing
for other multi-worker related problems.
Type: fix
Change-Id: I9a7d9cef8ddbec7ee68c79309e48e7bc0953d488
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
- fix ICMPv6 lookup FIB (don't reset sw_if_index[VLIB_TX] to -1)
- add locally generated flag in ICMPv4 buffers (reflect ICMPv6)
Type: fix
Change-Id: If25a176a9952cbe185a030f8b136718af1bff9e8
Signed-off-by: Maxime Peim <mpeim@cisco.com>
|
|
BPF filter w/o optimization can take x2 - x3 more instructions,
causing significant slow down in fast path.
Enable pcap optimization by default via cli and introduce api v2
with pcap optimization control, keep v1 for a while as it exists
in previous release already.
Intriduce bpf filter cli dump, similar to tcpdump -d.
Also fix memleak, function name typo, cli pcap format hint and
add related tests.
Type: improvement
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
Change-Id: I92b2b519e92326f1b8e1a4dda6a3e3edc52f87ad
|
|
Fix crash while adding intf-rx ip4 and ip6 routes via api due
invalid exporting of interface rx routes as attached.
Also, add missed route path via rx-ip6 cli support.
Type: fix
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
Change-Id: I15711c8c0787398dd7e3baa4787019bb1f317666
|
|
In esp_encrypt_inline(), if two or more consecutive packets are
associated with the same SA which has no crypto or integrity algorithms
set, only the first one gets dropped. Subsequent packets either get sent
(synchronous crypto) or cause a segv (asynchronous crypto).
The current SA's index and pool entry are cached before it can be
determined whether the packet should be dropped due to no algorithms
being set. The check for no algorithms is only performed when the cached
SA index is different than the SA index for the current packet. So
packets after the first one associated with the "none" alg SA aren't
handled properly.
This was broken by my previous commit ("ipsec: keep esp encrypt pointer
and index synced") which fixed a segv that occurred under a different
set of circumstances.
Check whether each packet should be dropped instead of only checking
when a new SA is encountered.
Update unit tests:
- Add a test for no algs on tunnel interface which enables
asynchronous crypto.
- Send more than one packet in the tests for no algs.
Type: fix
Fixes: dac9e566cd16fc375fff14280b37cb5135584fc6
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Change-Id: I69e951f22044051eb8557da187cb58f5535b54bf
|
|
Split virtual interface tests in VPP into smaller and modular
tests for testing various interface types and features.
Type: test
Change-Id: Ic38af88379f75eee3090679d411edbdc8fd5d2e5
Signed-off-by: Naveen Joy <najoy@cisco.com>
|
|
Type: improvement
Change-Id: Ide4b45da99e3a67376281f6438997f3148be08e5
Signed-off-by: Denys Haryachyy <garyachy@gmail.com>
|
|
RFC 7296 describes the way to rekey IKE SAs: to rekey an IKE SA,
establish a new equivalent IKE SA with the peer to whom the old
IKE SA is shared using a CREATE_CHILD_SA within the existing IKE
SA. An IKE SA so created inherits all of the original IKE SA's
Child SAs, and the new IKE SA is used for all control messages
needed to maintain those Child SAs.
Type: improvement
Signed-off-by: Atzm Watanabe <atzmism@gmail.com>
Change-Id: Icdf43b67c38bf183913a28a08a85236ba16343af
|
|
the error node is set to ip6_input in the inline funcition
associated with ip6_rewrite. Thus, error counters defined
for node ip6 rewrite are never used.
Type: fix
Change-Id: Id6bef633928b0fff9069498c2e39e9f5bea2cf9b
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
|
|
VPP requires GNU Make to build, on GNU systems (such as Debian), GNU
Make is installed as 'make', typically with a symlink from 'gmake'.
On other systems (such as FreeBSD), 'make' is a BSD Make derriviative
and GNU Make is installed a 'gmake'.
Use $(MAKE) variable for make calls from within Makefiles. This
variable is set to the path of the calling make program, i.e.,
/usr/local/bin/gmake on a bsd system.
This is the recommended way to call make from Makefiles in the GNU Make
documentation.
Type: improvement
Change-Id: Id9162a34a0f8358f22090718087918dae31c0fce
Signed-off-by: Tom Jones <thj@freebsd.org>
|
|
VPP requires bash for all shell scripts. Align shebang lines in build
and test scripts to look up the location of bash rather than hard coding
'/bin/bash'.
Look up the location of bash for makefiles.
Type: improvement
Change-Id: I23b705d81d60389fa8af61c680cf0abd74f0ea24
Signed-off-by: Tom Jones <thj@freebsd.org>
|
|
When sanity test is not done, API files are not loaded until the
first test case is run. Hence, it is not possible to use enums, etc.
outside of a test class.
By preloading API files before running any tests, it prevents its
issue.
Type: fix
Change-Id: I8730150374e6c5f8d6933ec037811372ac2a8da0
Signed-off-by: Maxime Peim <mpeim@cisco.com>
|
|
Add an urpf_interface_dump() API call, with optional sw_if_index.
If either a mode or a table is specified in any given interface
address family and direction, return it in a list, otherwise omit
it.
TESTED:
create loopback interface instance 0
create loopback interface instance 1
create loopback interface instance 2
create loopback interface instance 3
ip6 table add 8298
set urpf ip4 rx loose loop1
set urpf ip6 tx off loop2 table 8298
API call urpf_interface_dump(sw_if_index=~1) returns:
[
urpf_interface_details(_0=658, context=2, sw_if_index=2, is_rx=True, mode=<vl_api_urpf_mode_t.URPF_API_MODE_LOOSE: 1>, af=<vl_api_address_family_t.ADDRESS_IP4: 0>, table_id=0),
urpf_interface_details(_0=658, context=2, sw_if_index=3, is_rx=False, mode=<vl_api_urpf_mode_t.URPF_API_MODE_OFF: 0>, af=<vl_api_address_family_t.ADDRESS_IP6: 1>, table_id=8298)
]
Type: improvement
Change-Id: I1ded5c445dc07dab73ea41b817b5827b72ca79d4
Signed-off-by: pim@ipng.nl
|
|
Type: test
Change-Id: Idd608511ed350a8e13afff393e558e20d52627a0
Signed-off-by: adrianvillin <avillin@cisco.com>
|
|
Type: test
Change-Id: I711dfe65ad542a45acd484f0b4e3e6ade9576f66
Signed-off-by: Naveen Joy <najoy@cisco.com>
|
|
This merge request adds the feature to manipulate localsids and policies for SRv6 mobile via API.
Type: feature
Signed-off-by: Takeru Hayasaka <hayatake396@gmail.com>
Change-Id: Ibb46bf71ae1d9d4591ce2c8ccf66f520887dad70
|
|
Type: test
Change-Id: I026d9298fe1372d03f61b6ad57c82628bab4c831
Signed-off-by: adrianvillin <avillin@cisco.com>
|
|
Type: feature
Change-Id: I7b29c71d3d053af9a53931aa333484bf43a424ca
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Fetch 'pg-input' node index instead
of using a hardcoded value
Change-Id: I1ca27ddb54806530b546085d83e83b880acc4573
Signed-off-by: hsandid <halsandi@cisco.com>
|
|
Type: test
Change-Id: Ie054924eb5e5b2b146db8d2b63511c8b0400f045
Signed-off-by: adrianvillin <avillin@cisco.com>
|
|
Pass a correct form of node variant config in tests
Type: fix
Signed-off-by: d-valter@yandex-team.ru
Change-Id: I8cdc240b18a1664e57a5814d6cd644891c99f515
Fixes: 8800f732f868bf54da8adba05e38bd2477895ca5
|
|
Type: test
Change-Id: Id621a806b853688ced7c6a38e1a9e5f298d2b97e
Signed-off-by: adrianvillin <avillin@cisco.com>
|
|
Type: test
Change-Id: I504c079126bd8b33c5e217a1b9086788a8c778e5
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Type: test
Change-Id: I387611cfc361e664eb1e78ae669ba4e3901c4fe6
Signed-off-by: adrianvillin <avillin@cisco.com>
|
|
Type: test
Change-Id: I270798ed68f04bd3974dd39c44e85dad5fa02de0
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Currently, when IPFIX records generation is enabled for an interface in
the TX direction, some rewritten traffic is being sent from that
interface, and the Ethernet header's location has changed due to
rewriting, generated TX flows will contain fields with wrong and zero
values. For example, that can be observed when traffic is rewritten from
a subinterface to a hardware interface (i.e. when tags are removed). A
TX flow generated in this case will have wrong L2 fields because of an
incorrectly located Ethernet header. And zero L3/L4 fields because the
Ethernet type will match neither IP4 nor IP6.
The same code is executed to generate flows for both input and output
features. And the same mechanism is applied to identify the Ethernet
header in the buffer's data. However, such general code usually works
with the buffer's data conditionally based on the direction. For most
input features, the buffer's current_data will likely point to the IP
header. For most output features, the buffer's current_data will likely
point to the Ethernet header.
With this fix:
- Keep relying on ethernet_buffer_get_header() to locate the Ethernet
header for input features. And start using vlib_buffer_get_current()
to locate the Ethernet header for output features. The function will
account for the Ethernet header's position change in the buffer's
data if there is rewriting.
- After fixing Ethernet header determination in the buffer's data,
L3/L4 fields will contain non-zero but still incorrect data. That is
because IP header determination needs to be fixed too. It currently
relies on the fact that the Ethernet header is always located at the
beginning of the buffer's data and that l2_hdr_sz can be used as an
IP header offset. However, this may not be the case after rewriting.
So start calculating the actual offset of the IP header in the
buffer's data.
- Add a unit test to cover the case.
Type: fix
Change-Id: Icf3f9e6518912d06dff0d5aa48e103b3dc94edb7
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
Matus Fabian
Andrew Yourtchenko
Steven Luong
Hadi Rayan Al-Sandid
Mohsin Kazmi
Klement Sekera
Maxime Peim
adrianvillin
Vladislav Grishenko
Pim van Pelt
Dave Wallace
Matthew Smith
Tom Jones
Arthur de Kerhor
Stanislav Zaikin
Alexander Chernavin
Naveen Joy
Denys Haryachyy
Atzm Watanabe
Takeru Hayasaka
Dmitry Valter