aboutsummaryrefslogtreecommitdiffstats
path: root/test
AgeCommit message (Collapse)AuthorFilesLines
2019-08-16hsa: Refactor quic_echo to allow other protocolsNathan Skrzypczak1-2/+2
Type: refactor Change-Id: Iaef9091e1d057110530255e644fad1c298418966 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2019-08-16ipsec: fix missed IPSEC_INTEG_ALG_MD5_96Dmitry Vakhrushev1-3/+3
This algorithm was missed in last improvements. Type:fix Signed-off-by: Dmitry Vakhrushev <dmitry@netgate.com> Change-Id: Ib818cbdcdd1a6f298e8b0086dac4189cc201baa3
2019-08-14gbp: add local l3out redirect to local SEP unit testBenoît Ganne1-3/+36
Type: test Change-Id: Ia6dad86d02f6f665a3e6960812b2527eaabb65f1 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-08-12ip: allow addrs from the same prefix on intfMatthew Smith2-8/+136
Type: feature Adding a prefix to an interface was not permitted if it overlapped with another prefix on an interface which used the same FIB. Loosen the restriction. Allow 2 or more addresses from the same prefix on a single interface. Reference count the prefix to figure out when a glean/connected route for the prefix needs to be added or removed. Added unit tests to check that the route is only removed when all addresses in the prefix are removed from the interface. Change-Id: I1a962ecb5e1ee65fc6d41f98a4cc097a51a55321 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-08-09gbp: add remote EP redirect to remote SEP unit testBenoît Ganne1-1/+94
Type: test Change-Id: I4dd685f9acd4d467e0967e6fdd428558ffc8b209 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-08-09gbp: add unknown remote EP redirect unit testBenoît Ganne1-6/+27
Type: test Change-Id: I1dfbeef08a4f112551450682fc4040820251485b Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-08-07gbp: add l3out redirect to remote SEP unit testBenoît Ganne1-0/+172
Type: test Change-Id: I0fafaebbb1f70488e0bc7d21da778d55fe15c3f5 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-08-07tests: UT for MPLS 6PENeale Ranns1-1/+52
Type: test Change-Id: I48650473591aa181167cf3a86ed2f5da58a81072 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-08-07fib tests: IP multicast over GRENeale Ranns2-1/+76
Type: feature Change-Id: I1632ff23b1bf6d91aa3406c95ebd6ef0aa595f35 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-08-06ethernet: change to mark the CFI bit in the L2 header.Prashant Maheshwari2-5/+18
Type: fix Fixes: 039cbfe2 Signed-off-by: Prashant Maheshwari <pmahesh2@cisco.com> Change-Id: Idca91c73758824688dd6ce61df994be66753d838
2019-08-01ipsec: Redo the anit-replay check post decryptNeale Ranns1-0/+15
Type: fix Change-Id: I1fa8c5326d6f22cfb8dd40e97d8a22d11a716922 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-31lb: vip and as dump/detail api'sHongjun Ni2-0/+160
- lb_vip_dump/lb_vip_details - get all vip. - lb_as_dump/lb_as_details - get all as list per vip. - adds api unit test. - adds vpp_lb to test framework. Ticket: Type: feature Change-Id: I24be50d62c5234f3535cc840603ddd9df7eb3f07 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com> Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2019-07-31gso: fix the test caseMohsin Kazmi1-1/+0
Type: fix Fixes: 22e9cfd760be613f33a4135e9247729b64619cc6 Change-Id: Idb198642e439dc3d54c04d8bde9d3e8382ebf830 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-07-31devices interface tests: vhosst GSO supportSteven Luong1-1/+3
Add gso option in create vhost interface to support gso and checksum offload. Tested with the following startup options in qemu: csum=on,gso=on,guest_csum=on,guest_tso4=on,guest_tso6=on,guest_ufo=on, host_tso4=on,host_tso6=on,host_ufo=on Type: feature Change-Id: I9ba1ee33677a694c4a0dfe66e745b098995902b8 Signed-off-by: Steven Luong <sluong@cisco.com>
2019-07-31qos: Store functionNeale Ranns3-2/+84
Type: feature store: write a QoS value into the buffer meta-data record: Extract a QoS value from a packet header and store it. mark: Make a change to the content of a packet header by writing a stored QoS value Change-Id: I07d1e87dd1ca90d40ac1ae1774fee1b272cab83f Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-31api papi: add alias for timestamp(datetime)/timedeltaPaul Vinciguerra1-10/+19
Now that we have support for f64: - create explicit types for timestamp(datetime)/timedelta - update log_details to use timestamp and remove redundant string representation. If you need the string representation, in python do str(timestamp). If you prefer the raw f64 value, the client can pass in the _no_type_conversion option. Type: feature Change-Id: I547b5fa7122d2afa12628b7db0192c23babbbae8 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-07-31tests: disable pg capture before enabling itAndrew Yourtchenko4-2/+31
In a lot of places within the unit tests pg_start() starts the capture with an already existing capture running for the same test. If the pcap file already exists, then it is renamed and there is no problem. However, there is a potential for race if the previous pg_start() has enabled the capture, but the check for renaming it happened just slightly earlier than the first packet has arrived. Then a second call to pg_start() will hit a check that a file exists, and will cause an error. This is especially visible when running the tests in parallel due to increased load. Solution: disable the capture before enabling it. This will flush the aready running capture and eliminate the race. The additional delay that flushing of the pcap creates has exposed several other race conditions: NAT tests: Some of the NAT reassembly tests verify that the entries were added to the reassembly data structures, but do so by comparing the quantities of entries. With the default timeout being 2s, some of the entries might timeout, resulting in a bogus test failure. Solution: Bump the timeout to 20s for the affected tests. Punt tests: nr_packets == 3 makes test intermittently fail, nr_packets > 3 make it reliably fail, and nr_packets = 2 works Solution: set nr_packets == 2 for the time being IGMP tests: the leave-group calls get a spurious packet from the time the new groups were configured Solution: add 1 second delay before starting to delete the groups Type: test Change-Id: I931182a7b2860cf670e030ee7da8038f6e87356d Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2019-07-31tests: Split IPSec ESP into parameterized tests per engineNeale Ranns2-67/+60
Type: feature Change-Id: Icb1bd3fce768aebf8919c63a104f771ca7fa1d6f Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-31ip: Ensure reassembly runs before IPSec decrypt.Neale Ranns2-3/+78
Type: fix Change-Id: I01eeedf8d5015b07b9422c65afe78bfe8177c22c Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-28build: add option to wipe/rebuild papiPaul Vinciguerra1-0/+6
Previously, the only option was to wipe/rebuild all the test dependencies. Type: make Change-Id: Ia95d6e800f67bef033dcf614dbfa249c3e43159d Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-07-28pg: add GSO supportMohsin Kazmi3-4/+193
Type: feature Change-Id: I72676495a85fbecc946aa266a75234cce70c3a5e Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-07-26dhcp ip: DSCP settings for transmitted DHCP packetsNeale Ranns2-11/+65
Type: feature - Define the ip_dscp_t and use in the IP headers - Add DSCP setting to the DHCP client for use with packet TX Change-Id: If220dde0017ea78793747d65f53e11daf23a28fa Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-26dhcp: send unicast and broadcast packets via the IP adjacencyNeale Ranns1-16/+62
Type: feature this means DHCP packets are subject to the IP features configured on the interface - the unicast packets already were sent throught the adj - added UT for DHCP client sending a unicast renewal Change-Id: Id50db0b71822f44bf7cb639a524195cdc9873526 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-25vom: QoS supportNeale Ranns1-0/+79
Type: feature Change-Id: If517d10c318fc17fdbd797fac8d974d9851f6442 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-24acl: implement countersAndrew Yourtchenko1-5/+35
implement per-acl-number counters in the stats segment. They are created during the ACL creation, the counters are incremented in the dataplane using the new inline function with the extra parameter being the packet size. Counting in shared segment adds a noticeable overhead, so add also an API to turn the counters on. Type: feature Change-Id: I8af7b0c31a3d986b68089eb52452aed45df66c7b Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2019-07-24tests: add cpu/shm info to test runner outputPaul Vinciguerra1-1/+13
Type: test Depends-on: https://gerrit.fd.io/r/#/c/20484/ Change-Id: I140132cfcc4347035fe2bb9919f8e7923342940f Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-07-24qos: QoS dump APIsNeale Ranns3-146/+168
Type: feature Change-Id: I514b40026986f3828c8727453456b20a0a45f3af Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-24fib: Support the POP of a Psuedo Wire Control WordNeale Ranns2-41/+86
Type: feature Change-Id: Ib24547a7c4c73ceb5383d1ca8f14ec40e6a90f01 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-24ipsec: GCM, Anti-replay and ESN fixessNeale Ranns3-78/+210
Type: fix Several Fixes: 1 - Anti-replay did not work with GCM becuase it overwrote the sequence number in the ESP header. To fix i added the seq num to the per-packet data so it is preserved 2 - The high sequence number was not byte swapped during ESP encrypt. 3 - openssl engine was the only one to return FAIL_DECRYPT for bad GCM the others return BAD_HMAC. removed the former 4 - improved tracing to show the low and high seq numbers 5 - documented the anti-replay window checks 6 - fixed scapy patch for ESN support for GCM 7 - tests for anti-reply (w/ and w/o ESN) for each crypto algo Change-Id: Id65d96b6d1d4dd821b2ab557e87468fff6d70e5b Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-24vppinfra: add mapped pcap file supportGary Boon1-0/+55
Type: feature Change-Id: Ic720d56a6f8901efde2a58519bc9aa553205a9a6 Signed-off-by: Gary Boon <gboon@cisco.com> Signed-off-by: Dave Barach <dave@barachs.net>
2019-07-23tests: pin pip versionAloys Augustin1-0/+4
New pip releases can break pip-tools. This commit pins the version of pip used in the test virtualenv to prevent uncontrolled breakage. This fixes the current issue in make test: TypeError: __init__() got an unexpected keyword argument 'index_urls' Change-Id: I3b7ecb31e651401ada0d357e2bf093c91c934565 Type: feature Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
2019-07-19bonding: add support for numa-only in lacp modeZhiyong Yang3-1/+7
If numa-only is set, Only slaves on local numa node transmit pkts if have at least one, otherwise the bond interface works as usual. CLI change: create bond mode lacp [load-balance { l2 | l23 | l34 } {numa-only}] [hw-addr <mac-address>] [id <if-id>] The new member "u8 numa_only;" is also added to bond_create_if_args_t. Type: feature Change-Id: Icdccedafb0738d8c9d4a5acce909ce562428c071 Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-07-19ip: admin change affects intf IPv4 addr routesMatthew G Smith1-0/+74
Type: feature When admin status is changed on an interface, add or delete the routes for the IPv4 addresses configured on that interface. This is already being done for IPv6 interface addresses. Change-Id: Ib1e7dc49c499921dd287e075640243520ffa5589 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-07-16ipsec: handle UDP keepalivesNeale Ranns3-9/+133
Type: feature Change-Id: I87cc1168466f267e8c4bbec318401982f4bdf03a Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-14tests: fix error in VppDiedError exceptionPaul Vinciguerra1-2/+2
Discovered running test-debug job in CI. - fix missing paren () around format value. Type: test Change-Id: Iebddd3035a435f8ad1cb1d6fa4e8e8c2d4ddaf96 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-07-12tests: remove invalid arguments passed to papiPaul Vinciguerra1-5/+1
This changeset removes keys that are invalid in papi kwargs. Type: test Change-Id: I6568f91cd240dc1927540396210b429f6ce82c0a Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-07-12ip ipsec: Remove IPSec SPI-0 punt reasonNeale Ranns1-26/+32
Type: fix There's no call for an SPI-0 punt reason with UDP encap, since it's only with UDP encap that the ambiguity between IKE or IPSEC occurs (and SPI=0 determines IKE). Enhance the punt API to dum ponly the reason requested, so a client can use this as a get-ID API Change-Id: I5c6d72b03885e88c489117677e72f1ef5da90dfc Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-11gbp: An Endpoint can change sclassNeale Ranns1-1/+65
Type: feature Change-Id: I9d3a73a6a6048fa0189f7fa6306a638279977fcd Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-10tests: Re-enable ipsec tests on ARMjuraj.linkes2-6/+4
Type: fix * test_ipsec_tun_if_esp.TestIpsecGreTebIfEsp * test_ipsec_esp.TestIpsecEspAll add keepalive messages before each algo/engine to prevent test timeout Change-Id: I726f3f9613bab02a65e65542cee494c68176ded7 Signed-off-by: juraj.linkes <juraj.linkes@pantheon.tech>
2019-07-09tests: remove unused class attribute in VppTestCasePaul Vinciguerra1-1/+0
Identified in post-merge review. Type: test Change-Id: I46e19285479437561a43975ba9b5cb68f478736c Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-07-09gbp: Ownership of dynamically created vxlan-gbp tunnels managed via gbp_itfNeale Ranns1-19/+66
Type: fix This solves the ownership of vxlan-gbp tunnels. When the last reference of these goes away they need to be deleted. Currently there are two owners; gbp_itf via gef_itf and the lock held by the gbp_endpoint_location_t. The problem is that the loc removes its reference whilst the fwd still holds the gbp_itf, and things go wrong. This change moves the lifecycle management of the vxlan-gbp tunnel to the gbp_itf. When the last lock of the gbp_itf goes, so does the tunnel. now both the EP's loc and fwd can hold a lock on the gbp_itf and it's only removed when required. The other change is the management of the 'user' of the gbp_itf. Since each user can enable and disable different features, it's the job of the gbp_itf to apply the combined set. determining a unique 'uesr' from the caller was near impossible, so I moved that to the gbp_itf, and return the allocated user, hence the 'handle' that encodes both user and interface. The hash table maps from sw_if_index to pool index. Change-Id: I4c7bf4c0e5dcf33d1c545f262365e69151febcf4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-09quic: add back missing test timeoutNathan Skrzypczak1-2/+2
Type: fix Change-Id: Ic153b2bc754ee69949f6e5fd412c474f9ed722f0 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2019-07-09tests: treat all truthy env vars the same wayPaul Vinciguerra2-13/+31
Introduce a new class, that returns the truthiness of a env var. Since an environment variable is just a string, it would normally be true if not unset. The new class returns true when the env var is set to a string that would be considered true. Type: test Depends-on: https://gerrit.fd.io/r/20484 Change-Id: I90ef010156f6fec246bde5c0e208ced1869b180f Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-07-09vppinfra: allocate bihash virtual space on demandDave Barach1-0/+1
Reduces the vpp image virtual size by multiple gigabytes Add a "show bihash" command which displays configured and current virtual space in use by bihash tables. Modify the .py test framework to call "show bihash" on test tear-down Type: refactor Change-Id: Ifc1b7e2c43d29bbef645f6802fa29ff8ef09940c Signed-off-by: Dave Barach <dave@barachs.net>
2019-07-08map gbp papi: match endianess of f64Paul Vinciguerra1-0/+38
clib_net_to_host_f64, clib_host_to_net_f64 are now implemented as '=', https://gerrit.fd.io/r/#/c/20406/ set papi to match. - all f64 api references are now wrapped with clib_net_to_host_f64 or clib_host_to_net_f64. IEEE f64 endianess is not defined. If clib_net_to_host_f64 and clib_host_to_net_f64 are later defined in VPP as big-endian, it is a single character change in the papi vpp_serializer. Note: This breaks the api in a manner that would not be detected by the flag day initiative. The scope is small. This only impacts map.api, which applied the u64 transformation, while the gbp api uses '='. The implementation of "=" raises issues for the papi socket implementation if used between systems of differing endianess. See Vratko's comments. - Added get_f64_endian_value() to api to allow client to verify endianess of f64's. Type: fix Depends-on: https://gerrit.fd.io/r/#/c/20484/ Change-Id: I00fc64a6557ba0190398df211aa0ea5c7eb101df Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-07-08gbp: More unit testsNeale Ranns1-55/+449
Type: test Change-Id: I0a58cc19bdfb73eabadbf6eb49b57e8db96959b5 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-08api: Implement log_dump/log_detailsPaul Vinciguerra1-0/+46
- Replaces the need to screen scrape "show log". - Adds an api to return the system time. When running over a socket, the api client may have different time than the vpp host. expected use: vpp_time_before_command = self.vapi.show_vpe_system_time_ticks().vpe_system_time_ticks <run some commands> log_output = self.vapi.log_dump(start_timestamp=vpp_time_before_command) Depends-on: https://gerrit.fd.io/r/20484 Depends-on: https://gerrit.fd.io/r/#/c/19581/ ============================================================================== TestVpeApi ============================================================================== log_details(_0=838, context=3, timestamp_ticks=2.4954863503546518e+48, level=<vl_api_log_level_t.VPE_API_LOG_LEVEL_WARNING: 4>, timestamp=u'2019/07/04 20:35:41:281', msg_class=u'buffer', message=u'vlib_physmem_shared_map_create: clib_mem_create_hugetlb_fd: open: No such file or directory\n\n') log_details(_0=838, context=3, timestamp_ticks=1.6101902879480125e+159, level=<vl_api_log_level_t.VPE_API_LOG_LEVEL_WARNING: 4>, timestamp=u'2019/07/04 20:35:41:281', msg_class=u'buffer', message=u'falling back to non-hugepage backed buffer pool') test_log_dump_default (test_vpe_api.TestVpeApi) OK log_details(_0=838, context=13, timestamp_ticks=2.4954863503546518e+48, level=<vl_api_log_level_t.VPE_API_LOG_LEVEL_WARNING: 4>, timestamp=u'2019/07/04 20:35:41:281', msg_class=u'buffer', message=u'vlib_physmem_shared_map_create: clib_mem_create_hugetlb_fd: open: No such file or directory\n\n') log_details(_0=838, context=13, timestamp_ticks=1.6101902879480125e+159, level=<vl_api_log_level_t.VPE_API_LOG_LEVEL_WARNING: 4>, timestamp=u'2019/07/04 20:35:41:281', msg_class=u'buffer', message=u'falling back to non-hugepage backed buffer pool') test_log_dump_timestamp_0 (test_vpe_api.TestVpeApi) OK test_log_dump_timestamp_future (test_vpe_api.TestVpeApi) SKIP test_show_vpe_system_time_ticks (test_vpe_api.TestVpeApi) SKIP ============================================================================== TEST RESULTS: Scheduled tests: 4 Executed tests: 4 Passed tests: 2 Skipped tests: 2 ============================================================================== Test run was successful Type: feature Change-Id: I893fc0a65f39749d2091093c2c604659aadd8447 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-07-05vxlan-gbp: Decap ignores reserved bitsNeale Ranns1-4/+7
Type: fix from the draft: 3. Backward Compatibility VXLAN [RFC7348] requires reserved fields to be set to zero on transmit and ignored on receive. Change-Id: I98544907894f1a6eba9595a37c3c88322905630e Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-05sctp: move to plugins, disabled by defaultFlorin Coras1-0/+1
Removed sctp buffer metadata from vnet/buffer.h, added it to the plugin. Add registration APIs for plugin-based vlib_buffer_opaque / opaque2 decoders, used by "pcap dispatch trace ..." for display in the wireshark dissector. Type:refactor Not actively maintained. Change-Id: Ie4cb6ba66f68b3b3a7d7d2c63c917fdccf994371 Signed-off-by: Florin Coras <fcoras@cisco.com> Signed-off-by: Dave Barach <dave@barachs.net>
2019-07-05gbp: add unit-tests for anonymous l3outBenoît Ganne2-28/+498
Type: test Change-Id: Ib32c87b7f07c0552a6801a895332a0156c3c37f0 Signed-off-by: Benoît Ganne <bganne@cisco.com>