summaryrefslogtreecommitdiffstats
path: root/test
AgeCommit message (Collapse)AuthorFilesLines
2018-03-24make test: fix DEBUG=gdb/gdbserver optionsKlement Sekera1-4/+3
Change-Id: I5a7fa3b1c247ad5611907db27835724dcd31f575 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-03-24make test: fix ext build on centosKlement Sekera1-1/+1
Change-Id: I2b01f73c4b10a230310a65b6f35526818bf4f76d Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-03-24make test: use vpp-dev repo for py-lispnetworkingKlement Sekera1-1/+1
Change-Id: Ia87d55cad1d466a4cc624f06abbc322cddb5608c Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-03-24make test: enhance core-file informationKlement Sekera2-17/+32
Change-Id: I1283960a9a49f6d70b9d7b7793cfb345c22ccdea Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-03-23Add client hw address to DHCP offer and ack in test caseNeale Ranns1-6/+11
Change-Id: Ifc9bb4ea39b504372a6a39bbf56c29761d0c6111 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-23acl-plugin: improvements in 'show acl-plugin macip acl' CLIAndrew Yourtchenko1-0/+6
- allow to optionally specify the specific MACIP ACL index: 'show acl-plugin macip acl [index N]' - after showing the MACIP ACL, show the sw_if_index of interface(s) where it is applied. Also, add some executions of this debug commands to the MACIP test case for easy verification. Change-Id: I56cf8272abc20b1b2581b60d528d27a70d186b18 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-03-23Drop dhcp pkts w/ hardware address mismatchesDave Barach1-0/+1
Add a few dhcp client rx packet/state counters Temporarily disable the dhcp client unit test, since it trips over the newly-added hardware address check. Change-Id: I7f68607e6ed3d738cba357c3fe76664a99b71cd8 Signed-off-by: Dave Barach <dave@barachs.net>
2018-03-23acl-plugin: make test: do not use a debug CLI where API can be usedAndrew Yourtchenko1-6/+3
Parsing the list of applied ACLs from the debug CLI output is not a good idea, since the debug CLI can and will change. Fix that. Change-Id: Ia47214863f2658a54219f59cb974b5cbc536f862 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-03-23make test: code cleanupKlement Sekera3-57/+38
Change-Id: Ic689de569e5b6e6209d16d6acdb13c489daca1f5 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-03-23acl-plugin: make test: add a test which deletes an interface with applied ACLAndrew Yourtchenko1-0/+39
There was no test coverage for a scenario of an interface having an ACL and that interface being deleted. Add a basic sanity test which applies an ACL to an interface and then deletes that interface. Change-Id: Ib6462e02cf69f1173125ac2481c608f68eb389ac Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-03-23acl-plugin: make test: shuffle applied ACLs as part of the testsAndrew Yourtchenko2-1/+85
During the testing of 94f9a6de3f706243d138e05b63fef1d5c8174f6c I realized there was no test coverage for the cases where the ACLs are added then modified while having beein applied. This change adds some simple shuffling to l2l3 ACL test set, whereby after each of the ACLs being applied, a few extra ACLs are applied at the front and the back of the list, and are changed several times, the base for the changes being the set of all the ACEs that are being applied previously. After these few shuffles, the routine restores the applied ACLs and proceeds to the test as usual. Change-Id: Ieda2aa5b7963746d62484e54719309de9c1ee752 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-03-23IGMP: coverity fixes and remove checks for scapy IGMPv3Neale Ranns1-16/+1
Change-Id: Ic2eddc803f9ba8215e37388a686004830211cf6f Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-03-22NAT44: interface output feature and dst NAT (VPP-1200)Matus Fabian1-0/+59
Do not translate packet which go out via nat44-in2out-output and was tranlated in nat44-out2in before. On way back forward packet to nat44-in2out node. Change-Id: I934d69856f0178c86ff879bc691c9e074b8485c8 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-03-21bond: Add bonding driver and LACP protocolSteven3-0/+405
Add bonding driver to support creation of bond interface which composes of multiple slave interfaces. The slave interfaces could be physical interfaces, or just any virtual interfaces. For example, memif interfaces. The syntax to create a bond interface is create bond mode <lacp | xor | acitve-backup | broadcast | round-robin> To enslave an interface to the bond interface, enslave interface TenGigabitEthernet6/0/0 to BondEthernet0 Please see src/plugins/lacp/lacp_doc.md for more examples and additional options. LACP is a control plane protocol which manages and monitors the status of the slave interfaces. The protocol is part of 802.3ad standard. This patch implements LACPv1. LACPv2 is not supported. To enable LACP on the bond interface, specify "mode lacp" when the bond interface is created. The syntax to enslave a slave interface is the same as other bonding modes. Change-Id: I06581d3b87635972f9f0e1ec50b67560fc13e26c Signed-off-by: Steven <sluong@cisco.com>
2018-03-21UDP Encap countersNeale Ranns1-0/+5
Change-Id: Ib5639981dca0b11b2d62acf2c0963cc95c380f70 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-21reassembly: feature/concurrencyKlement Sekera6-345/+203
This change makes ip reassembly an interface feature, while adding concurrency support. Due to this, punt is no longer needed to test reassembly. Change-Id: I467669514ec33283ce935be0f1dd08f07684f0c7 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-03-20FIB Interpose SourceNeale Ranns3-18/+39
The interpose source allows the source/provider to insert/interpose a DPO in the forwarding chain of the FIB entry ahead of the forwarding provided by the next best source. For example if the API source (i.e the 'control plane') has provided an adjacency for forwarding, then an interpose source (e.g. a monitoring service) couold interpose a replicatte DPO to copy the traffic to another location AND forward using the API's adjacency. To use the interose feature an existing source (i.e FIB_SOURCE_PLUGIN_HI) cn specifiy as a flag FIB_ENTRY_FLAG_INTERPOSE and provide a DPO to interpose. One might also consider using interpose in conjunction with FIB_ENTRY_FLAG_COVER_INHERIT to ensure the interpose object affects all prefixes in the sub-tree. Change-Id: I8b2737b985f8f7c08123406d0491881def347b52 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-19IGMP pluginJakub Grajciar3-0/+398
- host mode: igmp_listen - API to signal that the host has joined an (S,G) - route mode: igmp_enable - API to enable the reception of host IGMP messages igmp_event - API to report the host join/leave from an (S,G) Change-Id: Id180ec27dee617d33ab3088f5dcf6125d3aa9c8f Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-03-19Scapy upgrade to 2.4.0.rc5Neale Ranns11-10/+211
- many of the patches fd.io applies in test/patches/2.3.3 are now upstreamed in 2.4 - 2.4 adds support for IGMPv3 which is my main motivation for the upgrade Change-Id: If2c0a524e3cba320b4a5d8cd07817c6ea2bf0c5a Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-18Remove unnumbered configuration on interface deleteNeale Ranns2-20/+33
Change-Id: Iae5532c3d53e208831f3b2782242d9e59d367087 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-16QoS recording and markingNeale Ranns2-0/+402
Change-Id: Ie5a50def4ec1e4a3b3404a8b6ab9ec248bc16744 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-16IPv6 ND Router discovery control plane (VPP-1095)Juraj Sloboda3-7/+204
Change-Id: I4b5b60e7c6f618bb935eab1e96a2e79bbb14f58f Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-03-16remove spurious print statements from DVR testsNeale Ranns1-2/+0
Change-Id: I3b1c71b144b4760922a467086fcdb410cd225c57 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-16IPv6 ND Router discovery data plane (VPP-1095)Juraj Sloboda3-3/+132
Add API call to send Router Solicitation messages. Save info from incoming Router Advertisement messages and notify listeners. Change-Id: Ie518b5492231e03291bd4c4280be4727bfecab46 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-03-15make test: Add VCL iperf3 testsDave Wallace1-36/+102
Change-Id: I101a44aa4913bee8d9a1aa37822e8e7e61c7aa1d Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2018-03-15IPIP: Linter on test_*.pyOle Troan3-137/+78
Change-Id: Icd491e382a2da0e5d55a673458605bc37e39b669 Signed-off-by: Ole Troan <ot@cisco.com>
2018-03-14make test: early core detection, code cleanupKlement Sekera3-10/+31
Change-Id: I503d69f902f1c8d3107fb3f2b9f31b0083ebb747 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-03-14IPIP: Add IP{v4,v6} over IP{v4,v6} configured tunnel support.Ole Troan3-25/+299
Change-Id: I166301c9e2388bae5f70ec0179d663a2703e27f5 Signed-off-by: Ole Troan <ot@cisco.com>
2018-03-14socket_test.sh: Don't hard code debug image with gdb.Dave Wallace1-3/+0
Change-Id: Idd6c175b9102c74621c027136ab4550821a23ecc Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2018-03-14make test: handle multiple failures in one caseKlement Sekera1-1/+4
Change-Id: I5451ddec4bfdede12653415f90bf991e81494033 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-03-14Improve l2_macs_events API to provide MAC move informationJohn Lo1-2/+7
Change mac_entry layout in l2_macs_event API message so the MAC entry can be either add, delete or move where the sw_if_index of an existing MAC entry changed. Also added a 8-bit flags field in mac_entry for any future expansion. Change-Id: I3bf9e1cf2556f2938202025a5d0772c2ce2fc99f Signed-off-by: John Lo <loj@cisco.com>
2018-03-14VOM: acl: Add support for acl ethertype unbind and dumpMohsin Kazmi1-0/+5
Change-Id: I667b9ccabe54c8f9cff5b1a2e63864965f5064f5 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-03-13Common form of fib-path reproting in dumpsNeale Ranns1-0/+17
Change-Id: I8f6fdbbeef2ac7e9fe5d87490ae5cba6e9a0b294 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-12NAT44: fix nat_not_translate_output_feature for ICMP (VPP-1191)Matus Fabian1-37/+42
Change-Id: I1552e1418b704fdf1f1fa2c0174313b9b82a37a3 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-03-09make test: Force VCL test timeouts to FAIL test.Dave Wallace1-2/+8
Change-Id: Ie8d3bcb9021d9272bd27dba35d30e5081023f061 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2018-03-09MPLS Unifom modeNeale Ranns7-414/+570
- support both pipe and uniform modes for all MPLS LSP - all API programming for output-labels requires that the mode (and associated data) is specificed - API changes in MPLS, BIER and IP are involved - new DPO [sub] types for MPLS labels to handle the two modes. Change-Id: I87b76401e996f10dfbdbe4552ff6b19af958783c Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-08VCL: Add full hoststack test option to socket_test.shDave Wallace1-7/+72
Change-Id: I3e5e179daa9d6f1c46adb85b05dd810bdd312054 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2018-03-07test: disable reassembly tests and system modification scriptDamjan Marion2-1/+0
One of basic requirements from day one for maek test is that it should run unpriviledged, so modifying system paremeters is unacceptable. Disabling script and reassembly tests as they need to be done in different way. Change-Id: I063c73eb82f2ebd7499e8adb1574a9fd2475fb5b Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-03-02make test: VCL extended test casesDave Wallace1-16/+194
- Add VCL cut thru uni-direction test over multiple sockets - Add VCL cut thru bi-direction test over multiple sockets - Add LDP cut thru uni-directional test over multiple sockets - Add LDP cut thru bi-directional test over multiple sockets - Add VCL thru host stack uni-direction test over multiple sockets - Add VCL thru host stack bi-direction test over multiple sockets - Add LDP thru host stack uni-directional test over multiple sockets - Add LDP thru host stack bi-directional test over multiple sockets - Fix validateResults to ensure worker_server process is killed if it still exists after running the test. Change-Id: I77ea9acef172667558dbcec23af1e4c72b29f376 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2018-03-02make test: add "EXTENDED_TESTS" to help output.Dave Wallace1-0/+1
Change-Id: I89540e93f3c8839bf6fc4363f4736e9c01d91927 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2018-03-02NAT44: interface output feature and service host direct access (VPP-1176)Matus Fabian1-0/+44
forwarding mode: session initiaded from service host - translate session initiaded from remote host - do not translate Change-Id: I48170ee8e4ad14d3d3083ee31a40ef8d10d6ff32 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-03-016RD: Rewritten 6RD RFC5969 support.Ole Troan3-1/+309
Change-Id: Ic30fbcb2630f39e45345d7215babf5d7ed4b33a0 Signed-off-by: Ole Troan <ot@cisco.com>
2018-03-01Fix ERSPAN encap to set EN bits in the header and add test caseJohn Lo2-2/+100
For ERSPAN encap, both bits in the EN field of the header should be set to indicate any VLAN tag in the original Ethernet frame is preserved. Added SPAN L2 test case where the mirrored packet output is a GRE ERSPAN tunnel. Change-Id: Ie7a40992a9278469c24aa6fa9e122b4505797d10 Signed-off-by: John Lo <loj@cisco.com>
2018-03-01make test: Add VCL LD_PRELOAD testsDave Wallace1-76/+117
- Refactor test code into VclTestCase object. - Add LDP cut thru and thru host stack tests. Change-Id: I2b16473df108004c79cc86fe1b7a789485b2dc5b Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2018-02-27make test: refactor vcl test casesDave Wallace2-89/+81
- Reduce replicated code in test cases - Configure separate namespace secrets for thru hoststack test case to validate namespace secret functionality. - Pass per-instance environment variables to Worker class init function. Change-Id: I3cd5d4538f105cbfb09671c4d761541b40714b8f Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2018-02-26Python: addressing PEP8 deprecationMarco Varlese1-2/+2
PEP8 has been deprecated and python users are being asked to migrate to pycodestyle. Change-Id: I52d5f7b2bf72156216a9966e8322ec58763f24d4 Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-02-26update BIER scapy patch to match the scapy repo PRNeale Ranns1-4/+2
Change-Id: I4953b8444b49d1ad445c98a199ae8fd1635e24a5 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-02-25SCTP: fix connection memory corruptionMarco Varlese1-2/+3
A bug was found when multiple SCTP connections were being opened to the same SCTP server. This patch addresses that problem, removing the use of the 'parent' pointer approach for sub-connection and saving instead within the sub-connection itself the ID representing its position. That facilitates pointer-arithmetic to be computed in the get_connection_from_transport(). Change-Id: Iaa1f4efc501590be1c93e42fd6fe3d6e02f635eb Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-02-24LDP: Refactor epoll_ctl wrapper.Dave Wallace1-2/+2
- Add AF_UNIX transaction to sock_test_client/server echo test to verify mixed epoll ldp implementation. - Misc cleanup / refactoring of ldp code. - Fix LDP_DEBUG in test/socket_test.sh Change-Id: Ib524c824728f109007d8c4d07d74603b6c687902 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2018-02-22VOM: vhost-use interfacesNeale Ranns1-1/+29
Change-Id: Iee1574d1f0f081ccc4a90fd9825a0b5e254aa642 Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>