Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: Ic65f686aaccaf8450732d88d7471b587faccaa9d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
The underlying failure has been fixed and now the test can be
re-enabled.
Change-Id: I75251f6150ef1771dc23ea079799229690cf87d9
Signed-off-by: juraj.linkes <juraj.linkes@pantheon.tech>
|
|
The underlying failure has been fixed.
Change-Id: If2ca92a17cfed1c2d7253e46ab161f301f847f29
Signed-off-by: juraj.linkes <juraj.linkes@pantheon.tech>
|
|
Change-Id: I8993132bdd0931c96ba8bc879ec3b4ae938a46c5
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I1bd14d5aff4918b58aef18fa0a9264e033989f6e
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
- fixes in ip.api for dumping mroute path flags
Change-Id: I13b0cfb15d374250ed71bd4e13dda9b798c18204
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I24cf3e390f6f0b98be939ef717048742d3f183d6
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
This reverts commit be16020c5034bc69df25a8ecd7081aec9898d93c.
The arm verify job actually failed but the result was overwritten by an x86 ubuntu retry.
Change-Id: Idcae7691fc575053563b8ff8bcad661c15891668
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I99c0737dfeeec2db267773625ddc9b55324fd237
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Allows app to push data. Additionally, ensure reset/close replies are
not sent unless vcl closes the session.
Change-Id: Icbbf933cf57b55cfbcc7b802af0f83919a066f65
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I74782d3b9b71a071bb500c34866a017b8ee15767
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I25c86aea23dff19656449b23133db27b1f062ac0
Signed-off-by: Jon Loeliger <jdl@netgate.com>
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
This reverts commit 919efad2671993d4c6d5a0dba8eeb99d5c60edf1.
Change-Id: I5ec4fa08a03f508dac684dc1ddbd7e6b85c49b97
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
* This allows for VppTestCase to instantiated with an empty constructor.
Change-Id: Ib71d3bfb4529e113f9b73c39de9b95f12ee9cfb4
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
* Allows test cases to configure the VPP runtime config
during fixture setup.
* Sample use in a TestCase:
@classmethod
def setUpConstants(cls):
tempdir = cls.tempdir
cls.config.add('punt', 'socket', '%s/socket_punt' % cls.tempdir)
super(TestPuntSocket, cls).setUpConstants()
# enable/disabe a plugin via:
#cls.config.add_plugin('dpdk_plugin.so', 'disable')
* Supports the following config stanzas:
'unix',
'acl-plugin'
'api-queue'
'api-trace'
'api-segment'
'cj'
'cpu'
'dns'
'dpdk
# currently don't support dynamic keys
# 'heapsize'
'l2learn'
'l2tp'
'mactime'
'mc'
'nat'
'oam'
'plugins'
'punt'
'session'
'socksvr'
'statseg'
'tapcli'
'tcp'
'tuntap'
'vhost-user'
Change-Id: I44f276487267d26eaa46f87e730bdd861003b234
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I3b5d369a37233c7bb2113ce31479371c610977ef
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I41a82e21571d5c64d01af72cd88c3983afac26ed
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I28e8a99b980ad343a4209e673201791b91ceab4e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
* Correct 'is' (identity) usage where equality is needed '=='.
* Change raise 'Exception' to log message and return NotImplemented.
(see: https://docs.python.org/3/library/constants.html#NotImplemented)
* Remove duplicate property: bytes.
* Remove duplicate method: __eq__.
Change-Id: Id3ae4f92f985eb7cef334e2679f19ecc971007c1
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
'raw_input' does not exist in python3.
Change-Id: I95d916db2834fab83e5e791f35103a4513e610b8
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
The runnning environment is static as of module load time,
so only evalute the conditions once at module load time.
Track-by: VPP-1518
Change-Id: I73b0d17ae1ff90789e70307f168d43921829aec8
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: Iaa39aea990bc04147f6a049215e990a567d30106
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: Iff71a5982b73c97e3f546beb1cf52935a267f5f5
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I5419e06592b0402e911e132796368800321f355a
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Fix misc VAPI/VOM generation and test cases.
Change-Id: I1abf9ecdb6f8a2129f11e0a9ed1c0fe04cdf5c47
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change the definition of vl_api_mac_address_t to an aliased type.
Change-Id: I1434f316d0fad6a099592f39bceeb8faeaf1d134
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I0e25c23fc7b44b465f1b0d05a881fbe9816a0264
Signed-off-by: Pavel Kotucek <pavel.kotucek@pantheon.tech>
|
|
Change-Id: Ief316756635794dadf2f0f4190aa20745df5e53c
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
The tests fail if run independently or out of order.
This change breaks the dependency between the tests.
ERROR: Add 1k routes
------------------------------------------------------------------------------
Traceback (most recent call last):
File "/vpp/test/test_ip4.py", line 514, in test_3_add_new_routes
self.deleted_routes.remove(x)
ValueError: list.remove(x): x not in list
Change-Id: I344ceba6bd8b86556f92e50080be6c43092b9faf
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I00d7b38bd99e81e3921ce08cce50d613f11de36e
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I7a48890c075826fbd8c75436dfdc5ffff230a693
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I5d1852a09712adfe7547c200d161539736aca6f5
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
In a rare case a failure can occur in a VppTestCase which hasn't been
part of the original TestSuite, such as in memif testcases. Fix the
reporting after test run in these cases.
Change-Id: Ib2a34fc195179605c22b95bd0e2c7cebca17012f
Signed-off-by: juraj.linkes <juraj.linkes@pantheon.tech>
|
|
Change-Id: I6af2c8552aeafe0abc8b8c3e5af1a05640e95919
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: Ib5a20bff7d8a340ecf50bcd4a023d6bf36382ba3
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
* Add human-friendly annotations to packed data values in
the logs.
Examples:
vpp-unittest-TestNAT66-_JdbMS/log.txt:22:31:29,152 API: ip_neighbor_add_del (is_static=0, is_no_adj_fib=0, is_add=1, sw_if_index=2, dst_address='\xfd\x01\x00\x02\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02 (fd01:2::2)', mac_address='\x02\x02\x00\x00\xff\x02 (02:02:00:00:ff:02)', is_ipv6=1)
vpp-unittest-TestACL_dot1ad_bridged-xEdhrj/log.txt:22:31:17,130 API: ip_neighbor_add_del (is_static=0, is_no_adj_fib=0, is_add=1, sw_if_index=5, dst_address='\xfd\x01\x00\x05\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xc9 (fd01:5::c9)', mac_address='\x02\x05\xc9\x00\xff\xc9 (02:05:c9:00:ff:c9)', is_ipv6=1)
vpp-unittest-TestACL_dot1ad_bridged-xEdhrj/log.txt:22:31:17,240 API: sw_interface_add_del_address (address_length=24, del_all=0, is_add=1, sw_if_index=6, address='\xac\x10\x06\x01 (172.16.6.1)', is_ipv6=0)
vpp-unittest-TestACL_dot1ad_bridged-xEdhrj/log.txt:22:31:17,314 API: sw_interface_add_del_address (address_length=64, del_all=0, is_add=1, sw_if_index=6, address='\xfd\x01\x00\x06\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01 (fd01:6::1)', is_ipv6=1)
Change-Id: Id6991569ee0ff853f76fae8fac941e8a26468a19
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
The new string type is modelled after string in proto3.
It is always variable length.
Change-Id: I64884067e28a80072c8dac31b7c7c82d6e306051
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Michal Cmarada <mcmarada@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
This patch deprecates old stats and adds support for
new stats.
This implements the PULL design where client will enable
stats on objects (i.e. interfaces, etc), register a call
back function which will run once stats will be ready for
enabled object and call HW::read_stats() periodically to
read stats for enabled objects from VPP.
Change-Id: I32525a417427be87408d01f8bc93a731602ff690
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I23b44d883fbd7919bf55b96b180f97837fd6dae9
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Once the hostname is longer than 15 bytes,
the name of device in the output of show cdp command will be truncated,
and CDP test case will fail with below message.
==============================================================================
FAIL: test_send_cdp_packet (test_cdp.TestCDP)
------------------------------------------------------------------------------
Traceback (most recent call last):
File "vpp/test/test_cdp.py", line 92, in test_send_cdp_packet
"CDP received invalid device id")
File "vpp/test/framework.py", line 804, in assert_equal
self.assertEqual(real_value, expected_value, msg)
AssertionError: Invalid CDP received invalid device id: net-x86-supermi does not match expected value net-x86-supermicro-02
Change-Id: Ia32b92c6cd1bb6070adcee3ec45e38399ec382a7
Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
|
|
The API calls that use any of vl_api_address_t, vl_api_ip4_address,
vl_api_ip6_address_t, vl_api_prefix_t, vl_api_ip4_prefix_t,
vl_api_ip6_prefix_t now accepts either the old style dictionary,
a text string (2001:db8::/32) or an ipaddress ojbect.
Unless it is called with '_no_type_conversion':True, it will
also return an appropriate ipaddress object.
Change-Id: I84e4a1577bd57f6b5ae725f316a523988b6a955b
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: Icd575b8ed62c340c57857ff6576f65557434f3e0
Signed-off-by: juraj.linkes <juraj.linkes@pantheon.tech>
|
|
Change-Id: I5f4464435f1346207f2f9b497369795eb82b58b6
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ib0d9b533d72c899b77c9a7bd1daa9b4a55b7221c
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
* When the framework logs an unexpected sleep time,
display the units in the same format. Typically,
it has been returning a float and an 'e'.
ex. unexpected time.sleep() result - slept for 0.000107049942017s instead of ~4.88758087158e-05s!
* Defer logger interpolation.
Change-Id: I543ad6d41c7f263d61615341437f80973c0017de
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Add 2/3 support to binarytomac and mactobinary and move to vpp_mac.py
Change-Id: I3dc7e4a24486aee22140c781aae7e44e58935877
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
if a tunnel's destination address is reachable through the tunnel
(see example config belwo) then search for and detect a recursion
loop and don't stack the adjacency. Otherwise this results in a
nasty surprise.
DBGvpp# loop cre
DBGvpp# set int state loop0 up
DBGvpp# set int ip addr loop0 10.0.0.1/24
DBGvpp# create gre tunnel src 10.0.0.1 dst 1.1.1.1
DBGvpp# set int state gre0 up
DBGvpp# set int unnum gre0 use loop0
DBGvpp# ip route 1.1.1.1/32 via gre0
DBGvpp# sh ip fib 1.1.1.1
ipv4-VRF:0, fib_index:0, flow hash:[src dst sport dport proto ] locks:[src:plugin-hi:2, src:default-route:1, ]
1.1.1.1/32 fib:0 index:11 locks:4 <<< this is entry #11
src:CLI refs:1 entry-flags:attached, src-flags:added,contributing,active,
path-list:[14] locks:2 flags:shared,looped, uPRF-list:12 len:1 itfs:[2, ]
path:[14] pl-index:14 ip4 weight=1 pref=0 attached-nexthop: oper-flags:recursive-loop,resolved, cfg-flags:attached,
1.1.1.1 gre0 (p2p)
[@0]: ipv4 via 0.0.0.0 gre0: mtu:9000 4500000000000000fe2fb0cc0a0000010101010100000800
stacked-on entry:11: <<<< and the midchain forwards via entry #11
[@2]: dpo-drop ip4
src:recursive-resolution refs:1 src-flags:added, cover:-1
forwarding: unicast-ip4-chain
[@0]: dpo-load-balance: [proto:ip4 index:13 buckets:1 uRPF:12 to:[0:0]]
[0] [@6]: ipv4 via 0.0.0.0 gre0: mtu:9000 4500000000000000fe2fb0cc0a0000010101010100000800
stacked-on entry:11:
[@2]: dpo-drop ip4
DBGvpp# sh adj 1
[@1] ipv4 via 0.0.0.0 gre0: mtu:9000 4500000000000000fe2fb0cc0a0000010101010100000800
stacked-on entry:11:
[@2]: dpo-drop ip4
flags:midchain-ip-stack midchain-looped <<<<< this is a loop
counts:[0:0]
locks:4
delegates:
children:
{path:14}
Change-Id: I39b82bd1ea439be4611c88b130d40289fa0c1b59
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: If7835e9b80ec9402404bfc8d271eb11a10ef992b
Signed-off-by: Pavel Kotucek <pavel.kotucek@pantheon.tech>
|
|
The test reader thread could get stuck in case an unexpected Exception
was raised during test runs in parent thread. Catch the Exception, close
the thread and raise the Exception to avoid this.
Change-Id: I3a9298d593c334d96d04b6207d604b684572a2ac
Signed-off-by: juraj.linkes <juraj.linkes@pantheon.tech>
|
|
This patch is a followup to: https://gerrit.fd.io/r/#/c/16307/ which is
currently causing ubuntu1804 to complain.
See: https://logs.fd.io/production/vex-yul-rot-jenkins-1/vpp-beta-verify-master-ubuntu1804/3837/console-timestamp.log.gz
s/RuntimeError/ for details.
==============================================================================
L2BD arp termination Test Case
==============================================================================
12:02:21,850 Couldn't stat : /tmp/vpp-unittest-TestL2bdArpTerm-_h44qo/stats.sock
L2BD arp term - add 5 hosts, verify arp responses OK
L2BD arp term - delete 3 hosts, verify arp responses OK
L2BD arp term - recreate BD1, readd 3 hosts, verify arp responses OK
L2BD arp term - 2 IP4 addrs per host OK
L2BD arp term - create and update 10 IP4-mac pairs OK
L2BD arp/ND term - hosts with both ip4/ip6 OK
L2BD ND term - Add and Del hosts, verify ND replies OK
L2BD ND term - Add and update IP+mac, verify ND replies OK
L2BD arp term - send garps, verify arp event reports OK
L2BD arp term - send duplicate garps, verify suppression OK
L2BD arp term - disable ip4 arp events,send garps, verify no events OK
L2BD ND term - send NS packets verify reports OK
L2BD ND term - send duplicate ns, verify suppression OK
L2BD ND term - disable ip4 arp events,send ns, verify no events OK
==============================================================================
TEST RESULTS:
Scheduled tests: 14
Executed tests: 14
Passed tests: 14
==============================================================================
Test run was successful
Change-Id: If66f22412f8aa36b183131cd22af4b3e7a20da46
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|