summaryrefslogtreecommitdiffstats
path: root/test
AgeCommit message (Collapse)AuthorFilesLines
2023-10-26tests: Added bufmon plugin testadrianvillin1-0/+130
Coverage increased from 35% to 94% Type: test Change-Id: I9a54a58bf53b29a771a93ce03998e95fbcd518eb Signed-off-by: adrianvillin <avillin@cisco.com>
2023-10-25tests: Added mdata plugin testadrianvillin1-0/+123
Coverage increased from 54% to 92% Type: test Change-Id: Ibb26f2b8989c5bb2826190c961bffe2c21c3f9a2 Signed-off-by: adrianvillin <avillin@cisco.com>
2023-10-25fib: only update glean for interface if necessaryMatthew Smith1-9/+12
Type: improvement If an interface address is added, the glean adjacency for it's covering prefix is updated with that address. In the case of multiple addresses within the same prefix being added, the most recently added one will end up being used as the sender protocol address for ARP requests. Similar behavior occurs when an interface address is deleted. The glean adjacency is updated to some appropriate entry under it's covering prefix. If there were multiple interface addresses configured, we may update the address on the adjacency even though the address currently in use is not the one being deleted. Add a new value PROVIDES_GLEAN to fib_entry_src_flag_t. The flag identifies whether a source interface entry is being used as the address for the glean adjacency for the covering prefix. Update logic so that the glean is only updated on adding an interface address if there is not already a sibling entry in use which has the flag set. Also, only update the glean on deleting an interface address if the address being deleted has the flag set. Also update unit test which validates expected behavior in the case where multiple addresses within a prefix are configured on an interface. Signed-off-by: Matthew Smith <mgsmith@netgate.com> Change-Id: I7d918b8dd703735b20ec76e0a60af6d7e571b766
2023-10-25tests: Added STN plugin test to improve coverage.adrianvillin1-0/+63
Type: test Change-Id: I30dfaed684e1f808089bb8eb301486434425ccd7 Signed-off-by: adrianvillin <avillin@cisco.com>
2023-10-25tests: Added a simple Snort plugin test to increase coverage.adrianvillin1-0/+53
Type: test Change-Id: I96ec8b4347210672bc587407ab2fd0f0305ea486 Signed-off-by: adrianvillin <avillin@cisco.com>
2023-10-18flowprobe: fix sending L4 fields in L2 template and flowsAlexander Chernavin1-7/+40
Currently, when L2 and L4 recording is enabled on the L2 datapath, the L2 template will contain L4 fields and L2 flows will be exported with those fields always set to zero. With this fix, when L4 recording is enabled, add L4 fields to templates other than the L2 template (i.e. to the IP4, IP6, L2_IP4, and L2_IP6 templates). And export L2 flows without L4 fields. Also, cover that case in the tests. Type: fix Change-Id: Id5ed8b99af5634fb9d5c6e695203344782fdac01 Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
2023-10-16ip-neighbor: do not use sas to determine NS source addressOle Troan3-3/+3
Using the source address selection algorithm to determine the best source of an NS for address resolution risks incompatible behavior. It may choose a source address that is off-link to the other host. Which may drop it. A safer approach is to always use the link-local address as the SA. It's recommended to pick a source that an application will later use, as VPP is mostly a router, that rarely applies. And regardlessly we have no mechanism to signal from an application that triggered address resolutiuon what source address it intends to use. Type: fix Change-Id: I3c5de66e41505f3682767706ef1195a20e4f0e54 Signed-off-by: Ole Troan <otroan@employees.org>
2023-10-16flowprobe: fix corrupted packets sent after feature disablingAlexander Chernavin1-0/+38
When IPFIX flow record generation is enabled on an interface and the active timer is set, flows will be saved and then exported according to the active and passive timers. If then disable the feature on the interface, the flow entries currently saved will remain in the state tables. They will gradually expire and be exported. The problem is that the template for them has already been removed. And they will be sent with zero template ID which will make them unreadable. A similar problem will occur if feature settings are "changed" on the interface - i.e. disable the feature and re-enable it with different settings (e.g. set a different datapath). The remaining flows that correspond to the previous feature settings will be eventually sent either with zero template ID or with template ID that corresponds to the current feature settings on the interface (and look like garbage data). With this fix, flush the current buffers before template removal and clear the remaining flows of the interface during feature disabling. Type: fix Change-Id: I1e57db06adfdd3a02fed1a6a89b5418f85a35e16 Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
2023-10-16nat: add ipfix rate-limiter for nat44-ed, nat44-ei and nat64Vladislav Grishenko3-15/+29
This prevents ipfix flood with the repeating events and allows to enable nat64 max_session and max_bibs events. Also fix wrong endian for det44 and nat64 ipfix tests, now should be fine with extended tests enabled. Max session per user event @ nat44-ei requires more precise rate limiter per user address, probably with sparse vec, not handled. Type: improvement Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru> Change-Id: Ib20cc1ee3f81e7acc88a415fe83b4e2deae2a836
2023-10-16npt66: icmp6 alg to handle icmp6 error messagesOle Troan1-19/+57
Support rewriting the inner packet for ICMP6 error messages. Type: feature Change-Id: I7e11f53626037075a23310f1cb7e673b0cb52843 Signed-off-by: Ole Troan <otroan@employees.org>
2023-10-13ethernet: run callbacks for subifs too when mac changesAlexander Chernavin1-3/+103
When MAC address changes for an interface, address change callbacks are executed for it. In turn adjacencies register a callback for MAC address changes to be able to update their rewrite strings accordingly. Subinterfaces inherit MAC address from the parent interface. When MAC address of the parent interface changes, it also implies MAC address change for its subinterfaces. The problem is that this is currently not considered when address change callbacks are executed. After MAC address change on the parent interface, packets sent from subinterfaces might have wrong source MAC address as the result of stale adjacencies. For example, ARP messages might be sent with the wrong (previous) MAC address and address resolution will fail. With this fix, when address change callbacks are executed for an interface, they will be also executed for its subinterfaces. And adjacencies will be able to update accordingly. Type: fix Change-Id: I87349698c10b9c3a31a28c0287e6dc711d9413a2 Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
2023-10-12flowprobe: fix sending L2 flows using L2_IP6 templateAlexander Chernavin1-2/+68
Currently, L2 flows are exported using L2_IP6 template if L3 or L4 recording is enabled on L2 datapath. That occurs because during feature enable, L2 template is added and its ID is not saved immediately. Then L2_IP4 and L2_IP6 templates are added overwriting "template_id" each time. And in the end, the current value of "template_id" is saved for L2 template. The problem is that "template_id" at that point contains the ID of L2_IP6 template. With this fix, save the template ID immediately after adding a template for all variants (datapaths). Also, cover the case with a test. Type: fix Change-Id: Id27288043b3b8f0e89e77f45ae9a01fa7439e20e Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
2023-10-06cnat: add flow hash config to cnat translationhedi bouattour1-2/+90
Type: feature this patch adds a hash config field to cnat translation to use it in load balancing instead of always using default one Change-Id: I5b79642ca8b365b5dcc06664f6c100a9d3830a29 Signed-off-by: hedi bouattour <hedibouattour2010@gmail.com>
2023-10-03build: add ability to disable some plugins from packaging and testsAndrew Yourtchenko9-1/+41
When custom-packaging the VPP artifacts, it can be useful to exclude some of the core plugins from packaging/testing, for some reasons. A removal of a plugin(s) from the worktree needs to be tracked as a separate change, and thus is tricky from the maintenance point of view. This change adds the ability to "pretend they do not exist" - plugins which are added to the comma-separated environment variable "VPP_EXCLUDED_PLUGINS" will not be added to the build process and not packaged. The tests do not have the 1:1 relationship as plugins, so they might need to be modified separately. This change includes some of these modifications as an example. Type: feature Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> Change-Id: Id31562d00a01ced1acbb4996a633517cbd6f09d8
2023-09-26ping: Simple binary API for running ping based on eventsNikitaSkrynnik1-0/+34
Type: improvement Change-Id: I02846a2420637470cb0f9472c86471b6a3421a75 Signed-off-by: NikitaSkrynnik <nikita.skrynnik@xored.com>
2023-09-24fib: Don't use an address from an attached prefix when sending ARP requests.Neale Ranns1-0/+22
Change-Id: I4c3144794dd0bd7de6150929e53f6d305c496b17 Type: fix Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I7b0c2c2dec5e867970599b8f2f2da17f2ff0b17c
2023-09-20tests: remove unsupported qemu featureNaveen Joy1-1/+1
pretty=on|off has been removed from qemu and its presence causes VM boot up issues. Type: fix Change-Id: I4a9f15dba5015e81fbd32278b1c74b2606c32c8f Signed-off-by: Naveen Joy <najoy@cisco.com>
2023-09-13nat: fix nat44_ed set_session_limit crashVladislav Grishenko1-2/+5
Setting session limit should return error for unknown fib. Optimize max_translations_per_fib expanding and drop unnecessary trailing fib entry. Type: fix Change-Id: Ie7d2b363ade48f53598faa617a49cce7b2db6400 Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
2023-09-13quic: fix quic sessions state updatesFlorin Coras1-0/+1
Session state cannot be updated after async notification event is generated for app. Instead, make sure quic sessions that accept new streams are switched to listening state only on accept. Type: fix Fixes: 0242d30 Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I9663ccadbea99d555ad49e871f7dff897239dc84
2023-09-06nat: improve nat44-ed outside address distributionVladislav Grishenko1-13/+12
Use client address hash to pick the first outside address instead of just address high octet, becasue it may denegerate into stable 10/172/192, depending on nat address count. Fix outside address distribution test to acually test the distribution, not the algo, so previous distribution will fail with 65 nat addresses and 100 clients: FAIL: Outside address distribution based on source address Traceback (most recent call last): File ".../test/test_nat44_ed.py", line 2048, in test_outside_address_distribution msg="Bad outside address distribution") AssertionError: 156.25 not less than 0.33 : Bad outside address distribution Type: improvement Change-Id: I604b1294422f20d211db5614c47559557a78a193 Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
2023-09-05npt66: make plugin default disabledOle Troan1-0/+4
Plugin is still in experimental state. No reason why it needs to be default enabled. Type: fix Change-Id: Ibf1810215d4c8079a068bfc60aa7dd49306ee4e4 Signed-off-by: Ole Troan <otroan@employees.org>
2023-09-04npt66: checksum applied to src address instead of dst address on rxOle Troan1-18/+27
Applied the checksum delta to the source address instead of the destination address in the RX direction. Cleaned up tests a little. Type: fix Change-Id: I871f3448365587e5319dfbca6ea356935321ff9b Signed-off-by: Ole Troan <otroan@employees.org>
2023-09-04tracenode: filtering featureMaxime Peim1-17/+199
In order to be able to filter on encapsulated packet, a new node has been added to the ip4/6-unicast arcs. Type: feature Change-Id: I1e8ee05bc6d0fce20cadd8319c81bab260c17d21 Signed-off-by: Maxime Peim <mpeim@cisco.com>
2023-09-01map: test fix feature disablingMaxime Peim1-0/+5
Upon test teardown, MAP features were not disabled, potentially leading packets to be treated by the wrong node. Type: test Change-Id: I0c1c614318d1308f825c5cc0bf95688e92f6d00a Signed-off-by: Maxime Peim <mpeim@cisco.com>
2023-08-25npt66: network prefix translation for ipv6Ole Troan1-0/+89
This is the initial commit of a NPTv6 (RFC6296) implementation for VPP. It's restricted to a single internal to external binding and runs as an output/input feature on the egress interface. Type: feature Change-Id: I0e3497af97f1ebd99377b84dbf599ecea935ca24 Signed-off-by: Ole Troan <otroan@employees.org>
2023-08-17tests: more descriptive error messageKlement Sekera2-2/+10
Type: improvement Change-Id: Icf8a5dc711e1e11ec919b515d7af2f487a1c04c2 Signed-off-by: Klement Sekera <klement.sekera@gmail.com> Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2023-08-16tests docs: update python3 venv packagesDave Wallace28-450/+576
- Package update performed by 1. updating pip, pip-tools, setuptools 2. 'make test-refresh-deps' on ubuntu 22.04 3. fixing 'make test' and 'make docs' issues on ubuntu 22.04 4. 'make test-refresh-deps' on ubuntu 20.04 - Add dependency for 'make test-refresh-deps' to insure python venv is set up. - Update of python formatter, black, caused reformating of 41 python code files. Type: make Change-Id: I7cafdf4b5189065ac57cb6b254937f6e0897a924 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2023-08-11tests: filter coverage report outputDave Wallace1-0/+3
- Remove test code & non-vpp code from coverage report - Remove driver/hardware vpp code which cannot be tested in 'make test' from coverage report Type: fix Change-Id: I04b50c14bc3437b845f2afafae47297189e61e3f Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2023-08-08tests: fix setting gcov flag for test-cov targetDave Wallace1-1/+1
Type: fix Change-Id: I3c663babe4f32f5d2870265336b5d272cc029ce7 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2023-08-08ipsec: add support for RFC-4543 ENCR_NULL_AUTH_AES_GMACBenoît Ganne3-24/+186
Type: improvement Change-Id: I830f7a2ea3ac0aff5185698b9fa7a278c45116b0 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2023-07-21tests: Add checksum offload interface testsNaveen Joy2-0/+42
Type: test Change-Id: I6edc8858b802d3d32159d71c1e867a06cc1025d5 Signed-off-by: Naveen Joy <najoy@cisco.com>
2023-07-13lb: Fix src_ip_sticky evaluation bug in per-port-vip case.Nobuhiro MIKI1-0/+32
Before this fix, the src_ip_sticky flag was passed as an argument to the lb_node_get_hash function, which computes a hash value for a packet. However, in per-port-vip case, the value of src_ip_sticky flag may be different for each port number. As a result, the value is the same for all port numbers, even though it is a per-port-vip case. This commit fixes the src_ip_sticky evaluation by delaying it until the packet is received, so that the correct value is obtained. Also, the unit test case has been enhanced for this bug fix. The steps to reproduce this bug are described below: https://lists.fd.io/g/vpp-dev/message/23248 Type: fix Fixes: 613e6dc0bf92 ("lb: add source ip based sticky load balancing") Change-Id: I483492b214a1768e7a21fd86edd5151b3c46528b Signed-off-by: Nobuhiro MIKI <nmiki@yahoo-corp.jp>
2023-06-29ip-neighbor: add api for getting neighbor db configAlexander Chernavin1-0/+30
There is an API call to change neighbor database configuration (i.e. limit on peer number, aging, and recycling). With this change, make getting current values of these settings available via the API. Type: improvement Change-Id: Ie9394e086b68cf9b28ad98dea162f203f8043cbb Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
2023-06-23ipsec: manually binding an SA to a workerMaxime Peim1-0/+38
An SA is normally bound to the first thread using it. However, one could want to manually bind an SA to a specific worker. Type: improvement Signed-off-by: Maxime Peim <mpeim@cisco.com> Change-Id: I05cbbf753e44a01d9964ee47812c964db9bbb488
2023-06-22tests docs: fix lcov code coverage report generationDave Wallace1-14/+34
- Updated/rebased version of https://gerrit.fd.io/r/c/vpp/+/34199 Type: test Change-Id: I43913ecfd11a4578bdb10c4be76253fe38d57976 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com> Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2023-06-21tests: do not run qemu interface tests if the environment does not allow itAndrew Yourtchenko3-2/+39
cdf73b973181ff4c67147900408216e37bae897a has added the qemu tests as part of the default test run, which results in "make test" failure in more restricted environments which do not allow the namespace creation. Add a config flag to skip those tests, and skip them if the namespace creation fails. Type: test Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> Change-Id: Ie631f7fb2a80864f77c79619eba4a43712e950e5
2023-06-15tests: Run interface tests as a regular testDave Wallace1-1/+0
Type: test Change-Id: I5cf5a0e6437b274e565066f1012d7225c62b87a8 Signed-off-by: Naveen Joy <najoy@cisco.com>
2023-06-02wireguard: add support for chained buffersAlexander Chernavin1-0/+227
Type: feature With this change, packets that are larger than a single buffer can fit will be able to be sent and received over a Wireguard tunnel. Also, cover this with tests. Signed-off-by: Alexander Chernavin <achernavin@netgate.com> Change-Id: Ifaf7325676d728580097bc389b51a9be39e44d88
2023-06-01crypto: make crypto-dispatch node working in adaptive modeXiaoming Jiang1-5/+0
This patch can make crypto dispatch node adaptively switching between pooling and interrupt mode, and improve vpp overall performance. Type: improvement Signed-off-by: Xiaoming Jiang <jiangxiaoming@outlook.com> Change-Id: I845ed1d29ba9f3c507ea95a337f6dca7f8d6e24e
2023-05-25udp: fix local port reuse checkFlorin Coras1-0/+1
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I323946f7838507110c663f5a904399a74fc76691
2023-05-20tests: support for expected failuresKlement Sekera4-156/+204
- Add support for @unittest.expectedFailure decorator. Type: improvement Signed-off-by: Klement Sekera <klement.sekera@gmail.com> Change-Id: I761751cda505e962225dc680b97c1fffa96f5176 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2023-05-20tests: enhance counter comparison error messageKlement Sekera2-4/+8
- Make error message more human readable. Type: improvement Signed-off-by: Klement Sekera <klement.sekera@gmail.com> Change-Id: Iefc276b3a85ff82b927028a72bb91ed87ebd04ba Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2023-05-19tests: refactor extra_vpp_punt_configKlement Sekera6-11/+11
Rename extra_vpp_punt_config to a more generic name extra_vpp_config to better fit its purpose. It's fit for general use and already used that way by quic and vcl tests anyway. Type: refactor Signed-off-by: Klement Sekera <klement.sekera@gmail.com> Change-Id: Ib0a5789b0dbb3a8c3cae654dea4e32ac5e56dd41
2023-05-16ip_session_redirect: add session redirect pluginBenoît Ganne1-0/+229
This feature enables the use of the classifier and ip-in-out-acl nodes to redirect matching sessions via arbitrary fib paths instead of relying on additional VRFs. Type: feature Change-Id: Ia59d35481c2555aec96c806b62bf29671abb295a Signed-off-by: Benoît Ganne <bganne@cisco.com>
2023-04-28session: update due to clib_socket refactoringNathan Skrzypczak6-14/+14
After the clib_socket_init syntax changed, the behavior of VCL socket creation was broken. This patch introduces app_namespace_add_del_v4 to address the behavioral change. Type: refactor Change-Id: Ice016bdb372233fd3317f166d45625e086e9b4df Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2023-04-25tests: fix parallel runs skipping some testsKlement Sekera1-3/+5
Fix corner case when a test would be skipped if it was not possible to start it due to insufficient cpus available in the middle of the loop. Type: fix Change-Id: Ie4580685ff55688375d649d7009131d9fe1e4f33 Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
2023-04-25tests: fix test-help formattingKlement Sekera1-1/+1
Type: improvement Change-Id: Ib7703359b998456bff88caee88c2734c7724bc09 Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
2023-04-25tests: support multiple filter expressionsKlement Sekera3-64/+202
Support multiple comma-delimited filter expressions, e.g. to run both bfd and ip4 tests, it's now possible to do: make test TEST=bfd,ip4 Same goes for wildcards, e.g.: make test TEST=bfd,..test_longest_prefix_match,..test_icmp_error Type: improvement Change-Id: I0cceaa443cb612dca955f301c7407959f9a71a6e Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
2023-04-12ip: punt socket - take the tags in Ethernet header into considerationAndrew Yourtchenko1-0/+82
The punt socket code rewinds the current_data pointer by sizeof (ethernet_header_t), which is incorrect if the header is tagged - resulting in truncated destination MAC address. Use ethernet_buffer_header_size() instead, which takes tags into account. Also add the unittest that verifies the issue and the fix. Type: fix Change-Id: I6352a174df144ca1e4230390c126f4b698724ebc Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2023-03-31ip: support flow-hash gtpv1teidTakeru Hayasaka1-1/+45
support with GTPv1 TEID added to the flow hash. This can able to ECMP to PGW and parallelization. Type: feature Change-Id: I6f758579027caf6123831ef2db7afe17e424a6eb Signed-off-by: Takeru Hayasaka <hayatake396@gmail.com>