summaryrefslogtreecommitdiffstats
path: root/test
AgeCommit message (Collapse)AuthorFilesLines
2017-03-07CGN: Deterministic NAT (VPP-623)Matus Fabian2-0/+100
Inside user is statically mapped to a set of outside ports. Support endpoint dependent mapping to deal with overloading of the outside ports. Change-Id: I8014438744597a976f8ae459283e8b91f63b7f72 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-03-07Add setting of tenant VRF id for SNAT addresses (VPP-641)Juraj Sloboda2-3/+74
Change-Id: I9c0bb35ba16e04206ac481495f6638d3763754a1 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2017-03-06make test: reset object registry if vpp diesKlement Sekera2-2/+9
Change-Id: If0e30837e07a21f3912676f5147cb242d3d2b235 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-03-06make test: tell vpp to set coredump sizeKlement Sekera2-6/+14
Unless overridden by COREDUMP_SIZE env variable, tell VPP to set coredump size to unlimited, otherwise use $COREDUMP_SIZE as the argument. Change-Id: Ia2a6508207c66a171b33d272c820b1deb4a83e82 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-03-06make test: don't run if other vpp process runsKlement Sekera1-2/+22
Check if there are existing vpp processes before running the test suite and refuse to run if there are. This prevents the removal of other test suite temporary files and also makes sure that if the machine is loaded by (zombie) vpp processes, interactive tests (like bfd) won't fail. Change-Id: I88a74098188cb3f51966de5db19d7f80f39e51e2 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-03-03IPv6 RA improvementsNeale Ranns4-6/+251
1) tests for RA options 2) memleaks deleteing a ip6_radv_info_t 3) MLD prefix code refactoring Change-Id: I34db103994bd8fbdbbec50b202d72770dd145681 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-03Changing the IP table for an interface is an error if the interface already ↵Neale Ranns6-4/+25
has an address configured (VPP-601) Change-Id: I311fc264f73dd3b2b3ce9d7d1c33cd0515b36c4a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-03python API: work towards python/vpp api separationKlement Sekera1-6/+6
This change improves vpp_papi behaviour by introducing alternate way of calling vpp APIs. The common code is the same: vpp = VPP(...) vpp.connect(...) Calling VPP API is different, instead of deprecated: vpp.show_version() # deprecated one should write vpp.api.show_version() this allows VPP messages like "connect" and "disconnect" to be used, once the old API is dropped (in 17.07). Also part of this patch is a check for name conflict, to prevent VPP object overwriting its own functionality with generated code based on json files. Change-Id: I22e573b6a45f8b2a1f0340c5c2597c194fe42ca4 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-03-02SNAT: user's dump and session dump of a certain snat user.magalik2-0/+82
Change-Id: If75a35dbdcb43c1ce0128b8649f2ca3970d3fff5 Signed-off-by: Martin <magalik@cisco.com>
2017-03-02Remove the unused VRF ID parameter from the IP neighbour Add/Del APINeale Ranns4-10/+7
Change-Id: Icf0d72f6af1f98c86f78e586c354515ac69804aa Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-02BFD: command line interfaceKlement Sekera4-23/+578
Implement command line interface to the BFD binary APIs. Add corresponding unit tests. Change-Id: Ia0542d0bc4c8d78e6f7b777a08fd94ebfe4d524f Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-27[Proxy] ARP testsNeale Ranns5-0/+587
Change-Id: I40d6d763b55a26cdee0afef85d1acdd19dd10dd6 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-26BFD: echo functionKlement Sekera4-49/+455
Change-Id: Ib1e301d62b687d4e42434239e7cd412065c28da0 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-25Enable tests with VRF resetJan Gelety1-37/+73
- needed to filter out ICMPv6 Neighbor Discovery - Neighbor Advertisement packets - needed to reset routes of reset VRFs learned from ICMPv6 Neighbor Discovery - Neighbor Advertisement packets after run_verify_test() Change-Id: I8238d8f73428d511ab68ab7765d99ce7dc3a6633 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2017-02-23Remove prints from LISP testFilip Tehlar1-5/+0
Change-Id: I2776e0a0661794b1c0076519b08807080a1282fb Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-02-16Consolidate DHCP v4 and V6 implementation. No functional change intendedNeale Ranns1-1/+1
The DHCP proxy and VSS information maintained by VPP is the same for v4 and v6, so we can manage this state using the same code. Packet handling is cleary different, so this is kept separate. Change-Id: I10f10cc1f7f19debcd4c4b099c6de64e56bb0c69 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-21dhcp: multiple additionsNeale Ranns2-86/+86
DHCP additions: 1) DHCPv4 will only relay a message back to the client, if the Option82 information is present. So make this the default. 2) It is no longer possible to select via the API to "insert circuit ID" - since this is now default 3) Remove the version 2 API since it's now the same as version 1. 4) Adding the VSS option is now conditional only on the presence of VSS config (not the 'insert' option in the set API) 5) DHCP proxy dump via API Change-Id: Ia7271ba8c1d4dbf34a02c401d268ccfbb1b74f17 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-21Add basic 4o4 LISP unit testFilip Tehlar5-1/+646
Change-Id: I2d812153d7afe7980346382b525af89b3c47e796 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-02-21test: ip6 vrf instances multi-context test (CSIT-497)Jan Gelety4-7/+424
- add/delete IPv6 VRF instances and verify results by parsing output of ip6_fib_dump API command and by traffic - small changes in assert_nothing_captured and get_capture to get logged unexpected packets Change-Id: I32207447be2df942e335aa9890ff52fb88e46597 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2017-02-20Python test IP and MPLS objects conform to infra.Neale Ranns6-197/+280
Add IP[46] MFIB dump. Change-Id: I4a2821f65e67a5416b291e4912c84f64989883b8 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-19make test: save + dump VPP api trace log; VPP-640Dave Wallace1-0/+11
Change-Id: I20aacc927f2b04f42b0a7220c4283560b4d2a359 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2017-02-17BFD: put session admin-up/admin-downKlement Sekera2-8/+45
Change-Id: I7d8889dce8495607106593ad83320c9af0f2fa07 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-17Fix handling of ping to SNAT out interfaceJuraj Sloboda1-2/+30
Change-Id: I322bfb3469b3d0d5b0cac39a6c2dba1c6f83ce3d Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2017-02-16Add handling of ICMP error packets in SNAT (VPP-629)Juraj Sloboda1-8/+187
Change-Id: I8d2022b7cb3ef3da736c085bccbb5b9c057a8d76 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2017-02-15SNAT: add static mappings with unresolved external interface address to ↵Matus Fabian1-2/+5
snat_static_mapping_dump Change-Id: Ib560b397700fe058ad1e2970989d98e3debf54aa Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-02-15BFD: loop back echo packetsKlement Sekera3-20/+106
Change-Id: I772b63ac25ebfccaff9ab9d8d0b1445e85f21df7 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-14BFD: respect remote demand modeKlement Sekera2-339/+544
Change-Id: I5063d31f5305c848043afb32fcacff6e61aed79f Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-14make test: improve stabilityKlement Sekera6-88/+149
Disable automatic garbage collection and run it manually before running each test case to minimize stalls. Improve vpp subprocess cleanup. Reduce helper thread count to one and properly clean that thread once it's not needed. Change-Id: I3ea78ed9628552b5ef3ff29cc7bcf2d3fc42f2c3 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-09make test: work around scapy truncated packetsKlement Sekera2-0/+65
Under stress, it's possible to hit a race condition, when the packet header is fully written to pcap, but not all packet data - yet. Scapy is stupid enough to: 1. not detect and report this error, truncating the packet instead 2. continue munching more data from wrong offset The work around is to scan the file ahead, parse the packet header, figure out how much data we need, wait for the file to be big enough, then restore the file position back to where it was and finally let scapy parse the packet. Change-Id: I9fc71d3ebdc62ecab6c90b90f177d0eaeb09b8bb Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-08make test: BFD tests speedupKlement Sekera1-2/+4
Change-Id: I0b3064a311f28ebf7cd9db0a59cb04c7c25c9d58 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-08BFD: modify session parametersKlement Sekera4-13/+187
Change-Id: I666e5c0cc71a3693640960c93cdd1907f84fbe23 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-06make test: improve test filteringKlement Sekera2-4/+80
Implement fine-grained test filtering by supporting more complicated filters beside the original file name suffix filter. Change-Id: If5a166d08cffe8c58cc6cf174e6df861c34dbaa6 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-06make test: fix dependenciesKlement Sekera1-2/+2
checkstyle - doesn't need scapy/pexpect, remove it doc - scapy wasn't patched properly, fix it Change-Id: I65202cb14edeb239d21ce10f17d9b4fccce43d62 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-05Test checksyle for IP mcast testsNeale Ranns2-3/+3
Change-Id: I20b61b7e63f74b4656d84717633e06646514c5eb Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-03pep8 compliance for test_ip6.pyNeale Ranns1-3/+3
Change-Id: If29a1eba3e7056903978de782c062589bec0137e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-03Next node frame over-flow after replicationNeale Ranns1-4/+12
Change-Id: I25077dd0739787de4f7512e5a70a62e8c34c28e4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-03SNAT: Port allocation per protocolMatus Fabian2-9/+23
Ports are allocated per protocol (UDP, TCP, ICMP) 1:1 NAT with port is configured for specific protocol Change-Id: I37ae5eed3715b223d0620d4fdaed7a482bb7a834 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-02-02BFD: SHA1 authenticationKlement Sekera4-112/+978
Add authentication support to BFD feature. Out of three existing authentication types, implement SHA1 (sole RFC requirement). Simple password is insecure and MD5 is discouraged by the RFC, so ignore those. Add/change APIs to allow configuring BFD authentication keys and their usage with BFD sessions. Change-Id: Ifb0fb5b19c2e72196d84c1cde919bd4c074ea415 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-01-31SNAT: Add outbound addresses to FIB (VPP-613)Matus Fabian1-4/+63
Add the external NAT address to the FIB as receive entries. This ensures that VPP will reply to ARP for these addresses and we don't need to enable proxy ARP on the outside interface. Change-Id: I1db153373c43fec4808845449a17085509ca588c Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-01-27IP Multicast FIB (mfib)Neale Ranns7-97/+823
- IPv[46] mfib tables with support for (*,G/m), (*,G) and (S,G) exact and longest prefix match - Replication represented via a new replicate DPO. - RPF configuration and data-plane checking - data-plane signals sent to listening control planes. The functions of multicast forwarding entries differ from their unicast conterparts, so we introduce a new mfib_table_t and mfib_entry_t objects. However, we re-use the fib_path_list to resolve and build the entry's output list. the fib_path_list provides the service to construct a replicate DPO for multicast. 'make tests' is added to with two new suites; TEST=mfib, this is invocation of the CLI command 'test mfib' which deals with many path add/remove, flag set/unset scenarios, TEST=ip-mcast, data-plane forwarding tests. Updated applications to use the new MIFB functions; - IPv6 NS/RA. - DHCPv6 unit tests for these are undated accordingly. Change-Id: I49ec37b01f1b170335a5697541c8fd30e6d3a961 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-01-27Fix make test scapy python patch issue, VPP-615Dave Wallace1-0/+1
Change-Id: I1e6798905f0049c793224a2c880f3b2cfadcf1e7 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2017-01-27make-test: Add numbering to chapters' titlesTibor2-1/+2
Change-Id: I1e2aedba85caf903dd7a721841afe240a9791cac Signed-off-by: Tibor <tifrank@cisco.com>
2017-01-27make test: improve documentation generationKlement Sekera4-430/+432
Refactor the text to work around sphinx bug to show a proper table of contents. Change-Id: I546656ef77a95637ad7c6bf239f26262a4f306dc Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-01-27Add sphinx read the doc theme.Tibor2-2/+3
Change-Id: Iade7c42081378bf211b81ad29b2898518442d2ff Signed-off-by: Tibor <tifrank@cisco.com>
2017-01-27ipv4 vrf test doc cleaningJan Gelety1-6/+6
Change-Id: I0d3b47ce3c029d2ea01f9ff88a541affcbfd70db Signed-off-by: Jan Gelety <jgelety@cisco.com>
2017-01-26DHCPv[46] proxy testsNeale Ranns4-18/+882
Change-Id: I6aaf9c602cd515ed9d4416d286f9191d048c1a87 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-01-25make test: elegantly handle expected API failuresKlement Sekera2-13/+42
Allow writing simple code to expect API failure when needed: with self.vapi.expect_negative_api_retval(): do_api_call() # expected to return negative retval in response Change-Id: Id58d91d9ce38d20ad6ff7a43a6897e79ffbd23bf Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-01-25test adding and removing shared mcast dst tunnelsEyal Bari1-8/+39
Adds and delete 2000 multicast vxlan tunnels sharing group address to test mcast tunnel ref count code as part of the stability stage (before starting traffic tests) Change-Id: Ic50cedf80471e14431feb493104eff5ea7d5d429 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-01-25SNAT: static mappings for dhcp addressed interfaces (VPP-590)Matus Fabian2-3/+35
updated API added test Change-Id: I3f6017ecf09b924cb320c1b5f323cd33f7a37447 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-01-23SNAT: Multiple inside interfaces (VPP-447)Matus Fabian1-25/+86
NAT only packets aimed at outside interface and in case of hairpinning Change-Id: Ida371380fce664b9434ca5ddd2369c980ff26beb Signed-off-by: Matus Fabian <matfabia@cisco.com>