summaryrefslogtreecommitdiffstats
path: root/test
AgeCommit message (Collapse)AuthorFilesLines
2018-12-10test/framework.py: change logger to return 'e' format.Paul Vinciguerra1-15/+13
* When the framework logs an unexpected sleep time, display the units in the same format. Typically, it has been returning a float and an 'e'. ex. unexpected time.sleep() result - slept for 0.000107049942017s instead of ~4.88758087158e-05s! * Defer logger interpolation. Change-Id: I543ad6d41c7f263d61615341437f80973c0017de Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-12-10Test framework: StringIO fixes for Python3Ole Troan22-124/+117
Add 2/3 support to binarytomac and mactobinary and move to vpp_mac.py Change-Id: I3dc7e4a24486aee22140c781aae7e44e58935877 Signed-off-by: Ole Troan <ot@cisco.com>
2018-12-07FIB recusrion loop checks traverse midchain adjacenciesNeale Ranns1-0/+61
if a tunnel's destination address is reachable through the tunnel (see example config belwo) then search for and detect a recursion loop and don't stack the adjacency. Otherwise this results in a nasty surprise. DBGvpp# loop cre DBGvpp# set int state loop0 up DBGvpp# set int ip addr loop0 10.0.0.1/24 DBGvpp# create gre tunnel src 10.0.0.1 dst 1.1.1.1 DBGvpp# set int state gre0 up DBGvpp# set int unnum gre0 use loop0 DBGvpp# ip route 1.1.1.1/32 via gre0 DBGvpp# sh ip fib 1.1.1.1 ipv4-VRF:0, fib_index:0, flow hash:[src dst sport dport proto ] locks:[src:plugin-hi:2, src:default-route:1, ] 1.1.1.1/32 fib:0 index:11 locks:4 <<< this is entry #11 src:CLI refs:1 entry-flags:attached, src-flags:added,contributing,active, path-list:[14] locks:2 flags:shared,looped, uPRF-list:12 len:1 itfs:[2, ] path:[14] pl-index:14 ip4 weight=1 pref=0 attached-nexthop: oper-flags:recursive-loop,resolved, cfg-flags:attached, 1.1.1.1 gre0 (p2p) [@0]: ipv4 via 0.0.0.0 gre0: mtu:9000 4500000000000000fe2fb0cc0a0000010101010100000800 stacked-on entry:11: <<<< and the midchain forwards via entry #11 [@2]: dpo-drop ip4 src:recursive-resolution refs:1 src-flags:added, cover:-1 forwarding: unicast-ip4-chain [@0]: dpo-load-balance: [proto:ip4 index:13 buckets:1 uRPF:12 to:[0:0]] [0] [@6]: ipv4 via 0.0.0.0 gre0: mtu:9000 4500000000000000fe2fb0cc0a0000010101010100000800 stacked-on entry:11: [@2]: dpo-drop ip4 DBGvpp# sh adj 1 [@1] ipv4 via 0.0.0.0 gre0: mtu:9000 4500000000000000fe2fb0cc0a0000010101010100000800 stacked-on entry:11: [@2]: dpo-drop ip4 flags:midchain-ip-stack midchain-looped <<<<< this is a loop counts:[0:0] locks:4 delegates: children: {path:14} Change-Id: I39b82bd1ea439be4611c88b130d40289fa0c1b59 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-12-07VPP-1506: dump local punts and registered punt socketsPavel Kotucek3-8/+333
Change-Id: If7835e9b80ec9402404bfc8d271eb11a10ef992b Signed-off-by: Pavel Kotucek <pavel.kotucek@pantheon.tech>
2018-12-07Test reader thread hardeningjuraj.linkes1-103/+111
The test reader thread could get stuck in case an unexpected Exception was raised during test runs in parent thread. Catch the Exception, close the thread and raise the Exception to avoid this. Change-Id: I3a9298d593c334d96d04b6207d604b684572a2ac Signed-off-by: juraj.linkes <juraj.linkes@pantheon.tech>
2018-12-06Fix L2BD arp termination Test CasePaul Vinciguerra1-6/+2
This patch is a followup to: https://gerrit.fd.io/r/#/c/16307/ which is currently causing ubuntu1804 to complain. See: https://logs.fd.io/production/vex-yul-rot-jenkins-1/vpp-beta-verify-master-ubuntu1804/3837/console-timestamp.log.gz s/RuntimeError/ for details. ============================================================================== L2BD arp termination Test Case ============================================================================== 12:02:21,850 Couldn't stat : /tmp/vpp-unittest-TestL2bdArpTerm-_h44qo/stats.sock L2BD arp term - add 5 hosts, verify arp responses OK L2BD arp term - delete 3 hosts, verify arp responses OK L2BD arp term - recreate BD1, readd 3 hosts, verify arp responses OK L2BD arp term - 2 IP4 addrs per host OK L2BD arp term - create and update 10 IP4-mac pairs OK L2BD arp/ND term - hosts with both ip4/ip6 OK L2BD ND term - Add and Del hosts, verify ND replies OK L2BD ND term - Add and update IP+mac, verify ND replies OK L2BD arp term - send garps, verify arp event reports OK L2BD arp term - send duplicate garps, verify suppression OK L2BD arp term - disable ip4 arp events,send garps, verify no events OK L2BD ND term - send NS packets verify reports OK L2BD ND term - send duplicate ns, verify suppression OK L2BD ND term - disable ip4 arp events,send ns, verify no events OK ============================================================================== TEST RESULTS: Scheduled tests: 14 Executed tests: 14 Passed tests: 14 ============================================================================== Test run was successful Change-Id: If66f22412f8aa36b183131cd22af4b3e7a20da46 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-12-06Rename VPP_TEST_FAILED_DIR to FAILED_DIRjuraj.linkes1-7/+7
15999 renamed VPP_TEST_FAILED_DIR, but not in all files. Fix this in the one remaining file. Change-Id: I159cdc86bfd5dd33af74256830873a8d081f1a73 Signed-off-by: juraj.linkes <juraj.linkes@pantheon.tech>
2018-12-06Skip failing ARM testcases for CIjuraj.linkes4-2/+21
There are a few tests that fail on ARM and thus we can't enable testing in CI. Skip the failing tests until they're fixed so that we catch new failures in CI (when we enable testing for the remaining tests). Change-Id: Ie896ef5c449ef965029633e38d317a8d5ac26352 Signed-off-by: juraj.linkes <juraj.linkes@pantheon.tech>
2018-12-06Test framework: fix import logic for sphynx.Paul Vinciguerra1-9/+6
* Simplify conditional import. Remove global variable. * Fix vpp_l2 import side effect. Change-Id: I3945cf2a0cf8844004af2cd636f92d73ddc60f93 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-12-06API: Change ip4_address and ip6_address to use type alias.Ole Troan7-52/+23
Change-Id: Id8669bbadd1d6b2054865a310a654e9b38d1667d Signed-off-by: Ole Troan <ot@cisco.com>
2018-12-05VPP-1508: Python3 compatible printPaul Vinciguerra6-24/+23
Change-Id: I7d2597f2a9589f2463e213da6ca67b1b7593095e Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-12-05VPP-1508 python3 tests: xrangePaul Vinciguerra2-31/+34
xrange is not supported. Use six.range. py27 runtests: commands[5] | stestr --test-path ./test run --slowest test_ip4 test_ip6 ============================================================================== IPv4 disabled ============================================================================== ============================================================================== ICMP Echo Test Case ============================================================================== {0} test.test_ip4.TestIPDisabled.test_ip_disabled [5.256819s] ... ok 07:24:41,902 Couldn't stat : /tmp/vpp-unittest-TestICMPEcho-hU4IsB/stats.sock {1} test.test_ip4.TestICMPEcho.test_icmp_echo [0.367035s] ... ok ============================================================================== IPv4 Deaggregate Routes ============================================================================== ============================================================================== IPv4 Input Exceptions ============================================================================== 07:24:47,314 Couldn't stat : /tmp/vpp-unittest-TestIPDeag-eE1VgC/stats.sock {1} test.test_ip4.TestIPDeag.test_ip_deag [5.895646s] ... ok {0} test.test_ip4.TestIPInput.test_ip_input [5.819001s] ... ok ============================================================================== IPv4 longest Prefix Match ... output truncated ... ============================== Failed 4 tests - output below: ============================== test.test_ip4.TestIPv4FibCrud.test_3_add_new_routes --------------------------------------------------- Captured traceback: ~~~~~~~~~~~~~~~~~~ Traceback (most recent call last): File "/vpp/test/test_ip4.py", line 509, in test_3_add_new_routes self.deleted_routes.remove(x) ValueError: list.remove(x): x not in list test.test_ip4.TestIPv4FibCrud.test_2_del_routes ----------------------------------------------- Captured traceback: ~~~~~~~~~~~~~~~~~~ Traceback (most recent call last): File "/vpp/test/test_ip4.py", line 478, in test_2_del_routes self.configured_routes.remove(x) ValueError: list.remove(x): x not in list test.test_ip4_vrf_multi_instance.TestIp4VrfMultiInst.test_ip4_vrf_03 -------------------------------------------------------------------- Captured traceback: ~~~~~~~~~~~~~~~~~~ Traceback (most recent call last): File "/vpp/test/test_ip4_vrf_multi_instance.py", line 465, in test_ip4_vrf_03 self.create_vrf_and_assign_interfaces(1) File "/vpp/test/test_ip4_vrf_multi_instance.py", line 189, in create_vrf_and_assign_interfaces pg_if.set_table_ip4(vrf_id) File "/vpp/test/vpp_interface.py", line 322, in set_table_ip4 self.sw_if_index, 0, self.ip4_table_id) File "/vpp/test/vpp_papi_provider.py", line 264, in sw_interface_set_table 'vrf_id': table_id}) File "/vpp/test/vpp_papi_provider.py", line 196, in api raise UnexpectedApiReturnValueError(msg) test.vpp_papi_provider.UnexpectedApiReturnValueError: API call failed, expected 0 return value instead of -114 in sw_interface_set_table_reply(_0=91, context=1007, retval=-114) test.test_ip4_vrf_multi_instance.TestIp4VrfMultiInst.test_ip4_vrf_02 -------------------------------------------------------------------- Captured traceback: ~~~~~~~~~~~~~~~~~~ Traceback (most recent call last): File "/vpp/test/test_ip4_vrf_multi_instance.py", line 445, in test_ip4_vrf_02 self.reset_vrf_and_remove_from_vrf_list(1) File "/vpp/test/test_ip4_vrf_multi_instance.py", line 208, in reset_vrf_and_remove_from_vrf_list self.vapi.reset_fib(vrf_id, is_ipv6=0) File "/vpp/test/vpp_papi_provider.py", line 1137, in reset_fib 'is_ipv6': is_ipv6, File "/vpp/test/vpp_papi_provider.py", line 196, in api raise UnexpectedApiReturnValueError(msg) test.vpp_papi_provider.UnexpectedApiReturnValueError: API call failed, expected 0 return value instead of -3 in reset_fib_reply(_0=259, context=1198, retval=-3) ====== Totals ====== Ran: 57 tests in 266.0000 sec. - Passed: 53 - Skipped: 0 - Expected Fail: 0 - Unexpected Success: 0 - Failed: 4 Sum of execute time for each test: 157.3925 sec. ============== Worker Balance ============== - Worker 0 (29 tests) => 0:03:52.608995 - Worker 1 (28 tests) => 0:04:08.615473 Test id Runtime (s) --------------------------------------------- ----------- test.test_ip_mcast.TestIPMcast.test_ip6_mcast 8.535 test.test_ip4.TestIPPunt.test_ip_punt 8.082 test.test_ip6.TestIP6Punt.test_ip_punt 6.582 test.test_ip6.TestIPDeag.test_ip_deag 6.175 test.test_ip6.TestIPv6.test_ns 6.171 test.test_ip4.TestIPDeag.test_ip_deag 5.896 test.test_ip6.TestIPv6.test_fib 5.846 test.test_ip4.TestIPInput.test_ip_input 5.819 test.test_ip6.TestIPv6.test_rs 5.737 test.test_ip4.TestIPv4.test_fib 5.267 ERROR: InvocationError for command '/vpp/.tox/py27/bin/stestr --test-path ./test run --slowest test_ip4 test_ip6' (exited with code 1) ______________________________________________________ summary ______________________________________________________ ERROR: py27: commands failed Change-Id: Id9f6ecb4897386f790d82ab908963e4971a3aac8 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-12-04vcl: test refactor and improvementsFlorin Coras1-264/+81
Change-Id: I92f415bf253d6e051ec9d94ebeb98f081b2a0293 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-12-02IPSEC-AH: anti-replay testingNeale Ranns4-30/+111
Change-Id: Ia5d45db73e4bdb32214ed4f365d5eec8e28115f3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-12-02vppinfra: c11 safe string functionsSteven1-0/+41
Add memcmp_s, strcmp_s, strncmp_s, strcpy_s, strncpy_s, strcat_s, strncat_s, strtok_s, strnlen_s, and strstr_s C11 safe string API. For migrating extant unsafe API, add also the corresponding macro version of each safe API, clib_memcmp, clib_strcmp, etc. In general, the benefits of the safe string APIs are to provide null pointer checks, add additional argument to specify the string length of the passed string rather than relying on the null terminated character, and src/dest overlap checking for the the string copy operations. The macro version of the API takes the same number of arguments as the unsafe API to provide easy migration. However, it does not usually provide the full aformentioned benefits. In some cases, it is necessary to move to the safe API rather than using the macro in order to avoid some unpredictable problems such as accessing memory beyond what it is intended due to the lack of the passed string length. dbarach: add a "make test" vector, and a doxygen file header cookie. Change-Id: I5cd79b8928dcf76a79bf3f0b8cbc1a8f24942f4c Signed-off-by: Steven <sluong@cisco.com> Signed-off-by: Dave Barach <dave@barachs.net>
2018-11-30Fix L2BD arp termination Test CasePaul Vinciguerra1-3/+7
============================================================================== L2BD arp termination Test Case ============================================================================== 12:02:21,850 Couldn't stat : /tmp/vpp-unittest-TestL2bdArpTerm-_h44qo/stats.sock L2BD arp term - add 5 hosts, verify arp responses OK L2BD arp term - delete 3 hosts, verify arp responses OK L2BD arp term - recreate BD1, readd 3 hosts, verify arp responses OK L2BD arp term - 2 IP4 addrs per host OK L2BD arp term - create and update 10 IP4-mac pairs OK L2BD arp/ND term - hosts with both ip4/ip6 OK L2BD ND term - Add and Del hosts, verify ND replies OK L2BD ND term - Add and update IP+mac, verify ND replies OK L2BD arp term - send garps, verify arp event reports OK L2BD arp term - send duplicate garps, verify suppression OK L2BD arp term - disable ip4 arp events,send garps, verify no events OK L2BD ND term - send NS packets verify reports OK L2BD ND term - send duplicate ns, verify suppression OK L2BD ND term - disable ip4 arp events,send ns, verify no events OK ============================================================================== TEST RESULTS: Scheduled tests: 14 Executed tests: 14 Passed tests: 14 ============================================================================== Test run was successful Change-Id: I6bb1ced11b88080ffaa845d22b0bc471c4f91683 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-11-30make test: print TEST= values for failed testsKlement Sekera1-4/+4
This prints the format strings required to rerun the failed test next to the failures. Change-Id: I973d8ae025f026129826356bce265b1e70086d2f Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-11-30GBP: UT more robust for endpoint timeoutNeale Ranns1-16/+17
Change-Id: Ib78c747fa3e304f7158f8182d060e11e4e778400 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-11-30vcl/test: increase wait time before connectFlorin Coras1-10/+66
Also split tests into smaller groups Change-Id: I35809607b7a59029606bb34b90cfeffd1985fe60 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-11-30vcl: wait for segments with segment handleFlorin Coras1-2/+2
Instead of waiting for notification from binary api. Change-Id: I5ecab857d6bcdbed62d6bb06709570c4cf6b19ea Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-11-30Tests: Fix traceback.Paul Vinciguerra3-129/+182
self.assertTrue(packet.haslayer(msg_type)) File "/usr/lib/python2.7/unittest/case.py", line 422, in assertTrue raise self.failureException(msg) AssertionError: 0 is not true * Scapy packet.haslayer() returns 1 or 0. Replace with assertEqual(packet.haslayer(), 1) to fix tracebacks. * Scapy has multiple layers called TCP/UDP Specify the module name to prevent namespace collisions. * Remove duplicate import. Change-Id: I600f9f330075cd40e1da50f8b2ceb24f645f2c20 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-11-29GRE: UT uses new pkt send functionsNeale Ranns1-108/+23
Change-Id: Icb1767b31421aa1e427498adc82d79307835ee1a Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-11-29make test: verify packet counters in ipsec testsKlement Sekera1-0/+16
Change-Id: Ia15b40f9d91daf3a325cb8d707b22a1dbc68d9cc Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-11-29Trivial: test_container.pyPaul Vinciguerra1-4/+4
First argument of a classmethod should be named 'cls'. Change-Id: Iff4b8d856e57c13a3404dbf6780c1d4add45b36a Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-11-29Trivial: test/test_ipip.pyPaul Vinciguerra1-3/+3
First argument of a method should be named 'self'. Change-Id: I7260916ce9d96108202b650dbf7ac8ce4b3aafdc Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-11-29GBP: l3-out subnetsNeale Ranns2-12/+360
Change-Id: Id4a20066fc5be716c61a497dfcb4d00dc1dbb28d Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-11-29gbp: Add support for flow hash profileMohsin Kazmi1-59/+158
Change-Id: Ibea87f21b3403045cc0d865903b94396fe670e79 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-11-29NAT: syslog - sessions logging (VPP-1139)Matus Fabian1-1/+173
Change-Id: I6e0b7cf37c1a9ac66f8ac011db29504e57844ee9 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-11-29test: use smaller timeouts for vcl/ldp testsFlorin Coras1-18/+18
Change-Id: Idebd110cbf5f0ddc5d9da5a1975b5d278825d131 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-11-29GRE: fix VRF unit-testsNeale Ranns1-3/+8
Change-Id: Ic6d011065bf062a84fdccdb1726ed3e5ed99cfbc Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-11-29VPP-1507: Added binary api to dump configured ip_punt_redirectPavel Kotucek3-23/+89
Change-Id: I790f7785e183cc9aaffd5b593617c4e12a32e20d Signed-off-by: Pavel Kotucek <pavel.kotucek@pantheon.tech>
2018-11-29make test: create virtualenv under /test/Klement Sekera11-73/+79
instead of using build-root, use /test/venv directory for virtualenv similarly, don't pollute build-root with test-built binaries Change-Id: I1e63c04037eaee718b27b34ef16c9eb0252afa53 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-11-29API: Add support for type aliasesOle Troan1-0/+2
Previously all types are compound. This adds support for aliases, so one can do things like: typedef u32 interface_index; or typedef u8 ip4_address[4]; Change-Id: I0455cad0123fc88acb491d2a3ea2725426bdb246 Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-11-28test/remote_test.py: Fix missing importPaul Vinciguerra1-0/+1
Change-Id: I192c33d36f43ae2df0dda509e118f2b920d561ac Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-11-27VPP-1508 python3 tests: use six.iteritemsPaul Vinciguerra2-6/+8
This replaces dictionary.iteritems() on Python 2 and dictionary.items() on Python 3. Change-Id: I58a3ded7d284c59e28d484b0c285aac435bfc229 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-11-27VPP-1508 python3 tests: .encode('hex')Paul Vinciguerra6-37/+44
Change to binascii.hexlify() for consistent bahavior. Change-Id: Ie430cdd1ffeb6510db4aa037546e42d85992093b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-11-27VPP-1508 Fix for bug introduced in tests on use of repr.Paul Vinciguerra5-12/+12
This fixes the change from https://gerrit.fd.io/r/#/c/16175/ ... ====== Totals ====== Ran: 856 tests in 2123.0000 sec. - Passed: 667 - Skipped: 157 - Expected Fail: 0 - Unexpected Success: 0 - Failed: 32 Sum of execute time for each test: 1641.0832 sec. ============== Worker Balance ============== - Worker 0 (416 tests) => 0:35:06.788054 - Worker 1 (440 tests) => 0:31:13.814911 Test id Runtime (s) -------------------------------------------------------------------------------------- ----------- test.test_vcl.VCLCutThruTestCase.test_ldp_cut_thru_bi_dir_nsock 120.382 test.test_vcl.VCLThruHostStackGroupBTestCase.test_ldp_thru_host_stack_bi_dir_nsock 60.368 test.test_vcl.VCLIpv6ThruHostStackGroupBTestCase.test_ldp_thru_host_stack_bi_dir_nsock 60.356 test.test_igmp.TestIgmp.test_igmp_host 47.411 test.test_reassembly.TestFIFReassembly.test_fif6 38.561 test.test_reassembly.TestFIFReassembly.test_fif4 37.045 test.test_gbp.TestGBP.test_gbp 30.041 test.test_dhcp.TestDHCP.test_dhcp_proxy 29.339 test.test_vcl.VCLCutThruTestCase.test_ldp_cut_thru_iperf3 20.489 test.test_neighbor.ARPTestCase.test_arp 19.004 Change-Id: Ic1565f14962f157d5041230de3aeeab0b85f21e1 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-11-26Split non-parallel testsuitejuraj.linkes3-26/+40
Split one big suite into smaller suites when not running tests in parallel. This results in all tests being executed in one iteration. Change-Id: I0d3d357a95d9cc596b606d5911a5819e8ffdeee5 Signed-off-by: juraj.linkes <juraj.linkes@pantheon.tech>
2018-11-26Python3 tests: Fix asserts.Paul Vinciguerra5-13/+13
Use assert(Not)Equal() Use assert{Greater,Less}[Equal] Change-Id: I7c14570b8dce463ee13a67e9c1f10beb1a0308a8 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-11-26Revert "VPP-1508 python3 tests: raw_input"Ole Trøan1-24/+19
This reverts commit 72f0004ac5f6e201cbe042593d76df6f2491d743. Reason for revert: Traceback (most recent call last): File "/home/ksekera/vpp/test/test_ipsec_ah.py", line 36, in setUpClass super(TemplateIpsecAh, cls).setUpClass() File "/home/ksekera/vpp/test/template_ipsec.py", line 105, in setUpClass super(TemplateIpsec, cls).setUpClass() File "/home/ksekera/vpp/test/framework.py", line 459, in setUpClass cls.quit() File "/home/ksekera/vpp/test/framework.py", line 475, in quit six.input("When done debugging, press ENTER to kill the " AttributeError: 'module' object has no attribute 'input' Change-Id: Idf0bbfea231730b37bae5dcb4557a0f82ab1b810 Signed-off-by: Ole Troan <ot@cisco.com>
2018-11-26 test_fib.py: Remove empty methodsPaul Vinciguerra1-10/+0
Remove methods that only call super. py27 runtests: commands[5] | stestr --test-path ./test run --slowest test_fib ============================================================================== FIB Test Case ============================================================================== ============================================================================== IPv6 Test Case ============================================================================== 12:19:23,856 Couldn't stat : /tmp/vpp-unittest-TestFIB-BcLbkQ/stats.sock {1} test.test_fib.TestFIB.test_fib [0.216340s] ... ok ============================================================================== IPv4 Test Case ============================================================================== {0} test.test_ip6.TestIPv6.test_fib [5.328127s] ... ok 12:19:33,921 Couldn't stat : /tmp/vpp-unittest-TestIPv4-AoGvoK/stats.sock {1} test.test_ip4.TestIPv4.test_fib [5.071083s] ... ok ====== Totals ====== Ran: 3 tests in 34.0000 sec. - Passed: 3 - Skipped: 0 - Expected Fail: 0 - Unexpected Success: 0 - Failed: 0 Sum of execute time for each test: 10.6155 sec. ============== Worker Balance ============== - Worker 0 (1 tests) => 0:00:05.328127 - Worker 1 (2 tests) => 0:00:10.251002 Test id Runtime (s) ------------------------------- ----------- test.test_ip6.TestIPv6.test_fib 5.328 test.test_ip4.TestIPv4.test_fib 5.071 test.test_fib.TestFIB.test_fib 0.216 ______________________________________________________ summary ______________________________________________________ py27: commands succeeded congratulations :) vagrant@vpp:/vpp$ Change-Id: Ia07fe13affe2672ea2df774678312c6db8ea63fb Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-11-26VPP-1508 Add support for environment markers.Paul Vinciguerra2-1/+13
Add the ability to specify a specific python library version based on the interpreter/platform/etc. Change-Id: I027acdf22ad839b5cff63b319f0aa100b0f336c8 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-11-26VPP-1508 python3 tests locals()Paul Vinciguerra1-2/+3
Do not use locals() for string formatting. Change-Id: I2e811f479198159b4005fa69c09ad903944d8ae3 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-11-26Fix swapped decorators in VppTestCase.Paul Vinciguerra1-5/+5
Change-Id: I39b5a8e368f0e0b5c83203141d01f22d909b6f9d Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-11-26VPP-1508 python3 tests: raw_inputPaul Vinciguerra1-19/+24
Raw input does not exist in python3 use six.input. Change-Id: Ie461696ff869057bcc3969a7571602dde570f5b8 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-11-25VPP-1508 python3 tests: python3 repr.Paul Vinciguerra5-20/+34
Use six.reprlib. Uses repr for python 2 and reprlib for python 3. Change-Id: Ia343a492d533bd511ed57166381e10a37e452d36 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-11-25make test: Fix too wide subprocess exceptionsPaul Vinciguerra3-5/+5
When a command fails, CalledProcessError is raised. testing with except: masks other failures. Change-Id: I7e3a6739411cb6a4c13e96dd123aff9159213fea Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-11-25Fix typo in test/test_acl_plugin_conns.pyPaul Vinciguerra1-5/+5
first argument of a classmethod should be named 'cls' Change-Id: I1462be1edbfd42cbc6ad3f93d73f23b70d95e70c Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-11-25Fix Typo: test/test_mtu.pyPaul Vinciguerra1-3/+3
first argument of a method should be named 'self'. Change-Id: Iab84a333baba9b9dfb6ffd6da66df4da331a6b11 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-11-24VPP-1505 VPP-1508 Remove dep.: py_lispnetworkingPaul Vinciguerra3-11/+24
test_lisp.py No longer needs the external dependency to run. py27 runtests: commands[6] | stestr --test-path ./test run --slowest test_lisp ============================================================================== Basic LISP test ============================================================================== {0} test.test_lisp.TestLisp.test_lisp_basic_encap [0.487960s] ... ok ====== Totals ====== Ran: 1 tests in 18.0000 sec. - Passed: 1 - Skipped: 0 - Expected Fail: 0 - Unexpected Success: 0 - Failed: 0 Sum of execute time for each test: 0.4880 sec. ============== Worker Balance ============== - Worker 0 (1 tests) => 0:00:00.487960 Test id Runtime (s) --------------------------------------------- ----------- test.test_lisp.TestLisp.test_lisp_basic_encap 0.488 ______________________________________________________ summary ______________________________________________________ py27: commands succeeded congratulations :) vagrant@vpp:/vpp$ Change-Id: I35b35f8ddaed79066b3ed62fa0460c9ea83273c2 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>