summaryrefslogtreecommitdiffstats
path: root/test
AgeCommit message (Collapse)AuthorFilesLines
2017-12-18Support kube-proxy data planeHongjun Ni1-0/+203
This plugin provides kube-proxy data plane on user space, which is used to replace linux kernal's kube-proxy based on iptables. The idea is largely inspired from VPP LB plugin. Currently, kube-proxy plugin supports three service types: 1) Cluster IP plus Port: support any protocols, including TCP, UDP. 2) Node IP plus Node Port: currently only support UDP. 3) External Load Balancer. Please refer to kp_plugin_doc.md for details. Change-Id: I36690e417dd26ad5ec1bd77c7ea4b8100416cac6 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2017-12-16PAPI: Add docstrings to unit tests.Ole Troan1-0/+17
Change-Id: I0e20100c9e2ca4e951f605a79d48c04ff47864cb Signed-off-by: Ole Troan <ot@cisco.com>
2017-12-16GRE tunnel key includes the FIB tableNeale Ranns2-2/+21
- GRE tunnels with the same src,dst addresses are not the same tunnel - Two data-plane improvements: - the cached key was never updated and so useless - no need to dereference the tunnel's HW interface to get the sw_if_index Change-Id: I2f2ea6e08c759a810b753cec22c497e921a2ca01 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-12-16Use crc32 wrapper (VPP-1086)Gabriel Ganne1-1/+1
This allows arm platforms to also take advantage of crc32 hardware acceleration. * add a wrapper for crc32_u64. It's the only one really used. Using it instead of a call to clib_crc32c() eases building symmetrical hash functions. * replace #ifdef on SSE4 by a test on clib_crc32c_uses_intrinsics. Note: keep the test on i386 * fix typo in lb test log Change-Id: I03a0897b70f6c1717e6901d93cf0fe024d5facb5 Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
2017-12-15make test: disable tests which require CXX >= 5.3 on rhelGabriel Ganne1-1/+1
same as commit d3e671e0dbb879d90f00bdee608ee0bb5f6357ae did for centos Change-Id: If57765490d1ef41042a42db433b704af2f0c0ffd Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
2017-12-15ESP_AH_test_automation_scripts rev1“mystarrocks”4-1/+829
Change-Id: I941abdc4a02e4c52c66b9d299e380b27caca7c1d Signed-off-by: “mystarrocks” <mystarrocks@yahoo.com>
2017-12-14BIER disposition default routeNeale Ranns1-0/+25
Change-Id: I7196ad8bf6afaf356674789c05e23ac000bc038e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-12-13IP bi-direction multicast - same cable check on egressNeale Ranns1-3/+43
Change-Id: I655382f7f74181dd7c795a2b22f151f76b50e793 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-12-13make "test-all" target pass againGabriel Ganne3-116/+15
The "test-all" target is still never called as part of any continuous test (as it probably should) but at least it can now be expected to succeed. VXLAN-GPE: * decapsulate Ethernet to "l2-input" instead of "ethernet-input" otherwise the inner mac address get checked against the interface one (external) and packet gets dropped (mac mismatch) * set packet input sw_if_index to unicast vxlan tunnel for learning TEST: * VXLAN: * reduce the number of share tunnels: => reduce test duration by half => no functional change * VXLAN-GPE: * fix test TearDown() cli: command is "show vxlan-gpe" only * remove vxlan-gpe specific tests as the were a duplicated of the BridgeDomain one and already inherited. * disable test_mcast_rcv() and test_mcast_flood() tests * P2PEthernetAPI: * remove test: "create 100k of p2p subifs" there already is a "create 1k p2p subifs" so this one is a load test and not a unit test. See: lists.fd.io/pipermail/vpp-dev/2017-November/007280.html Change-Id: Icafb83769eb560cbdeb3dc6d1f1d3c23c0901cd9 Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
2017-12-13GRE: fix single loop decap and add testNeale Ranns2-0/+34
Change-Id: I64e8a76a17057ae69de72a5a80c0a194cd0c21cb Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-12-13NAT64: multi-thread support (VPP-891)Matus Fabian1-3/+3
Change-Id: Iebf859b6d86482e4465423bad598eecf87e53ec4 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-12-13NAT: DS-Lite AFTR tunnel endpoint address respond to ICMPv6 echo request ↵Matus Fabian1-0/+14
(VPP-1090) Change-Id: I361c043979274eac1aefcd95abdf1624a3ef2756 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-12-12tcp/session: add make testsFlorin Coras3-0/+67
Change-Id: Icb93ab80c5a6432d7b2b698a47e8b612c6f06fbd Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-12-11acl-plugin: unapply/reapply the classifier-based inacls when performing ↵Andrew Yourtchenko1-19/+15
macip_acl_add_replace on an existing MACIP ACL The classifier tables layout might (and most always will) change during the MACIP ACL modification. Furthermore, vnet_set_input_acl_intfc() is quite a picky creature - it quietly does nothing if there is an existing inacl applied, even if the number is different, so a simple "reapply" does not work. So, cleanly remove inacl, then reapply when the new tables are ready. Also, fix the testcase which was supposed to test this exact behavior. Thanks to Jon Loeliger for spotting this issue. Change-Id: I7e4bd8023d9de7e914448bb4466c1b0ef6940f58 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-12-09BIER in non-MPLS netowrksNeale Ranns4-35/+230
as decsribed in section 2.2 ihttps://tools.ietf.org/html/draft-ietf-bier-mpls-encapsulation-10 with BIFT encoding from: https://tools.ietf.org/html/draft-wijnandsxu-bier-non-mpls-bift-encoding-00 changes: 1 - introduce the new BIFT lookup table. BIER tables that have an associated MPLS label are added to the MPLS-FIB. Those that don't are added to the BIER table 2 - BIER routes that have no associated output MPLS label will add a BIFT label. 3 - The BIER FMask has a path-list as a member to resolve via any possible path. Change-Id: I1fd4d9dbd074f0e855c16e9329b81460ebe1efce Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-12-08VOM: prefix bit fiddlingNeale Ranns1-1/+39
Change-Id: I4fbf4a574f455628d56e78cefc1a76adc06bc801 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2017-12-02VOM: l2fib: Add bvi flag supportMohsin Kazmi1-4/+46
Change-Id: I03d7508649e80a538fcf9541815e2c29224bc87a Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2017-11-30NAT44: identity NAT (VPP-1073)Matus Fabian2-0/+107
Identity mapping translate an IP address to itself. Change-Id: Icc0ca5102d32547a4b0c75720b5f5bf41ed69c71 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-11-29VOM: logging, populate and stats fixesNeale Ranns1-3/+1
logging: allow a client to register a callback handler to recieve log messages that way the client can maintain a correctly sequenced log populate: fix the creation of interface and the setting of the handle stats: the reset promise idea is not defined behaviour. Use an eanble/disable command pair Change-Id: I347720bb65df2874c7619e722d593bc863ee2bf1 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2017-11-25VCL: improve debug outputDave Wallace1-2/+10
- Refactor debug output to include vpp handle associated with session id where appropriate. - Fix vcom_connect return value on error. - Refactor vcom_socket_epoll_pwait(). - Fix sock_test_server/client connect failure handling. Change-Id: I2649596aa4b8a77d9bd876409a76810cb2785797 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2017-11-24VOM: Additions to allow uses to UT applications that use VOMNeale Ranns1-2/+2
- find object by key - compare objects Change-Id: I36ec8612be9482bcef7ceced2a59f7403f77b3e8 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2017-11-21VCL: close-on-empty state transition refactoring.Dave Wallace1-1/+1
- Refactor session disconnect/close state transitions. Only remove session state when app calls close(). Add HUP/reset feedback by returning ECONNRESET. - Update debug messages. - Use VCL_LOCK_AND_GET_SESSION macro more extensively Change-Id: I23d372834b901a6726e6d6c1061df73ad967882f Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2017-11-17Replace tap interface using general interfaceHongjun Ni1-2/+2
Change-Id: Icd73f00162fb6aabe296c8bb6f2174ad4f6a17b7 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2017-11-16Add Support of DHCP VSS Type 0 where VPN-ID is ASCIIJohn Lo2-175/+307
Enhence support of DHCP VSS (Virtual Subnet Selection) to include VSS type 0 where VSS info is a NVT (Network Virtual Terminal) ASCII VPN ID where the ASCII string MUST NOT be terminated with a zero byte. Existing code already support VSS type 1, where VSS information is a RFC 2685 VPN-ID of 7 bytes with 3 bytes OUI and 4 bytes VPN index, and VSS type 255 indicating global VPN. Change-Id: I54edbc447c89a2aacd1cc9fc72bd5ba386037608 Signed-off-by: John Lo <loj@cisco.com>
2017-11-15vxlan extended tests - fix scapy-related issuesGabriel Ganne2-1/+12
- Add vxlan-gpe binding on udp port 4790 (taken from scapy upstream) - VXLAN.VNI -> VXLAN.vni Change-Id: If7ad38fa04fbfec01e01c81a06e88ffe70183672 Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
2017-11-15VOM: interface RD update reconfigures L3 bindingsNeale Ranns1-0/+87
Change-Id: I273e1ea28c3c146e4a88d031c790c1cc56dccf00 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2017-11-14VOM: bridge-domain learning mode and route help commandsNeale Ranns1-3/+3
Change-Id: I2fa219d6530f1e7a3b8ae32d35a0c60ba57c5129 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2017-11-11ACLs: Use better error return codes than "-1" everywhere.Jon Loeliger1-5/+5
Added two new errors: ACL_IN_USE_INBOUND ACL_IN_USE_OUTBOUND Update ACL tests to expect new, precise return values. Change-Id: I644861a18aa5b70cce5f451dd6655641160c7697 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2017-11-11MPLS disposition actions at the tail of unicast LSPsNeale Ranns4-8/+115
Change-Id: I8c42e26152f2ed1246f91b789887bfc923418bdf Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-10make test: fix logic for CACHE_OUTPUT optionKlement Sekera1-1/+1
Change-Id: I9938c0154c860913e27cecb18ec68f247943a2e6 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-11-10add classify session action set-sr-policy-indexGabriel Ganne2-0/+155
This allows to use the classifier to steer source routing packets instead of using the "sr steer" command. This way we can steer on anything instead of only the dst ip address. test: * add add_node_next function to the VppPapiProvider class. * add simple test scenario using the classifier to steer packets with dest ip addr == a7::/8 to the source routing insert node. * use new interface indexes (3,4) instead of (0,1) to prevent a cleanup conflict with the other tests which attach a specific fib to the interface. The test creates interfaces sepsrated from the other tests to prevent a conflict in the cleaning of the ip6 fib index 1 which causes vpp not to be able to find a default route on this table. Change-Id: Ibacb30fab3ce53f0dfe848ca6a8cdf0d111d8336 Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
2017-11-10make test: automatically seed random generatorKlement Sekera3-14/+34
Change-Id: I286b61d41cc2b557de3eb8801ff95c643f680acd Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-11-09VCL: Set debug output level from env varDave Wallace1-2/+7
Change-Id: Ia99047715ed652eca1aea1e4144e407f9608d59e Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2017-11-09BIERNeale Ranns7-42/+899
- see draft-ietf-bier-mpls-encapsulation-10 - midpoint, head and tail functions - supported payload protocols; IPv4 and IPv6 only. Change-Id: I59d7363bb6fdfdce8e4016a68a9c8f5a5e5791cb Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-09Port restricted NAT44 (VPP-1048)Matus Fabian1-0/+32
For the MAP-E CE limit port choice based on PSID CLI: nat44 addr-port-assignment-alg map-e psid <n> psid-offset <n> psid-len <n> Change-Id: Iecceee61fca372cb5790c16993a82fbdc9930f0f Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-11-09Remove boost-log link dependency from test/ext/MakefileNeale Ranns1-1/+0
Change-Id: I388526c31c75e6af694b96141497c0c67d8fe310 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2017-11-08ACL plugin support tagged subinterfacesPavel Kotucek2-230/+509
Change-Id: I92b351895c7efb26533c05512b91ead8ddbfb9c8 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-11-08NAT64 to use IPv4 address from interface (VPP-1051)Matus Fabian2-1/+32
Change-Id: I326429c31dea6958a342ee152ef86cb975f4b12c Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-11-07SNAT: IP fragmentation (VPP-890)Matus Fabian2-2/+449
Translation of fragmented packets. Change-Id: I9b1f2e9433ce273638080f32c2d3bff39c49899d Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-11-07UDP Encapsulation.Neale Ranns4-0/+355
A UDP-encap object that particiapates in the FIB graph and contributes DPO to teh output chain. It thereofre resembles a tunnel but without the interface. FIB paths (and henace routes) can then be created to egress through the UDP-encap. Said routes can have MPLS labels, hence this also allows MPLSoUPD. Encap is uni-directional. For decap, one still registers with the UDP port dispatcher. Change-Id: I23bd345523b20789a1de1b02022ea1148ca50797 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-07NAT: DS-Lite (VPP-1040)Matus Fabian2-0/+176
Dual-Stack Lite enables a broadband service provider to share IPv4 addresses among customers by combining two well-known technologies: IPv4-in-IPv6 and NAT. Change-Id: I039740f8548c623cd1ac89b8ecda1a6cc4aafb9c Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-11-07VCL-LDPRELOAD: enable accept4() wrapperDave Wallace1-1/+1
Change-Id: I56567953fb8329315393047913e30fc7f2242bdb Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2017-11-06make test: add CACHE_OUTPUT optionKlement Sekera2-0/+13
This option allows one to toggle whether captured VPP stdout/stderr output is printed inline (each line logged immediately after being collected). Default setting is 0/no (behaviour same as before). This allows one to see the output in case of vpp crashing during test run even if test framework gets stuck waiting for shared memory mutex (which crashed vpp can no longer unlock). Complete stdout/stderr output is always printed as a block to the logger after test finishes. Change-Id: If3645a9b85562dba26ed9c87daa27ea5ef34f2e5 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-11-06make test: fix DEBUG=core errorKlement Sekera2-1/+3
Change-Id: I703b2866a1607d6a2fad215e90b5cf2d7afdfd0d Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-11-06VOM reshuffleNeale Ranns2-283/+310
split the VOM into two halves; a top/front-end and a bottom/backend. Only the backend includes the auto-generated VAPI. This serves two purposes: 1 - improves ompile times for VOM, since the VAPI is included only in the backend. 2 - does not expose VAPI to users of VOM Change-Id: I17b93aeaef10c0eba8612016d9034aca5628d9f7 Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2017-11-06VCL_LDPRELOAD: mixed libc/vcl epoll fd'sDave Wallace1-8/+2
Change-Id: Ibc82781ddef5ea0517220b9054db3d53ec348c6c Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2017-11-02VCL: application proxy configurationDave Wallace1-7/+11
- Add support to configure VCL to set application proxy transport types and app_is_proxy flag via vcl config file or env vars. - Clean up debug output. - Rename session_scope -> app_scope. Change-Id: I6e35f3cdd84daf0112133af8f33acd0152f87ca3 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2017-11-01VPP Object Model (VOM)Neale Ranns5-52/+1565
The VOM is a C++ library for use by clients/agents of VPP for programming state. It uses the binary APIs to do so. Various other common client side functions are also provided. Please see om.hpp for a more detailed description. Change-Id: Ib756bfe99817093815a9e26ccf464aa5583fc523 Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Co-authored-by: Mohsin Kazmi <sykazmi@cisco.com>
2017-10-31VPP PAPI: Error in unserializer for non-array compound types.Ole Troan1-0/+438
A bug in the decoder of messages when there was a non-array compound type. The typical result was an error message from the struct library: "error:unpack_from requires a buffer of at least 4 bytes" Change-Id: Ie30fec6fc39b9f4177b54fa4adc4fc69674f0e12 Signed-off-by: Ole Troan <ot@cisco.com>
2017-10-31l2fib: MAC: Fix uint64 to u8 byte arrayMohsin Kazmi1-1/+1
As per proposal on the mailing list, this patch fixes the represntation of MAC address in VPP API calls for · L2fib_add_del · L2_fib_table_details Change-Id: I31e17efd1a6314cded69666e693cb8fc33158d02 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>