Age | Commit message (Collapse) | Author | Files | Lines |
|
the IPv6 RA tests take timing into the account,
but the time inside VPP may go slightly differently compared
to the time inside the driving python thread,
if the machine running the tests is heavily loaded.
Make a sleep function which sleeps "on VPP time" and use it.
Change-Id: I3b34b0164f6e0ec7a619b92ee308089a4a8935e3
Type: test
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
The test for ND event suppression reused the previous test run
ipv6 address, and would sometimes consider that a duplicate,
and therefore suppressing that one too.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I1b115aa4eba9d57770fa03fcf38b7a1c251cfe88
|
|
CDP uses the running sytems host name, which
caused different failures on different systems.
The root cause was an python3 specific error in
checksum calculation.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I205436682d46e7e8cbb8c057c03a76dbbcab4d72
|
|
Type: feature
Signed-off-by: haiyanx1.zhang <haiyanx1.zhang@intel.com>
Change-Id: I071f5face0d489dc967cce1edcffbc1f8fac5c7e
Signed-off-by: haiyanx1.zhang <haiyanx1.zhang@intel.com>
|
|
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I0264451632c1ce780b38a2c15a7e34350fc6d521
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I0ff4d58c181b2bdf483b8b039ad005c2a4915aa8
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I6cedb43af4437fdabce75f4a845629c5c2f96f6a
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I9c66bce900f78e5fbd435515df94e327ad25c3c6
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Id17bcb65d7eb27f865fc7872b3e485c09f1d29a7
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Id13da9371c71c10c12a0120ec89ba21c1ca47524
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I8af6ee6e5239f0836978baa063a18a01c610279f
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I3cf5295f1a85579a66ba38ca1f74678b45474959
|
|
Some testclasses (e.g. IPSec) have methods with the same names,
this causes a race when running in parallel to save the API and
move it into the test's directory - the name of the file has
only the test method name as a discriminator.
Saving two traces from two VPP instances "succeeds", in that
it silently overwrites the file. But only one mv operation
works - the other gives an error "file not found" and fails the test.
Solution: add the PID of VPP under test to the API dump filename,
this way the filenames become guaranteed unique and the race is avoided.
Change-Id: I1bb47ed73369fea0f1bfbf907588a51e2cabfb7f
Type: test
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I990d8d521c128e8d4f482e30b3a49cbc11b632d1
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Ib918d11fb3278a25a92006dcfe3c7c484e7b33ea
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I166019cc69fd01cb43f1a3fad699f3d2e5ec5b19
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Ie23c9d2d7325be62ef33df2f0562ab41518f7bf4
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Iea19d7bc2dfe9736ddefb4419509ccfda7a67eeb
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I3255702e7c562c8d04a91a095e245756c6443a9e
|
|
Type: fix
Change-Id: Ia9f74f951f831cc5c9b5af863db1bb3f7a1a81ff
Signed-off-by: snaramre <snaramre@cisco.com>
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I7c4a12165fa0928fb2b8d99fc1c8d5de16377e7e
|
|
Type: fix
Change-Id: I0d9b823bd558c48b18af9b0d1e80c30729e64dac
Signed-off-by: snaramre <snaramre@cisco.com>
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Ie15ea8f01846f87cb65e90e8762dc941441fc176
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Id1794f38fcb776ded9b769141f5f47d7be75f247
|
|
Type: fix
Change-Id: Ie7764fec13cbb83b6899c7c33b7b2f8cc5d40c8a
Signed-off-by: snaramre <snaramre@cisco.com>
|
|
Python3 fixes.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I648b2142d45dfab9146a02eeb1b12de11103ff9f
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: fix
Change-Id: Ie210500fba741d3f047e8499957b5b233a78fa36
Signed-off-by: snaramre <snaramre@cisco.com>
|
|
Type: refactor
Change-Id: Ib4a8e7e64093b2db1deda6663325080bc8337605
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
A sizable number of tests call pg_start() to get the packets flowing and then
immediately expect to have the entirety of the packets gone through.
This works on powerful and unstressed hardware, but fails in beautifully random
ways under load.
This also necessitates the complicated logic of remembering the "zombie captures",
then sleeping for some time before cleaning them up....
The solution is simple: in pg_start(), start the generators, wait till they
all finish, clean up, done.
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Change-Id: I930e51b7aae39c9841d22dd905a4d13a465a672b
Type: test
|
|
Intermittently, a test would start VPP, but no testcases would execute.
This would be more probable apparent during the high load or if there
is another testcase dumping the core at that moment.
Adding the logging to the connection revealed it was the stats socket
connection erroring with error -2. Increasing the deadline
from 3 seconds to 5 minutes has eliminated this error.
Change-Id: I40bd7e642abb9e2aef0238c612e4c34781de5db2
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Type: test
|
|
Rather than only using time-based method of periodically checking
whether the pcap file appeared, first check that the packet generator
has stopped. To make this change fail-safe, have a 5-minute timeout
on this activity, just in case the things go terribly wrong.
Type: test
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Change-Id: Id16b2802b2de8a4cafb5d9f0a8c9ba62ec89dc32
|
|
Type: test
Change-Id: Ia09c3149490e47e49e59544ab1680a8160e60ac8
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
To improve gcov/lcov code coverage stats, it's necessary to send
incorrect debug CLI commands; to force vpp into debug CLI error paths.
cli_return_response() sends commands and returns the response object,
so test vectors can handle failures.
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I4fab591c9d2e30c996f016e18e4fd69b9c5bed06
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I1964e4f0afe6f030ae9c8e28fcba5fd81aa1f130
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: If6c102a53d074cba7eca6b6af9855aa4486f38cc
|
|
This change is designed to help the uninformed find the right way
to run extended tests by using the test-all[-debug] targets.
'make test EXTENDED_TESTS=y' fails to build as it has a dependency
on 'vom-install' which is conveniently included in test-all[-debug].
- clarify test-all[-debug] description and
make test-help description
- Also align indentation of make help output
Type: style
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: Ief54cc8a5af68c052aacb0d660237c5eb63451b5
|
|
Type: fix
Signed-off-by: Rajesh Goel <rajegoel@cisco.com>
Change-Id: Ie4372c5cf58ab215cdec5ce56f8a994daaba2844
|
|
Type: fix
Change-Id: Ic4fb53e6d10a1de155a3088be81d53d9efeb0c0f
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: feature
Change-Id: I3fe27a8ef577741d9a5c4f090ec91cf68fb44fe3
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: I35fb6fdfba50c4a59cf1ffb94cb51487bcf5afc9
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: Ia63d920788add2584060a240321acced7a471640
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: Ie2d2c74ed3832d137e808e0b52348b4e660feb6f
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Type: feature
Change-Id: Ib2352ca4c7abf4645f21fa16aaaf27408890a2bf
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
Change-Id: Ibc8334e26c7e6f6120696c3e313b6e11d73dab99
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: fix
Change-Id: I5a5461652f8115fa1270e20f748178fb5f5450f2
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
this is a preparation step for introducing other reassembly types
Type: refactor
Change-Id: I197e299dbd729b00eead31667913b8ceff915d63
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: fix
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I93eb0ae4338247fa2479f8e419483d1593436dc7
|
|
One type for address with prefix and one type for prefix.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Icfec51d9b7d5cde1d69fbecdd97498688ab7b295
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: test
Change-Id: Ieeae7f1653f5f2e8e49f258871b389ef8954c90b
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Reverting as make test must me able to run non-root so creating tap interfaces is no-go.
Type: fix
Fixes: 3b2db9002c14f9e0742622f2d503c5801d443827
Change-Id: Ib6eb2679b65b662ed6e88e67f8b199744abae85e
Signed-off-by: Damjan Marion <dmarion@me.com>
|