Age | Commit message (Collapse) | Author | Files | Lines |
|
(VPP-1090)
Change-Id: I361c043979274eac1aefcd95abdf1624a3ef2756
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: Icb93ab80c5a6432d7b2b698a47e8b612c6f06fbd
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
macip_acl_add_replace on an existing MACIP ACL
The classifier tables layout might (and most always will) change during the MACIP ACL modification.
Furthermore, vnet_set_input_acl_intfc() is quite a picky creature - it quietly does nothing
if there is an existing inacl applied, even if the number is different, so a simple "reapply"
does not work. So, cleanly remove inacl, then reapply when the new tables are ready.
Also, fix the testcase which was supposed to test this exact behavior.
Thanks to Jon Loeliger for spotting this issue.
Change-Id: I7e4bd8023d9de7e914448bb4466c1b0ef6940f58
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
as decsribed in section 2.2
ihttps://tools.ietf.org/html/draft-ietf-bier-mpls-encapsulation-10
with BIFT encoding from:
https://tools.ietf.org/html/draft-wijnandsxu-bier-non-mpls-bift-encoding-00
changes:
1 - introduce the new BIFT lookup table. BIER tables that have an associated
MPLS label are added to the MPLS-FIB. Those that don't are added to the
BIER table
2 - BIER routes that have no associated output MPLS label will add a BIFT label.
3 - The BIER FMask has a path-list as a member to resolve via any possible path.
Change-Id: I1fd4d9dbd074f0e855c16e9329b81460ebe1efce
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I4fbf4a574f455628d56e78cefc1a76adc06bc801
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I03d7508649e80a538fcf9541815e2c29224bc87a
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Identity mapping translate an IP address to itself.
Change-Id: Icc0ca5102d32547a4b0c75720b5f5bf41ed69c71
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
logging: allow a client to register a callback handler to recieve log messages
that way the client can maintain a correctly sequenced log
populate: fix the creation of interface and the setting of the handle
stats: the reset promise idea is not defined behaviour.
Use an eanble/disable command pair
Change-Id: I347720bb65df2874c7619e722d593bc863ee2bf1
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
- Refactor debug output to include vpp handle associated
with session id where appropriate.
- Fix vcom_connect return value on error.
- Refactor vcom_socket_epoll_pwait().
- Fix sock_test_server/client connect failure handling.
Change-Id: I2649596aa4b8a77d9bd876409a76810cb2785797
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
- find object by key
- compare objects
Change-Id: I36ec8612be9482bcef7ceced2a59f7403f77b3e8
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
- Refactor session disconnect/close state
transitions. Only remove session state
when app calls close(). Add HUP/reset
feedback by returning ECONNRESET.
- Update debug messages.
- Use VCL_LOCK_AND_GET_SESSION macro more
extensively
Change-Id: I23d372834b901a6726e6d6c1061df73ad967882f
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Change-Id: Icd73f00162fb6aabe296c8bb6f2174ad4f6a17b7
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Enhence support of DHCP VSS (Virtual Subnet Selection) to include
VSS type 0 where VSS info is a NVT (Network Virtual Terminal)
ASCII VPN ID where the ASCII string MUST NOT be terminated with a
zero byte. Existing code already support VSS type 1, where VSS
information is a RFC 2685 VPN-ID of 7 bytes with 3 bytes OUI
and 4 bytes VPN index, and VSS type 255 indicating global VPN.
Change-Id: I54edbc447c89a2aacd1cc9fc72bd5ba386037608
Signed-off-by: John Lo <loj@cisco.com>
|
|
- Add vxlan-gpe binding on udp port 4790 (taken from scapy upstream)
- VXLAN.VNI -> VXLAN.vni
Change-Id: If7ad38fa04fbfec01e01c81a06e88ffe70183672
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
Change-Id: I273e1ea28c3c146e4a88d031c790c1cc56dccf00
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I2fa219d6530f1e7a3b8ae32d35a0c60ba57c5129
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Added two new errors:
ACL_IN_USE_INBOUND
ACL_IN_USE_OUTBOUND
Update ACL tests to expect new, precise return values.
Change-Id: I644861a18aa5b70cce5f451dd6655641160c7697
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Change-Id: I8c42e26152f2ed1246f91b789887bfc923418bdf
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I9938c0154c860913e27cecb18ec68f247943a2e6
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
This allows to use the classifier to steer source routing packets instead
of using the "sr steer" command.
This way we can steer on anything instead of only the dst ip address.
test:
* add add_node_next function to the VppPapiProvider class.
* add simple test scenario using the classifier to steer packets with
dest ip addr == a7::/8 to the source routing insert node.
* use new interface indexes (3,4) instead of (0,1) to prevent a cleanup
conflict with the other tests which attach a specific fib to the
interface.
The test creates interfaces sepsrated from the other tests to prevent a
conflict in the cleaning of the ip6 fib index 1 which causes vpp not to
be able to find a default route on this table.
Change-Id: Ibacb30fab3ce53f0dfe848ca6a8cdf0d111d8336
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
Change-Id: I286b61d41cc2b557de3eb8801ff95c643f680acd
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: Ia99047715ed652eca1aea1e4144e407f9608d59e
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
- see draft-ietf-bier-mpls-encapsulation-10
- midpoint, head and tail functions
- supported payload protocols; IPv4 and IPv6 only.
Change-Id: I59d7363bb6fdfdce8e4016a68a9c8f5a5e5791cb
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
For the MAP-E CE limit port choice based on PSID
CLI: nat44 addr-port-assignment-alg map-e psid <n> psid-offset <n> psid-len <n>
Change-Id: Iecceee61fca372cb5790c16993a82fbdc9930f0f
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I388526c31c75e6af694b96141497c0c67d8fe310
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I92b351895c7efb26533c05512b91ead8ddbfb9c8
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
Change-Id: I326429c31dea6958a342ee152ef86cb975f4b12c
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Translation of fragmented packets.
Change-Id: I9b1f2e9433ce273638080f32c2d3bff39c49899d
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
A UDP-encap object that particiapates in the FIB graph and contributes
DPO to teh output chain. It thereofre resembles a tunnel but without the
interface. FIB paths (and henace routes) can then be created to egress
through the UDP-encap. Said routes can have MPLS labels, hence this also
allows MPLSoUPD.
Encap is uni-directional. For decap, one still registers with the UDP port
dispatcher.
Change-Id: I23bd345523b20789a1de1b02022ea1148ca50797
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Dual-Stack Lite enables a broadband service provider to share IPv4 addresses among customers by combining two well-known technologies: IPv4-in-IPv6 and NAT.
Change-Id: I039740f8548c623cd1ac89b8ecda1a6cc4aafb9c
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I56567953fb8329315393047913e30fc7f2242bdb
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
This option allows one to toggle whether captured VPP stdout/stderr
output is printed inline (each line logged immediately after being
collected). Default setting is 0/no (behaviour same as before).
This allows one to see the output in case of vpp crashing during test
run even if test framework gets stuck waiting for shared memory mutex
(which crashed vpp can no longer unlock).
Complete stdout/stderr output is always printed as a block to the
logger after test finishes.
Change-Id: If3645a9b85562dba26ed9c87daa27ea5ef34f2e5
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I703b2866a1607d6a2fad215e90b5cf2d7afdfd0d
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
split the VOM into two halves; a top/front-end and a bottom/backend.
Only the backend includes the auto-generated VAPI.
This serves two purposes:
1 - improves ompile times for VOM, since the VAPI is included
only in the backend.
2 - does not expose VAPI to users of VOM
Change-Id: I17b93aeaef10c0eba8612016d9034aca5628d9f7
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: Ibc82781ddef5ea0517220b9054db3d53ec348c6c
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
- Add support to configure VCL to set
application proxy transport types
and app_is_proxy flag via vcl
config file or env vars.
- Clean up debug output.
- Rename session_scope -> app_scope.
Change-Id: I6e35f3cdd84daf0112133af8f33acd0152f87ca3
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
The VOM is a C++ library for use by clients/agents of VPP for programming
state. It uses the binary APIs to do so. Various other common client side
functions are also provided. Please see om.hpp for a more detailed description.
Change-Id: Ib756bfe99817093815a9e26ccf464aa5583fc523
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Co-authored-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
A bug in the decoder of messages when there was a non-array compound type.
The typical result was an error message from the struct library:
"error:unpack_from requires a buffer of at least 4 bytes"
Change-Id: Ie30fec6fc39b9f4177b54fa4adc4fc69674f0e12
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
As per proposal on the mailing list, this patch fixes
the represntation of MAC address in VPP API calls for
· L2fib_add_del
· L2_fib_table_details
Change-Id: I31e17efd1a6314cded69666e693cb8fc33158d02
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I7aafdecd6f370411138e6ab67b2ff72cda6e0666
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Add new cli api: "test lb flowtable flush" which flushes everything.
Call this new cli function after the end of each lb unit test.
Change-Id: I71d04a7bfba398f7d4dd9cc3ed24bba786943663
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
Administratively delete NAT44 session for specific inside/outside addresses and port pair.
Change-Id: If5ab500ac3592c7153d6d8f2cc0297df7309fbc3
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I04f1b63e66260d99c0dd180b0295a55a9b750df7
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Change-Id: I34ab79ddf0a612be1f2a4223e46811516e5b317e
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Dynamically calculate the required buffer size to pack into based on
message definition. Also add input parameter length checking.
Change-Id: I7633bec596e4833bb328fbf63a65b866c7985de5
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I4164c4c19c8dbfd73e6ddf94a12056325cc093b9
Signed-off-by: Neale Ranns <nranns@cisco.com>
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Use a single physical interface in order to accomplish NAT44/NAT64.
Change-Id: I0c8138953a7a4075df306172e125abad771315e4
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
- Move VCL & VCL-LDPRELOAD source into src/vcl
- Statically link vppcom into libvcl-ldpreload.so
Change-Id: I778300b37e8b06640d9dbc01caf297edf7a6edb7
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
missing "del" keyword, and as a result, we were trying to add the as
twice.
Change-Id: If78ce03f0c71591c05ff6f4748fd9c929d0f861f
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
Change-Id: I63d336a1ba366a60a2a8f1124e3f37f742cccb65
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|