summaryrefslogtreecommitdiffstats
path: root/test
AgeCommit message (Collapse)AuthorFilesLines
2019-06-27sctp: add option to enable/disableFlorin Coras1-0/+1
Type: feature By default sctp is disabled to avoid wasting cycles. Change-Id: I1e2f764c7168b5c15062efbe5895de93dcc2614e Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-06-27tests: pin python dependenciesAloys Augustin4-17/+348
This commit ensures that the tests always run with the exact same version for all the Python dependencies. It uses pip-tools to achieve that. Our top-level dependencies are specified in the requirements.txt file. From this file, pip-tools generates the requirements-{2,3}.txt file, which pins all the versions of all the recursive dependencies, and is used to install the packages in the test virtualenv. To change or add a top-level dependency, update requirements.txt and run make test as usual with python2 and python3. The requirements-{2,3}.txt file will be updated and you can verify that nothing breaks. Then add all requirements* files in your commit. To refresh the python packages (i.e. get new versions of the recursive dependencies, or of the dependencies that are not pinned in requirements.txt), just run: PYTHON=python2.7 make test-refresh-deps PYTHON=python3.6 make test-refresh-deps and this will update the requirements-{2,3}.txt files. Ideally we should run this after each release. Type: make Change-Id: Ic533de3d06ec4019ff38f5231208da6f1025bfc7 Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
2019-06-27quic: fix testsAloys Augustin1-6/+6
Reduce the amount of data sent to avoid a hang in the QUIC stack when the fifos get full. This fixes the QUIC tests in debug mode while https://gerrit.fd.io/r/c/19823/ is not merged. Change-Id: I1ed4c5dc3d41c09bc674de808f3778a074b15454 Type: test Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
2019-06-27tests: rename stream name in testsPaul Vinciguerra1-1/+2
PacketGenerator streams were named based on their sw_if_index but without knowing that, it looked like it was paired with the interface instance value. Reencode the name to encode the data in a clearer way. 20:48:12,859 CLI: packet-generator new pcap /tmp/vpp-unittest-TestClassifierPBR-6DVQW2/pg0_in.pcap source pg0 name pcap0-sw_if_index-1 Change-Id: I5b82193943fee0cf060900d73aaaaecca1247105 Type: style Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-27vom: get the tests working againNeale Ranns1-0/+5
Type: fix Fixes: 097fa66b Change-Id: Ib73714665e3325c7e1e8f939275933a4d219f96b Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-26tests: fix test-checkstyle failure in test_memif.pyPaul Vinciguerra1-2/+2
Type: style Change-Id: Ifea1fed5a6943605a6111afb33c54a8ff852d087 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-26gbp: enforce same endpoint mac and ip srcBenoît Ganne1-3/+13
During packet classification, make sure packets coming from an EP also matches this specific EP IP address and vice-versa. This prevents and EP to send a packet on behalf of another EP. Type: fix Change-Id: I30287644ec73b90d9b6913952a82b2baedf6a5ff Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-06-26api: refactor format_vl_api_prefix_t return keysPaul Vinciguerra3-28/+32
format_vl_api_prefix_t returns a dict with keys 'address' and 'address_length', but other format_vl_api_prefix functions return a dict with 'prefix', and 'len'. Refactor all format_vl_api_prefix_t to return consistent keys 'address' and 'len'. Type: refactor Change-Id: I5f9558fc2da8742a303266e011102f5b2db80aad Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-26tests: set object_id for routes.Paul Vinciguerra1-5/+8
Object id's are used as keys in the object repository. They need to be unique. Also useful for debugging in log.txt. Type: test Change-Id: I69b5f3a7508918a5780ff8f20d27d4a3c34a5699 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-26vom: fix test build failureNeale Ranns1-17/+20
Type: fix Fixes: 097fa66b Change-Id: Id5ae4029f27af6cba76d6527c0d3d7212ab84f3e Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-26tests: fix memif testsJakub Grajciar2-12/+12
remote_test.py - Remove 'ret' arg from _remote_exec(), so that the function always reads the reply from the pipe. (fix unmatched request/reply) memif_test.py - Don't register VppIpRoute to VppObjectRegistry. Type: fix Change-Id: I8a51e7ffd68df5f379534f5ddd5ec9367a89be32 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-06-25tests: one more ipfix flush cli to api replacementVratko Polak1-1/+1
Type: fix Fixes: 21b83e96d6076cda01ee80343840bc1166557150 Change-Id: I8216127ddbbf3301d2602bab54dbc433233387a2 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2019-06-25tests: fix test_gbp.py.Paul Vinciguerra4-85/+107
A number of VppGbpContractRules were missing the hash_mode_t and were being replaced by an optional kwarg. Type: fix Change-Id: I6ca03c93b69e4355c237a6c9402e1e178b701b21 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-25quic: test_quic.py style is fixed.Chore1-15/+49
Type: test Change-Id: I943f95ef740a0646b2da363c6a16dff1f4a2bb83 Signed-off-by: Chore <s3m2e1.6star@gmail.com>
2019-06-25tests: if vpp is dead, specify the test name in the outputPaul Vinciguerra1-3/+15
'Exception: VPP is dead when setting up the test' is more helpful with the test info. Type: test Change-Id: I6a262fdcf2ecb33aae17bef3d19745053a0bade8 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-24quic: server create streams test caseDave Wallace1-201/+116
Type: test * Refactor quic_echo test app * Add timinig capabilities * Add multiple quic tests Change-Id: I3302c66539b12c1375d1a0c6d46f9ff4c6f2b27c Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2019-06-24api: implement ipfix_flushPaul Vinciguerra2-37/+37
-Migrate tests to api and cleanup: '# FIXME this should be an API call' in tests. Type: feature Change-Id: I715f9f8acc0f2af9c974ea221b2aea46692a6218 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-24tests: refactor VppDiedError.Paul Vinciguerra3-29/+32
- Move Exception into same module as TestCase. - Move the error reporting logic inside the error. - Allows testing of the returncode and signal_name for tests to consume. - Fix the signal reporting code: VppDiedError: VPP subprocess died unexpectedly with returncode -6 [unknown]. displays as: VppDiedError: VPP subprocess died unexpectedly with return code: -6 [SIGABRT]. Type: test Change-Id: I8488ab318a596c9b737308829cedfb7e96e57302 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-20tests: move output from CI results and put in logPaul Vinciguerra1-1/+1
NAT session details are output to the test results. Twice NAT44 OK Acquire twice NAT44 addresses from interface OK 21:10:42,661 NAT44 sessions: -------- thread 0 vpp_main: 1 sessions -------- 172.16.1.2: 0 dynamic translations, 1 static translations i2o 172.16.1.2 proto tcp port 8080 fib 0 o2i 10.0.0.3 proto tcp port 80 fib 0 external host o2i 172.16.2.2:4567 i2o 10.0.1.3:42296 index 1869 last heard 97.99 total pkts 2, total bytes 80 static translation load-balancing twice-nat Twice NAT44 local service load balancing OK NAT44 translate packet with unknown protocol OK Type: test Change-Id: I932a4a1133d597bb82da6e04f2ea833094a481da Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-20tests: add sudo to gdb commandsPaul Vinciguerra1-2/+3
Prepend sudo to the gdb command line. Type: test Change-Id: I09013c3ca512e26de0c46c02f643b21064ba499c Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-20buffers: fix crashKlement Sekera1-0/+29
this change is being made to fix a crash when current_data < 0 in buffer linearization function Ticket: N/A Type: fix Fixes: f883f6a1132ad4bb7aa9d9a79d420274fbcf3b64 Change-Id: Ia4ede823f673780e0c30d075b091db42e183650d Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-06-19l2: BD ARP termination entry API updateNeale Ranns3-27/+31
Type: refactor Change-Id: I492b6e88acadf0ab0e4d7b1c0c5d1cab84c1726f Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-19tests: send packet output to log - test_punt.pyPaul Vinciguerra1-1/+0
Move output to log.txt. 11:51:58,111 Verifying against 3 packets in verify_udp_pkts. 11:51:58,111 ###[ Ethernet ]### dst = 02:fe:4c:62:06:e5 src = 02:01:00:00:ff:02 type = 0x800 \###[ IP ]### version = 4 ihl = 5 tos = 0x0 len = 128 ... Type: test Change-Id: Iebaf34c2ac16e7fa8dffbdeadf18ab6c5f4c7494 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-18tests: fix checkstyle failure in test_stats_client.pySteven Luong1-1/+4
New job submitted to Jenkins reported checkstyle failure in test_stats_client.py. It needs a blank line in one place and line is too long in another place. Type: fix Change-Id: I9b18df1df449a287570d614d6c5b514ceb88480c Signed-off-by: Steven Luong <sluong@cisco.com>
2019-06-18ipsec: fix ipv6 tunnel protect testsFlorin Coras1-2/+1
Type: fix Change-Id: I1f8007ae659097152046aa1396cc23f126e29018 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-06-18ipsec: ipsec-tun protectNeale Ranns7-129/+792
please consult the new tunnel proposal at: https://wiki.fd.io/view/VPP/IPSec Type: feature Change-Id: I52857fc92ae068b85f59be08bdbea1bd5932e291 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-18fib: fib api updatesNeale Ranns52-1422/+1224
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-18stats: fix memory leakage when adding / deleting interfacesOle Troan1-1/+18
This fixes two leaks in registering errors in the stats segment. - The error name created by vlib_register_errors() was not freed. - Duplicate error names (when interface readded) was added to the vector. This fix also adds memory usage statistics for the statistics segment as /mem/statseg/{used, total} Change-Id: Ife98d5fc5baef5bdae426a5a1eef428af2b9ab8a Type: fix Signed-off-by: Ole Troan <ot@cisco.com>
2019-06-18ip: reassembly-separate feature and custom codeKlement Sekera1-0/+18
This change is made fix a crash, because is_feature flag semantics turn out to be different from "custom app code" semantics. Introduce a flag which custom plugins/apps can use to instead of tying that code to is_feature flag. Change-Id: Ief5898711e68529f9306cfac54c4dc9b3650f9e3 Ticket: N/A Type: fix Fixes: 21aa8f1022590b8b5caf819b4bbd485de0f1dfe5 Signed-off-by: Klement Sekera <ksekera@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com>
2019-06-14ipsec: Correctly rewind the buffer to the IP header when punting UDP ↵Neale Ranns3-15/+47
encapped SPI-0 packets Type: fix Fixes: b71fa75d48 Change-Id: I2d81b373f7659e702759939c096b315afa36f621 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-12tests: filter sw_interface_dump in tests.Paul Vinciguerra2-3/+3
Type: test Change-Id: I92921444ef6b0e574701398cf57971c9ecc1cc91 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-07bfd: UT for BFD session over GRE tunnelNeale Ranns2-14/+113
Signed-off-by: Neale Ranns <nranns@cisco.com> Adding UT for BFD over GRE tunnel. Ticket: none Type: test Change-Id: I03eca4a0c7114cdc16fde9be4cd6db6216b8c845 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-07VOM-test: fix the UT post BVI and Bridge-domain changesNeale Ranns1-7/+27
Change-Id: Ibd9059e616f46f7017e397262bf4c0606d81eb0c Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-07tests: framework gracefully handle 'VppTransportShmemIOError'Paul Vinciguerra2-16/+18
Catches: ---- Traceback (most recent call last): File "/vpp/test/framework.py", line 593, in tearDown self.logger.info(self.vapi.ppcli("api trace save %s" % api_trace)) File "/vpp/test/vpp_papi_provider.py", line 413, in ppcli return cli + "\n" + str(self.cli(cli)) File "/vpp/test/vpp_papi_provider.py", line 402, in cli r = self.papi.cli_inband(cmd=cli) File "/vpp/src/vpp-api/python/vpp_papi/vpp_papi.py", line 100, in __call__ return self._func(**kwargs) File "/vpp/src/vpp-api/python/vpp_papi/vpp_papi.py", line 414, in f return self._call_vpp(i, msg, multipart, **kwargs) File "/vpp/src/vpp-api/python/vpp_papi/vpp_papi.py", line 634, in _call_vpp msg = self.transport.read() File "/vpp/src/vpp-api/python/vpp_papi/vpp_transport_shmem.py", line 120, in read raise VppTransportShmemIOError(rv, 'vac_read failed') VppTransportShmemIOError: [Errno -1] vac_read failed ---- Change-Id: I767e48c4d03081eb5df6a8aa67da7e192d25e4cc Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-07tests: fix broken test test_gtpu.py TestGtpuUDPPaul Vinciguerra1-1/+1
Test failing due to call to super.tearDown in setUp. ============================================================================== FAIL: test UDP ports ------------------------------------------------------------------------------ Traceback (most recent call last): File "/vpp/test/test_gtpu.py", line 77, in test_udp_port self._check_udp_port_ip4(False) File "/vpp/test/test_gtpu.py", line 48, in _check_udp_port_ip4 self.assertEqual(err, self.ip4_err + 1) AssertionError: 0L != 1 Type: fix Change-Id: Iec4ef5edd3ee11bcd962b77cc8159dee9cb15687 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-06IP-Punt-redirect: allow the use of a FIB path to describe how toNeale Ranns1-3/+6
redirect Change-Id: I2a3ba2a3d73ea8511e3a511855b041432328f0a8 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-06gbp: fix lpm classification with vlanBenoît Ganne1-0/+33
Fix GBP LPM packet classification in the presence of a VLAN header. Change-Id: I2ff63b34f7475d696b10b5a245ff802bbb1ff01a Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-06-05L3 cross connectNeale Ranns1-0/+174
- all packets input on interface X are load-balanced over the set of paths provided. Change-Id: Ic27cb88c4cd5d6d3462570632daff7a43d5a652d Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-05IPSEC: some CLI fixesNeale Ranns1-0/+28
Change-Id: I45618347e37440263270baf07b2f82f653f754a5 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-04Tests: simple refactor in vpp_pg_interface.Paul Vinciguerra1-25/+23
Pull common code into a single method. Type: refactor Change-Id: Ic540d23eebbd17f838ed7a1a9dee80815a27847c Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-04punt: fix the set_punt API/CLI which was rejecting valid portsNeale Ranns1-1/+20
add a UT for the API Change-Id: I93fb6ec2c5f74b991bf7f229250a30c0395b8e24 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-04Punt: specify packets by IP protocol TypeNeale Ranns1-3/+160
Change-Id: I0c2d6fccd95146e52bb88ca4a6e84554d5d6b2ed Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-05-30ipip: refactor ipip.api with explicit typesOle Troan1-37/+67
Use explicit types vl_api_address/prefix in ipip.api. Change-Id: Ib3133cebdbe4437742924efd49cde4009c4cc31b Type: refactor Signed-off-by: Ole Troan <ot@cisco.com>
2019-05-29gtpu: unit-test check udp portsJakub Grajciar1-0/+87
Change-Id: I3efbbb1aefb43ecdf7016541b97343f9ca41f842 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-05-29Tests: vpp_pg_interface. Don't rewrite Dot1AD ethertype.Paul Vinciguerra1-11/+0
Type: Refactor Change-Id: I42f65bcc76e4b0fcfbfe051c1c382a940bff1b3a Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-05-29make test: fix packet counter assertKlement Sekera3-27/+33
Change-Id: Ic6e6ac0629bbf07f7dad1803a85aabfdccbc2035 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-05-29map: Use vl_api_string macros.Paul Vinciguerra1-4/+44
* Add optional tag to api call in tests * Add test for map_domain_dump() for api code coverage. Type: fix Change-Id: I2f7784aecdca4bf9e94de3319f959786e3d2c607 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-05-28l2tp: l2tp-decap-local don't accept packets unless configuredJakub Grajciar1-0/+48
Change-Id: I2e48eb772dc44912192d0684b8ee631d8d975e9e Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-05-28make test: add option in pg interfaces for duplicating packetsAlexandre Poirrier1-2/+12
Change-Id: Ia6d6de5de0414291d5637fb4b8c1480925f646d3 Signed-off-by: Alexandre Poirrier <apoirrie@cisco.com>
2019-05-28Punt: socket register for exception dispatched/punted packets based on reasonNeale Ranns2-326/+505
- add to the Punt API to allow different descriptions of the desired packets: UDP or exceptions - move the punt nodes into punt_node.c - improve tests (test that the correct packets are punted to the registered socket) Change-Id: I1a133dec88106874993cba1f5a439cd26b2fef72 Signed-off-by: Neale Ranns <nranns@cisco.com>