summaryrefslogtreecommitdiffstats
path: root/test
AgeCommit message (Collapse)AuthorFilesLines
2019-10-28tests: switch test framework to python3 by defaultOle Troan2-7/+7
Type: make Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I84d32f022d9dc555837c8916feba04a224cd262a
2019-10-28tests: make RA tests run on VPP timeAndrew Yourtchenko2-7/+21
the IPv6 RA tests take timing into the account, but the time inside VPP may go slightly differently compared to the time inside the driving python thread, if the machine running the tests is heavily loaded. Make a sleep function which sleeps "on VPP time" and use it. Change-Id: I3b34b0164f6e0ec7a619b92ee308089a4a8935e3 Type: test Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2019-10-26l2: l2bd nd termination test instabilityOle Troan1-1/+1
The test for ND event suppression reused the previous test run ipv6 address, and would sometimes consider that a duplicate, and therefore suppressing that one too. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I1b115aa4eba9d57770fa03fcf38b7a1c251cfe88
2019-10-23cdp: re-enable skipped tests for python3Ole Troan1-3/+10
CDP uses the running sytems host name, which caused different failures on different systems. The root cause was an python3 specific error in checksum calculation. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I205436682d46e7e8cbb8c057c03a76dbbcab4d72
2019-10-22tests: test tls casehaiyanx1.zhang1-0/+145
Type: feature Signed-off-by: haiyanx1.zhang <haiyanx1.zhang@intel.com> Change-Id: I071f5face0d489dc967cce1edcffbc1f8fac5c7e Signed-off-by: haiyanx1.zhang <haiyanx1.zhang@intel.com>
2019-10-22tests: DEBUG=gdb[server]-all to debug worker(s)Dave Wallace2-13/+74
Type: test Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I0264451632c1ce780b38a2c15a7e34350fc6d521
2019-10-21geneve: tests support python3Ole Troan1-1/+1
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I0ff4d58c181b2bdf483b8b039ad005c2a4915aa8
2019-10-21bonding: tests support python3Ole Troan1-2/+2
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I6cedb43af4437fdabce75f4a845629c5c2f96f6a
2019-10-21ip: test support python3Ole Troan1-33/+33
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I9c66bce900f78e5fbd435515df94e327ad25c3c6
2019-10-21l2: tests support python3Ole Troan2-2/+2
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Id17bcb65d7eb27f865fc7872b3e485c09f1d29a7
2019-10-21ipsec: tests support python3Ole Troan1-4/+4
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Id13da9371c71c10c12a0120ec89ba21c1ca47524
2019-10-21classify: tests to support python3Ole Troan2-5/+12
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I8af6ee6e5239f0836978baa063a18a01c610279f
2019-10-21bier: tests support python3Ole Troan1-1/+1
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I3cf5295f1a85579a66ba38ca1f74678b45474959
2019-10-21tests: add PID of VPP under test to API dump filename for the testAndrew Yourtchenko1-1/+2
Some testclasses (e.g. IPSec) have methods with the same names, this causes a race when running in parallel to save the API and move it into the test's directory - the name of the file has only the test method name as a discriminator. Saving two traces from two VPP instances "succeeds", in that it silently overwrites the file. But only one mv operation works - the other gives an error "file not found" and fails the test. Solution: add the PID of VPP under test to the API dump filename, this way the filenames become guaranteed unique and the race is avoided. Change-Id: I1bb47ed73369fea0f1bfbf907588a51e2cabfb7f Type: test Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2019-10-21ip: reassembly tests python3 supportOle Troan1-16/+13
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I990d8d521c128e8d4f482e30b3a49cbc11b632d1
2019-10-18ip: add python3 support to punt testsOle Troan1-77/+50
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Ib918d11fb3278a25a92006dcfe3c7c484e7b33ea
2019-10-18gso: python3 support in testsOle Troan1-5/+5
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I166019cc69fd01cb43f1a3fad699f3d2e5ec5b19
2019-10-18ip: ip vrf tests python3 supportOle Troan2-8/+2
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Ie23c9d2d7325be62ef33df2f0562ab41518f7bf4
2019-10-18udp:: support python3 in testsOle Troan1-2/+2
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Iea19d7bc2dfe9736ddefb4419509ccfda7a67eeb
2019-10-18ipsec: make tests support python3Ole Troan3-25/+25
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I3255702e7c562c8d04a91a095e245756c6443a9e
2019-10-17tests: python3 changes for span and aclplugin testsnaramre1-1/+1
Type: fix Change-Id: Ia9f74f951f831cc5c9b5af863db1bb3f7a1a81ff Signed-off-by: snaramre <snaramre@cisco.com>
2019-10-17classify: make tests support python3Ole Troan2-7/+6
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I7c4a12165fa0928fb2b8d99fc1c8d5de16377e7e
2019-10-17tests: python3 fixes for reassembly testssnaramre1-4/+4
Type: fix Change-Id: I0d9b823bd558c48b18af9b0d1e80c30729e64dac Signed-off-by: snaramre <snaramre@cisco.com>
2019-10-17nat: tests support python3Ole Troan1-1/+1
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Ie15ea8f01846f87cb65e90e8762dc941441fc176
2019-10-17vppinfra: test support python3Ole Troan1-1/+2
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Id1794f38fcb776ded9b769141f5f47d7be75f247
2019-10-16tests: python3 changes for ip6 fib testssnaramre1-1/+1
Type: fix Change-Id: Ie7764fec13cbb83b6899c7c33b7b2f8cc5d40c8a Signed-off-by: snaramre <snaramre@cisco.com>
2019-10-16tests: cli wrapper should return stringOle Troan5-12/+12
Python3 fixes. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I648b2142d45dfab9146a02eeb1b12de11103ff9f Signed-off-by: Ole Troan <ot@cisco.com>
2019-10-15tests: python3 version check for enum modulesnaramre1-1/+5
Type: fix Change-Id: Ie210500fba741d3f047e8499957b5b233a78fa36 Signed-off-by: snaramre <snaramre@cisco.com>
2019-10-14gso: Add gso feature arcMohsin Kazmi2-0/+9
Type: refactor Change-Id: Ib4a8e7e64093b2db1deda6663325080bc8337605 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-10-14tests: make pg_start() wait until pg completesAndrew Yourtchenko1-19/+13
A sizable number of tests call pg_start() to get the packets flowing and then immediately expect to have the entirety of the packets gone through. This works on powerful and unstressed hardware, but fails in beautifully random ways under load. This also necessitates the complicated logic of remembering the "zombie captures", then sleeping for some time before cleaning them up.... The solution is simple: in pg_start(), start the generators, wait till they all finish, clean up, done. Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> Change-Id: I930e51b7aae39c9841d22dd905a4d13a465a672b Type: test
2019-10-14tests: log error which happens during connect and wait longer for stats socketAndrew Yourtchenko1-2/+3
Intermittently, a test would start VPP, but no testcases would execute. This would be more probable apparent during the high load or if there is another testcase dumping the core at that moment. Adding the logging to the connection revealed it was the stats socket connection erroring with error -2. Increasing the deadline from 3 seconds to 5 minutes has eliminated this error. Change-Id: I40bd7e642abb9e2aef0238c612e4c34781de5db2 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> Type: test
2019-10-11tests: explicitly wait for the PG to finish before looking for capture fileAndrew Yourtchenko1-0/+15
Rather than only using time-based method of periodically checking whether the pcap file appeared, first check that the packet generator has stopped. To make this change fail-safe, have a 5-minute timeout on this activity, just in case the things go terribly wrong. Type: test Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> Change-Id: Id16b2802b2de8a4cafb5d9f0a8c9ba62ec89dc32
2019-10-11tests: extra logging in reassembly testsKlement Sekera1-0/+10
Type: test Change-Id: Ia09c3149490e47e49e59544ab1680a8160e60ac8 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-10-10tests: add cli_return_response to vpp_papi_providerDave Barach1-2/+13
To improve gcov/lcov code coverage stats, it's necessary to send incorrect debug CLI commands; to force vpp into debug CLI error paths. cli_return_response() sends commands and returns the response object, so test vectors can handle failures. Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I4fab591c9d2e30c996f016e18e4fd69b9c5bed06
2019-10-10geneve: API cleanupJakub Grajciar1-16/+14
Use consistent API types. Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: I1964e4f0afe6f030ae9c8e28fcba5fd81aa1f130
2019-10-09dhcp: dhcp6_pd_client_cp API cleanupJakub Grajciar1-10/+0
Use consistent API types. Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: If6c102a53d074cba7eca6b6af9855aa4486f38cc
2019-10-09build: clean up make help outputDave Wallace1-3/+3
This change is designed to help the uninformed find the right way to run extended tests by using the test-all[-debug] targets. 'make test EXTENDED_TESTS=y' fails to build as it has a dependency on 'vom-install' which is conveniently included in test-all[-debug]. - clarify test-all[-debug] description and make test-help description - Also align indentation of make help output Type: style Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: Ief54cc8a5af68c052aacb0d660237c5eb63451b5
2019-10-09mpls: support fragmentation of mpls output packetRajesh Goel1-0/+56
Type: fix Signed-off-by: Rajesh Goel <rajegoel@cisco.com> Change-Id: Ie4372c5cf58ab215cdec5ce56f8a994daaba2844
2019-10-08tests: handle unicode charactes in cli outputKlement Sekera1-1/+2
Type: fix Change-Id: Ic4fb53e6d10a1de155a3088be81d53d9efeb0c0f Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-10-07dhcp: Move to pluginNeale Ranns4-2584/+0
Type: feature Change-Id: I3fe27a8ef577741d9a5c4f090ec91cf68fb44fe3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-10-06ip: Fix IP unnumbered dump of one interfaceNeale Ranns1-0/+9
Type: fix Change-Id: I35fb6fdfba50c4a59cf1ffb94cb51487bcf5afc9 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-10-03dhcp: API cleanupJakub Grajciar4-254/+283
Use consistent API types. Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: Ia63d920788add2584060a240321acced7a471640
2019-09-30dhcp: dhcp6_ia_na_client_cp API cleanupJakub Grajciar1-6/+0
Use consistent API types. Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: Ie2d2c74ed3832d137e808e0b52348b4e660feb6f Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-09-27ipsec: support 4o6 and 6o4 for tunnel protectNeale Ranns1-2/+40
Type: feature Change-Id: Ib2352ca4c7abf4645f21fa16aaaf27408890a2bf Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-09-26ip: add shallow virtual reassembly functionalityKlement Sekera1-1/+342
Type: feature Change-Id: Ibc8334e26c7e6f6120696c3e313b6e11d73dab99 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-09-25ip: respect buffer boundary when searching for ipv6 headersKlement Sekera1-2/+19
Type: fix Change-Id: I5a5461652f8115fa1270e20f748178fb5f5450f2 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-09-25ip: refactor reassemblyKlement Sekera1-14/+16
this is a preparation step for introducing other reassembly types Type: refactor Change-Id: I197e299dbd729b00eead31667913b8ceff915d63 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-09-23tests: fix test-checkstyle to check plugin testsDave Wallace1-1/+1
Type: fix Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I93eb0ae4338247fa2479f8e419483d1593436dc7
2019-09-19api: split vl_api_prefix into twoOle Troan1-1/+1
One type for address with prefix and one type for prefix. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Icfec51d9b7d5cde1d69fbecdd97498688ab7b295 Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Klement Sekera <ksekera@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com>
2019-09-18tests: split up the long running IPSec tests into separate classesAndrew Yourtchenko1-82/+398
Type: test Change-Id: Ieeae7f1653f5f2e8e49f258871b389ef8954c90b Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>