Age | Commit message (Collapse) | Author | Files | Lines |
|
The stats-segment validation/clear logic for acl counters was wrong,
fix it. Also add the code to the unittests to cover that case,
add a vat command to enable/disable counters, clean up
the unnecessary endian conversion and remove the stray clib_warning()
Change-Id: I421297a92e4aeb885c468c72a97cec25981df615
Type: fix
Ticket: VPP-1744
Fixes: f995c7122ba0d024b17bc3232e8edd18d5e25088
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
(cherry picked from commit 4c945dacb9ff9da731301feb26b1edb4ac00e8bd)
|
|
Type: refactor
Change-Id: Iaef9091e1d057110530255e644fad1c298418966
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
This algorithm was missed in last improvements.
Type:fix
Signed-off-by: Dmitry Vakhrushev <dmitry@netgate.com>
Change-Id: Ib818cbdcdd1a6f298e8b0086dac4189cc201baa3
|
|
Type: test
Change-Id: Ia6dad86d02f6f665a3e6960812b2527eaabb65f1
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Adding a prefix to an interface was not permitted if it overlapped
with another prefix on an interface which used the same FIB.
Loosen the restriction. Allow 2 or more addresses from the same
prefix on a single interface. Reference count the prefix to figure
out when a glean/connected route for the prefix needs to be added
or removed.
Added unit tests to check that the route is only removed when all
addresses in the prefix are removed from the interface.
Change-Id: I1a962ecb5e1ee65fc6d41f98a4cc097a51a55321
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: test
Change-Id: I4dd685f9acd4d467e0967e6fdd428558ffc8b209
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: test
Change-Id: I1dfbeef08a4f112551450682fc4040820251485b
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: test
Change-Id: I0fafaebbb1f70488e0bc7d21da778d55fe15c3f5
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: test
Change-Id: I48650473591aa181167cf3a86ed2f5da58a81072
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
Change-Id: I1632ff23b1bf6d91aa3406c95ebd6ef0aa595f35
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Fixes: 039cbfe2
Signed-off-by: Prashant Maheshwari <pmahesh2@cisco.com>
Change-Id: Idca91c73758824688dd6ce61df994be66753d838
|
|
Type: fix
Change-Id: I1fa8c5326d6f22cfb8dd40e97d8a22d11a716922
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- lb_vip_dump/lb_vip_details - get all vip.
- lb_as_dump/lb_as_details - get all as list per vip.
- adds api unit test.
- adds vpp_lb to test framework.
Ticket:
Type: feature
Change-Id: I24be50d62c5234f3535cc840603ddd9df7eb3f07
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Type: fix
Fixes: 22e9cfd760be613f33a4135e9247729b64619cc6
Change-Id: Idb198642e439dc3d54c04d8bde9d3e8382ebf830
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Add gso option in create vhost interface to support gso and checksum
offload.
Tested with the following startup options in qemu:
csum=on,gso=on,guest_csum=on,guest_tso4=on,guest_tso6=on,guest_ufo=on,
host_tso4=on,host_tso6=on,host_ufo=on
Type: feature
Change-Id: I9ba1ee33677a694c4a0dfe66e745b098995902b8
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
Type: feature
store: write a QoS value into the buffer meta-data
record: Extract a QoS value from a packet header and store it.
mark: Make a change to the content of a packet header by writing a stored
QoS value
Change-Id: I07d1e87dd1ca90d40ac1ae1774fee1b272cab83f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Now that we have support for f64:
- create explicit types for timestamp(datetime)/timedelta
- update log_details to use timestamp and remove redundant string representation.
If you need the string representation, in python do str(timestamp).
If you prefer the raw f64 value, the client can pass in the
_no_type_conversion option.
Type: feature
Change-Id: I547b5fa7122d2afa12628b7db0192c23babbbae8
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
In a lot of places within the unit tests pg_start() starts
the capture with an already existing capture running
for the same test.
If the pcap file already exists, then it is renamed and there
is no problem.
However, there is a potential for race if the previous
pg_start() has enabled the capture, but the check for
renaming it happened just slightly earlier than the first
packet has arrived.
Then a second call to pg_start() will hit a check that
a file exists, and will cause an error. This is especially
visible when running the tests in parallel due to increased
load.
Solution: disable the capture before enabling it.
This will flush the aready running capture and eliminate the race.
The additional delay that flushing of the pcap creates has exposed
several other race conditions:
NAT tests: Some of the NAT reassembly tests
verify that the entries were added to the reassembly data structures,
but do so by comparing the quantities of entries. With the default
timeout being 2s, some of the entries might timeout,
resulting in a bogus test failure.
Solution: Bump the timeout to 20s for the affected tests.
Punt tests: nr_packets == 3 makes test intermittently fail,
nr_packets > 3 make it reliably fail, and nr_packets = 2 works
Solution: set nr_packets == 2 for the time being
IGMP tests: the leave-group calls get a spurious packet
from the time the new groups were configured
Solution: add 1 second delay before starting to delete the groups
Type: test
Change-Id: I931182a7b2860cf670e030ee7da8038f6e87356d
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: feature
Change-Id: Icb1bd3fce768aebf8919c63a104f771ca7fa1d6f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: I01eeedf8d5015b07b9422c65afe78bfe8177c22c
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Previously, the only option was to wipe/rebuild all the test dependencies.
Type: make
Change-Id: Ia95d6e800f67bef033dcf614dbfa249c3e43159d
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: feature
Change-Id: I72676495a85fbecc946aa266a75234cce70c3a5e
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: feature
- Define the ip_dscp_t and use in the IP headers
- Add DSCP setting to the DHCP client for use with packet TX
Change-Id: If220dde0017ea78793747d65f53e11daf23a28fa
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
this means DHCP packets are subject to the IP features configured on the interface
- the unicast packets already were sent throught the adj
- added UT for DHCP client sending a unicast renewal
Change-Id: Id50db0b71822f44bf7cb639a524195cdc9873526
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
Change-Id: If517d10c318fc17fdbd797fac8d974d9851f6442
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
implement per-acl-number counters in the stats segment.
They are created during the ACL creation,
the counters are incremented in the dataplane using
the new inline function with the extra parameter being
the packet size. Counting in shared segment adds
a noticeable overhead, so add also an API to
turn the counters on.
Type: feature
Change-Id: I8af7b0c31a3d986b68089eb52452aed45df66c7b
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: test
Depends-on: https://gerrit.fd.io/r/#/c/20484/
Change-Id: I140132cfcc4347035fe2bb9919f8e7923342940f
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: feature
Change-Id: I514b40026986f3828c8727453456b20a0a45f3af
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
Change-Id: Ib24547a7c4c73ceb5383d1ca8f14ec40e6a90f01
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Several Fixes:
1 - Anti-replay did not work with GCM becuase it overwrote the sequence
number in the ESP header. To fix i added the seq num to the per-packet
data so it is preserved
2 - The high sequence number was not byte swapped during ESP encrypt.
3 - openssl engine was the only one to return FAIL_DECRYPT for bad GCM
the others return BAD_HMAC. removed the former
4 - improved tracing to show the low and high seq numbers
5 - documented the anti-replay window checks
6 - fixed scapy patch for ESN support for GCM
7 - tests for anti-reply (w/ and w/o ESN) for each crypto algo
Change-Id: Id65d96b6d1d4dd821b2ab557e87468fff6d70e5b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
Change-Id: Ic720d56a6f8901efde2a58519bc9aa553205a9a6
Signed-off-by: Gary Boon <gboon@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
New pip releases can break pip-tools. This commit pins the version of
pip used in the test virtualenv to prevent uncontrolled breakage.
This fixes the current issue in make test:
TypeError: __init__() got an unexpected keyword argument 'index_urls'
Change-Id: I3b7ecb31e651401ada0d357e2bf093c91c934565
Type: feature
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
If numa-only is set, Only slaves on local numa node
transmit pkts if have at least one, otherwise the bond
interface works as usual.
CLI change:
create bond mode lacp [load-balance { l2 | l23 | l34 } {numa-only}]
[hw-addr <mac-address>] [id <if-id>]
The new member "u8 numa_only;" is also added to bond_create_if_args_t.
Type: feature
Change-Id: Icdccedafb0738d8c9d4a5acce909ce562428c071
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
|
|
Type: feature
When admin status is changed on an interface, add or delete the
routes for the IPv4 addresses configured on that interface.
This is already being done for IPv6 interface addresses.
Change-Id: Ib1e7dc49c499921dd287e075640243520ffa5589
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: feature
Change-Id: I87cc1168466f267e8c4bbec318401982f4bdf03a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Discovered running test-debug job in CI.
- fix missing paren () around format value.
Type: test
Change-Id: Iebddd3035a435f8ad1cb1d6fa4e8e8c2d4ddaf96
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
This changeset removes keys that are invalid in papi kwargs.
Type: test
Change-Id: I6568f91cd240dc1927540396210b429f6ce82c0a
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
There's no call for an SPI-0 punt reason with UDP encap, since
it's only with UDP encap that the ambiguity between IKE or IPSEC
occurs (and SPI=0 determines IKE).
Enhance the punt API to dum ponly the reason requested, so a client
can use this as a get-ID API
Change-Id: I5c6d72b03885e88c489117677e72f1ef5da90dfc
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
Change-Id: I9d3a73a6a6048fa0189f7fa6306a638279977fcd
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
* test_ipsec_tun_if_esp.TestIpsecGreTebIfEsp
* test_ipsec_esp.TestIpsecEspAll
add keepalive messages before each algo/engine to prevent test timeout
Change-Id: I726f3f9613bab02a65e65542cee494c68176ded7
Signed-off-by: juraj.linkes <juraj.linkes@pantheon.tech>
|
|
Identified in post-merge review.
Type: test
Change-Id: I46e19285479437561a43975ba9b5cb68f478736c
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
This solves the ownership of vxlan-gbp tunnels. When the last reference of these goes away they need to be deleted. Currently there are two owners; gbp_itf via gef_itf and the lock held by the gbp_endpoint_location_t. The problem is that the
loc removes its reference whilst the fwd still holds the gbp_itf, and things go wrong.
This change moves the lifecycle management of the vxlan-gbp tunnel to the gbp_itf. When the last lock of the gbp_itf goes, so does the tunnel. now both the EP's loc and fwd can hold a lock on the gbp_itf and it's only removed when required.
The other change is the management of the 'user' of the gbp_itf. Since each user can enable and disable different features, it's the job of the gbp_itf to apply the combined set. determining a unique 'uesr' from the caller was near impossible, so I moved that to the gbp_itf, and return the allocated user, hence the 'handle' that encodes both user and interface.
The hash table maps from sw_if_index to pool index.
Change-Id: I4c7bf4c0e5dcf33d1c545f262365e69151febcf4
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: Ic153b2bc754ee69949f6e5fd412c474f9ed722f0
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Introduce a new class, that returns the truthiness of a env var.
Since an environment variable is just a string, it would normally
be true if not unset. The new class returns true when the env var is
set to a string that would be considered true.
Type: test
Depends-on: https://gerrit.fd.io/r/20484
Change-Id: I90ef010156f6fec246bde5c0e208ced1869b180f
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Reduces the vpp image virtual size by multiple gigabytes
Add a "show bihash" command which displays configured and current
virtual space in use by bihash tables.
Modify the .py test framework to call "show bihash" on test tear-down
Type: refactor
Change-Id: Ifc1b7e2c43d29bbef645f6802fa29ff8ef09940c
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
clib_net_to_host_f64, clib_host_to_net_f64 are now implemented as '=',
https://gerrit.fd.io/r/#/c/20406/ set papi to match.
- all f64 api references are now wrapped with
clib_net_to_host_f64 or clib_host_to_net_f64.
IEEE f64 endianess is not defined. If clib_net_to_host_f64 and
clib_host_to_net_f64 are later defined in VPP as big-endian, it is
a single character change in the papi vpp_serializer.
Note: This breaks the api in a manner that would not be detected by
the flag day initiative. The scope is small. This only impacts map.api,
which applied the u64 transformation, while the gbp api uses '='.
The implementation of "=" raises issues for the papi socket implementation
if used between systems of differing endianess. See Vratko's comments.
- Added get_f64_endian_value() to api to allow client to verify endianess of f64's.
Type: fix
Depends-on: https://gerrit.fd.io/r/#/c/20484/
Change-Id: I00fc64a6557ba0190398df211aa0ea5c7eb101df
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: test
Change-Id: I0a58cc19bdfb73eabadbf6eb49b57e8db96959b5
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- Replaces the need to screen scrape "show log".
- Adds an api to return the system time. When running over a socket, the
api client may have different time than the vpp host.
expected use:
vpp_time_before_command = self.vapi.show_vpe_system_time_ticks().vpe_system_time_ticks
<run some commands>
log_output = self.vapi.log_dump(start_timestamp=vpp_time_before_command)
Depends-on: https://gerrit.fd.io/r/20484
Depends-on: https://gerrit.fd.io/r/#/c/19581/
==============================================================================
TestVpeApi
==============================================================================
log_details(_0=838, context=3, timestamp_ticks=2.4954863503546518e+48, level=<vl_api_log_level_t.VPE_API_LOG_LEVEL_WARNING: 4>, timestamp=u'2019/07/04 20:35:41:281', msg_class=u'buffer', message=u'vlib_physmem_shared_map_create: clib_mem_create_hugetlb_fd: open: No such file or directory\n\n')
log_details(_0=838, context=3, timestamp_ticks=1.6101902879480125e+159, level=<vl_api_log_level_t.VPE_API_LOG_LEVEL_WARNING: 4>, timestamp=u'2019/07/04 20:35:41:281', msg_class=u'buffer', message=u'falling back to non-hugepage backed buffer pool')
test_log_dump_default (test_vpe_api.TestVpeApi) OK
log_details(_0=838, context=13, timestamp_ticks=2.4954863503546518e+48, level=<vl_api_log_level_t.VPE_API_LOG_LEVEL_WARNING: 4>, timestamp=u'2019/07/04 20:35:41:281', msg_class=u'buffer', message=u'vlib_physmem_shared_map_create: clib_mem_create_hugetlb_fd: open: No such file or directory\n\n')
log_details(_0=838, context=13, timestamp_ticks=1.6101902879480125e+159, level=<vl_api_log_level_t.VPE_API_LOG_LEVEL_WARNING: 4>, timestamp=u'2019/07/04 20:35:41:281', msg_class=u'buffer', message=u'falling back to non-hugepage backed buffer pool')
test_log_dump_timestamp_0 (test_vpe_api.TestVpeApi) OK
test_log_dump_timestamp_future (test_vpe_api.TestVpeApi) SKIP
test_show_vpe_system_time_ticks (test_vpe_api.TestVpeApi) SKIP
==============================================================================
TEST RESULTS:
Scheduled tests: 4
Executed tests: 4
Passed tests: 2
Skipped tests: 2
==============================================================================
Test run was successful
Type: feature
Change-Id: I893fc0a65f39749d2091093c2c604659aadd8447
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
from the draft:
3. Backward Compatibility
VXLAN [RFC7348] requires reserved fields to be set to zero on
transmit and ignored on receive.
Change-Id: I98544907894f1a6eba9595a37c3c88322905630e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Removed sctp buffer metadata from vnet/buffer.h, added it to the
plugin. Add registration APIs for plugin-based vlib_buffer_opaque /
opaque2 decoders, used by "pcap dispatch trace ..." for display in the
wireshark dissector.
Type:refactor
Not actively maintained.
Change-Id: Ie4cb6ba66f68b3b3a7d7d2c63c917fdccf994371
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|