summaryrefslogtreecommitdiffstats
path: root/test
AgeCommit message (Collapse)AuthorFilesLines
2018-05-02Scapy; update to release 2.4.0Neale Ranns1-1/+1
Change-Id: Ibcae49ab106efa9cd0ff60be60904ac5a2fc0b65 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-04-27IPv6 NS: use the mcast rewrite node to fill in the destination MACNeale Ranns1-1/+1
- move the IPv6 incomplete and glean node to ip6_neighbour.c (so it has access to ip6_neighbour_main_t) - use the RA info config on the interface to find the multicast adj to use Change-Id: I835e419072abe54fb09dafb0e7eb0a9e50eba1af Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-27Move VOM to extras/vomDamjan Marion1-10/+36
Change-Id: Iea174f03dfba3bd06024db0f0cc373532300dcae Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-25GBPv6: NAT66 actions for GBPNeale Ranns1-58/+150
Change-Id: I379150a88f2d53d6281be41e8bad6fc4f4e88a71 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-04-24NAT44: one-armed NAT and identity mapping (VPP-1212)Matus Fabian1-0/+3
Change-Id: I228728bacfca6056dc409a96de1bffb9cadcd3e6 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-04-19Add special Twice-NAT feature (VPP-1221)Juraj Sloboda2-96/+132
When enabled then Twice-NAT is applied only when source IP equals destination IP after DNAT Change-Id: I58a9d1d222b2a10c83eafffb2107f32c1b4aa3a8 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-04-18typo fix: UNKOWN -> UNKNOWNAndrey "Zed" Zaikin1-1/+1
Change-Id: I008a4d7ad7160d1f07e7ceef712a5318a9368308 Signed-off-by: Andrey "Zed" Zaikin <zed.0xff@gmail.com>
2018-04-18Fix PPPoE test case issuesHongjun Ni2-42/+3
Change-Id: I8b57250d5578ec7979c99da15d0ed7d0b70a8872 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2018-04-17Add logging supportDamjan Marion2-2/+7
Change-Id: Ieac9cf50156dbbb4962411e900d59256441915ef Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-04-17IP mcast: allow unicast address as a next-hopNeale Ranns3-8/+64
Change-Id: I5e679f2601e37688f2768620479dc2efb7d19ca3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-17ACL based forwardingAndrew Yourtchenko3-0/+359
A poor man's flow switching or policy based rounting. An ACL is used to match packets and is associated with a [set of] forwarding paths that determine how to forward matched packets - collectively this association is a 'policy'. Policies are then 'attached', in a priority order, to an interface when thaey are encountered as an input feature. If a packet matches no policies it is forwarded normally in the IP FIB. This commit is used to test the "ACL-as-a-service" functionality, which currently compiles, and the existing traffic ACL tests pass in both hash and linear modes. Change-Id: I0b274ec9f2e645352fa898b43eb54c457e195964 Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> Signed-off-by: Ole Troan <ot@cisco.com>
2018-04-17make test: ipsec test cleanupKlement Sekera2-13/+9
Change-Id: If813346b665468b25aaf5d95629bcad87212aa3e Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-04-15vhost: add vhost interface add/delete/dump API test cases to make testSteven3-0/+160
The vhost binary APIs for add/delete/dump interface were available long ago. But no unit tests were ever added in make test. This patch is to retrofit the missing unit tests. Change-Id: I489521b5ae359a1168ac5880a1f13a5f7e93ce4a Signed-off-by: Steven <sluong@cisco.com>
2018-04-13Revert "MTU: Setting of MTU on software interface (instead of hardware ↵Damjan Marion2-65/+7
interface)" This reverts commit 70083ee74c3141bbefb185525315f1b34497dcaa. Reverting as this patch is causing following crash: 0: /home/damarion/cisco/vpp3/build-data/../src/vnet/devices/devices.h:131 (vnet_get_device_input_thread_index) assertion `queue_id < vec_len (hw->input_node_thread_index_by_queue)' fails Aborted Change-Id: Ie2a365032110b1f67be7a9d832885b9899813d39 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-13NAT66: Do not translate if packet not aimed at outside interfaceJuraj Sloboda1-0/+23
Change-Id: Id5a2a90d81cc9cb87cb6fb89ac2f4ca3cbcb51e2 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-04-13MTU: Setting of MTU on software interface (instead of hardware interface)Ole Troan2-7/+65
Change-Id: I98bd454a761a1032738a21edeb0fe847e801f901 Signed-off-by: Ole Troan <ot@cisco.com>
2018-04-13GBP V2Neale Ranns3-185/+934
update the GBP plugin to implement the full NAT feature set of opflex agent Change-Id: Ic06a039c889445ed0b9087fa1f292634192b0f8d Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-04-13Enable check of VRF reset - IPv4Jan Gelety3-71/+122
Change-Id: I60818a22f543f9a3c3f62f9c67f5e4239e5b045a Signed-off-by: Jan Gelety <jgelety@cisco.com>
2018-04-12VCL IOEvent external API callbackKeith Burns (alagalah)1-8/+6
Change-Id: I417357b00c43b27872aa3f681335bdc1ef574eca Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com> Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2018-04-10test: Fix issues with new version of pycodestyle (VPP-1232)Chris Luke3-3/+5
- Ignore warnings W504 (newline after binary operator) which otherwise occurs a significant number of times. - Fix two instances of lines >79 chars. Change-Id: I8cef56f8afc237187995e638e610c8c0554e2bb5 Signed-off-by: Chris Luke <chrisy@flirble.org>
2018-04-09jvpp: log error output of Java process on test failureMarek Gradzki1-3/+6
helps troubleshooting JVpp test failures. Change-Id: I4747832a0610ace168285bfe423c506ba4e00700 Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
2018-04-09make test: fix failure on centosKlement Sekera1-1/+1
Change-Id: I1fcc742699a60ef99ce97b35f7b964ee6ad29ddf Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-04-03Makefile: Alter VPP_PYTHON_PREFIX for preloading depsEd Kern1-0/+2
Allow setting of VPP_PYTHON_PREFIX to alternate location so the python prereqs can be installed into base image Also added test-dep trigger to isolate dependency install from actual test run Change-Id: Ia80f5dbf71bc24eb46cd6586bcadd474ef822704 Signed-off-by: Ed Kern <ejk@cisco.com>
2018-04-03reassembly: bug fixesKlement Sekera1-2/+1
This change fixes a bug which would corrupt features infra by making feature infra resistant to double-removal. It also fixes 'out of memory' issue by properly initializing the bihash tables. Change-Id: I78ac03139234a9a0e0b48e7bdfac1c38a0069e82 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-03-31make test: print a warning in case a core_pattern contains a filter programAndrew Yourtchenko3-0/+19
The default config on Ubuntu 16.04.4 desktop results in truncated cores when running make test which coredumps. Uninstalling the filter program (apport) makes the corefiles normal size. Print a warning about that fact, so the others potentially affected didn't have to wonder. Change-Id: Iba4b0a2765a25100d6e24fd7f4de0e0339efd835 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-03-29ip6: fix ip6-local urpf checkingFlorin Coras1-5/+3
Use sw_if_index[VLIB_TX] if set as fib index when doing the urpf check. Change-Id: I5ec3e7f7a54c6782704d91e9a5614fd0f7f9e3de Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-03-29tcp: fix fib index buffer taggingFlorin Coras1-19/+25
Change-Id: I373cc252df3621d44879b8eca70aed17d7752a2a Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-03-28NAT44: make 1:1NAT for DHCP addressed interface persistentMatus Fabian1-12/+48
Static mapping is not deleted from resolution vector after address is set on interface. Change-Id: Ib7c45ca2e307123d101248c5a1b17d130ac32cd0 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-03-28test: fix VppNeighbor.query_vpp_configNeale Ranns1-14/+10
Change-Id: I2a879ee9d5065a14eb351eccd0350693eb1ff521 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-03-27VOM: bond: Add support for LACPMohsin Kazmi1-0/+93
Change-Id: I0245263b212142858d3305b0f365d8342912dbb9 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-03-26VCL: add IPv6 to socket_test.sh and make testDave Wallace2-38/+432
Change-Id: If3827828062a46f1cce43642535333f677f06e62 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2018-03-24make test: fix DEBUG=gdb/gdbserver optionsKlement Sekera1-4/+3
Change-Id: I5a7fa3b1c247ad5611907db27835724dcd31f575 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-03-24make test: fix ext build on centosKlement Sekera1-1/+1
Change-Id: I2b01f73c4b10a230310a65b6f35526818bf4f76d Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-03-24make test: use vpp-dev repo for py-lispnetworkingKlement Sekera1-1/+1
Change-Id: Ia87d55cad1d466a4cc624f06abbc322cddb5608c Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-03-24make test: enhance core-file informationKlement Sekera2-17/+32
Change-Id: I1283960a9a49f6d70b9d7b7793cfb345c22ccdea Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-03-23Add client hw address to DHCP offer and ack in test caseNeale Ranns1-6/+11
Change-Id: Ifc9bb4ea39b504372a6a39bbf56c29761d0c6111 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-23acl-plugin: improvements in 'show acl-plugin macip acl' CLIAndrew Yourtchenko1-0/+6
- allow to optionally specify the specific MACIP ACL index: 'show acl-plugin macip acl [index N]' - after showing the MACIP ACL, show the sw_if_index of interface(s) where it is applied. Also, add some executions of this debug commands to the MACIP test case for easy verification. Change-Id: I56cf8272abc20b1b2581b60d528d27a70d186b18 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-03-23Drop dhcp pkts w/ hardware address mismatchesDave Barach1-0/+1
Add a few dhcp client rx packet/state counters Temporarily disable the dhcp client unit test, since it trips over the newly-added hardware address check. Change-Id: I7f68607e6ed3d738cba357c3fe76664a99b71cd8 Signed-off-by: Dave Barach <dave@barachs.net>
2018-03-23acl-plugin: make test: do not use a debug CLI where API can be usedAndrew Yourtchenko1-6/+3
Parsing the list of applied ACLs from the debug CLI output is not a good idea, since the debug CLI can and will change. Fix that. Change-Id: Ia47214863f2658a54219f59cb974b5cbc536f862 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-03-23make test: code cleanupKlement Sekera3-57/+38
Change-Id: Ic689de569e5b6e6209d16d6acdb13c489daca1f5 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-03-23acl-plugin: make test: add a test which deletes an interface with applied ACLAndrew Yourtchenko1-0/+39
There was no test coverage for a scenario of an interface having an ACL and that interface being deleted. Add a basic sanity test which applies an ACL to an interface and then deletes that interface. Change-Id: Ib6462e02cf69f1173125ac2481c608f68eb389ac Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-03-23acl-plugin: make test: shuffle applied ACLs as part of the testsAndrew Yourtchenko2-1/+85
During the testing of 94f9a6de3f706243d138e05b63fef1d5c8174f6c I realized there was no test coverage for the cases where the ACLs are added then modified while having beein applied. This change adds some simple shuffling to l2l3 ACL test set, whereby after each of the ACLs being applied, a few extra ACLs are applied at the front and the back of the list, and are changed several times, the base for the changes being the set of all the ACEs that are being applied previously. After these few shuffles, the routine restores the applied ACLs and proceeds to the test as usual. Change-Id: Ieda2aa5b7963746d62484e54719309de9c1ee752 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-03-23IGMP: coverity fixes and remove checks for scapy IGMPv3Neale Ranns1-16/+1
Change-Id: Ic2eddc803f9ba8215e37388a686004830211cf6f Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-03-22NAT44: interface output feature and dst NAT (VPP-1200)Matus Fabian1-0/+59
Do not translate packet which go out via nat44-in2out-output and was tranlated in nat44-out2in before. On way back forward packet to nat44-in2out node. Change-Id: I934d69856f0178c86ff879bc691c9e074b8485c8 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-03-21bond: Add bonding driver and LACP protocolSteven3-0/+405
Add bonding driver to support creation of bond interface which composes of multiple slave interfaces. The slave interfaces could be physical interfaces, or just any virtual interfaces. For example, memif interfaces. The syntax to create a bond interface is create bond mode <lacp | xor | acitve-backup | broadcast | round-robin> To enslave an interface to the bond interface, enslave interface TenGigabitEthernet6/0/0 to BondEthernet0 Please see src/plugins/lacp/lacp_doc.md for more examples and additional options. LACP is a control plane protocol which manages and monitors the status of the slave interfaces. The protocol is part of 802.3ad standard. This patch implements LACPv1. LACPv2 is not supported. To enable LACP on the bond interface, specify "mode lacp" when the bond interface is created. The syntax to enslave a slave interface is the same as other bonding modes. Change-Id: I06581d3b87635972f9f0e1ec50b67560fc13e26c Signed-off-by: Steven <sluong@cisco.com>
2018-03-21UDP Encap countersNeale Ranns1-0/+5
Change-Id: Ib5639981dca0b11b2d62acf2c0963cc95c380f70 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-21reassembly: feature/concurrencyKlement Sekera6-345/+203
This change makes ip reassembly an interface feature, while adding concurrency support. Due to this, punt is no longer needed to test reassembly. Change-Id: I467669514ec33283ce935be0f1dd08f07684f0c7 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-03-20FIB Interpose SourceNeale Ranns3-18/+39
The interpose source allows the source/provider to insert/interpose a DPO in the forwarding chain of the FIB entry ahead of the forwarding provided by the next best source. For example if the API source (i.e the 'control plane') has provided an adjacency for forwarding, then an interpose source (e.g. a monitoring service) couold interpose a replicatte DPO to copy the traffic to another location AND forward using the API's adjacency. To use the interose feature an existing source (i.e FIB_SOURCE_PLUGIN_HI) cn specifiy as a flag FIB_ENTRY_FLAG_INTERPOSE and provide a DPO to interpose. One might also consider using interpose in conjunction with FIB_ENTRY_FLAG_COVER_INHERIT to ensure the interpose object affects all prefixes in the sub-tree. Change-Id: I8b2737b985f8f7c08123406d0491881def347b52 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-19IGMP pluginJakub Grajciar3-0/+398
- host mode: igmp_listen - API to signal that the host has joined an (S,G) - route mode: igmp_enable - API to enable the reception of host IGMP messages igmp_event - API to report the host join/leave from an (S,G) Change-Id: Id180ec27dee617d33ab3088f5dcf6125d3aa9c8f Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-03-19Scapy upgrade to 2.4.0.rc5Neale Ranns11-10/+211
- many of the patches fd.io applies in test/patches/2.3.3 are now upstreamed in 2.4 - 2.4 adds support for IGMPv3 which is my main motivation for the upgrade Change-Id: If2c0a524e3cba320b4a5d8cd07817c6ea2bf0c5a Signed-off-by: Neale Ranns <nranns@cisco.com>