Age | Commit message (Collapse) | Author | Files | Lines |
|
Upon encapsulation of L2 frames, IETF has replaced the NextHeader value from 59 (IPv6 No Next Header) to 143 (Ethernet).
https://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml
Type: fix
Signed-off-by: pcamaril <pcamaril@cisco.com>
Change-Id: I88aa5590c81d16700ff7a0bbe6337e113179496e
Signed-off-by: pcamaril <pcamaril@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie8bc5c9a03e858487cf565b4e9b520e6b496337a
|
|
Type: fix
Change-Id: I8f81cd6c29ff8cb4f0b4850b8b1f6611d89ddb38
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Make test framework python3 version independence.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I1ef1eb77b6c1f422ebc4dad0818f87c8e587b34b
|
|
Avoid using vec_del1() for directory vector to keep indexes valid all
the time.
There are state counters for each slave in LACP bond mode which can be
dynamically created and removed. Vector index is used to access these
counters. But also vec_del1() is used to remove counter from vector.
This function changes the index of the last element, so after this we
are unable to access ex-last element using old index.
As a result it is not possible to add-del-add two interfaces to the LACP
bond:
DBGvpp# create bond mode lacp
BondEthernet0
DBGvpp# create packet-generator interface pg1
DBGvpp# create packet-generator interface pg2
DBGvpp# bond add BondEthernet0 pg1
DBGvpp# bond add BondEthernet0 pg2
DBGvpp# bond del pg1
DBGvpp# bond del pg2
DBGvpp# bond add BondEthernet0 pg1
DBGvpp# bond add BondEthernet0 pg2
bond add: /if/lacp/1/3/partner-state is already register
Type: fix
Signed-off-by: Vladimir Isaev <visaev@netgate.com>
Change-Id: I2c86e13905eefdef6233369cd4ab5c1b53d123bd
|
|
Type: fix
Ticket: VPP-1831
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I655964b22021ac38cbced577091a1156286d4fd6
|
|
Type: refactor
The Tunnel Endpoint Informatiob Base (TEIB) is a better
description of what it is (a mapping between tunnel endpoint
address, in the overlay, and next-hop address, in the underlay)
whereas NHRP is one instanc eof a control protocol that might add
such endpoints.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Idcb2ad0b6543d3e5d9f6e96f9d14dafb5ce2aa85
|
|
Apply exponential smoothing to the clock rate update calculation in
clib_time_verify_frequency(), with a half-life of 1 minute and a
sampling frequency of 16 seconds. Within 5 minutes or so, the
calculation converges
With each rate recalculation: reset total_cpu_time based on the kernel
timebase delta since vpp started, and the new clock rate
Improve the "show clock [verbose]" debug CLI command.
BFD echo + echo fail tests marked off until the BFD code can be
reworked a bit.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I24e88a78819b12867736c875067b386ef6115c5c
|
|
Type: feature
common funcitons across IP-in-IP and GRE tunnels for encap/decap
functions
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I325b66824878d843af167adfe5a7a96b0ab90566
|
|
Type: feature
plus fixes for gre
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I0eca5f94b8b8ea0fcfb058162cafea4491708db6
|
|
Type: refactor
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I18dcdb7af3e327f6cacdbcb1e52b89f13d6ba6e2
|
|
More RFC compliance.
Ticket: VPP-1816 BFD: peer discriminator not reset on timeout
Type: fix
Change-Id: I68063c18097d282b3527e3fb485c1d0d1fd1b0c8
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: test
Change-Id: I97e02ebc5989eee794511c1ed6049e300be7d64e
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Traceback (most recent call last):
File "run_tests.py", line 886, in <module>
exit_code, suites = parse_results(results)
File "run_tests.py", line 732, in parse_results
results_per_suite.print_results()
File "run_tests.py", line 683, in print_results
result.get_testcase_names(failed_test_id)
TypeError: 'NoneType' object is not iterable
Type: test
Change-Id: I2c5ae0b9e11be6bfb4490d9ce057db0b0a84c9bf
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
from threading.thread __init__:
This constructor should always be called with keyword arguments.
If a subclass overrides the constructor, it must make sure to invoke
the base class constructor (Thread.__init__()) before doing anything
else to the thread.
Type: test
Change-Id: Ifa89202e97053a4baf19e9a0ca0913430d5087a3
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
TAP tests require root access, which breaks
the testing in unprivileged scenario.
Disable the test until we find consensus on how
to deal with it.
Type: test
Change-Id: I66ee2b130723233682d858cad0b6e424ab0b2383
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: fix
Change-Id: I63d4df68eed6589763b5ce62bcd7f3fd867c60e1
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
1 - big packets; chained buffers and those without enoguh space to add
ESP header
2 - IPv6 extension headers in packets that are encrypted/decrypted
3 - Interface protection with SAs that have null algorithms
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ie330861fb06a9b248d9dcd5c730e21326ac8e973
|
|
Absolutely nothing good happens when we force the kernel to briefly
map and then unmap 16gb as vpp starts. Effect exacerbated when
TEST_JOBS = 20...40, and so forth.
Type: test
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Id8e3ce1763cad3a0891d5d6c8d2c1e3e610682d7
|
|
test_bfd.BFD4TestCase.test_poll_response providing
inconsistent results is the per-patch tests.
Type: test
Change-Id: I8f1864511526fd330a7da1abfa19be3f565c683a
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
Change-Id: I05d74da311d6a86ec4eb3df50d53ecaa9c622f50
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: test
Change-Id: I2cccc68b1b4b6c576580ae0eb5d4511ca2f4663d
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: test
Change-Id: Id1bffbfe698113d85c4c6bf432ddf4908ed2b788
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
The pcap trace filter initial table index lives in
cm->filter_set_by_sw_if_index [0], which corresponds to the "local0"
interface. Debug cli makes sure that folks don't accidentally specify
the "local0" interface. At least it does now...
Fix the "vlib format.c code coverage" test in test/test_vlib.py.
Type: fix
Change-Id: I35320bc2c8f0c6f1f8c12e3529d1938548185151
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
log.txt message:
17:52:59,969 API call failed, expected 0 return value instead of -13 in tap_create_v2_reply(_0=58, context=77019, retval=-13, sw_if_index=4294967295)
Test was failing with log message:
tap: tap0: tap_create_if: ioctl(TUNSETIFF): Operation not permitted
Type: test
Change-Id: I5bcd9d2b0c870ea5eef92b79314b97821399722f
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
Change-Id: I5cb9a3845ddbc5f4de4eb4e9c481f606fe5cec9a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
enable the tests to run out of order/enable running an individual test.
Before:
[gw1] [ 20%] FAILED test/test_l2bd_multi_instance.py::TestL2bdMultiInst::test_l2bd_inst_02
[gw0] [ 40%] PASSED test/test_l2bd_multi_instance.py::TestL2bdMultiInst::test_l2bd_inst_01
[gw1] [ 60%] PASSED test/test_l2bd_multi_instance.py::TestL2bdMultiInst::test_l2bd_inst_04
[gw0] [ 80%] FAILED test/test_l2bd_multi_instance.py::TestL2bdMultiInst::test_l2bd_inst_03
[gw1] [100%] SKIPPED test/test_l2bd_multi_instance.py::TestL2bdMultiInst::test_l2bd_inst_05
-------
After:
[gw1] [ 20%] PASSED test/test_l2bd_multi_instance.py::TestL2bdMultiInst::test_l2bd_inst_02
[gw0] [ 40%] PASSED test/test_l2bd_multi_instance.py::TestL2bdMultiInst::test_l2bd_inst_01
[gw1] [ 60%] PASSED test/test_l2bd_multi_instance.py::TestL2bdMultiInst::test_l2bd_inst_04
[gw0] [ 80%] PASSED test/test_l2bd_multi_instance.py::TestL2bdMultiInst::test_l2bd_inst_03
[gw1] [100%] PASSED test/test_l2bd_multi_instance.py::TestL2bdMultiInst::test_l2bd_inst_05
Type: test
Change-Id: Ie40eb310f5fccacf854c364aa017891bce9b9372
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: test
Change-Id: I4c54121b76b341381a819cee928c3c2455a83503
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
remove wait-loop on stats socket from test framework.
Type: refactor
Change-Id: I5bb95a7c597707a87f9d9a471215c4b4af1a2280
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
Change-Id: I170edd62220a63cb19efea3032e173fb87730b1b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: I694e44f449863b3edbbc8b6095e94f770dc20330
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: test
Fixes: 5d4b8912d2fe186b4fb920a72b3a2f7b556f4e7d
Change-Id: Ib64ae00eba41b2b6afc728142cbccc02d07f4997
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
in transport mode the header sequence is:
MAC - IP (tun) - ESP - GRE - L2
so popping the GRE header is done in the ESP decrypt node.
Change-Id: Ia125eb65b9300368617d2bffca09683851e43be0
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: test
Fixes: 8d27fa73f22803d518993090804724f76350cfcc
Change-Id: I4656a9769011ed2399c1799f6f17520e44f375c7
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: test
Change-Id: I392975c00d7dae86dacedf7559aafa431e71cb14
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: test
Change-Id: I7d0496c37e06d3b6eee325a262e5398860282b63
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
- ip-neighbour: generic neighbour handling; APIs, DBs, event handling,
aging
- arp: ARP protocol implementation
- ip6-nd; IPv6 neighbor discovery implementation; separate ND,
MLD, RA
- ip6-link; manage link-local addresses
- l2-arp-term; events separated from IP neighbours, since they are not
the same.
vnet retains just enough education to perform ND/ARP packet
construction.
arp and ip6-nd to be moved to plugins soon.
Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Iaae7a9e120bbf8168c581b06d3ac0e124b32e0e7
|
|
Type: fix
Change-Id: I7e041b666dabd90df23a920a1f1d99db4c10ddfe
Signed-off-by: snaramre <snaramre@cisco.com>
|
|
Use consistent API types.
Type: fix
Change-Id: I2dec594cb834a45004edc9ca58ad7c7b4bd7ff06
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Use consistent API types.
Type: fix
Change-Id: I11cc7f6347b7a60e5fd41e54f0c7994e2d81199f
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Add tests.
Remove unused rule-based parser code.
Type: test
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I3ca3a9dd9da8ee8f3a47004c98f2f5644db10057
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I16fcbd5e63526dbf062a3032701479324fe2a4f5
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Ifd1e1907740e55420dc040eb2afbbbf9887aea3c
|
|
This test should be fixed or removed.
EXTENDED_TESTS should not become "BROKEN_TESTS"
Type: test
Change-Id: Id998f0d3b7bd31100f917d076fbd7ddb46d99ed2
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Configure n-tuple classifier filters which apply to the vpp packet
tracer.
Update the documentation to reflect the new feature.
Add a test vector.
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Iefa911716c670fc12e4825b937b62044433fec36
|
|
This change fixes the error message, which would previously report
mismatch on IPv6 layer instead of TCP layer.
Type: fix
Change-Id: Ie78779685362a420d155f928b3cdb341bc3fb8bc
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: feature
Change-Id: Ic6d44122d3e62e09402e3f1946f7e57e9b5e7c5f
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: test
This reverts commit 087c811b63aa6b0575149749e188bb37e7fb0513.
Change-Id: Ica12597f27d5a75c33c12c2d27a227dc4866adcb
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: feature
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Id7b30b5fe63e68ae88f3a42aa77d2614ccda724d
|