summaryrefslogtreecommitdiffstats
path: root/test
AgeCommit message (Collapse)AuthorFilesLines
2024-05-02gso: use the header offsets from buffer metadataMohsin Kazmi1-2/+2
Type: improvement Change-Id: I955fbef0e0238cb69307e96cd1c677061737e5f3 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2024-05-01tests: remove duplicate SVR test caseKlement Sekera1-10/+0
Type: fix Change-Id: I4105109c1c659190fc2da4ee1802ef53449a3c15 Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
2024-04-23tests: allow ip table nameMaxime Peim1-2/+4
Type: refactor Change-Id: I4abbc77a447358f4beaa05505299cae732a3f374 Signed-off-by: Maxime Peim <mpeim@cisco.com>
2024-04-09tests: allow to add paths to default routeMaxime Peim1-2/+12
After adding a path to the default route, the prefix still be there in the table as it is a mandatory prefix. However, the registry hence fail to remove the route from VPP. Type: fix Change-Id: Ic4ad72455ac7a1a2f1d8baba59a7a3afe1610726 Signed-off-by: Maxime Peim <mpeim@cisco.com>
2024-04-09tests: Added a simple prom(etheus exporter) plugin testadrianvillin1-0/+58
Type: test Change-Id: Ibceabc411f09d80cc23be6f2e7c8abd56d4c4ac2 Signed-off-by: adrianvillin <avillin@cisco.com>
2024-04-09mpls: fix default mpls lb hash configVladislav Grishenko1-6/+101
In case of multiple path within tunnel, mpls lookup node computes lb hash with mpls_compute_flow_hash config value 0, so only mpls label and l4 ports gets accounted, not 5-tuple. This leads to flow traffic polarization and disbalance over mpls paths. Use mpls hash config from lb instead, usually it'll be MPLS_FLOw_HASH_DEFAULT with 5-tuple plus flowlabel. As optimization, fix flow hash reuse from the previous lookup node if present, like ip_lookup does. Previously mpls lookup always calcs the hash. Test lb distribution for both cases. Also, use the same flow hash hex format in ip4/ip6 and mpls traces for easier reading, most code changes is due fixstyle formatting. Type: fix Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru> Change-Id: Ib89e1ab3edec14269866fe825a3e887d6c817b7c
2024-04-09vnet: fix ARP for unnumberedPim van Pelt1-6/+16
On unnumbered interfaces, ARP fails because there is no attached route. Allow replies to peer-to-peer addresses on unnumbered interfaces: eg. 192.0.2.1/32 <-> 192.0.2.2/32 Type: fix Change-Id: Ibeb8d8ebc8d58d5bfb0724739a17694e0217356e Signed-off-by: Pim van Pelt <pim@ipng.nl>
2024-04-03tests: upgrade python packagesDave Wallace8-477/+521
Type: test Change-Id: I01500466f3d15c79e38028677ce7e5c75d427fdc Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2024-04-02tests: figure out correct version of sed to runMatthew Smith1-1/+3
In run_in_venv_with_cleanup.sh, sed was changed to gsed to allow the script to run properly on FreeBSD because the sed script uses an expression that is specific to the gnu sed. Gnu sed is available to be invoked as gsed on FreeBSD systems, but there is no executable or symlink which allows sed to be run by the name gsed on ubuntu 22.04. Check for the existence of gsed. If it's found, use it. Otherwise, just use sed. Type: fix Fixes: b3c863eae4 Signed-off-by: Matthew Smith <mgsmith@netgate.com> Change-Id: I487197e486f500711aa3e87ec7ba899a53606b40
2024-04-02tests: Use gnu sed explicitly in test setup/tear downTom Jones1-1/+1
Type: improvement Change-Id: Ie79fd8a5bcfd72a97bf460ef6437913ac34f439c Signed-off-by: Tom Jones <thj@freebsd.org>
2024-04-02tests: Add missing socket imports in testsTom Jones3-0/+4
Type: fix Change-Id: I646f96517d3bda5c0f5644e6bb89ade7818fc466 Signed-off-by: Tom Jones <thj@freebsd.org>
2024-04-02l2: fix vxlan src port entropy with mpls payloadVladislav Grishenko2-3/+80
l2 tunnels like vxlan, gtpu, geneva use vnet_l2_compute_flow_hash() to compute flow hash for udp src port entropy. In case of inner mpls tunnels to the same lsr ethernet src and dst macs are the same, so l2 flow hash is also the same leading to no src port entropy and the only rss queue overflow on receiver side. Fix it for all the possible vnet_l2_compute_flow_hash callers by making mpls playload hash in additon to ip4/ip6. Visible performance impact is not expected as it's only one check for mpls ethertype for common cases. Type: fix Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru> Change-Id: I69153d42fb3d7c094a670c674fac8d14039c626a
2024-03-29vlib: improve automatic core pinninghsandid1-0/+328
Type: feature Auto core pinning now fetches vpp cpu affinity list using pthread api. This enables us to do core-pinning in environments where the host cpu list does not necessarily align with cpus available to vpp Change-Id: Ife8c2a2351c08c5c6c4fdf7c729eeff2697bc39a Signed-off-by: hsandid <halsandi@cisco.com>
2024-03-26tests: Add support for getting corefile patterns on FreeBSDTom Jones2-2/+9
Type: improvement Change-Id: I960edc05a9a77eb55f67cb1ec01d2b3122298ef8 Signed-off-by: Tom Jones <thj@freebsd.org>
2024-03-26tests: Add platform handling for FreeBSDTom Jones1-1/+6
FreeBSD doesn't have an easy mechanism to discover CPU features currently. For tests declare we don't support anything we are asked about. Add the FreeBSD spelling of amd64 while we are here. Type: improvement Change-Id: I3eb5db856ee5cbc71250e47eee619e2f620de33a Signed-off-by: Tom Jones <thj@freebsd.org>
2024-03-26tests: Add missing struct importTom Jones1-0/+1
Type: fix Change-Id: I957877d7a82dea437c072e493561894f11321aaf Signed-off-by: Tom Jones <thj@freebsd.org>
2024-03-26tests: Use errno value rather than a specific intTom Jones1-1/+2
For portability we use errno defines rather than explicit int values when checking for errors. Type: improvement Change-Id: Ib5fc1db357da150d008d5a11bef5dbc7ec354cfb Signed-off-by: Tom Jones <thj@freebsd.org>
2024-03-21ip: add support for buffer offload metadata in ip midchainArthur de Kerhor1-0/+201
The offload should be handled by gso node or by the NIC if the latter has the relevant capabilities. But ip midchain is missing the support for buffer offload metadata in case of GSO packet. This patch adds the relevant support to add the buffer metadata if the packet is GSO/IPIP to be handled accordingly. Type: improvement Change-Id: I17f5d71bf4c5f43a85ca3f2fbebfa1426b42ef69 Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com> Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2024-03-18vapi: uds transport supportStanislav Zaikin1-9/+20
introduce ability to connect over unix socket instead of shared memory Type: improvement Change-Id: Id9042c74e33ad4e418896c4d7ae48bb9106195c9 Signed-off-by: Stanislav Zaikin <stanislav.zaikin@46labs.com> Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
2024-03-12tests: use proper unit test skip instead of printsKlement Sekera1-3/+1
Using unittest skip instead of print unclutters display by not printing skip messages when not applicable, e.g. when somebody runs tests which are unrelated to netns tests, e.g. with FILTER=vapi. Type: fix Fixes: e416893a59 Change-Id: Ie09e213249aa47da7e4ff484c3d072fbce3c2001 Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
2024-03-07flowprobe: fix flush callbacks when multiple workersAlexander Chernavin1-2/+0
IPFIX buffers are stored on a per worker thread basis. Currently, the flush callbacks will flush only buffers stored for the main thread. And buffers for worker threads will not be sent until their size reach the path MTU configured for the exporter. So if traffic is constant, the problem will unlikely to be visible. Buffers will be sent once they reach the maximum size. However, if traffic stops at some point and flush is triggered in order to make the plugin send all currently buffered data, this will not happen. And collectors will not receive that data. The plugin will keep the remaining data until traffic starts again, the buffers reach the maximum size, and be sent. With this fix, flush buffers for worker threads and for the main thread when the flush callbacks are triggered. This will allow to remove @tag_fixme_vpp_workers from the unit tests that don't set timers. The tests that set timers will still be failing for other multi-worker related problems. Type: fix Change-Id: I9a7d9cef8ddbec7ee68c79309e48e7bc0953d488 Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
2024-03-04misc: fix icmpMaxime Peim2-3/+3
- fix ICMPv6 lookup FIB (don't reset sw_if_index[VLIB_TX] to -1) - add locally generated flag in ICMPv4 buffers (reflect ICMPv6) Type: fix Change-Id: If25a176a9952cbe185a030f8b136718af1bff9e8 Signed-off-by: Maxime Peim <mpeim@cisco.com>
2024-03-04bpf_trace_filter: support bpf filter optimization and dumpVladislav Grishenko1-1/+32
BPF filter w/o optimization can take x2 - x3 more instructions, causing significant slow down in fast path. Enable pcap optimization by default via cli and introduce api v2 with pcap optimization control, keep v1 for a while as it exists in previous release already. Intriduce bpf filter cli dump, similar to tcpdump -d. Also fix memleak, function name typo, cli pcap format hint and add related tests. Type: improvement Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru> Change-Id: I92b2b519e92326f1b8e1a4dda6a3e3edc52f87ad
2024-03-04fib: fix crash while adding intf-rx routesVladislav Grishenko2-0/+266
Fix crash while adding intf-rx ip4 and ip6 routes via api due invalid exporting of interface rx routes as attached. Also, add missed route path via rx-ip6 cli support. Type: fix Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru> Change-Id: I15711c8c0787398dd7e3baa4787019bb1f317666
2024-02-19ipsec: check each packet for no algs in esp-encryptMatthew Smith1-1/+23
In esp_encrypt_inline(), if two or more consecutive packets are associated with the same SA which has no crypto or integrity algorithms set, only the first one gets dropped. Subsequent packets either get sent (synchronous crypto) or cause a segv (asynchronous crypto). The current SA's index and pool entry are cached before it can be determined whether the packet should be dropped due to no algorithms being set. The check for no algorithms is only performed when the cached SA index is different than the SA index for the current packet. So packets after the first one associated with the "none" alg SA aren't handled properly. This was broken by my previous commit ("ipsec: keep esp encrypt pointer and index synced") which fixed a segv that occurred under a different set of circumstances. Check whether each packet should be dropped instead of only checking when a new SA is encountered. Update unit tests: - Add a test for no algs on tunnel interface which enables asynchronous crypto. - Send more than one packet in the tests for no algs. Type: fix Fixes: dac9e566cd16fc375fff14280b37cb5135584fc6 Signed-off-by: Matthew Smith <mgsmith@netgate.com> Change-Id: I69e951f22044051eb8557da187cb58f5535b54bf
2024-02-14tests: refactor virtual interface testsNaveen Joy17-98/+718
Split virtual interface tests in VPP into smaller and modular tests for testing various interface types and features. Type: test Change-Id: Ic38af88379f75eee3090679d411edbdc8fd5d2e5 Signed-off-by: Naveen Joy <najoy@cisco.com>
2024-02-14ikev2: dump state and profile name in CLI and APIDenys Haryachyy1-0/+89
Type: improvement Change-Id: Ide4b45da99e3a67376281f6438997f3148be08e5 Signed-off-by: Denys Haryachyy <garyachy@gmail.com>
2024-02-09ikev2: accept rekey request for IKE SAAtzm Watanabe1-24/+152
RFC 7296 describes the way to rekey IKE SAs: to rekey an IKE SA, establish a new equivalent IKE SA with the peer to whom the old IKE SA is shared using a CREATE_CHILD_SA within the existing IKE SA. An IKE SA so created inherits all of the original IKE SA's Child SAs, and the new IKE SA is used for all control messages needed to maintain those Child SAs. Type: improvement Signed-off-by: Atzm Watanabe <atzmism@gmail.com> Change-Id: Icdf43b67c38bf183913a28a08a85236ba16343af
2024-01-29ip: don't export useless error counters for ip6 rewriteArthur de Kerhor1-0/+4
the error node is set to ip6_input in the inline funcition associated with ip6_rewrite. Thus, error counters defined for node ip6 rewrite are never used. Type: fix Change-Id: Id6bef633928b0fff9069498c2e39e9f5bea2cf9b Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
2024-01-21build: Explicitly use gmakeTom Jones1-2/+2
VPP requires GNU Make to build, on GNU systems (such as Debian), GNU Make is installed as 'make', typically with a symlink from 'gmake'. On other systems (such as FreeBSD), 'make' is a BSD Make derriviative and GNU Make is installed a 'gmake'. Use $(MAKE) variable for make calls from within Makefiles. This variable is set to the path of the calling make program, i.e., /usr/local/bin/gmake on a bsd system. This is the recommended way to call make from Makefiles in the GNU Make documentation. Type: improvement Change-Id: Id9162a34a0f8358f22090718087918dae31c0fce Signed-off-by: Tom Jones <thj@freebsd.org>
2024-01-19build: Explicitly use bash for shell scriptsTom Jones6-6/+6
VPP requires bash for all shell scripts. Align shebang lines in build and test scripts to look up the location of bash rather than hard coding '/bin/bash'. Look up the location of bash for makefiles. Type: improvement Change-Id: I23b705d81d60389fa8af61c680cf0abd74f0ea24 Signed-off-by: Tom Jones <thj@freebsd.org>
2024-01-18tests: preload api filesMaxime Peim4-5/+13
When sanity test is not done, API files are not loaded until the first test case is run. Hence, it is not possible to use enums, etc. outside of a test class. By preloading API files before running any tests, it prevents its issue. Type: fix Change-Id: I8730150374e6c5f8d6933ec037811372ac2a8da0 Signed-off-by: Maxime Peim <mpeim@cisco.com>
2024-01-10urpf: add interface dump to APIPim van Pelt1-0/+55
Add an urpf_interface_dump() API call, with optional sw_if_index. If either a mode or a table is specified in any given interface address family and direction, return it in a list, otherwise omit it. TESTED: create loopback interface instance 0 create loopback interface instance 1 create loopback interface instance 2 create loopback interface instance 3 ip6 table add 8298 set urpf ip4 rx loose loop1 set urpf ip6 tx off loop2 table 8298 API call urpf_interface_dump(sw_if_index=~1) returns: [ urpf_interface_details(_0=658, context=2, sw_if_index=2, is_rx=True, mode=<vl_api_urpf_mode_t.URPF_API_MODE_LOOSE: 1>, af=<vl_api_address_family_t.ADDRESS_IP4: 0>, table_id=0), urpf_interface_details(_0=658, context=2, sw_if_index=3, is_rx=False, mode=<vl_api_urpf_mode_t.URPF_API_MODE_OFF: 0>, af=<vl_api_address_family_t.ADDRESS_IP6: 1>, table_id=8298) ] Type: improvement Change-Id: I1ded5c445dc07dab73ea41b817b5827b72ca79d4 Signed-off-by: pim@ipng.nl
2023-12-22tests: Temporarily skip an unstable testadrianvillin1-1/+4
Type: test Change-Id: Idd608511ed350a8e13afff393e558e20d52627a0 Signed-off-by: adrianvillin <avillin@cisco.com>
2023-12-21tests: memif interface tests using libmemifNaveen Joy5-139/+305
Type: test Change-Id: I711dfe65ad542a45acd484f0b4e3e6ade9576f66 Signed-off-by: Naveen Joy <najoy@cisco.com>
2023-12-20srv6-mobile: Implement SRv6 mobile API funcsTakeru Hayasaka2-16/+206
This merge request adds the feature to manipulate localsids and policies for SRv6 mobile via API. Type: feature Signed-off-by: Takeru Hayasaka <hayatake396@gmail.com> Change-Id: Ibb46bf71ae1d9d4591ce2c8ccf66f520887dad70
2023-12-15tests: Added bpf trace filter plugin testadrianvillin2-2/+107
Type: test Change-Id: I026d9298fe1372d03f61b6ad57c82628bab4c831 Signed-off-by: adrianvillin <avillin@cisco.com>
2023-12-12ipsec: allow receiving encrypted IP packets with TFC paddingArthur de Kerhor1-3/+73
Type: feature Change-Id: I7b29c71d3d053af9a53931aa333484bf43a424ca Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com> Signed-off-by: Benoît Ganne <bganne@cisco.com>
2023-12-07tests: tracedump test replace hardcoded valuehsandid1-8/+20
Type: fix Fetch 'pg-input' node index instead of using a hardcoded value Change-Id: I1ca27ddb54806530b546085d83e83b880acc4573 Signed-off-by: hsandid <halsandi@cisco.com>
2023-12-01tests: Added tracedump plugin testsadrianvillin1-0/+101
Type: test Change-Id: Ie054924eb5e5b2b146db8d2b63511c8b0400f045 Signed-off-by: adrianvillin <avillin@cisco.com>
2023-11-28tests: fix default node variant in testsDmitry Valter1-1/+1
Pass a correct form of node variant config in tests Type: fix Signed-off-by: d-valter@yandex-team.ru Change-Id: I8cdc240b18a1664e57a5814d6cd644891c99f515 Fixes: 8800f732f868bf54da8adba05e38bd2477895ca5
2023-11-28tests: Added NSIM plugin testsadrianvillin1-0/+267
Type: test Change-Id: Id621a806b853688ced7c6a38e1a9e5f298d2b97e Signed-off-by: adrianvillin <avillin@cisco.com>
2023-11-28tests: refactor pcap file deletion to improve robustnessDave Wallace2-16/+23
Type: test Change-Id: I504c079126bd8b33c5e217a1b9086788a8c778e5 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2023-11-27tests: Excluded some components from LCOVadrianvillin1-0/+3
Type: test Change-Id: I387611cfc361e664eb1e78ae669ba4e3901c4fe6 Signed-off-by: adrianvillin <avillin@cisco.com>
2023-11-14tests: retry unlinking pcap files on os errorDave Wallace1-2/+11
Type: test Change-Id: I270798ed68f04bd3974dd39c44e85dad5fa02de0 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2023-11-12flowprobe: fix tx flows generated for rewritten trafficAlexander Chernavin1-0/+75
Currently, when IPFIX records generation is enabled for an interface in the TX direction, some rewritten traffic is being sent from that interface, and the Ethernet header's location has changed due to rewriting, generated TX flows will contain fields with wrong and zero values. For example, that can be observed when traffic is rewritten from a subinterface to a hardware interface (i.e. when tags are removed). A TX flow generated in this case will have wrong L2 fields because of an incorrectly located Ethernet header. And zero L3/L4 fields because the Ethernet type will match neither IP4 nor IP6. The same code is executed to generate flows for both input and output features. And the same mechanism is applied to identify the Ethernet header in the buffer's data. However, such general code usually works with the buffer's data conditionally based on the direction. For most input features, the buffer's current_data will likely point to the IP header. For most output features, the buffer's current_data will likely point to the Ethernet header. With this fix: - Keep relying on ethernet_buffer_get_header() to locate the Ethernet header for input features. And start using vlib_buffer_get_current() to locate the Ethernet header for output features. The function will account for the Ethernet header's position change in the buffer's data if there is rewriting. - After fixing Ethernet header determination in the buffer's data, L3/L4 fields will contain non-zero but still incorrect data. That is because IP header determination needs to be fixed too. It currently relies on the fact that the Ethernet header is always located at the beginning of the buffer's data and that l2_hdr_sz can be used as an IP header offset. However, this may not be the case after rewriting. So start calculating the actual offset of the IP header in the buffer's data. - Add a unit test to cover the case. Type: fix Change-Id: Icf3f9e6518912d06dff0d5aa48e103b3dc94edb7 Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
2023-11-10tests: perfmon - Added a check if test is running with root privilegesadrianvillin1-0/+6
Type: test Change-Id: I1910f3ef79e9018aee032daca0f1932eccb7b9f9 Signed-off-by: adrianvillin <avillin@cisco.com>
2023-11-08tests: Fix http static test failing on retryadrianvillin2-5/+21
- test_http_static.py: If namespace creation fails, try to delete the namespace and create it again - vpp_qemu_utils.py: Added "isinstance()" to "delete_namespace()" to match "create_namespace()" Type: test Change-Id: I88ff7a36f5d52816fee16283efba6af025496491 Signed-off-by: adrianvillin <avillin@cisco.com>
2023-11-08tests: added a simple perfmon plugin testadrianvillin1-0/+42
Type: test Change-Id: Ief0c0e13a2c19a03b48219d9a0d85256fb0c9dbe Signed-off-by: adrianvillin <avillin@cisco.com>
2023-11-08tests: added simple CT6 plugin testsadrianvillin1-0/+72
Type: test Change-Id: I77f119ac982170627484d792dc456753c9847af8 Signed-off-by: adrianvillin <avillin@cisco.com>