Age | Commit message (Collapse) | Author | Files | Lines |
|
Move interface and packet setup for the ip6 punt test to its own
class so that child classes can be created that use it.
Type: test
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: I14acedc1bcd12cb320835a36833cd32303c5f793
|
|
Add a test for ip4 punt policer thread handoff. A child class is
created that uses common punt test setup but is configured to have 2
worker threads.
Type: test
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: I34defee85bc5636f9355d0b9aaa007bfaf5e001e
|
|
Move interface and packet setup for the ip4 punt test to its own
class so that child classes can be created that use it.
Type: test
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: I1a976e8fc0e8a44a86fe923a3ae093fe0c9057a8
|
|
Type: feature
A device/router needs to have a unique ID which is included in the flow
has so that flows are not polarised through the network, i.e. each deice
in the network chooses the same nth link for the same flow.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I963e03674adbb085902b4084fdc4886b88f5734c
|
|
We have accumulated several scenarios in prod or wishlists
where it would be useful to have a general infra to say yes/no
about a certain test, and potentially make decisions based on that,
for example:
- runs solo (aka 'time-dependent')
- (wishlist) part of quick smoke-test set
- (wishlist) intermittent failure unrelated to timing
- (wishlist) test broken with a multi-worker config in vpp
Refactor the current "run-solo" code to allow for this extension.
Type: test
Change-Id: Ia5b3810e57c0543753c8e0dc4dc0cfb4a30b36ac
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
extends ip6_compute_flow_hash() to include IPv6 flowlabel in flowhash computation
Type: improvement
Signed-off-by: Ahmed Abdelsalam <ahabdels@cisco.com>
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: Id1aaa20c9dac729c22b714eea1cdd6e9e4d1f75e
|
|
remaining tests are solo-run
There was a logic error, which results in not running solo tests
if TEST_JOBS=1, and we have finished running the regular test
and the remaining tests are all solo-run. They all get put into
that pile, but the new runners never start.
Solution: check the pile of solo-run jobs unconditionally.
Thanks to Klement Sekera for spotting the issue.
Type: fix
Change-Id: Iaecacbe4de44050cd8d0ff2d524559df99f2bae4
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: improvement
Change-Id: I9f60e29462c7cb193a8594b7de06418b40573103
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Change-Id: I5739869490155b0b9674b4faf61882d97e66a4ed
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I89dc3815eabfee135cd5b3c910dea5e2e2ef1333
|
|
Type: fix
If a tunnel's source is not local then post encap VPP will attempt to
receive (via ip4-local) that packet, things go wrong from there.
The fix is when stacking the encap forwarding don't accept a receive
DPO. This approach is taken, rather than rejecting bad tunnels, because
the 'local-ness' of the tunnel's source can change and we can't reject
tunnels that were once correctly configured but are no longer.
the user will quickly discover their mistake as traffic won't pass.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I46198422e321606e8baba003112e978a526b4c2f
|
|
Type: fix
Signed-off-by: Jerome Tollet <jtollet@cisco.com>
Change-Id: I7cbbea2205ca7249ba19020b25c8657b42e09562
|
|
want_l2_macs_events
Type: feature
Signed-off-by: Jerome Tollet <jtollet@cisco.com>
Change-Id: I6de6dae7da4ec1001e2811975a9b67acfc1a148c
|
|
- Refactor make test code to be co-located with
the vpp feature source code.
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I056717261553f6449f5fcd3611b6ae3895a00ba6
|
|
Type: fix
Signed-off-by: Jerome Tollet <jtollet@cisco.com>
Change-Id: I86bc9a461660f3f71e06f88ab65004ec3d763b88
|
|
Type: fix
with hard links this sequence doesn't work
echo "GARBAGE" >> test/vpp_ipsec.py
git checkout test/vpp_ipsec.py
also blow away the staging diretory with 'test-wipe' just to be thorough
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ic38d7ec514102759f2eafead59c7f56c5b39f33d
|
|
VPP only supports a poor man's approach for interrupt notification to the
driver. It uses a simple binary flag for "interrupt needed" or "interrupt
not needed". Most drivers support more sophisticated event index already.
This feature is to add the long due missing feature and make it configurable,
off by default.
Type: feature
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I68dab7dd07045cafb49af97b7f70db9b8131ae03
|
|
Type: feature
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ief1755131297afcaa14fe74fd8dd28c71a92fbe6
|
|
Type: fix
it's been 2 releases since it was marked deprecated.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I0eba7ed607826ed0d00e7d2d8f9b27d09e8e9a6e
|
|
Type: feature
Signed-off-by: Jerome Tollet <jtollet@cisco.com>
Change-Id: I57ed6699050445d9c9aec98eff3aab56735aca54
Signed-off-by: Jerome Tollet <jtollet@cisco.com>
|
|
- Refactor make test code to be co-located with
the vpp feature source code
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I17003925be06d1051f18f1c24ff081790a610c23
|
|
- Refactor make test code to be co-located with
the vpp feature source code.
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I3ef69bc915d2217357a9e2b1afa1cfd6c363faa0
|
|
- Use hard links instead of soft links so
that python module import works correctly
for relocated test/vpp_*.py modules.
Type: fix
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: If9c031bf0918344dedd4dee5f9336e869590b0ae
|
|
Type: refactor
Change-Id: I1303219f9f2a25d821737665903b0264edd3de32
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- Refactor make test code to be co-located with
the vpp feature source code
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I0529eb51b5a6bc2a5f1a49ee9d3320908ad1dba9
|
|
Add safeguards when tracing packets to avoid cases where clear trace
was issue while buffers were held in reassembly.
Type: fix
Change-Id: I1bdd1e629e8bc08ce63913fd3c4b2327e47dec04
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Add a couple of tests to check l2bd learn limit behaviour
Type: test
Signed-off-by: Jerome Tollet <jtollet@cisco.com>
Change-Id: Iee16c81e5bb41066e3d6446d0e6ea4f389241270
|
|
Add assertions to verify correct ethernet type field in ARP test case.
Type: test
Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net>
Change-Id: I1d2671b0ab2b4dcb53dab4b54bf93578d6bc86a3
|
|
The Centos-7 compiler had problems with vapi_cpp_test.cpp.
The Centos-8 compiler does not. This change adds back the test.
==============================================================================
VAPI test
==============================================================================
run C VAPI tests 1.55 OK
run C++ VAPI tests 0.44 OK
==============================================================================
TEST RESULTS:
Scheduled tests: 2
Executed tests: 2
Passed tests: 2
==============================================================================
Type: test
Change-Id: Ic6a655ae99eb3ba0e73b7feef4436a0ca5fd92be
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: feature
Use the FIB to provide SAS (in so far as it is today)
- Use the glean adjacency as the record of the connected prefixes
= there's a glean per-{interface, protocol, connected-prefix}
- Keep the glean up to date with whatever the recieve host prefix is
(since it can change)
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: I0f3dd1edb1f3fc965af1c7c586709028eb9cdeac
|
|
Type: refactor
Change-Id: I9096e3b473110350e1e8e5936e3c4c164f8969a7
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: test
Change-Id: I39afe56a085648d881a18c7eafcf7caf2f375f31
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Move ForeignAddressFactory back to test_lisp.
It is the only test that uses the code and has
embedded addresses specific to the test.
Type: test
Change-Id: If1a39f9b167e36dd7aff7481350ddb8fe17155d2
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: test
Change-Id: Idb6b8169845e0239e639429ccfd02a683212b7e6
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Fix a typo in numbered list in the documentation. Also mention
possibility of using TEST= to run a specific test.
Type: fix
Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net>
Change-Id: I026703af014493afb3dea2d9ad99a7bb510b135d
|
|
the aenum library was used to provide intflag functionality
for python versions earlier than 3.6
Type: test
Change-Id: I914d390ee5364f337006c1c59abafe4b9a3c1bde
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
make it easier to detect logical mistakes.
Type: test
Change-Id: I853748ffaeebc545c8d31299f0d105405ad80bba
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: refactor
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I1bf53c2554e6b313467f618717698ed158db9065
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
- Unversioned python shebang lines may cause
mixed python 2.7 and python 3 execution in
make test.
Type: fix
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: Ia82c37be33902718c48878378b8343eedb76c2c8
|
|
Type: test
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I6fc907ba923581540380bc9b456b5183fc100775
|
|
Change "elog trace" to "event-logger trace"; corresponding change in
test/test_vlib.py, verified that the vlib test vectors still pass even
though they're not run on a regular basis ("make GCOV_TESTS=yes
TEST=test_vlib ...")
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Idee4aa036573865e071a9bab87e27fb5d53b4933
|
|
Type: fix
also cleanup any tracking at delete
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Id1037920c88c63e2029384af931064c00ed497aa
|
|
Type: fix
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I1922463683201215933e9f85b587d7c7123f3bfd
|
|
Type: fix
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: I9952497a108bac26445af95c28d4eed46099c2fc
|
|
Type: refactor
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I5052fc1fd82b5d17c1ed66fee5185addf60b9eb6
|
|
Type: refactor
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I916a386af48fd558b4749e206b2bc4b82a888512
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: test
must have been disabled when another test of the same name was added
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I108582a68cc3ac81c03ab641f562ff22947baf30
|
|
Type: improvement
Change-Id: Ica5f395075677bda5f38d28e704f65350af88610
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- Refactor make test code to be co-located with
the vpp feature source code
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I089bda44c31cbb217132e5b385cd9ea96ea5239e
|
|
- Refactor make test code to be co-located with
the vpp feature source code.
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: Ibae85a18df0d5a53e2a59c678a2a27499f54ce6d
|