aboutsummaryrefslogtreecommitdiffstats
path: root/vlib
AgeCommit message (Collapse)AuthorFilesLines
2016-06-05Add per-device startup config supportDamjan Marion2-1/+3
This change adds support for providing per-interface parameters in the startup config. Sample configuration: dpdk { dev default { num-rx-queues 3 num-tx-queues 3 } dev 0000:02:00.0 { num-rx-queues 2 num-tx-queues 2 } dev 0000:02:00.1 } Change-Id: Ia7d9ae2ac9c4fd9baaa480d061a395f8a421a722 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-06-01VPP-83 Allow non-privileged clients to use the vpp binary API.Dave Barach1-3/+6
Use the command line argument "api-segment { uid <nnn> gid <nnn> }" to configure shared memory segment file ownership. Defaults to uid = gid = 0. Shared-memory segments are explicitly set to 0770 mode, aka "rwxrwx---". Change-Id: Ic5d596b68139add61e7de6ace035c57dfd030111 Signed-off-by: Dave Barach <dave@barachs.net>
2016-05-23Native VPP driver for Intel Niantic family of NICsDamjan Marion6-0/+292
Available only in vpp_lite platform Change-Id: I09d112af5f7f4521ec25196ecdd8c02c20eedd5f Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-05-21Add per-thread, per-node runtime stats serializationDave Barach2-0/+4
Change-Id: Ic4009cdbac67b7cd53c88079439496b9d9dfaa35 Signed-off-by: Dave Barach <dave@barachs.net>
2016-05-19VPP-74 Fix signedness issue when terminal resizesChris Luke1-4/+9
When re-locating our current viewport into the pager buffer we need to verify that the new viewport is within the boundaries of the index. This condition is considered very rare, but nontheless the check is needed. Unfortunately I assumed the variable was signed; it is not, and the subtraction can in some cases cause the value to be negative. This is therefore a bonafide semantic error that may cause problems. This patch reworks the logic to avoid having to change it to be signed. Change-Id: I26f0747d38dcc43dd9c092d50f2489b122009e7b Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-05-19Remove unused PCI codeDamjan Marion1-7/+0
Change-Id: I1d91c9982823758059f9d6aa699982253930e7ba Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-05-19Add support for multiple microarchitectures in single binaryDamjan Marion1-0/+27
* compiler -march= parameter is changed from native to corei7 so code is always genereted with instructions which are available on the Nehalem microarchitecture (up to SSE4.2) * compiler -mtune= parameter is added so code is optimized for corei7-avx which equals to Sandy Bridge microarchitecture * set of macros is added which allows run-time detection of available cpu instructions (e.g. clib_cpu_supports_avx()) * set of macros is added which allows us to clone graph node funcitons where cloned function is optmized for different microarchitecture Those macros are using following attributes: __attribute__((flatten)) __attribute__((target("arch=core-avx2))) I.e. If applied to foo_node_fn() macro will generate cloned functions foo_node_fn_avx2() and foo_node_fn_avx512() (future) It will also generate function void * foo_node_fn_multiarch_select() which detects available instruction set and returns pointer to the best matching function clone. Change-Id: I2dce0ac92a5ede95fcb56f47f3d1f3c4c040bac0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-05-18Rework of the old PCI codeDamjan Marion10-335/+473
* adds support for VPP native PCI drivers using standard uio_pci_generic kernel driver * adds generic PCI interrupt callback * splits code to generic PCI handling and linux specific * adds new debug cli 'show pci [all]' Change-Id: I447c2285e319e9725d70688c1b70c9dedda51fdc Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-05-17dpdk/build - 32bits compilationChristophe Fontaine1-1/+1
In vnet/vnet/devices/dpdk/device.c, post 2 event data instead of merging them into 1 u64. Change-Id: I8b1d61b894279fb6eb57bb82a05affc14360e6b8 Signed-off-by: Christophe Fontaine <christophe.fontaine@qosmos.com>
2016-05-16VPP-23 Re-work pager line collationv16.09-rc0Chris Luke1-88/+364
To better handle lines longer than the terminal width, re-work how the pager collates lines. We still store each output line in a vector or lines; additionally we index the start and end of displayable lines. The index then becomes the data to work out what to display. If the terminal is resized this index is rebuilt and the current page redisplayed and an attempt made to keep the current top-of-screen line in place. Change-Id: Icc6f4f72dabad89682cd82be88adb03eadb7811d Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-05-16VPP-57 Add missing license headers in doc filesChris Luke3-0/+48
Change-Id: Icd1f8952f66d3cee027c59f3148c67f1839de306 Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-05-13VPP-57 Add Doxygen to VPPChris Luke4-51/+141
- Configures Doxygen. - Adds a source filter to do magic on our use of the preprocessor to do constructor stuff to make Doxygen grok it better. - Adds a convenience helper to the root Makefile. - Adds a README.md to the root directory (and which Doxygem uses as its "mainpage". - Add several other documentative files. - Currently using SVG for call graphs, though this may have a load-time performance impact in browsers. Change-Id: I25fc6fb5bf634319dcb36a7f0e32031921c125ac Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-05-10VPP-46 Fix cut-and-paste in the debug CLIChris Luke1-38/+46
Since the move to line-mode the debug CLI was eating everything in the input_vector but only processing upto the first newline. Cut-and-paste type operations generally send a large block of input with multiple newlines and thus all but the very first line were simply ignored. This patch fixes that and also cleans up the difference between input_vector and current_command which in turn removes a lot of cruft from the keystroke parser. Previously current_command was just the character accumulator inside the char-by-char keystroke parser; complete commands were copied back to input_vector (overwriting anything already in there). Now, in char-by-char mode: - input_vector is the stream of incoming bytes yet to be processed - current_command is the accumulated characters of the next command to be executed; once newline is found, it is the complete command to be executed. In line mode: - input_vector and current_command are the same thing. Change-Id: I72d21f0f3508b413879071ab186a71cef1124a2b Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-05-10Avoid clobbering output_function by concurrent CLI sessions doing ↵Andrew Yourtchenko4-17/+63
vlib_process_wait_for_event*. A problem is easily reproducible by taking the test harness code from the commit, and launching it in two terminals with some time overlap - the outputs will be sent to the wrong session. This commit moves the output_function and argument from a global structure into the process structure, thus the output_function is not clobbered anymore and each session gets only its own output. To ensure the callers can redirect the outputs to different destinations (e.g. the API calls via shared memory, etc.) the existing logic for vlib_cli_input() was retained. To avoid the magic numbers usage in the logic that does the page-alignment of the process stack, there are changes around the stack[] member of vlib_process_t. Also added a compile-time assert to ensure that the stack does indeed start on the page size multiple boundary. Change-Id: I128680ac480735e5f214f81a884e414268e5d652 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2016-04-29VPP-26 Iterate through empty command line in cli historyChris Luke1-10/+24
When cursoring through the command history in the CLI, when you reach the end of the history (ie, back at "where you started") most CLI's typically show a blank line. This is a visual cue that you are back where you started. Change-Id: I5733dbd0dcdc6deac6a0a856cfadbdb987456ec0 Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-04-29VPP-27 Extend telnet protocol buffer guardChris Luke1-1/+1
With Telnet protocol overhead, the string "xterm-256color", which is the norm when the terminal is iTerm on a Mac, is longer than the 16 byte lookahead overflow guard in the Telnet protocol processor. This extends it to 24 bytes. This guard is designed to encourage the protocol processor to quit waiting for bytes indefinitely if those already in the buffer do not form a complete message. Whilst this is unlikely, extending the guard length would mean more bytes need to be received before it gives up. Change-Id: Ibaa3d35b78bfd298fe0e4f4c6e508440f122e916 Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-04-29Clean up per-thread mheap setup.Dave Barach1-22/+22
The stats thread was sharing the main mheap when we started at least one worker or I/O thread, but ran on its own mheap when we started 0 worker + io threads. Net of this change; if a VLIB_REGISTER_THREAD instance specifies a per-thread mheap, a per-thread mheap will be provided. Otherwise, threads share the main heap. The stats thread now uses the main heap. Simpler is better. Change-Id: I1fff0dd66ae8f7dfe44923f702734e2832b55b09 Signed-off-by: Dave Barach <dbarach@cisco.com>
2016-04-28Track number of ethernet vlans in a frameChris Luke1-2/+1
Adds flags to the packet buffer to track the number of VLANs in the current Ethernet frame. We use two bits to signify 0, 1 or 2 VLANs. The value 3 signififies an unknown quantity of VLANs, which includes "three or more" which is not widely supported. We place the bits in the vlib_buffer section; that is not the opaque section, so that all subordinate nodes can use it. For background, see the discussion thread at https://lists.fd.io/pipermail/vpp-dev/2016-March/000354.html The helper macro ethernet_buffer_header_size(buffer) uses these bits stored in "buffer" to calculate the Ethernet header size. The macro ethernet_buffer_set_vlan_count(buffer, count) sets the appropriate bit values based on the number in "count". By current frame we are referring to the case where a packet that arrives from the wire is carrying an encapsulated Ethernet packet. Once decapsulated that inner packet becomes the current frame. There are two places where this value is set; For most Ethernet frames this will be in the "ethernet-input" node when that node parses the Ethernet header. The second place is whenever vnet_update_l2_len() is used to update the layer 2 opaque data. Typically this function is used by nodes just before they send a packet into l2-input. These bits are zeroed in vlib_buffer_init_for_free_list() meaning that wherever the buffer comes from they have a reasonable value (eg, if ip4/ip6 generates the packet.) Primarily this VLAN counter is used by nodes below "ethernet- input" and "l2-input" to determine where the start of the current Ethernet header is. There is opaque data set by "ethernet-input" storing the offset of the current Ethernet header but, since this is opaque, it's not usable by downstream nodes. Previously several nodes have made assumptions regarding the location of the Ethernet header, including that it is always at the start of the packet buffer (incorrect when we have encapsulated packets) or that it is exactly sizeof(ethernet_header_t) away (incorrect when we have VLAN tags.) One notable case where this functionality is required is in ip6_neighbor when it generates a response to a received neighbor soliciation request; it reuses the incoming Ethernet header in-situ and thus needs to reliably know where that header begins. Also, at the suggestion of Dave Barach, this patch removes definition of HGSHM bits in the buffer flags since they are unused and unlikely to ever be. Change-Id: I00e4b9ced5ef814a776020c395d1774aba6185b3 Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-04-27CLI output pagerChris Luke3-85/+744
Buffers output from CLI commands as it arrives and allows the terminal to view this buffer one page at a time. - View of the buffer is moved with space/enter/up/down/page-up/page-down/ home/end. - At the end of the CLI command if less than one page of output was generated then the pager is not engaged. - 'q' to quit the pager, or scroll off the bottom. - Pager prompt displays the current view aperture line numbers and total number of lines buffered. - Can be disabled at runtime with "no-cli-pager" in the unix configuration. - The number of lines that will be stored in the buffer is limited to prevent excessive memory use; this limit is configurable with "cli-pager-buffer-limit" in the unix configuration. - Both these options can also be set in the console with "set terminal pager [on|off] [limit <lines>]". Limitations: - Does not yet implement a search function. - Whilst the terminal size is detected and tracked, changing the terminal size when the pager is being used will not cause a redraw of the page. - Lines that wrap the right most column are not yet handled gracefully. Change-Id: I69548c1464eff79c53e122668f25758266daf1c2 Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-04-27Add "history" CLI commandChris Luke1-24/+48
- Remove the '?' mechanism that previously only worked on telnet connections in favor of a more shell-like "history" command. The '?' approach had strange side-effects, like executing what was already in the command buffer. Change-Id: I043086b7f400c66c332a32dbd06ef580ecb18ee8 Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-04-27Add a (small) banner to the Debug and Telnet CLIChris Luke3-2/+65
_______ _ _ _____ ___ __/ __/ _ \ (_)__ | | / / _ \/ _ \ _/ _// // / / / _ \ | |/ / ___/ ___/ /_/ /____(_)_/\___/ |___/_/ /_/ - For terminals that look like they support ANSI output the FD.io part is colored red. - This is only shown at the start of a debug CLI or a telnet CLI session. - This banner can be disabled with "cli-no-banner" in the "unix" section of the startup config file. Change-Id: I085b3780dcca3eae546859dbde6c1c34c8258b9f Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-04-27Debug/Telnet CLI enhancementsChris Luke2-222/+1063
A fairly comprehensive re-work of the built-in debug and telnet CLI to add various command line editing features and to add command history to the debug CLI. This may seem like a large change but a good amount of it is merely reworking the existing CLI code (which changed its indent level). The features this patch enables include: - Enable history in the debug CLI. - Put both stdin and telnet connections in char-by-char mode. - Echo from the server, not the client, for more control. - Add a mostly no-op but fairly complete Telnet protocol processor. - Perform control code parsing on the input byte stream to match strings of both control codes and ANSI/VT100 escape sequences. - Up/down keys scroll through the history (like ^P/^N). - Do CRLF output cooking (\n -> \r\n) for connections that need it. - Left/right cursor movements, insert/erase at cursor. - Home/end cursor jumps. - Jump left/right word at a time (Ctrl-left/right). - Negotiate the terminal type from Telnet clients. (well, the code doesn’t really negotiate, it demands it, but the client is led to believe it was a negotiation) - Read terminal type from TERM variable for the local debug CLI. - Delete from cursor to end of line (^K). Delete char-right (^D/Del). - Clear screen (^L) and repaint prompt/current command (on non-ANSI terminals it just newlines and repaints the line). Change-Id: Id274b56ccfd4cc8c19ddc0f478890f21f284262a Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-04-26Make automake silent rules defaultDamjan Marion1-1/+1
Change-Id: Ia504ccdac1deac20f20cf7fb76f78b2d8c505474 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-26Fix compile errors reported by clangDamjan Marion2-2/+2
For using clang as a compiler it is enough to specify CC=clang in the make command line Change-Id: I06f1c1d418b68768f8119de5bdc8748c51f90c02 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-25Allow the number of elements in a frame queue to be specified per thread.Bud Grise2-1/+8
Change-Id: I026a61a943960dc52539565968a942fbd851da93 Signed-off-by: Todd Foggoa <tfoggoa@cisco.com>
2016-04-25Improve mechanism for using loopback interface as BVI for BDsJohn Lo1-4/+5
When loopback interface is configured as BVI, instead of changing its output node from loopN-output to l2-input, the loopN-output node is now kept while its next tx node is changed from ethernet-input to l2-input. The packet setup previously done in bvi_to_l2 as part of l2-input is now performed in the loop output node. This change adds an extra node in the BVI output path but provides the following improvements: 1. IP address/route created on loopback prior to it being configured as BVI will still work properly. The requirement to (re)configure IP/route on loopback after it is configured as BVI is removed. 2. The output stats for loopback interfaces are always provided irrespective of their BVI configuration. 3. The loopback-BVI output stats can be batch updated outside the packet loop in output node, instead of per packet update in l2-input node, making l2-input node more efficient for BVI packets. 4. Restore original node property as implemented in node.c function vlib_node_add_next_with_slot() where next node indices stored in next slots of each node will remain unique. 5. Packet trace for BVI output includes loopN output node which provides useful packet data. Change-Id: I7f5bc72ef953a367363a179088210596881f9e73 Signed-off-by: John Lo <loj@cisco.com>
2016-04-22Add clib_memcpy macro based on DPDK rte_memcpy implementationDamjan Marion12-36/+34
Change-Id: I22cb443c4bd0bf298abb6f06e8e4ca65a44a2854 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-19VPP-6: set epoll wait-time to zero when binary API messages are waitingDave Barach2-4/+7
Change-Id: I629ef98ecd3b729d2564b3a1ba8c6039f854f86c Signed-off-by: Dave Barach <dave@barachs.net>
2016-04-18Add support for AArch32Christophe Fontaine5-10/+35
gcc version 4.9.2 (Raspbian 4.9.2-10) Tested on Linux raspberrypi 4.4.6-v7+ #875 SMP Tue Apr 12 16:33:02 BST 2016 armv7l GNU/Linux CPUs may be little or big endian, detect with gcc flags, not the processor architecture Add a new flag $(PLATFORM)_uses_openssl which allows to disable the link with openssl lib. vlib/vlib/threads.c: startup.conf must: - specify the heapsize as we don't have hugepages on raspbian cpu { main-core 3 } heapsize 64M Corrects in various files the assumption uword == u64 and replaces 'u64' cast with 'pointer_to_uword' and 'uword_to_pointer' where appropriate. 256 CPUs may create an OOM when testing with small memory footprint ( heapsize 64M ), allows the number of VLIB_MAX_CPUS to be set in platforms/*.mk vppinfra/vppinfra/longjmp.S: ARM - copy r1 (1st parameter of the setjmp call) to r0 (return value) vppinfra/vppinfra/time.h: On ARMv7 in AArch32 mode, we can access to a 64bit register to retreive the cycles count. gcc on rpi only declare ARM_ARCH 6. Override this info, and check if it is possible to use 'mrrc'. /!\ the time function will NOT work without allowing the user mode access to the PMU. You may download the source of the kmod here: https://github.com/christophefontaine/arm_rdtsc Change-Id: I8142606436d9671a184133b935398427f08a8bd2 Signed-off-by: Christophe Fontaine <christophe.fontaine@qosmos.com>
2016-04-14Rework of DPDK PCI device uio driver binding processDamjan Marion7-109/+1227
This is complete rework of DPDK PCI initialization. It drops previous scheme where lspci/route/awk/sed are used and instead sysfs is solely used for discovering Ethernet PCI devices. Criteria for blacklisting device is changed from exsiting routing table entry to simple interface state obtained by SIOCGIFFLAGS ioctl(). It checks for IFF_UP flag, so as long as interface is declared up and even when carrier is down interface will be blacklisted. Change-Id: I59961ddcf1c19c728934e7fe746f343983741bf1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-14Change ARP and IP6-ND nodes to use interface-output node for outputJohn Lo1-5/+4
The current mechanism for setting up arp-input and ip6-discover-neighbor output nodes for interfaces using their interface link up/down callback function is inefficient and has potential timing issue, as observed for bonded interface. Now both nodes will setup output interface sw_if_index in the the sw_if_index[VLIB_TX] field of current packet buffer and then use the interface-ouput node to tx the packet. One side effect is that vlib_node_add_next_with_slot() needs to be modified to allow the same output node-id to be put at the specified slot, even if another slot contain that same node-id already exist. This requirement is caused by BVI support where all loopback interfaces set up as BVIs will have the same output node-id being l2-input while, for output-interface node, the output slot must match the hw_if_index of the interface. Change-Id: I18bd1d4fe9bea047018796f7b8a4d4c20ee31d6e Signed-off-by: John Lo <loj@cisco.com>
2016-04-12Add counter for the number of barrier syncs performed.Bud Grise2-0/+3
Change-Id: I42b26c8f95c17577006f13e3419b8ccc9ef7c4f3 Signed-off-by: Todd Foggoa <tfoggoa@cisco.com>
2016-04-12Add a configurable "significant error" metricDave Barach1-5/+20
Change-Id: Idda59272a029ffcbc029f9bb167508d7bd5e6e21 Signed-off-by: Dave Barach <dave@barachs.net>
2016-04-11Propagate the VLIB_FRAME_NO_FREE_AFTER_DISPATCH flag to cloned next_framesBud Grise1-0/+6
Without this, frames can be double-freed to nodes like "error-punt", leading to buffer leaks and other problems. Change-Id: Ie28a4f504254ee439f720dbaac7f12206cea753b Signed-off-by: Todd Foggoa <tfoggoa@cisco.com>
2016-04-06Do not listen unless configured with cli-listen.Ed Warnicke1-4/+5
I noticed while mucking about with lsof that vpp was listening on port 5000. telnet 0 5000 revealed that it was listening for the cli on that port. Digging into the code, it turns out that if you do not configure cli-listen (Example: unix { cli-listen localhost:5002 } ) Then vpp is listening on the first available port starting at port 5000 anyway. This is a simple patch to *not* listen unless configured to do so. Change-Id: Id7f6f4d69e0a1642d2767849a90b21f38f21ecaa Signed-off-by: Ed Warnicke <eaw@cisco.com>
2016-03-29Adjacency allocatorDave Barach1-0/+1
Change-Id: Ieacbfa4dbbfd13b38eaa2d37f618f212cef4e492 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-03-28event logger skeletons, improve debug CLIDave Barach2-5/+183
Change-Id: Ieb2e4043fc7bc3b4a5436a7a6aa35f573d8d4506 Signed-off-by: Dave Barach <dave@barachs.net>
2016-03-26Improve main-loop event-logsDave Barach2-12/+13
Change-Id: I984debeffe0dce36c9e7ab963f25d862cc7550cc Signed-off-by: Dave Barach <dave@barachs.net>
2016-03-25Use rte_mempool private data for storing vlib_buffer_tDamjan Marion3-53/+80
Change-Id: If3fc88a35bc0b736376113a39667caea42802ea1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-03-18Fix longstanding next-frame clone bugDave Barach1-6/+0
Do not propagate flags into cloned vlib_next_frame_t's. vlib_next_frame_init(...) sets nf->frame_index to ~0. If it turns out that the original flags include VLIB_FRAME_IS_ALLOCATED, the wheels fall off. And so on. Change-Id: I8de18653acfcc8eb20cee36f4eb5b9e82234f21b Signed-off-by: Dave Barach <dave@barachs.net>
2016-03-16Add vpp native linux kernel AF_PACKET interface supportDamjan Marion2-0/+3
This is 1st drop of VPP native driver for linux AF_PACKET. New CLI: create host-interface name <host-if-name> [hw-addr <mac-address>] References: - Documentation/networking/packet_mmap.txt in the Linux kernel tree - man 7 packet Known issues: - attaching to linux bridge doesn't work - it is not expected to work in multicore setup Change-Id: I1cb1c3d305f349759e90e76e25696718b73bd73d Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-03-03Copy flags when cloning next_framesNikhil P Rao1-0/+6
The VLIB_FRAME_NO_FREE_AFTER_DISPATCH flag is not preserved when cloning next_frames, as a result VLIB_FRAME_FREE_AFTER_DISPATCH can erroneously be set for a frame (see vlib_get_next_frame_internal()) Change-Id: Ice1d7ddcb807e1168aa0c157d9474be492d102c2 Signed-off-by: Nikhil P Rao <nikhil.rao@intel.com>
2016-03-02TAP: Jumbo-frame support.Ole Troan3-1/+28
Change-Id: I3a0726d7645f775738253d0a47ee04d94d138c9a Signed-off-by: Ole Troan <ot@cisco.com>
2016-03-02Remove spurious call to unix_physmem_init(...)Dave Barach1-2/+0
It turns out that unix_physmem_init(...) has been effectively disabled for a very long time. The vnet library supplied a weak symbol override for the vlib_app_physmem_init(...) which returned 1, meaning "do nothing." When we switched libvnet.a -> libvnet.so, the symbol override stopped working. Presto: unix_physmem_init(...) romps all over the data set up by vlib_buffer_pool_create(...), leading to ASSERT failures and/or bus errors, but only when using worker threads. Even then, the failure depended in some complicated way on library dynamic load order. We should remove .../vlib/vlib/unix/physmem.c entirely once we're sure we'll never want it back. Change-Id: I27747edbeb0de88d2f2d8728f7f8eb3135e7f0cf Signed-off-by: Dave Barach <dave@barachs.net>
2016-02-26Add packet tracing hintBud Grise2-0/+7
This avoids checking the buffer flags bit if tracing is not enabled. Change-Id: I32e1a90b5fd10318254c611344488bc2a441c71e Signed-off-by: Todd Foggoa (tfoggoa) <tfoggoa@cisco.com>
2016-02-26Add support for native vpp_lite (non-dpdk) platformDamjan Marion1-1/+2
Change-Id: Icaa71957f67b923bc9795baa78c7495055615672 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-02-24Link the vpp application against libvnet.so, not libvnet.aDave Barach2-1/+10
Turn of srp, mainly as an example of how to restructure a featurette for selective disablement. Change-Id: Id3364c58a8711b103939f4434adfa67177380f67 Signed-off-by: Dave Barach <dave@barachs.net>
2016-02-18Add jumbo frames support to non-dpdk vhost interfaces.Pierre Pfister3-0/+165
This code provided inter-VM (2 cores per VM) throughput of 22Gbps using iperf through VPP (1 core) with 9k frames. With the same setup and pktgen running on both sides, it reached 5Mpps with no packets drop (Equivalent to before the patch). During the tests the average vector length was about 1, which likely means that VPP is not the bottleneck. The patch also includes some generic functions for vlib buffers allowing for chained buffer construction whether or not DPDK is enabled. Change-Id: Icfd1803e84b2b4578f305ab730576211f6242d6a Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2016-02-16Increase number of per-cpu mheaps to 256Damjan Marion1-0/+4
It also includes check to ensure that number of per-cpu mheaps is not lower than number of cpus. Change-Id: Ibc68b34dda130f922243f9ea15b03e44bbcac269 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-02-14Increase VLIB_MAX_CPUS to 256Damjan Marion3-9/+7
Change-Id: Iac68b38dda1a0f9e2242f9eab5b03e44bbcac269 Signed-off-by: Damjan Marion <damarion@cisco.com>