aboutsummaryrefslogtreecommitdiffstats
path: root/vnet
AgeCommit message (Collapse)AuthorFilesLines
2016-10-31Update _slabshr fields when updating HQoS masksDavid Hotham1-0/+6
Change-Id: Ia1042622c656861a80b856115aeb3c2e5cf5ea2a Signed-off-by: David Hotham <david.hotham@metaswitch.com>
2016-10-31vppinfra: use 64-bit crc32 instruction in bihash_24_8Damjan Marion1-1/+9
Change-Id: Ibeb6d35e15a8d332753df7c352c0b51c277a0ee5 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-10-31vhost-user: fix crash in vhost_user_intfc_tx (VPP-519)Damjan Marion1-6/+0
The crash was the result of indexing off the end of the next[] array. Removing that prefetch code completelly, as it is questionable how much it helps so late in the game. Change-Id: I7bc83483a1088437edb4ac0f95a54c39afce136b Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-10-29IPv6 Classify Forwarding Graph errorsNeale Ranns8-19/+24
Fix a few places where the protocol of the DPO object was incorrectly set and hence the graph traversed by the packet jumped between ip4 and ip6 nodes. Change-Id: I75c4ecfdf79df39f5dbb7c68f1fc82ff04aaed28 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2016-10-28policer: replace uintX_t with uX, fix styleDamjan Marion8-1764/+1926
Change-Id: Ie4a0ba57d5c672ab04fe37801836f65d8731a90a Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-10-27Fix potential L2 forwarding crash with stale L2FIB entry (VPP-516)John Lo4-50/+44
On moving interface between L2 and L3 forwarding modes, adjust the l2-output node next index for the sw_if_index of the interface so packet output via stale MAC entries in L2 FIB will be dropped. Change-Id: I25afd7a617edb4ae35ce296bac33e62683edad9a Signed-off-by: John Lo <loj@cisco.com>
2016-10-27Fix coverity issues in LISPFilip Tehlar1-1/+2
Change-Id: Ifef27540f02f423070e8843951be5cba0acea8cf Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-10-27Per-packet IPFIX record generation pluginDave Barach1-1/+1
Change-Id: Ia790aa018e70d67ed343e3e466d1b33b22560fc0 Signed-off-by: Dave Barach <dave@barachs.net>
2016-10-26features: fix crash due to missing null terminationDamjan Marion1-8/+8
Change-Id: I98b407f9b698307c5a0007b198a734674b33f925 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-10-26dpdk: enable building with dpdk 16.11-rc1Damjan Marion2-0/+28
Works with: http://dpdk.org/browse/dpdk/snapshot/dpdk-16.11-rc1.tar.xz placed into dpdk/ or ~/Downloads Change-Id: I17f6a721529dbefc796f555e2525d157b9bf8740 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-10-26dpdk: remove support for dpdk 16.04Damjan Marion10-2602/+3
This also removes old DPDK vhost-user code which doesn't help much with DPDK 16.07 or newer. Change-Id: Ic996df1eaccc33acd3fa6cabeaf7381a672c2a90 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-10-26dpdk: remove support for dpdk 2.2Damjan Marion3-68/+0
Change-Id: I2d1a7063f3776a9070e75a627beb5d0e45a67874 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-10-26dpdk: remove KNI supportDamjan Marion5-228/+2
This code is outdated and without real use case Change-Id: I30628cc4ca293e5249aea3891173507cbfad8b61 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-10-26Use only 24 bits for vni in lisp-gpe data packetsFlorin Coras2-3/+4
Change-Id: I5a8ff12dfa8d4d9f24275590ff8293e7eb7ffbb6 Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-10-25dpdk: remove dpdk_pmd_constructor_initDamjan Marion1-71/+0
This is not needed anymore, likely because we use --whole-archive parameter during linking. Change-Id: Iab0f2ec647b63c59663faceacfbc60aa4a4b84a6 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-10-25Support IETF routing Yang models (VPP-503).Neale Ranns26-99/+700
Add support for special routes to send ICMP unreachable or admin prohibited. Change-Id: Ia1ac65b0e5e925c0f9ebc7824141833b4e18f05e Signed-off-by: Neale Ranns <nranns@cisco.com>
2016-10-25Fix LISP src/dst based policyFilip Tehlar4-13/+259
Change-Id: Ibcc58ad50e33cd26367fd28f60334e29f45a094c Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-10-24Fix VXLAN tunnel delete crashJohn Lo1-2/+2
Change-Id: I610648f28b7504798da9e377ea099629aa7a5150 Signed-off-by: John Lo <loj@cisco.com>
2016-10-23Dual Loop Lookup and Adj-midchainNeale Ranns2-145/+534
Change-Id: Id78b6dc637626c01b64bd5868d22425a30318348 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2016-10-21Fix Coverity Errors in FIB. This is mainly consolidating the vnet_link_t and ↵Neale Ranns18-153/+120
fib_link_t enums into just vnet_link_t. Change-Id: Id2147afec1a28e95fec86dfd524088cd56563f63 Signed-off-by: Neale Ranns <nranns@cisco.com>
2016-10-21Quad-loop ip4_lookup_inline, add _x4 validate buffer enqueueDave Barach1-65/+115
Change-Id: I80a25fa90d8a65db619b8697cede2b98bed37cea Signed-off-by: Dave Barach <dave@barachs.net>
2016-10-18Deprecate MPLSoGRE tunnels (VPP-502)Neale Ranns13-1359/+110
Add shared memory APIs for MPLS routes and MPLS to IP prefix bindings. Change-Id: I85b074a4dadc8249c410fdabd8ea019d20479cf8 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2016-10-18Update tx and output node runtime when recycling interfacePierre Pfister1-0/+18
When an interface is removed, and another one is created, the nodes from the previous interface are reused. The current code fails when the new interface type differs from the original. It is necessary to update the node runtime, in particular the node function, and the node format function. Jira: VPP-460 Change-Id: I2fc3c609e0173a7f62597230768669039853ab03 Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2016-10-18Load-balancing in IP4 dual loop typos. (VPP-501)Neale Ranns1-2/+2
Change-Id: I7b70d52d11c228ec5e790632a91b042b34b38d28 Signed-off-by: Neale Ranns <nranns@cisco.com>
2016-10-17VPP-491: Update CLI Command documentation for "show ip fib" and "show ip6 fib".Billy McFall4-108/+331
Change-Id: I9d1d02ffbb3cdbe8c4a3f335ece40f3dcbd848a7 Signed-off-by: Billy McFall <bmcfall@redhat.com>
2016-10-17Support MPLSoGRE with the new FIB 2.0John Lo3-127/+50
Note that the new way to provision MPLSoGRE is using the "normal" GRE tunnel such as in the following example: create gre tunnel src 10.0.3.1 dst 10.0.3.3 set in state gre0 up set int ip addr gre0 10.0.4.1/30 set int mpls gre0 enable ip route table 4 6.0.0.0/24 via 10.0.4.2 gre0 out-label 30 mpls local-label add 30 eos ip4-lookup-in-table 4 The previous CLIs/APIs used to configure MPLSoGRE tunnel such as "create mpls gre tunnel...", "mpls encap|decap add label .." and "show mpls tunnel", etc. can not be used. They will be deprecated in a later update to the VPP code base. Change-Id: I244916841924dc2b87d2143691cd8476716c06b1 Signed-off-by: John Lo <loj@cisco.com>
2016-10-17style: fix VLIB_NODE_FUNCTION_MULTIARCH indentDamjan Marion3-15/+26
Change-Id: I9c23ddbbd576e8c900ba82425572ed7a3c4f56e3 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-10-17VPP-492: Fix ability to change mac address of the interfacePavel Kotucek1-2/+5
Fixed Coverity complaining about the clib_memcpy used in /vnet/vnet/interface.c Change-Id: I401f05aea1066d829abac1555021e1180b4a161e Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2016-10-15VPP-488: Fix build errors, which uncovered IPv6 load balance lookup bug.Billy McFall12-35/+74
Change-Id: Id17fcb9154c5337908f29b7ce3a282b6a4b72d64 Signed-off-by: Billy McFall <bmcfall@redhat.com>
2016-10-14VPP-490: vpp crash in show ip6 neighborBilly McFall1-8/+11
Change-Id: I003f95db85ce5085045c607f0b1daaefa792c910 Signed-off-by: Billy McFall <bmcfall@redhat.com>
2016-10-14VPP-489: CLI Command "test lookup" crashes with invalid fib-index.Billy McFall1-1/+8
Change-Id: If4c47b91e949483675cf569cd474b6c85fecef05 Signed-off-by: Billy McFall <bmcfall@redhat.com>
2016-10-14FIB2.0: Adjacency complete pull model (VPP-487)Neale Ranns53-1524/+1968
Change the adjacency completion model to pull not push. A complete adjacency has a rewirte string, an incomplete one does not. the re-write string for a peer comes either from a discovery protocol (i.e. ARP/ND) or can be directly derived from the link type (i.e. GRE tunnels). Which method it is, is interface type specific. For each packet type sent on a link to a peer there is a corresponding adjacency. For example, if there is a peer 10.0.0.1 on Eth0 and we need to send to it IPv4 and MPLS packets, there will be two adjacencies; one for the IPv4 and one for the MPLS packets. The adjacencies are thus distinguished by the packets the carry, this is known as the adjacency's 'link-type'. It is not an L3 packet type, since the adjacency can have a link type of Ethernet (for L2 over GRE). The discovery protocols are not aware of all the link types required - only the FIB is. the FIB will create adjacencies as and when they are required, and it is thus then desirable to 'pull' from the discovery protocol the re-write required. The alternative (that we have now) is that the discovery protocol pushes (i.e. creates) adjacencies for each link type - this creates more adjacencies than we need. To pull, FIB now requests from the interface-type to 'complete' the adjacency. The interface can then delegate to the discovery protocol (on ethernet links) or directly build the re-write (i.e on GRE). Change-Id: I61451789ae03f26b1012d8d6524007b769b6c6ee Signed-off-by: Neale Ranns <nranns@cisco.com>
2016-10-13feature: rename vnet_ip_feature_* to vnet_feature_*Damjan Marion8-54/+54
Change-Id: Idf68266f705b0455e5ab0ac73d23c7e0f4120d5b Signed-off-by: Dave Barach <dave@barachs.net> Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-10-13VPP-286: Add CLI Command documentation via doxygen comments for vnet/vnet/ip.Billy McFall14-164/+1105
Change-Id: Ie1be9dc057d07c250852952ea159ed3c44c25f5f Signed-off-by: Billy McFall <bmcfall@redhat.com>
2016-10-13vhost-user: Add reconnect supportDamjan Marion1-0/+1
QEMU 2.7 introduces reconnect support. However it doesn't send last state of last_avail_idx in the SET_VRING_BASE. With this patch we are overriding SET_VRING_BASE with value taken from used->idx. It is a bit hackish as it basically overrides SET_VRING_BASE provided value but it should work in most of the cases. This is what author of reconnect code is also suggesting in his post: https://lists.gnu.org/archive/html/qemu-devel/2016-06/msg01495.html Change-Id: I10e5f401c409d2989bf6c43eaea377800a9c76df Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-10-13VPP-483: Fixed IPSec tunnel interfaceMatus Fabian1-1/+10
Change-Id: I570f57218293a4824f83b38575eacdbe3da540d8 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-10-13vpp_lite: add cpu pinning support (VPP-467)Pavel Kotucek3-6/+6
Proper cpu pinning in vpp_lite platform, like in normal vpp image. Extended “show threads” command to show propper information. Changed handling of coreID and socketID for threads in "show threads" CLI, pthread_getaffinity is used instead of info stored in DPDK. Change-Id: Ic8299ec5e284472bb10a37a95fadeed57b6edae8 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2016-10-12Fix coverity warnings, VPP-486Dave Barach2-2/+2
Change-Id: I7a14d9a28514cdb49f65fab1b120b53239fed7e3 Signed-off-by: Dave Barach <dave@barachs.net>
2016-10-12VPP-213: vnet classifier does not work for l3 ip4 rulesOle Troan1-26/+34
The classifier was written with the assumption that next-indicies of IP4 and IP6 IP_LOOKUP_NEXT nodes are equal. That's not true, and this patch splits the classifier session for IP4 and IP6. Change-Id: Id0368f17bb1d3f145b771d2dc283b56871264e99 Signed-off-by: Ole Troan <ot@cisco.com>
2016-10-12Coverity warnings in new FIB code (VPP-484)Neale Ranns9-7/+27
Change-Id: Ie221e246dd8c6a1b3c76e7aa85924762d4397782 Signed-off-by: Neale Ranns <nranns@cisco.com>
2016-10-12VPP-362 Implement dumping of LISP adjacenciesFilip Tehlar3-3/+98
Change-Id: Ieea56f3bf9e749878d9f2b35d39d9f7a9cdabde4 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-10-11Rename ip_feature_init_cast(...) to vnet_feature_arc_init(...), VPP-481Dave Barach9-306/+341
Eliminate an unused parameter in vnet_feature_arc_init(...) which eliminates a spurious relationship between feature arcs and ip. Add doxygen tags for 2x debug CLI commands, and for vnet_feature_arc_init(...) Change-Id: If83589539bcbbbd4d85e84458dd7eb7eb08837a0 Signed-off-by: Dave Barach <dave@barachs.net>
2016-10-10ipfix: add l4 unformat support for mask and match (VPP-204)Juraj Sloboda2-11/+201
Change-Id: Iff32c488af9b71acbc4e572c6741afae0a67333c Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2016-10-10ipfix: add classification nodes for flow statistics (VPP-204)Juraj Sloboda9-1/+647
In order to have meaningfull IPFIX implementation we should be able to classify all packets flowing through vpp. But existing IPv4 and IPv6 classifier nodes are called only if destination IP address is local to vpp. This commit adds new IPv4 and IPv6 classifier nodes that should be used for collecting flow statistics. Change-Id: I60e60105663ba15b5200862a23bb817047fe4d1a Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2016-10-10FIB2.0: memory leaks during load-balance update (VPP-475)Neale Ranns12-333/+658
some other fixes and enhancemets to address failures in the IPv6 Scale testing: - The rate at which VPP sends ARP/ND requests, 1 per-millisecond, is too high. This is reduced to 1 every 10 ms. probably still too high. - If an ARP/ND response is received that does not contain a change to the known MAC address, no further processing is done. - Added stats to get info about the async FIB walks. - When walking FIB entries and performing a load-balance update, it is not necessary to re-insert the LB in the forwarding table. Change-Id: Ifd47e4bdbce94495f44aaf1b78e7d1395ed870d1 Signed-off-by: Neale Ranns <nranns@cisco.com>
2016-10-10Fix double free in af_packet api/cliIvan Kelly2-3/+7
The api was allocating a vector for the name, passing it, then freeing it, on create. The cli allocated, passed then forgot about it. af_packet_create_if was storing a reference to the name, which in the case of the api, meant it was referencing dead memory. On af_packet_delete_if this reference was freed, so in the api case, there was a double free. Also, the cli for delete leaked the name. Change-Id: I4d572bd2936eaf8ea7a0a8ff282e83ac2bf1b062 Signed-off-by: Ivan Kelly <ivan@midokura.com>
2016-10-07unicast RPF for FIB2.0Neale Ranns22-207/+1223
In a heirarchical FIB performing a unicast RPF check would require the traversal of the data-plane graph to seek out all the adjacency objects and then read those to find their interface. This is not efficient. Instead, for each path-list we construct a list of unique input interfaces and link this uRPF-list against the entry in the prefix table. In the data-plane the uRPF list can be retrieved from the load-balance lookup result and the RPF check is a simple and efficient walk across the minimal interface list. The uRPF-list is maintained as the routing heirarchy changes, in a similar way to the data-plane object graph. We also provide a knob to allow an arbitrary prefix to pass the loose check. Change-Id: Ie7c0ae3c4483ef467cfd5b136ee0315ff98ec15b Signed-off-by: Neale Ranns <nranns@cisco.com>
2016-10-07VPP-395 Add udp-punt node(s) and APIAlexander Popovsky (apopovsk)5-3/+379
Uses existing UDP local API in order to register requested UDP port punt to the host. CLI: set punt udp [del] <port> API: punt protocol <l4-protocol> [ip <ver>] [port <l4-port>] [del] * Only UDP (l4-protocol = 17) is supported at this time Change-Id: I9232af1c891d1ed174d77f3e0dfe60c4b9d85e40 Signed-off-by: Alex Popovsky <apopovsk@cisco.com>
2016-10-07VPP-464: Fix IPSec-GRE tunnel input with FIB 2.0Matus Fabian2-0/+10
Change-Id: Ic29592d39f1d672cb6e7e32b4af6123683e022a7 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-10-06Fix IP6 ND solicitation termination to allow link-local source IPJohn Lo2-5/+3
Move check for link-local source IP address for MAC/IP notification only. Allow generation of response to IP6 ND solicitation request if a match is found for target IP irrespective of source IP type. Change-Id: Ib79d4b75fb4fe8aece625fd8cd26c8b9fc75ea47 Signed-off-by: John Lo <loj@cisco.com>