aboutsummaryrefslogtreecommitdiffstats
path: root/vnet
AgeCommit message (Collapse)AuthorFilesLines
2016-05-18Add netmap APIMatus Fabian4-6/+17
JIRA: VPP-66 Change-Id: I421529fa8eafe5268745a34a4fcd40156defcdf8 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-05-18Rework of the old PCI codeDamjan Marion1-4/+3
* adds support for VPP native PCI drivers using standard uio_pci_generic kernel driver * adds generic PCI interrupt callback * splits code to generic PCI handling and linux specific * adds new debug cli 'show pci [all]' Change-Id: I447c2285e319e9725d70688c1b70c9dedda51fdc Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-05-17dpdk/build - 32bits compilationChristophe Fontaine3-27/+27
In vnet/vnet/devices/dpdk/device.c, post 2 event data instead of merging them into 1 u64. Change-Id: I8b1d61b894279fb6eb57bb82a05affc14360e6b8 Signed-off-by: Christophe Fontaine <christophe.fontaine@qosmos.com>
2016-05-17dpdk/init - Add compatibility to non numa architectureChristophe Fontaine1-4/+25
On non numa aware platforms, the path "/sys/devices/system/node/node%u" does not exist: the "free_hugepages" count is available in "/sys/kernel/mm/". Change-Id: Id62018a2bd0937d267663699c620e89d02c26a72 Signed-off-by: Christophe Fontaine <christophe.fontaine@qosmos.com>
2016-05-17Fix output feature issue where opque field is already used by previous nodeDamjan Marion2-3/+8
Change-Id: I1470993668fa8c740229149bbb227bd1e410d5ab Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-05-16VPP-61 Patch2/2 Removing NSH from VPP for move to NSH_SFCKeith Burns (alagalah)10-1038/+5
Change-Id: I76359b621b2edc599cf2e9ee845d97293a5d46f7 Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2016-05-16VPP-61 Patch1/2 - Remove NSH from VPPKeith Burns (alagalah)4-73/+0
- Had issues with original patch and CSIT, breaking into -- Makefile and API changes -- Follow up patch removing NSH directory Change-Id: I6c2f49a74d59b97ce4ea43799cc6f01f5cb1d5a2 Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2016-05-16Add configure policer APIMatus Fabian3-43/+57
JIRA: VPP-67 Change-Id: I04560d78e2eb131cd6cc31472b70b3d3e8fdd79a Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-05-16VPP-68: L2 Rewrite: Support for chained classify tablesPierre Pfister1-0/+18
The classifying capabilities are pretty limited if only a single table can be used. This patch adds support for chained classify tables to L2 Rewrite feature. Change-Id: Ib678fe2028f17b441adb75d85bf3e31185e42c59 Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2016-05-16VPP-69: Create fib or bridge domain with arbitrary IDPierre Pfister6-3/+89
It appeared to me that it might be usefull to allow users to create fibs or bridge domains without a complete knowledge of the current used IDs. These changes define fib and bridge domain constructors when the provided ID is ~0. In such a case, an unused ID is used to create a new fib or bridge domain. Change-Id: Iaba69a023296e6d17bdde45980f9db84832a3995 Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2016-05-15ONE-13: Add CLI/API for LISP static remote mappingsFilip Tehlar4-1/+252
Change-Id: Ic4c717af9629541bac0a0e6c65d0157619c8f578 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-05-14VPP-63: clean up config scripts, remove specific hostnamesDave Barach37-59/+45
Change-Id: Ifb77256fa691b1a90045a10448835c09b764e74f Signed-off-by: Dave Barach <dave@barachs.net>
2016-05-13ONE-7: Fix map-request encapsulationFlorin Coras1-68/+81
We now try to find the first map-resolver IP we have a route to and decide the ip lookup node according to map-resolver IP. Change-Id: I68fc12861dc1e9a203ebf6caefd4f053a741a785 Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-05-13VPP43 - NSH refactoring: Added nsh-map nodesKeith Burns (alagalah)19-2440/+1672
- removed vnet/vnet/nsh-gre - removed all nsh from vnet/vnet/nsh_vxlan_gpe to vnet/vnet/nsh - moved vnet/vnet/nsh_vxlan_gpe to vnet/vnet/vxlan_gpe - added cli and binary api for VXLAN GPE tunnels - plan to move vnet/vnet/nsh to new repo (sfc_nsh) and make plugin - added cli for NSH (binary API will be done in sfc_nsh) - vnet/vnet/gre will be extended in VPP-54 Change-Id: I1d27def916532321577ccd68cb982ae0d0a07e6f Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2016-05-13ONE-11: Fix bugs in LISP APIAndrej Kozemcak1-1/+1
- check input variables - in locator_set dump, add support for remote locator_set Change-Id: Ib10028e83fead358f820ae45c71b6ca4dfbe2f1e Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
2016-05-11ONE-9: Fix clang build errorsFlorin Coras2-4/+4
Change-Id: Icbf3e269471ee0fc1d21f842b2ea220328a0f891 Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-05-11ONE-8: Fix adj signature issuesFlorin Coras2-29/+37
When inserting routes into ip4/6 fibs, we first added a dummy adjacency and afterwards manually updated its rewrite header to enable src/dst forwarding. The downside to this is that the adj signature is changed and therefore when deleting a route the adjacency signature is not removed from adj_index_by_signature hash resulting in crash if the same adjacency is re-inserted. This patch avoids the issue by enforcing the insertion of 'complete' adjacencies thereby obviating the need to update the rewrite header. Change-Id: Ib43bfe72a65e2cf9ef7685a99596eb1d7723e543 Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-05-11ONE-6: dp is not programmed when re-enabling LISPFilip Tehlar1-6/+24
Change-Id: I4c0c5d44168da811a713943275430a378ff46929 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-05-10ONE-4: Add LISP enable/disable API/CLIFilip Tehlar4-0/+147
This patch adds an enable/disable API/CLI for control plane which calls similar functions for data plane. When re-enabling it also re-populates dataplane with tunnels and interfaces. Change-Id: Id8c3d6af90ecc0be331d502756914b1f62824046 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-05-09ONE-3: Delete dst route when src fib is emptyFlorin Coras1-1/+21
Properly check that src fib is empty. Change-Id: I4072169027a404cad66eaaa8450f7c18f1fa8073 Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-05-09VPP-44: iOAM service and path verification using shamir's secret sharingShwetha Bhandari7-12/+1127
Change-Id: I445ad13f8f93cb75cacc94192c4ae85c8ca14e35 Signed-off-by: Shwetha Bhandari <shwethab@cisco.com>
2016-05-09ONE-5: Remove unused vnet_lisp_gpe_add_del_tunnel APIFlorin Coras2-46/+23
Change-Id: Ib22ec807d2b74b7c3cb37f66052cd07bc4d896db Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-05-07VPP-45 Fix crash when GRE packet received on new i/fChris Luke1-0/+3
If a GRE tunnel is created, no other interface added and the GRE tunnel is not set "up" then a crash occurs on the first packet for this tunnel because fib_index_by_sw_if_index[] does not yet have a mapping to the fib the new interface is in. The code to set this is missing from gre/interface.c Change-Id: I567ad74a2af3ea5afe4a40ed39a1d4395642f77c Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-05-06VPP-34 GRE traffic blackholes in encap directionChris Luke1-1/+12
The GRE code is missing the logic to indicate the "hardware" interface is up. The fix is to listen for admin up/down events on the "software" interface and reflect that into the hardware interface state. Change-Id: If06e4f03989b2c52c32f50c11e1943e42bb2609f Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-05-06Check IP adj_index to make sure it is valid to prevent possible crashJohn Lo2-2/+6
Change-Id: I439aac05638fd40e314bec8756e42a32c436321c Signed-off-by: John Lo <loj@cisco.com>
2016-05-05Fix vpp_lite build caused by missing definition of unlikely macroDamjan Marion1-1/+1
Change-Id: I11b34e171c1c7907dd3faec219866418b4e792f6 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-05-05ONE-2: Add new LISP dump API for lisp gpeAndrej Kozemcak2-0/+14
API: lisp_gpe_enable_disable_dump Change-Id: I1c8e78f00f9a3f99c1f2f54884af565292e4ccf8 Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
2016-05-05VPP-39 - refactoring of NSH into own folderKeith Burns (alagalah)8-136/+140
- common header files and structs used in both GRE and VXLAN-GPE Change-Id: I06d0b773e936fb011408817237059f24a4beb412 Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2016-05-04NETMAP: Some fixesMohsin Kazmi3-11/+36
1) Correct the NIOCRXSYNC macro on receive side from NIOCTXSYNC. 2) Flush the pending messages in the tx rings. Change-Id: I581040d03b1633a3d6fb22fa1fb285bcb7975afb Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2016-05-04VPP-42: VPP crashes in IPsec code when running multithreadedMatthew Smith5-33/+58
Change-Id: Ib231642cfead5f5e8e45508361a11c87aad83b51 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2016-05-03VPP-15 Add decap-next for nsh-gre tunnel short_helpHongjun Ni1-2/+2
Change-Id: I1965e9852f62aaf8c1576b72446a43b5878eb452 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2016-05-03VPP-15 Add ethernet support for nsh-gre's decap-nextHongjun Ni1-1/+3
Change-Id: Icf3424671b4aa0f619983a3eb61785b533fdc11d Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2016-05-02Small fixes to lisp-gpe header and decapFlorin Coras2-12/+20
- enforce lisp-gpe router mode (set P bit) - fix selection of ip6 decap node - fix dual-dual lool error index init Change-Id: I1a9623c0eb7e81a2cfb60efaa88dc44ee65e664d Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-05-02VPP-31 Fix linker issue with new sr-replicateChris Luke2-5/+1
Changes in gnu ld in Ubuntu 16.04 tickles an issue with the declaration pattern used for vlib_node_registration when, as is the case in sr_replicate.c, the forward declaration is seen by the linker in a module before the real declaration. This patch uses the "extern" keyword in the forward declaration to avoid this issue and removes extra forward declarations. Change-Id: I075b0cd9932404e1360c7f9aec7114003d110f60 Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-05-02VPP-30 sr_replicate requires DPDKKeith Burns (alagalah)3-0/+22
- added fix to disable functionality when no DPDK - may extend to support non-DPDK case in future. Change-Id: Ic8ad4eeb91c4866f3f102dd4a718898eb0419dee Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2016-05-02HONEYCOMB-10: jVpp - the new java API. C code and jar file generationMarek Gradzki1-1/+5
Added comments generation for C and Java files. Change-Id: Ifb670a5592eb871bfe68804f0a8d8f9b5b14f00a Signed-off-by: Marek Gradzki <mgradzki@cisco.com> Signed-off-by: Ed Warnicke <eaw@cisco.com>
2016-05-02Netmap: typo correctMohsin Kazmi1-1/+1
There is a typo mistake in netmap. This patch corrects it. Change-Id: Id358e0de74555ac7858c93fa1335f02abd5624b5 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2016-04-30IP6 SR multicast replicatorKeith Burns (alagalah)10-38/+1124
- adds ability to name tunnel - creates policy as a collection of tunnel names - map ip6 multicast address to policy and replicate packet - adds zero memcpy for invariant portion of packet Change-Id: Icd2fe6a2cf65c09906e82ed1afbb0eae8df79452 Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2016-04-29Fix use of vni throughout lisp codeFlorin Coras2-32/+35
This leverages the vni LCAF support introduced in a previous patch. Change-Id: I0a1b6b9dfc8095d62ad3f4e800b9f2d04c475521 Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-04-29Add indirect next hop supportDamjan Marion4-40/+156
Change-Id: I0626c2650eba7961a15b1e87a664b57bef5503a2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-29Remove unused variable in lisp decapFlorin Coras1-3/+0
Change-Id: I6aef98252e6134fd2f1a30a8407086ab98285a53 Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-04-29VPP-25 Add API for GRE tunnel create/delete/show.Chris Luke2-47/+159
Add API methods to create, delete and show GRE tunnels. Also add missing CLI functionality for deleting and listing configured tunnels. Change-Id: I7565966037d94ade07938e4ff0d9333419716857 Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-04-29Fix ip-udp encap checksum for ip6Florin Coras1-0/+20
Thanks to Chris Luke for reporting. Change-Id: I4f2ac5bb0eb565738755ddb00e8c918134ff67b6 Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-04-29Fix ip4 address formatting in the show ip fib ouptutDamjan Marion2-3/+6
Change-Id: I3ffb2e3cef63cbc9f2abc81bbdedabb34b9b3408 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-29Improve performance of dpdk-vhost driverShesha Sreenivasamurthy1-0/+9
By setting the flag in used table, guest is prevented from kicking the host when it adds buffers. This results in 100% performance improvement when tested throughput using iperf3. Change-Id: Iefaf5b97d1444c216bb373998732a437d333d521 Signed-off-by: Shesha Sreenivasamurthy <shesha@cisco.com>
2016-04-29Add TX statistics for nsh-gre tunnelHongjun Ni1-4/+77
Change-Id: I20e4abcc82c00e43dd441f1882cb6be531b6876e Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2016-04-29Add RX statistics for nsh-gre tunnelHongjun Ni1-1/+81
Change-Id: I045bb9d51c9a82ccba6e792485b9418bd78b8520 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2016-04-29Fix decap-next for ethernet format in nsh-vxlan-gpeHongjun Ni1-0/+2
Change-Id: I9f5efef4c2b821e4c7d76ed6e2c4f52c2495e512 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2016-04-29Add support for LCAF Instance IDFilip Tehlar10-100/+974
Change-Id: Ifce3f2bdcba099157a42d0b694f3161b9f700ed2 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-04-29Add lisp-gpe ip6 data-plane supportFlorin Coras11-755/+1679
The implementation mimics that of the ip4 data-plane. Therefore, a new lgpe-ip6-lookup lookup node is introduced for ip6 source lookups, a lisp-gpe-ip6-input node for decapsulating ip6 encapsulated packets and the tx function of the lisp-gpe interface is updated to support any mix of v4 and v6 in underlay and overlay. Change-Id: Ib3a6e339b8cd7618a940acf0dd8e61c042fd83dd Signed-off-by: Florin Coras <fcoras@cisco.com>