summaryrefslogtreecommitdiffstats
path: root/vnet
AgeCommit message (Collapse)AuthorFilesLines
2016-04-28Fix bug that prevented packet trace from working on multicoreBud Grise1-6/+14
The vlib_node_runtime can change after the thread starts up. Change-Id: Id5bc248c009ef9be26213b36a0115938b61cb8c4 Signed-off-by: Todd Foggoa (tfoggoa) <tfoggoa@cisco.com>
2016-04-28Add ability to set l2_mode_noprotChristian Dechamplain (cdechamp)2-0/+36
Change-Id: I3767a1bbe55452600863e145cbc12b114d6d1024 Signed-off-by: Todd Foggoa (tfoggoa) <tfoggoa@cisco.com>
2016-04-28Add histogram to frame queue tracingBud Grise3-32/+132
Display it via "show frame histogram" CLI. Change-Id: I436a2125f391af85d1743cf8765e5f27fa0ca809 Signed-off-by: Todd Foggoa (tfoggoa) <tfoggoa@cisco.com>
2016-04-28Track number of ethernet vlans in a frameChris Luke8-7/+83
Adds flags to the packet buffer to track the number of VLANs in the current Ethernet frame. We use two bits to signify 0, 1 or 2 VLANs. The value 3 signififies an unknown quantity of VLANs, which includes "three or more" which is not widely supported. We place the bits in the vlib_buffer section; that is not the opaque section, so that all subordinate nodes can use it. For background, see the discussion thread at https://lists.fd.io/pipermail/vpp-dev/2016-March/000354.html The helper macro ethernet_buffer_header_size(buffer) uses these bits stored in "buffer" to calculate the Ethernet header size. The macro ethernet_buffer_set_vlan_count(buffer, count) sets the appropriate bit values based on the number in "count". By current frame we are referring to the case where a packet that arrives from the wire is carrying an encapsulated Ethernet packet. Once decapsulated that inner packet becomes the current frame. There are two places where this value is set; For most Ethernet frames this will be in the "ethernet-input" node when that node parses the Ethernet header. The second place is whenever vnet_update_l2_len() is used to update the layer 2 opaque data. Typically this function is used by nodes just before they send a packet into l2-input. These bits are zeroed in vlib_buffer_init_for_free_list() meaning that wherever the buffer comes from they have a reasonable value (eg, if ip4/ip6 generates the packet.) Primarily this VLAN counter is used by nodes below "ethernet- input" and "l2-input" to determine where the start of the current Ethernet header is. There is opaque data set by "ethernet-input" storing the offset of the current Ethernet header but, since this is opaque, it's not usable by downstream nodes. Previously several nodes have made assumptions regarding the location of the Ethernet header, including that it is always at the start of the packet buffer (incorrect when we have encapsulated packets) or that it is exactly sizeof(ethernet_header_t) away (incorrect when we have VLAN tags.) One notable case where this functionality is required is in ip6_neighbor when it generates a response to a received neighbor soliciation request; it reuses the incoming Ethernet header in-situ and thus needs to reliably know where that header begins. Also, at the suggestion of Dave Barach, this patch removes definition of HGSHM bits in the buffer flags since they are unused and unlikely to ever be. Change-Id: I00e4b9ced5ef814a776020c395d1774aba6185b3 Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-04-28Fix Bug VPP-22Florin Coras1-1/+1
Change-Id: Iaac12e63e4a5ee026276638afd5d5ba3b9503a40 Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-04-27Increase the trace bufffer sizeChris Luke2-2/+2
In some cases, the packet header size with IPv6 and a tunnel can overflow the buffer used for packet tracing. This patch increases this buffer a little to avoid truncated header information in the trace. Change-Id: Ib800e3b908ebe7e80bae4428a94541a803b40b8c Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-04-27Remove historical artifacts from vnet/buffer.hDave Barach1-26/+0
Change-Id: I7f50074a4ed5b62bef4584190eb849d90e90e592 Signed-off-by: Dave Barach <dave@barachs.net>
2016-04-27VPP-18: Creating tap interface through API broken. Fixed and removed ↵Ole Troan1-138/+50
duplicate code by CLI to create TAPs. Change-Id: Ib6b30e3dc20ddad7c78d2038955df7af020f0671 Signed-off-by: Ole Troan <ot@cisco.com>
2016-04-27Fix pcap trace capture crash for packets > 512 bytesJohn Lo1-1/+2
Change-Id: I9397ac756290953a14e3adfe5b7c980ecf92bac2 Signed-off-by: John Lo <loj@cisco.com>
2016-04-27Live VM migration support for vhost-userShesha Sreenivasamurthy2-4/+63
Change-Id: I79bef6dc94b3ad688564a409d14d63ca3125a305 Signed-off-by: Shesha Sreenivasamurthy <shesha@cisco.com>
2016-04-26Make automake silent rules defaultDamjan Marion1-1/+1
Change-Id: Ia504ccdac1deac20f20cf7fb76f78b2d8c505474 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-26MTU: set interface mtu tapMohsin Kazmi5-33/+57
This patch introduces standard command line 'set interface mtu' for setting the MTU for tap devices. It allows user to set the mtu in between 68 to 65535 bytes aligned to what linux kernel supports for tun/tap devices. Right now tapcli set the same MTU size for each tap interface. But it should be set and configure to per interface rather than per tap instance. Change-Id: I81b7f3ad95ca56d585907ff8f51d9935a428e01b Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2016-04-26Fix compile errors reported by clangDamjan Marion9-10/+10
For using clang as a compiler it is enough to specify CC=clang in the make command line Change-Id: I06f1c1d418b68768f8119de5bdc8748c51f90c02 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-26Port glean neighbor entry support to IPv6Pierre Pfister11-73/+342
This patch is more or less a port of I71f3ba0c8192 to IPv6. In practice it allows creating a route via a neighbor which is not resolved yet. It also adds static flag to IPv6 neighbor entries. And as Damjan suggested, it formalizes ip46_address_t by using the IPv4 embedded IPv6 address format. Change-Id: Ifa7328a03380ea4ff118b7ca4897b4ab23a3e57c Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2016-04-26Fix decap's second-loop failure issue within nsh-vxlan-gpeHongjun Ni1-3/+3
Change-Id: I7c5c93b6490baa05b9b203b6d065d9c31f36d531 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2016-04-25Put back VMXNET3 driver init for DPDK 2.2.0 or older versionsJohn Lo1-0/+19
Change-Id: I3fb9441fb7272072aba9721ca729d6ce5f2c00af Signed-off-by: John Lo <loj@cisco.com>
2016-04-25Disable TSO/CSUM offloadingShesha Sreenivasamurthy1-0/+15
Enabling these features breaks L4 traffic when a VHOST interface is bridged with a hardware interface which does not support such offloading. (Eg: enic) Change-Id: Ife3d292a8860eb60b82f1473e2d0dd7329e51d5e Signed-off-by: Shesha Sreenivasamurthy <shesha@cisco.com>
2016-04-25Fix vpp crash in DBG modeShesha Sreenivasamurthy1-1/+2
virtio-vhost driver was specifying wrong prefetch size. This caused VPP to assert in DBG mode. Change-Id: Icbe3d5574bd2463b98dfc618a001b16198ab82be Signed-off-by: Shesha Sreenivasamurthy <shesha@cisco.com>
2016-04-25Add native NETMAP driverDamjan Marion10-5/+1666
This is first drop of native NETMAP driver. It is mainly tested with NETMAP pipes but also support for native interfaces should work. New CLI: create netmap [<intf name>|valeXXX:YYY] [hw-addr <mac>] [pipe] [master|slave] Following example creates NETMAP pipe where VPP acts as master: create netmap name vale00:vpp1 pipe master then NETMAP pkt-gen tool can be used to send traffic: pkt-gen -i vale00:vpp1}0 -f tx Change-Id: Ie0ddaa5facc75285b78467420e8a9f9c8dfc39e5 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-25Add APIs to access dpdk informationTodd Foggoa (tfoggoa)2-0/+62
- Add an API to get the number of DPDK mbufs - Add an API to detemrine if the io thread has been released - Add an API to get the DPKD pmd type - Add an API to get the cpu socket of a device Change-Id: I926401891fb6053c676125c9d0621cc9ed1f80bb Signed-off-by: Todd Foggoa (tfoggoa) <tfoggoa@cisco.com>
2016-04-25Change ethernet's result within unformat_decap_nextHongjun Ni1-1/+1
Change-Id: Ib3f9d1a03930842063ebfbfcfeefca533a678416 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2016-04-25Convert lisp-gpe encap to interface tx nodeFlorin Coras9-531/+856
With this change, one lisp-gpe interface is created per vrf/overlay tenant and its tx node is used as encapsulator (or tunnel ingress). For all intents and purposes, the tx node inherits all functions previously performed by the lisp-gpe-encap node and it maintains said node's position in lisp-gpe's data-path graph. Chiefly, this opens the possibility to chain interface features, like IPSec, transparently with LISP. Furthermore, it brings basic data plane support for vrfs and LISP instance-ids (or virtual network instances as per RFC7364). Other changes include improvements to lisp-gpe enable and disable sequences and corresponding API/VAT fixes. Change-Id: I085500450660a976b587b1a720e282f6e728d580 Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-04-25Improve mechanism for using loopback interface as BVI for BDsJohn Lo6-78/+63
When loopback interface is configured as BVI, instead of changing its output node from loopN-output to l2-input, the loopN-output node is now kept while its next tx node is changed from ethernet-input to l2-input. The packet setup previously done in bvi_to_l2 as part of l2-input is now performed in the loop output node. This change adds an extra node in the BVI output path but provides the following improvements: 1. IP address/route created on loopback prior to it being configured as BVI will still work properly. The requirement to (re)configure IP/route on loopback after it is configured as BVI is removed. 2. The output stats for loopback interfaces are always provided irrespective of their BVI configuration. 3. The loopback-BVI output stats can be batch updated outside the packet loop in output node, instead of per packet update in l2-input node, making l2-input node more efficient for BVI packets. 4. Restore original node property as implemented in node.c function vlib_node_add_next_with_slot() where next node indices stored in next slots of each node will remain unique. 5. Packet trace for BVI output includes loopN output node which provides useful packet data. Change-Id: I7f5bc72ef953a367363a179088210596881f9e73 Signed-off-by: John Lo <loj@cisco.com>
2016-04-22Add clib_memcpy macro based on DPDK rte_memcpy implementationDamjan Marion94-455/+444
Change-Id: I22cb443c4bd0bf298abb6f06e8e4ca65a44a2854 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-22Fix duplicate freeDave Barach1-1/+2
Change-Id: Ifda07e476c74da9bfd7e21f02aa09160a0212e24 Signed-off-by: Dave Barach <dbarach@cisco.com>
2016-04-22Use memory from other CPU sockets if there is no localDamjan Marion1-0/+11
This fixes crash when local socket memory is not available so rx/tx queue setup fails. Here we simply retry operation without being so picky about memory location. Change-Id: I5bae47defe3c0fe120853378ed13141893284a5a Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-20Allow L3 forwarded jumbo packets on Bonded InterfacesJohn Lo1-16/+16
Set max L3 packet size allowed to the lowest value of the slave links. Also cleanup FIXME's for VMXNET3 driver. Change-Id: Ia5cf742f2ab13b8cdc8ea6286f56464ee4f8c51d Signed-off-by: John Lo <loj@cisco.com>
2016-04-20Python-API: Inital commit of Python bindings for the VPP API.Ole Troan1-0/+141
See: https://wiki.fd.io/view/VPP/Python_API Change-Id: If135fc32208c7031787e1935b399d930e0e1ea1f Signed-off-by: Ole Troan <ot@cisco.com>
2016-04-20delete loopback interface cliAlpesh S. Patel1-0/+6
(to be consistent with other delete interface commands) Change-Id: I41f63cc5b11d9fa9489edc54b17a4d857b711b66 Signed-off-by: Alpesh S. Patel <apatel9191@hotmail.com>
2016-04-20Cleaned up formatting in device.c - no functionality changes.Keith Burns (alagalah)1-64/+64
Change-Id: Ia7d83784d50b3651117201b876464528d015edea Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2016-04-20Change from nsh-encap to nsh-vxlan-gpe within nsh vxlan tunnel's short_helpHongjun Ni1-1/+1
Change-Id: Ifeba2e9857a112139b7be6436b59f05858f1abf9 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2016-04-20Move "ethernet" debug cli commands to "set interface"Damjan Marion4-127/+78
Following two commands are changed: ethernet mtu -> set interface mtu ethernet promiscuous -> set inteface promiscuous Change-Id: I5037e021933156c06044fb723a05ad330f8162b7 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-18Add API to get the dpdk interface stats delta.Sean Hope4-22/+85
Internally change the clearing and displaying of the dpdk stats to be based on deltas. Change-Id: I76605ac67492a374ff5522ff44d4a0190cf94e18 Signed-off-by: Todd Foggoa (tfoggoa) <tfoggoa@cisco.com>
2016-04-18Add support for AArch32Christophe Fontaine7-18/+18
gcc version 4.9.2 (Raspbian 4.9.2-10) Tested on Linux raspberrypi 4.4.6-v7+ #875 SMP Tue Apr 12 16:33:02 BST 2016 armv7l GNU/Linux CPUs may be little or big endian, detect with gcc flags, not the processor architecture Add a new flag $(PLATFORM)_uses_openssl which allows to disable the link with openssl lib. vlib/vlib/threads.c: startup.conf must: - specify the heapsize as we don't have hugepages on raspbian cpu { main-core 3 } heapsize 64M Corrects in various files the assumption uword == u64 and replaces 'u64' cast with 'pointer_to_uword' and 'uword_to_pointer' where appropriate. 256 CPUs may create an OOM when testing with small memory footprint ( heapsize 64M ), allows the number of VLIB_MAX_CPUS to be set in platforms/*.mk vppinfra/vppinfra/longjmp.S: ARM - copy r1 (1st parameter of the setjmp call) to r0 (return value) vppinfra/vppinfra/time.h: On ARMv7 in AArch32 mode, we can access to a 64bit register to retreive the cycles count. gcc on rpi only declare ARM_ARCH 6. Override this info, and check if it is possible to use 'mrrc'. /!\ the time function will NOT work without allowing the user mode access to the PMU. You may download the source of the kmod here: https://github.com/christophefontaine/arm_rdtsc Change-Id: I8142606436d9671a184133b935398427f08a8bd2 Signed-off-by: Christophe Fontaine <christophe.fontaine@qosmos.com>
2016-04-17dpdk socket-mem handling optimizationsDamjan Marion2-67/+81
- introduces default socket-mem size of 512 MB per socket - default socket-mem value is applied to all discovered CPU sockets - fixes bug when < 1024 socket-mem parameter is specified - for socket-mem < 1024 code prefers 2 MB pages - improves handling of manualy specified socket-mem values Change-Id: I9ef848108d7dd1228fbd82a5be49eb5277a93683 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-16Using classifier/ACL from now on. Changes pertaining to that.rangan1-21/+52
Change-Id: I682b9a361c7308d6d0abb9d7d0320215f0d91e50 Signed-off-by: rangan <rangan@cisco.com>
2016-04-15af_packet: clear bitmap entries when processing inputPeter Lei1-0/+1
Need to clear the bitmap entry when processing each input file descriptor. This becomes an issue on interface deletion. A crash occurs due to assertion in a debug image https://gerrit.fd.io/r/#/c/615/ - removed the code when this was set again, but the bitmap needs to be cleared Change-Id: I7cccb9bf8b9b2eb5a7f60ecda7530784a9512116 Signed-off-by: Peter Lei <peterlei@cisco.com>
2016-04-15Took care of code review comments. Extended the fix to other files.rangan2-0/+4
Change-Id: I24e688884cd5896b317efb53e1d193f7d363715a Signed-off-by: rangan <rangan@cisco.com>
2016-04-15Add LISP APIAndrej Kozemcak4-18/+240
SET API: lisp_add_del_locator_set lisp_add_del_locator lisp_add_del_local_eid lisp_gpe_add_del_fwd_entry lisp_add_del_map_resolver lisp_gpe_add_del_iface SHOW API: lisp_locator_set_dump lisp_local_eid_table_dump lisp_gpe_tunnel_dump lisp_map_resolver_dump Change-Id: Ie7f521e7e64ad2736b8417852b38454bfdef3728 Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
2016-04-14Rework of DPDK PCI device uio driver binding processDamjan Marion1-301/+57
This is complete rework of DPDK PCI initialization. It drops previous scheme where lspci/route/awk/sed are used and instead sysfs is solely used for discovering Ethernet PCI devices. Criteria for blacklisting device is changed from exsiting routing table entry to simple interface state obtained by SIOCGIFFLAGS ioctl(). It checks for IFF_UP flag, so as long as interface is declared up and even when carrier is down interface will be blacklisted. Change-Id: I59961ddcf1c19c728934e7fe746f343983741bf1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-14Init rte_mbuf length fields in af_packet driverDamjan Marion1-0/+5
Change-Id: I30cdad9585c1457c0d8ceecb3e5110ad40740021 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-14Change ARP and IP6-ND nodes to use interface-output node for outputJohn Lo5-89/+24
The current mechanism for setting up arp-input and ip6-discover-neighbor output nodes for interfaces using their interface link up/down callback function is inefficient and has potential timing issue, as observed for bonded interface. Now both nodes will setup output interface sw_if_index in the the sw_if_index[VLIB_TX] field of current packet buffer and then use the interface-ouput node to tx the packet. One side effect is that vlib_node_add_next_with_slot() needs to be modified to allow the same output node-id to be put at the specified slot, even if another slot contain that same node-id already exist. This requirement is caused by BVI support where all loopback interfaces set up as BVIs will have the same output node-id being l2-input while, for output-interface node, the output slot must match the hw_if_index of the interface. Change-Id: I18bd1d4fe9bea047018796f7b8a4d4c20ee31d6e Signed-off-by: John Lo <loj@cisco.com>
2016-04-14Move autogenerated vnet files to config folderFlorin Coras1-0/+2
This cleans up vnet folder however it doesn't clean the existing autogenerated files. I'm not aware of any automated solution to achieve this without involving git. Change-Id: Ib29869e08e1d3bd87b7b54bc414f88bd9c632372 Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-04-14Opaque index is not populated when ACL is configured. Fixed it.rangan1-1/+6
This is inline with ip6_classify.c Change-Id: Ib6e1f6fa3e4669e0a94e4ae2da48eacb240d192b Signed-off-by: rangan <rangan@cisco.com>
2016-04-13VHOST counters reversedShesha Sreenivasamurthy2-7/+10
VHOST counters are reversed. RX packet count are shown as TX and vise-versa in "show hardware" statistics. Change-Id: Ie1d41f1f0845edf495cdf34ca65466fc307940c6 Signed-off-by: Shesha Sreenivasamurthy <shesha@cisco.com>
2016-04-13Create macro for next_nodes used in lookup family of nodesDamjan Marion6-168/+44
This should help when adding new adjacency types Change-Id: I1832c6b7a80b6bc69ed83423a60511b7932f336f Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-12Creating a new CLI to create loopback interfaces to make the interfaceAlpesh Patel1-0/+6
creation cli consistent Change-Id: I72f074bb8c771511cb5203af6905adccefbb4197 Signed-off-by: Alpesh Patel <apatel9191@hotmail.com>
2016-04-12IP6 FIB: Micro optimization in lookupPierre Pfister1-4/+9
The mask is increasingly small. This saves a few cycles and becomes significant when there are many prefix lengths. Change-Id: Ibd0c9331f675697bb4e90e8ad617994f83edec9c Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2016-04-12Add unit test infrastructure for LISP protocolFilip Tehlar11-36/+644
Change-Id: I802700ad832de1dc6f4a1981e8985aa6e926c8ad Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-04-11Add a counter for unknown IPv6 hop-by-hop options.Yoann Desmouceaux1-2/+9
Change-Id: I3db82b71ae5e32e0f2230662497a05e57ddb6755 Signed-off-by: Yoann Desmouceaux <ydesmouc@cisco.com>