summaryrefslogtreecommitdiffstats
path: root/vnet
AgeCommit message (Collapse)AuthorFilesLines
2016-07-01VPP-171: fix a set of hw interface recycling bugsDave Barach3-1/+27
Change-Id: I735292bb2176742acab2295f90956c57e6f7ec1c Signed-off-by: Dave Barach <dave@barachs.net>
2016-06-30VPP-163 "show ip6 interface" ignores many addressesChris Luke2-24/+61
The output of the CLI command "show ip6 interface" shows only the first link-local address and any globally-scoped addresses. It ignores all other valid address scopes. This patch reworks that routine to cover the three main address scopes ("link-local", "global" and "local") and anything else it finds is grouped under "other"). Rationale for this final grouping is that these other addresses fall under ranges currently either "reserved" or "multicast" in scope. Whilst it's good to show if these are present, they are not normally found as link addresses. DBGvpp# sh ip6 int tap-0 tap-0 is admin down Link-local address(es): fe80::e857:7fff:fe77:c1a9/64 Local unicast address(es): fd50:7389:246b:4321::2/64 Joined group address(es): ff02::1 ff02::2 ff02::16 ff02::1:ff77:c1a9 ff02::1:ff00:2 ... Change-Id: I1d750b3b39c54aa4eb75632d53089640601bcba5 Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-06-30Fix buffer leak from L2 flooding replication processPierre Pfister1-0/+1
vlib_buffer_free_inline actually checks (b->flags & VLIB_BUFFER_RECYCLE) in order to decide whether to free the packet or not. Although the flag was correctly set in replication_prep, it is not removed by replication_recycle during last iteration. This patch just removes VLIB_BUFFER_RECYCLE when is_last is set. Change-Id: I2445ebce908d94d95535e706b40407b4f15906e4 Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2016-06-30Fix clang buildDamjan Marion2-5/+5
Change-Id: I678d7e0a7c91c7daf9feb3ec23a633b96fab56a7 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-06-29Fix the spelling of the word "suppress".Chris Luke2-11/+13
The spelling mistake where "suppress" is written as "surpress" was sufficiently common and annoyed me enough to fix it. For backwards compatibility, the CLI and API test tool both still accept the erroneous spelling. Change-Id: I82104ae9d8c2c9d6e3396ba0d72cb1dc133081d1 Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-06-29Add support for ethernet address in LISP APIFilip Tehlar1-1/+2
Change-Id: I9f1522f55bdd11602784a421fd850b839a1070e6 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-06-29Don't re-write adjacency with same information.Keith Burns (alagalah)1-9/+17
This will cause FIB counters to appear to be reset. This is an implementation of a patch from Dave Barach. Change-Id: I19b9953d42dfb92ec22af6a855e2e519ae7c3bdc Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2016-06-29Decouple worker thread code from dpdk, enable worker threads in vpp_liteDamjan Marion7-600/+9
Change-Id: I28616f1a89f2da95484438ec1a1db64845f15ef6 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-06-29VPP-158: VPP crashes in IKEv2 code when running multithreadedMatthew Smith6-148/+222
Change tunnel interface creation to be done from the main thread instead of a worker thread by calling vl_api_rpc_call_main_thread. Make per-thread copies of volatile elements in ikev2_main. Change-Id: I4cda8aaa392a04c2aea2d50a52a07933cf40c016 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2016-06-28VPP-48 Fixes for ip4/6 ttl checks and icmp responsesChris Luke6-72/+244
This patch fixes a few minor things: - Previously ip[46]_input was rejecting packets with an input TTL (hop limit) of one; this was not correct behavior. Packets that are bound for this device can validly have a TTL of one. - ip[46]_forward was not generating an ICMP TTL expired message if the act of decrementing the TTL caused it to become zero. This was not previously an issue because ip[46]_input was filtering packets where this could happen. - udp_local was not generating ICMP Port Unreachable messages if UDP packets arrived for a port that is not listened to. This is typically the signal that "traceroute" uses to terminate its search. Together these fixes mean that traceroute probes transiting a VPP node, or are targetted toward a VPP node, now work as expected. Change-Id: I84bb940883f7a18435f29f4518fb0445b989a3e3 Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-06-28Fix native build on non x86_64 systemsDamjan Marion1-0/+2
Change-Id: Iab9f6793112f19a5b54a555623d84099aa8bb03e Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-06-28Reduce ring size for dpdk NICs and overtal mem footprintDamjan Marion3-7/+7
Size of interface descriptor rings have direct impact on Last Level Cache utilization, and can significantly affect performance. So generally having smaller ring size is good idea as long as there is enough buffer in the ring to accomodate line rate. Here we are reducing rings sizes to 1024 which is still bigger than lab verified 512 buffers per ring. Indirectly, this also affects memory footprint, as we can have smaller buffer allocation, which is now 16384 (previously it was 32768) This patch also fixes issue with i40e vector PMD which was leaking buffers when previous default ring sizes were set. Change-Id: I58fb40586304b2f0cb5de9a444055da3cd3acb53 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-06-27VPP-108 : API calls to read classify table and sessionsPavel Kotucek1-1/+2
Added new API calls to read - classify table ids as array - classify table ids for specified interface - classsify table info and to dump sessions of specified classify table. Change-Id: I089604fa98eea92866495089d76c2330ae7d850c Signed-off-by: Pavel Kotucek <pavel.kotucek@pantheon.tech>
2016-06-27Add MAC address support to LISP map-cacheFilip Tehlar5-17/+131
Change-Id: I80f05a222cb0f728ad2460efe33955e781b6849f Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-06-26Misc. janitorial work:Dave Barach5-25/+19
Remove private / name-colliding "give me the first ip address on an interface" routine from proxy_node.c Return a proper error from ip4_lookup_init / ip6_lookup_init. Change-Id: Idd3c574424ba2ea77c263af16b02cd4ad0cb4605 Signed-off-by: Dave Barach <dave@barachs.net>
2016-06-25Netmap: Resolve interface state issueMohsin KAZMI1-3/+0
[VPP-155]: There is inconsistency in the netmap interface state for software interface state and hardware interface state. This patch resolves that issue. Change-Id: I92199e117f919bd985670366a6d3b7753e40659c Signed-off-by: Mohsin KAZMI <sykazmi@cisco.com>
2016-06-25vhost-dpdk: dequeue size fixZhihong Wang1-4/+12
Burst size for DPDK is 32, which is different from VLIB_FRAME_SIZE. A loop is needed to dequeue all packets. Change-Id: Ie611c58c4e3434251a47fe6ad1f38abcb85180cb Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
2016-06-25add buf_physaddr to dpdk traceGeorgii Tkachuk1-2/+2
Change-Id: Icbb6814306f51873af6ad9d1425b52d660bb99ce Signed-off-by: Georgii Tkachuk <georgii.tkachuk@intel.com>
2016-06-24netmap: multithreading supportMohsin KAZMI4-16/+70
This patch adds multithreading support for netmap interfaces. Change-Id: Iba94386fe309a4aac71646fe567f8dabbebd0459 Signed-off-by: Mohsin KAZMI <sykazmi@cisco.com>
2016-06-24Move vcgn as pluginShesha Sreenivasamurthy69-36506/+1
Use appropriate libnames to copy Change-Id: Iaa1e7e3ceed52f328e26e75ee7309fc6464d5c66 Signed-off-by: Shesha Sreenivasamurthy <shesha@cisco.com>
2016-06-24Reformat output of lisp eid-table show command.Filip Tehlar3-11/+66
Example output: DBGvpp# sh lisp eid EID type locators [100] 6.0.2.0/24 local(ls1) host-intervpp1 [200] 6.0.2.0/24 local(ls2) host-intervpp1 [100] 6.0.4.0/24 remote 6.0.3.2 [200] 6.0.99.0/24 local(ls3) local0 host-intervpp1 [0] 6.0.0.0/16 remote Change-Id: I69200bf7636167bce931def88828503a75496f4b Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-06-24Add admin-up flag to L2TP tunnels and start tunnels set to downPierre Pfister4-6/+42
L2TP tunnels use virtual interfaces but directly send packets to l2-input node (not ethernet-input). This node requires a bridge-domain to be associated with the interface. Past code was immediatly turning the interface up, but some packets could be sent to l2-input without bridge domain between interface creation and association with a bridge domain. The tunnel is now created as down and has to be set up later (typically after being associated with a bridge-domain). Another option would have been to change the api and enforce a bridge-domain to be specified before the tunnel, but this is less flexible for the user. Change-Id: I26d1f36bb4f327d9fa1c8044023f2210c4117904 Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2016-06-23Show command support for ip feature pathsDave Barach5-3/+147
"show ip features" displays all available features, in execution order. "show ip interface features <intfc>" displays all features currently configures on an interface, in execution order. Change-Id: I489bbdb85799a01721ba60b12ffaffcab1e0d1df Signed-off-by: Dave Barach <dave@barachs.net>
2016-06-23Use lisp_gpeX iface counters to store decap statsFlorin Coras4-36/+71
The patch switches to using LISP interface counters for storing the number of decapsulated packets instead of using per decap node stats. It also removes the encap node (iface tx node) stats since the iface output node already keeps track of the number of encapsulated packets. Change-Id: I636702a824264c173792f2f0c7fec0b0f4c6a9f7 Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-06-23VPP-72 Added api call aquivalents to:marek zavodsky2-11/+20
"show mpls fib" -> "mpls_fib_encap_dump" and "mpls_fib_decap_dump" "show mpls tunnel" -> "mpls_eth_tunnel_dump [tunnel-index <tunnel-id>]" and "mpls_gre_tunnel_dump [tunnel-index <tunnel-id>]" Change-Id: I59699039392f06dc61f62a015d07186a91cfaf45 Signed-off-by: marek zavodsky <mazavods@gmail.com>
2016-06-23LISP EID virtualization supportFilip Tehlar8-176/+298
Change-Id: I892c001cfdff9d8d93e646641d96520beb3c6265 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-06-23More LISP SD FIB and forwarding fixesFlorin Coras3-62/+56
o) Avoid using explicit_fib_index in the dst (main) FIBs. It's used in the IP6 lookup o) use if_address_index instead of rewrite_header.node_index to store tunnel indexes. This ensures the tunnel index is used in the signature computation and thus avoids all complications/hacks needed to make src adjacencies unique. o) Fixed negative fwd entry route insertion Change-Id: Ie56356f165b96dfa929da5672a3a429996366460 Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-06-22ARP/NDP does not send solicitation when no source address is availablePierre Pfister6-7/+28
Currently, when the interface has no address assigned to it, VPP crashes as ip_interface_address_for_packet assumes there always is at least one address. This patch checks if an address is available at all. The only part of VPP using it is ARP or NDP. When a neighbor discovery message has to be sent while there is no address assigned on the interace, no solicitation is sent and an error counter is incremented. Change-Id: Ia9fdaf8e84050a1ceeb47f5370819d3df95714f0 Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2016-06-22Add MAC address support for LISPFilip Tehlar3-18/+166
Change-Id: I79e3915fa61b497e6b586babcdf093937af07b2b Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-06-22CLI to update locator-setAndrej Kozemcak1-6/+83
Change-Id: I60ea36362a2c4b7c936dde501a3d737b68a8c9ff Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
2016-06-22Fix for build failure due to iOAM plugin header file pathShwetha1-0/+1
Change-Id: Ie5d270a01e3ca0687a407aeebc42aacc53a01ddc Signed-off-by: Shwetha <shwethab@cisco.com>
2016-06-21Check if LISP is enableAndrej Kozemcak5-13/+104
Lisp enable flag is enforced. DP API should not be call if the dp is disable. Change-Id: I265cf3ea0460987f3fd5fd84b43127dd3b1c43c3 Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
2016-06-20VPP-143: Correctly drop local l2tp packets when no session is foundPierre Pfister3-14/+48
When receiving a local ipv6 packet containing an l2tp packet not associated with any session, l2tp node was handling the packet as if provided by an ipv6 feature, hence crashing. This patch fixes the issue by correctly dropping the packet instead. This patch also fixes a typo from commit d65346098daf896. Change-Id: I1b377fc5685568c16831920227671feffac64287 Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2016-06-19Output interface MTU check ignored in double-loopChris Luke1-8/+9
In the double loop of ip4-rewrite, when forwarding packets, the outbound interface MTU check occurs too late in the double-loop to be actioned. Change-Id: Ifc44e65d6ddb832aa0161d0685b1a28378541905 Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-06-19Fix use of lookup_next_index in LISP src/dst FIBFlorin Coras2-12/+79
Adjacencies in LISP src/dst FIB store the index of the LISP output interface (next node after lookup) in the lookup_next_index. Since the values of interface node indexes are not constrained, they can collide with the 'special' adjacencies IP_LOOKUP_NEXT_LOCAL and IP_LOOKUP_NEXT_DROP. As a result, at allocation time, LISP ajacencies may be automatically shared with the previous two, predefined adjacencies and all LISP specific state stored in the rewrite area is lost. This fixes the problem by 'hijacking' the explicit_fib_index instead of the lookup_next_index field. Change-Id: I3c59121dcf0851decf5c08004143d1201dbd1ece Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-06-18Fix node registration in ixge driverDamjan Marion1-2/+1
Change-Id: Ia98ed873954feaa7bf1f13d8eb4054d0afba495e Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-06-18Give correct argument to ip_call_add_del_adjacency_callbacksPierre Pfister1-1/+1
ip_call_add_del_adjacency_callbacks requires an adjacency index, not a sw_if_index. Change-Id: I4ae6a6bbbe0abee4791217463d353c56f9735ba3 Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2016-06-18Move pkt replication counter to the opaque2 cache lineDave Barach9-20/+17
Change-Id: I5e6edfd03ab41949be2c768dfe68aa824bbc1f38 Signed-off-by: Dave Barach <dave@barachs.net>
2016-06-17Dynamically compute ip feature subgraph orderDave Barach19-135/+530
This change-set enables plugins to add themselves to the ip4/ip6 feature subgraphs without having to modify core vpp engine code at all. Add VNET_IP4/IP6_UNICAST/MULTICAST_FEATURE_INIT macros which express the required ordering constraints, and off you go. Along the way, added an implementation of Warshall's algorithm to vppinfra; to compute the positive transitive closure of a relation. In this case, the relation is "feature A runs before feature B." With that in hand, ip_feature_init_cast(...) computes a partial order across the set of configured feature subgraph nodes. In unit-testing, we discovered VPP-145 - ip4/6 inacl wiped out vnet_buffer(b)->ip>current_config_index, which exists in main. So, we fixed that by moving b->trace_index, adding b->current_config_index, and removing the ip opaque union current_config_index. Change-Id: Iff132116f66413dc6b31ac3377198c7a32d51f48 Signed-off-by: Dave Barach <dave@barachs.net>
2016-06-17Support NAT across multiple interface pairsShesha Sreenivasamurthy2-57/+140
Some of the commands require interface name as an additional parameter as we support multiple interfaces. Example: set vcgn map inside TenGigabitEthernete/0/0 10.1.0.1 - 10.1.0.1 show vcgn inside-translation protocol tcp interface TenGigabitEthernete/0/0 inside-addr 1.0.0.2 show vcgn outside-translation protocol tcp interface TenGigabitEthernet9/0/0 outside-addr 10.1.0.1 Change-Id: Id691ccd3f2c863c665a1568982c819b79dda007e Signed-off-by: Shesha Sreenivasamurthy <shesha@cisco.com>
2016-06-17VPP-76:APIs for Proof of transit feature added to iOAMShwetha7-1120/+125
Moved Proof of Transit utility as a plugin Moved Proof of Transit option as a plugin Change-Id: Idc9897205eb8ec80c5dea47b428e6209ac938c32 Signed-off-by: Shwetha <shwethab@cisco.com>
2016-06-17New LISP API map-request itr-rlocAndrej Kozemcak2-1/+141
API to constrain source locator when sending map-requests. lisp map-request itr-rloc <locator-set name> Change-Id: I19f3a1aa8a387ca8662ccf3a4ad774ea7d655f80 Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
2016-06-17VNET: Initialization support for NXP DPAA2 poll mode driverSachin3-1/+13
- NXP proposed a poll mode driver "rte_dpaa2_dpni" in DPDK upstream. - When using external DPDK with the given dpaa2 driver, VPP needs modification to initialize the PMD and to understand the DPAA2 N/W interfaces. Change-Id: I00eb127fa88c71fb430d3def238d50ba68fd595f Signed-off-by: Sachin <sachin.saxena@nxp.com>
2016-06-17Consolidate use of IP fib functions in LISP CPFlorin Coras1-143/+108
Clean up, refactor and consolidate LISP CP functions that interact with ip interfaces and fibs. Change-Id: I214eaebbec8d43646118df0948d0f82f923a5b43 Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-06-156rd: Move to pluginOle Troan7-763/+1
- Change toplevel plugins make target. Now builds all plugins under plugins/. (Apart from sample-plugin). - Move sixrd code to plugins directory and make necessary changes to make it a plugin - Remove 6rd hooks from IP lookup code Change-Id: I447e92e3bee240cd8de01d0abac2e1708e8c27d1 Signed-off-by: Ole Troan <ot@cisco.com>
2016-06-16VPP-19: Split the lookup.h IP_LOOKUP_NEXT enum.Ole Troan11-339/+50
IP4 and IP6 nodes currently shares the adj->lookup_next_index. That has some issues, e.g. that one has to add non-functional nodes like ip4-hop-by-hop and that anyone dynamically adding nodes to any of the IP4/IP6 lookup nodes must ensure they add themselves to all relevant nodes to ensure next index consistency. This patch splits the IP_LOOKUP_NEXT into separate enums for IP4 and IP6 with a common part for next-nodes used by both. It sets up other IP nodes as siblings to avoid inconsistencies. This allows IP4 and IP6 lookup next nodes to evolve independently. The adj->lookup_next_index is still shared, assuming that an IP4 adjacency isn't used by an IP6 graph node. Change-Id: I589b8364fe54e7a10c059b7ef9d6707eb0a345cc Signed-off-by: Ole Troan <ot@cisco.com>
2016-06-16Fix hugepage leak on VM terminationShesha Sreenivasamurthy2-0/+36
When VM is terminated, the hugepages mapped should be unmapped so that the system does not run out of hugepage resources. Therefore, mapped pages are unmapped when VPP notices a disconnect. Change-Id: I7398fb20028036738ab87db0b0e79609e95d69a4 Signed-off-by: Shesha Sreenivasamurthy <shesha@cisco.com>
2016-06-16Fix vxlan-gpe interface state dump failureHongjun Ni1-0/+4
Correspond to HONEYCOMB-84 VxLAN GPE - Wrong operational data. Change-Id: Ia1b3c3b85e4b5435b0c690a4ce9ff93c65bfee5c Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2016-06-15README file for vcgnRanganathan T.S1-0/+100
Change-Id: I6bd851e4b26f0b8d6f5826a19bded3af930cbc0e Signed-off-by: Ranganathan T.S <rangan@cisco.com>
2016-06-15Delete useless field decap_next in tunnelHongjun Ni2-37/+5
Field decap_next in vxlan-gpe tunnel is not needed. Change-Id: I83cc42ca82274587a57e3c65711cf18ee8d692d3 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>