Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I709e7cf0bb52d8e6cdc9ddb3b7648660204aa3bd
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I34c527ba910fb282a95458b78d1d684eb337905e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I024b8d79cced45cf53a7a912319eca2cc932b10e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I9c76b6d7ffebeeb92d5eeca5852c487d73151f28
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Optimize VXLAN encap node so that vxlan4-encap node is used for IP4
and vxlan6-encap node is used for IP6 underlay. Also stack the VXLAN
encap nodes to the appropriate FIB IP4 or IP6 load-balance node
instead of ip4/ip6-lookup node to save IP lookup operation.
For VXLAN decap node, check VXLAN header FLAGS field for each packet
and remove the code to support decap-next for IP4 or IP6. These decap-
next values were intended for experimentation purposes and not needed
any more since VXLAN-GPE tunnel is supported. The decap-next field is
still kept in API for backward compatibility and its value has no
effect. Decap next for both vxlan4-decap and vxlan6-decap nodes is
always l2-input node.
Change-Id: I8ac95774946549ec403ab691f999df0c006b460f
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: Ief769c966888094944b7a6b7f26527e7eff6103f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
An issue is that the server->server_fib_index is overwritten by
some incorrect value on subsequent calls to the function - e.g.
when setting DHCP proxy for the same FIB table several times.
Change-Id: I2e129b47f5c8fe3a0b924a7d71bb83e6fc53e9b5
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
Change-Id: I0379844824b4c2eb42588d0fb8e1a7eb441e923f
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
device-input feature arc requires that all input-nodes have
nexts in sync. packet-generator tends to call vlib_node_add_next
when new stream is created and that puts nexts out of sync.
With this change all input node are siblings of device-input
node so call to vlib_node_add_next(...) will install same next
to the whole family.
Change-Id: I33d79492e5f30f348af19e527f36fe0222c524d7
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ib821e52dac7cd7ee24e6e495916689e23e8b699a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I38e476c8080faa5a8647ce6be5a71090e0aa8d5b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I5f5251ed6b2a39d5e83dd7c702079245ef5f32b0
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Packet tracing for packets sent or received on vhost interfaces
now includes:
- virtio header information
- virtio queue transmit mode (chained, indirect, etc...)
Should be *really* helpful for dealing with the many existing
qemu/driver versions/implementations.
Change-Id: Id0a5d1d671d8b9d3e05691fe13def991b30ee105
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
|
|
New Debug CLI:
packet-generator new {
worker X
}
Change-Id: I71499733a29b49cd36d753d54846d2553af6d024
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
The tuntap punt/inject should be enabled for IPv4/6 RX once any vpp
interface has an IP address.
Change-Id: I4a507b7540b7464ed6d21035ac9b8f9463028c6f
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
From logical point, if first packet is ipv4, and second packet is ipv6.
When first packet failed, the procedure will skip key6_1 setting.
This will lead to second packet's failure.
But here the graph node only process either ipv4 or ipv6 packets completely.
So it is not an issue here.
This patch only make the packet processig's logic clear. It is just a cosmetic change.
Change-Id: I0104ebf2546208d9068000649ce6dccdeeb5aa79
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Change-Id: Ice97940a27c9f4d983d9199d59719d953520fcdb
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Iccae655334b6219d22c325108b0e7f37d1dd68cf
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I62deaaa47a9259c886efa702eb4279c1c481585f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Previos implementation imposed a limit that node can be member of
only one feature arc as feature arc index was stored in node runtime.
Now start node stores index into vlib_buffer_t and feature
nodes are taking it from there.
Change-Id: I252841083bc292af7ed36bf1ac652f2b8c16bfb8
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fixes DHCPv6 relay reply message corruption.
Change-Id: Iead995f29d2fa9cbb04f0f9d42b3aa9002267117
Signed-off-by: Wojciech Dec <wdec@cisco.com>
|
|
This patch adds multi-queue support to non-dpdk's vhost-user
driver.
Waiting for a unified way to manage threads, this patch
defines a way to assign threads to interfaces that is
specific to vhost.
Change-Id: I86298788b1a4e886c5431f187dc17175d12c7a8b
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
|
|
It works with and without DPDK so it allws us to enable
lawful-intercept code in vpp_lite images.
Change-Id: I08f234cbc652c3ff47a6123a43b9e7f8bdcd5534
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Icd29c9013ae70f5444eb940aff4f08589e755f48
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Properly initialize allocated buffers
Change-Id: Ib2005e605c89a164a4856790db6968fcd7520f5c
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
- Added support in classifier session to identify a flow to be iOAM6 encap/decap
- Sequence number as part of iOAM6 E2E header is created as a plugin.
Change-Id: Ib7605de45aecff25d684d099b525f8dc96ee7038
Signed-off-by: AkshayaNadahalli <anadahal@cisco.com>
|
|
Removed by accident.
Change-Id: Ifebbe99eb2825cb6ee7d33d55cf3c087a9817f72
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ie4c820933114af2269c99531856c45b0271a4a3e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I3e02588e8c05ec50eacbe7c10cd5ac185daad43b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This patch allows for empty dpdk device configuration
such as: dpdk { dev 0000:0a:00.0 { } }
Instead of exiting.
Change-Id: If9488eecc7fb1e0b5c6626f9c074649b39b727d3
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
|
|
Change-Id: Ib5b5a15223ac9252e9cacd163bd870b009ec3b63
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: If884637a6db0cb813a40920194795da2e98c8b23
Signed-off-by: David Hotham <david.hotham@metaswitch.com>
|
|
Signed-off-by: Damjan Marion <damarion@cisco.com>
Change-Id: I010ecde93863dbdad84b993cd3680a5446db59b5
|
|
Change-Id: I07870122f90e41fbb216b2f426bccbfd94049cd6
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
1. Modifies ip6 hbh selective processing in lookup
only when non-recursive routes are present.
2. Adds ip6 hbh processing in load balance.
3. Cleanup of ip6 iOAM hbh plugin formatting and
CLI handling found while testing the changes.
4. Deleted wrong asserts in dual loop for add
and pop iOAM hbh nodes. The current data of the buffer
ip6 start and will not be 0
5. Deleted set ioam destination cli and associate functions.
iOAM add/pop is enabled via classifier, this cli is no longer
used.
Change-Id: I3aac71ad512762c0b2b602fe88fe0291b85d39c7
Signed-off-by: Shwetha <shwethab@cisco.com>
|
|
Add some 'make test' unit tests for MPLS explicit NULL label handling.
Fix the stacking of the MPLS load-balance result form the lookup onto the IPx lookup object.
Change-Id: I890d1221b8e3dea99bcc714ed9d0154a5f602c52
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Icc4e74ae1627c5b97746ed64955a3dc089e3998f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This node was not setting vnet_buffer (b0)->sw_if_index[VLIB_TX]
properly.
Change-Id: I3e9f095da5f79c4186e3988ef315a7045ac85708
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I0158a290736f68d0d56dff2f15dd18518059efd2
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
It will not be used for IP only...
Change-Id: I90ef3030aff7f9e24767553f019cabc1ea987126
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ia1042622c656861a80b856115aeb3c2e5cf5ea2a
Signed-off-by: David Hotham <david.hotham@metaswitch.com>
|
|
Change-Id: Ibeb6d35e15a8d332753df7c352c0b51c277a0ee5
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
The crash was the result of indexing off the end of the next[] array.
Removing that prefetch code completelly, as it is questionable
how much it helps so late in the game.
Change-Id: I7bc83483a1088437edb4ac0f95a54c39afce136b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fix a few places where the protocol of the DPO object was incorrectly set and hence the graph traversed by the packet jumped between ip4 and ip6 nodes.
Change-Id: I75c4ecfdf79df39f5dbb7c68f1fc82ff04aaed28
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: Ie4a0ba57d5c672ab04fe37801836f65d8731a90a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
On moving interface between L2 and L3 forwarding modes, adjust the
l2-output node next index for the sw_if_index of the interface so
packet output via stale MAC entries in L2 FIB will be dropped.
Change-Id: I25afd7a617edb4ae35ce296bac33e62683edad9a
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: Ifef27540f02f423070e8843951be5cba0acea8cf
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: Ia790aa018e70d67ed343e3e466d1b33b22560fc0
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I98b407f9b698307c5a0007b198a734674b33f925
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Works with:
http://dpdk.org/browse/dpdk/snapshot/dpdk-16.11-rc1.tar.xz
placed into dpdk/ or ~/Downloads
Change-Id: I17f6a721529dbefc796f555e2525d157b9bf8740
Signed-off-by: Damjan Marion <damarion@cisco.com>
|