Age | Commit message (Collapse) | Author | Files | Lines |
|
This introduces support for layer 2 overlays with LISP. Similarly to L3,
all tenant packets to be encapsulated are captured by an interface, but
the mapping (layer binding) instead of being between an L3 VRF and a
LISP VNI, it is between and an L2 bridge domain and a VNI. At a high
level, this results in two important properties:
1) the source and destinations of all packets flooded in the
bridge-domain are mapped via the LISP control plane and the replies are
converted into data-plane tunnels tracked via a LISP specific
source/dest L2 FIB
2) All packets reaching the interface and matching a source/dest L2 LISP
FIB entry are L3 (IP4/6) encapsulated.
This is solely a unicast feature, therefore at this time ARPs are not
handled in any special way.
Change-Id: I0b7badcd7c6d5166db07d4acd2cc4ae7fba3e18e
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- change output from eid table
- add eid filter:
all - dump all eid
local - dump local eid
remote - dump remote eid
Change-Id: Ifaaad8abf44cf70c4c22d05252e501456f1f1083
Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
|
|
Fix bug, can`t remove static remote mapping,
small update in LISP remote mapping API.
Change-Id: Ide32485a1a0d2cf08829d544500fa2755214b8cc
Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
|
|
Change the output format of lisp locator_set API.
Create new API for lisp locator.
Change lisp_enable_disable_status_dump -> show_lisp_status, not use dump
function.
Change-Id: Ie2024cbf5e55b22ba077266220bf8584d5cac07a
Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
|
|
Change-Id: I22df3d4407bd7fdd953783f00605380a2d6fb46e
Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
|
|
Change-Id: I34e19d1feb350c47987b9764b642ef9baa000581
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
JIRA: VPP-114
If the classifier finds a matching entry, it sends packet to the policer,
packet should be pre-colored for color-aware policers.
Change-Id: I10cb53b49907137769418f230df2cab577d0f3a0
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
PatchSet 3: use clib_memcpy for copy.
PatchSet 2: use clib_memcpy() to copy IP address.
PatchSet 1: Support IPv6 interface for GRE API.
Change-Id: I80ee4b61df15da7fd851b682a97d5d49f89568b7
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Added new API to:
- create packet generator interface
- enable packet generator per stream or all
- capture into file
Change-Id: I0e6c1f28069853e4b26f0dc9d282353b0b7f6512
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
VAT API:
- show_lisp_pitr
CLI API:
- show lisp pitr
Change-Id: Ibd31cb09efc34a49b439338e9467faf7a151f2cd
Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
|
|
vat# get_next_index node-name vxlan4-input next-node-name l2-input
next node index 1
Change-Id: Ib71be8a408d08d59b0ed7dfb6ada9711cf29bd69
Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
|
|
Change-Id: I14fb0378944db5bf7a8843b4dc361de748659ece
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I7a028ce9ddf21bd3a7d4991ba1be05e5e74202d6
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
JIRA: VPP-90
Policer allows you to specify the action to be taken on a packet:
conform-action (green color)
exceed-action (yellow color)
violate-action (red color)
Action to take on packets:
drop - drops the packet
transmit - transmits the packet, the packet is not altered
mark-and-transmit <DSCP> - sets the DSCP value and transmits the packet
Change-Id: I59c037e55e7e2a9fc9b9752e92426f3977f5587b
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I1df1cd3d2630baab979e840153f1f109d3ead0c2
Signed-off-by: Dave Barach <openvpp@barachs.net>
|
|
The API to add an adjacency requires that two things be provided 1) a
local and a remote eid 2) the whole remote mapping for the remote eid.
Since the API to add remote mappings can be used for 2), 1) in
combination with this API are enough to add an adjacency.
Change-Id: Ibe7474924bc3f28b6aed19cefa78fdb812de5eac
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Adds missing items to ip_neighbor_add_del help text
Change-Id: I1d74c7d31ec6d96f8de9bfb5bfc7872b9cbef682
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
Change-Id: Ifa9bcd9a9c5dbda00ff8096909ccbc822445b8cb
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: I32dcfb1c33f0b2324de1ebf08851e8b65793e4ea
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Indirect routes should always result in an indriect adjacency even when the route's next-hop is covered by a connceted, since the covering route may change and no tracking is in place.
Some de-duplication of code for installing indirect routes via the CLI and API.
Change-Id: I7a440ffba43ae3990b68cb407244c06bd0827534
Signed-off-by: Neale <nranns@cisco.com>
|
|
Change-Id: I3b65e85d24ed37b6889af7e194fee45ec61b15a8
Signed-off-by: marek zavodsky <mazavods@gmail.com>
|
|
Change-Id: Ie5e6751fd791e7ca728522632332abe442a1a75b
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
- avoid code duplication by using only one function for
insertion/updating of remote mappings into map-cache. Static remote
mappings are now inserted using this function as well and therefore
the code does not try to build forwarding entries out of them now.
- bring up lisp dp interfaces when a vni is bound to a vrf.
- ensure eids are cleaned-up before parsing control plane messages
- ensure map-requests are always sent to default fib
- new API to insert lisp adjacencies as opposed to remote mappings which
should be replaced post merged in CSIT
- reorganize and group functions according to their purpose and use. No
need to pre-declare internal functions now.
- this does not touch locator-set logic
Change-Id: Ibcfc0f2d9c1bc1c9eab6e83c1af1b4cf9302ac10
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Since format string "%d" expects a 32 bit value using u8 type in unformat()
results in buffer overflow.
Change-Id: Idee5b588049d7573ddbde56c28030f9db3758493
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
The spelling mistake where "suppress" is written as "surpress" was
sufficiently common and annoyed me enough to fix it.
For backwards compatibility, the CLI and API test tool both still accept
the erroneous spelling.
Change-Id: I82104ae9d8c2c9d6e3396ba0d72cb1dc133081d1
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
Change-Id: I9f1522f55bdd11602784a421fd850b839a1070e6
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Install vpp api header files in /usr/include/vpp-api, instead of
/usr/include/api. Someone will eventually complain if we continue with
the status quo.
Generate /usr/bin/vpp_plugin_configure, to correctly configure
standalone plugin compilation against header files installed from the
dev package.
If a plugin's CFLAGS don't precisely match the installed vpp engine
binary, subtle misbehavior can and will occur. Example: the ip4/ip6
main_t structure size / member offsets depend on DPDK=[0|1]. Screw
that one up, and your brand-new configurable ip feature will
mysteriously fail to appear, even though the plugin loads perfectly.
Change-Id: I20c97fe1042808a79935863209d995c31953b98c
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Added new API calls to read
- classify table ids as array
- classify table ids for specified interface
- classsify table info
and to dump sessions of specified classify table.
Change-Id: I089604fa98eea92866495089d76c2330ae7d850c
Signed-off-by: Pavel Kotucek <pavel.kotucek@pantheon.tech>
|
|
"show mpls fib" -> "mpls_fib_encap_dump" and "mpls_fib_decap_dump"
"show mpls tunnel" -> "mpls_eth_tunnel_dump [tunnel-index <tunnel-id>]" and
"mpls_gre_tunnel_dump [tunnel-index <tunnel-id>]"
Change-Id: I59699039392f06dc61f62a015d07186a91cfaf45
Signed-off-by: marek zavodsky <mazavods@gmail.com>
|
|
Change-Id: I892c001cfdff9d8d93e646641d96520beb3c6265
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
API to constrain source locator when sending map-requests.
lisp map-request itr-rloc <locator-set name>
Change-Id: I19f3a1aa8a387ca8662ccf3a4ad774ea7d655f80
Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
|
|
Change-Id: I4c2972b55d5d99f3aa7a05885791eef47351c734
Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
|
|
Patchset 2: rebuild
Change-Id: I3375d6c9c7e18ab46896552614369b9d77ee6004
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Change-Id: I3379517535a98a7a5fbd3173503f288a81378821
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I5cba5eae5a981e41df3f227834a079e10982537f
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: I5aef12d3a9c8daefff52e5f958c504f5d2ff9fd0
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: I4913fe6c4b1280939147887896aea9b79a9f7f10
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
The VXLAN add_del API sometimes rejects calls with
VNET_API_ERROR_SAME_SRC_DST when the two parameters are obviously
different. This is because the API code is checking the "is_ip6" flag in
a not-yet initialized area of memory leading to random results.
Also fix help text for vxlan_add_del_tunnel in vat.
This does not change the API; it repairs intermittent failure.
Change-Id: I41863694f478c1f669078f82f69d8cca4841c989
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
PatchSet4: consolidate code as per comments.
PatchSet3: simplify the code using ip_udp_encap_one/two
PatchSet2: consolidate comments and indent style
Change-Id: Ia8b43f854a46d77e838e198566200ad28fd72472
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Change-Id: I8a3770f8f1cd1fde6765b81d35aacaaf4ff98b82
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
if_name collides w/ ietf-interfaces.yang member name, causing a build-break
in an existing yang-model-based app. Rename to "netmap_if_name".
Change-Id: Id386eacd77343dd15a868c28dacd2b0e4523bc9b
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Tunnel dst is incorrectly being set to the requested src address.
Change-Id: I44e2ee475f0572e78d148951c5d4684e85e08ce7
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
JIRA: VPP-67
Change-Id: I8fced60a884f1585b1f51002832d47631eea9571
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
JIRA: VPP-66
Change-Id: I421529fa8eafe5268745a34a4fcd40156defcdf8
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
JIRA: VPP-67
Change-Id: I04560d78e2eb131cd6cc31472b70b3d3e8fdd79a
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: Ic4c717af9629541bac0a0e6c65d0157619c8f578
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
- removed vnet/vnet/nsh-gre
- removed all nsh from vnet/vnet/nsh_vxlan_gpe to
vnet/vnet/nsh
- moved vnet/vnet/nsh_vxlan_gpe to vnet/vnet/vxlan_gpe
- added cli and binary api for VXLAN GPE tunnels
- plan to move vnet/vnet/nsh to new repo (sfc_nsh) and make plugin
- added cli for NSH (binary API will be done in sfc_nsh)
- vnet/vnet/gre will be extended in VPP-54
Change-Id: I1d27def916532321577ccd68cb982ae0d0a07e6f
Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
|
|
- check input variables
- in locator_set dump, add support for remote locator_set
Change-Id: Ib10028e83fead358f820ae45c71b6ca4dfbe2f1e
Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
|
|
This patch adds an enable/disable API/CLI for control plane
which calls similar functions for data plane. When re-enabling
it also re-populates dataplane with tunnels and interfaces.
Change-Id: Id8c3d6af90ecc0be331d502756914b1f62824046
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: I39409ae9e75fdb59d8cbbd940fa192b24eb79b6a
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|