summaryrefslogtreecommitdiffstats
path: root/vpp-api-test/vat
AgeCommit message (Collapse)AuthorFilesLines
2016-05-07VPP-35 Add GRE tunnels to sw_interface_dumpChris Luke1-0/+6
GRE tunnels were missing from vpp_api_test's sw_interface_dump command. $ sudo ./build-root/install-vpp_debug-native/vpp-api-test/bin/vpp_api_test json vat# sw_interface_dump [ ... { "sw_if_index": 7, "sup_sw_if_index": 7, "l2_address_length": 0, "l2_address": [0, 0, 0, 0, 0, 0, 0, 0], "interface_name": "gre0", "admin_up_down": 1, "link_up_down": 0, "link_duplex": 0, "link_speed": 0, "mtu": 0, "sub_id": 0, "sub_dot1ad": 0, "sub_number_of_tags": 0, "sub_outer_vlan_id": 0, "sub_inner_vlan_id": 0, "sub_exact_match": 0, "sub_default": 0, "sub_outer_vlan_id_any": 0, "sub_inner_vlan_id_any": 0, "vtr_op": 0, "vtr_push_dot1q": 0, "vtr_tag1": 0, "vtr_tag2": 0 } ] Change-Id: I6f174f3c384eac464250b22f43b25be6a844aa66 Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-05-05ONE-2: Add new LISP dump API for lisp gpeAndrej Kozemcak1-2/+64
API: lisp_gpe_enable_disable_dump Change-Id: I1c8e78f00f9a3f99c1f2f54884af565292e4ccf8 Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
2016-05-05VPP-39 - refactoring of NSH into own folderKeith Burns (alagalah)1-6/+6
- common header files and structs used in both GRE and VXLAN-GPE Change-Id: I06d0b773e936fb011408817237059f24a4beb412 Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2016-04-30IP6 SR multicast replicatorKeith Burns (alagalah)1-2/+150
- adds ability to name tunnel - creates policy as a collection of tunnel names - map ip6 multicast address to policy and replicate packet - adds zero memcpy for invariant portion of packet Change-Id: Icd2fe6a2cf65c09906e82ed1afbb0eae8df79452 Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2016-04-29VPP-25 Add API for GRE tunnel create/delete/show.Chris Luke1-1/+163
Add API methods to create, delete and show GRE tunnels. Also add missing CLI functionality for deleting and listing configured tunnels. Change-Id: I7565966037d94ade07938e4ff0d9333419716857 Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-04-28VXLAN over IPv6.Chris Luke1-15/+64
Refactors the VXLAN node to work with both IPv4 and IPv6 transports. There is a discussion thread for this change at https://lists.fd.io/pipermail/vpp-dev/2016-March/000279.html Note that this changes the binary configuration API to support both address families; each address uses the same memory for either address type and a flag to indicate which is in use. This also includes changes to the Java API to support both address families. The CLI and VAT syntax remains unchanged; the code detects whether an IPv4 or an IPv6 address was given. Configuration examples: IPv4 CLI: create vxlan tunnel src 192.168.1.1 dst 192.168.1.2 vni 10 encap-vrf-id 0 decap-next l2 IPv6 CLI: create vxlan tunnel src 2620:124:9000::1 dst 2620:124:9000::2 vni 16 encap-vrf-id 0 decap-next l2 IPv4 VAT: vxlan_add_del_tunnel src 192.168.1.1 dst 192.168.1.2 vni 10 encap-vrf-id 0 decap-next l2 IPv6 VAT: vxlan_add_del_tunnel src 2620:124:9000::1 dst 2620:124:9000::2 vni 16 encap-vrf-id 0 decap-next l2 TODO: The encap path is not as optimal as it could be. Change-Id: I87be8bf0501e0c9cd7e401be4542bb599f1b6e47 Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-04-26Fix clang warnings in api codeDamjan Marion1-7/+7
Change-Id: I7a4bc4678fea723c35bbeac1b893c5c52235aa67 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-25Convert lisp-gpe encap to interface tx nodeFlorin Coras1-5/+52
With this change, one lisp-gpe interface is created per vrf/overlay tenant and its tx node is used as encapsulator (or tunnel ingress). For all intents and purposes, the tx node inherits all functions previously performed by the lisp-gpe-encap node and it maintains said node's position in lisp-gpe's data-path graph. Chiefly, this opens the possibility to chain interface features, like IPSec, transparently with LISP. Furthermore, it brings basic data plane support for vrfs and LISP instance-ids (or virtual network instances as per RFC7364). Other changes include improvements to lisp-gpe enable and disable sequences and corresponding API/VAT fixes. Change-Id: I085500450660a976b587b1a720e282f6e728d580 Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-04-22Add clib_memcpy macro based on DPDK rte_memcpy implementationDamjan Marion1-130/+130
Change-Id: I22cb443c4bd0bf298abb6f06e8e4ca65a44a2854 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-22Add a vpp_restart commandDave Barach1-0/+234
vpp_restart solves the problem of restarting vpp and not exiting until the new vpp instance is sufficiently established to allow immediate binary API connections. The point is to avoid using arbitrary "sleep N" commands e.g. in CSIT shell scripts. We send SIGTERM to the current vpp process, and expect / depend on the process-monitor du jour to remove the vpp-api shared-memory segment. vpp_restart exits w/ status 0 if all is well, non-zero upon failure. In trying to make vpp_restart reliable, we discovered a recently-introduced heap corruption bug in .../dpdk/init.c, which caused vpp to crash on startup once every 20 times on a particular rig. If possible, we should check /var/log/syslog for evidence of unexpected multiple restarts during regression-testing. Change-Id: Ic48c74b1a94a4368066ba2e326d4b12d51192088 Signed-off-by: Dave Barach <dbarach@cisco.com>
2016-04-15Add LISP APIAndrej Kozemcak1-3/+792
SET API: lisp_add_del_locator_set lisp_add_del_locator lisp_add_del_local_eid lisp_gpe_add_del_fwd_entry lisp_add_del_map_resolver lisp_gpe_add_del_iface SHOW API: lisp_locator_set_dump lisp_local_eid_table_dump lisp_gpe_tunnel_dump lisp_map_resolver_dump Change-Id: Ie7f521e7e64ad2736b8417852b38454bfdef3728 Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
2016-04-09Add IKEv2 APIsMatus Fabian1-0/+364
Change-Id: I5936b05aa927b67c707b5858ffee45fc7a5d2043 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-03-31Enable af_packet interfaces in the API test appsDamjan Marion1-0/+6
Change-Id: Ic1247a712614df2762c95142122ff122076fd0ab Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-03-25iOAM trace configuration APIsShwetha1-3/+130
Change-Id: I6d31f0ddb812d148ad065e27775440d09f402def Signed-off-by: Shwetha <shwethab@cisco.com>
2016-03-07Add sw_interface_clear_stats API callPavel Kotucek1-4/+40
Change-Id: I0731357744ddcb890efaebd81aac5370449a90e3 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2016-02-26Fixed issue with json output in vpp_api_test.Pavel Kotucek1-1/+2
When it runs 'exec' command string "(nil)" is appended to the end of the console output. Change-Id: I7cdae78b2166829dd2160e92ed8181203eb491ed Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2016-02-22Added MTU information to sw_interface_dumpPavel1-0/+1
Change-Id: Ie69837fd6903b715cb7b840b67c869a9b12c84a7 Signed-off-by: Pavel <pavel.kotucek@pantheon.tech>
2016-02-19Add custom mac address option to vhost interfaces.Pierre Pfister1-1/+8
Generating a new MAC address everytime vpp reboots can quickly become cumbersome (e.g. in test scenarios). This commit allows vhost mac addresses to be configured manually. Change-Id: Ic6d16a2d14cdf8e49dc29041bbafde39d9fc8370 Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2016-02-19Serialize and upload the data plane node graphDave Barach2-3/+195
Include node names and graph arcs. Prep work for uploading node runtime data, so the latter can be reported in a comprehensible manner. Change-Id: I215b1f8cff244200c37c7e088f1f22229dc97eb6 Signed-off-by: Dave Barach <dave@barachs.net>
2016-02-19Per-interface, per-address-family fast packet filterDave Barach1-4/+96
Change-Id: I122aa8edfb16a433a8ccdfb72ee8463c48c56d6d Signed-off-by: Dave Barach <dave@barachs.net>
2016-01-22Enable shared-VM namespace supportDave Barach1-1/+4
Required prep work for gracefully supporting "... dpdk { proc-type secondary }" - multiple processes sharing a physical host, VM, container, etc. Change-Id: Ic3eb72f4093e26d7c86dde3b8799264f1d0c218b Signed-off-by: Dave Barach <dave@barachs.net>
2016-01-21PowerPC64-be arch support. Qemu ("qppc") platform support.Dave Barach1-0/+49
Change-Id: Ib0a05f9d1b08bacef09f6d7c101391737031ee0d Signed-off-by: Dave Barach <dave@barachs.net>
2016-01-20Rename vpe binary name to avoid collision with latexDamjan Marion1-1/+1
Change-Id: I34a46b9ebbc0e36486fbef528b34ea1c3be2e8be Signed-off-by: Damjan Marion <damarion@cisco.com>
2015-12-17Add vpe-api message to get vxlan tunnel details.Dave Wallace1-0/+82
Change-Id: I3bfb84dfcb08c6ff5cb473f3ce05b91b222182a1 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2015-12-16Remove warning message outputing vpp-test-api plugin pathEd Warnicke1-1/+0
Currently vpp-test-api plugin path is being output everytime vpp-apt-test is run. Change-Id: Ifbceaeeb6272012b2e46fe77178f44255b4861be Signed-off-by: Ed Warnicke <eaw@cisco.com>
2015-12-15replacing all vec_sort() invocations to vec_sort_with_function()Matus Fabian1-5/+27
Change-Id: I05895827ed52be292112484cee7d0a2591b67335 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2015-12-13new version handlingDamjan Marion1-2/+2
Change-Id: I90983f3df94a3b28199908b29ffd8f827ab0c379 Signed-off-by: Damjan Marion <damarion@cisco.com>
2015-12-08Initial commit of vpp code.v1.0.0Ed Warnicke9-0/+10207
Change-Id: Ib246f1fbfce93274020ee93ce461e3d8bd8b9f17 Signed-off-by: Ed Warnicke <eaw@cisco.com>