aboutsummaryrefslogtreecommitdiffstats
path: root/vpp-api-test
AgeCommit message (Collapse)AuthorFilesLines
2016-07-13Add API dump call for vrf/vni mapping to vpp-api-testFilip Tehlar1-0/+60
Change-Id: I7a028ce9ddf21bd3a7d4991ba1be05e5e74202d6 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-07-12policer actionMatus Fabian1-2/+136
JIRA: VPP-90 Policer allows you to specify the action to be taken on a packet: conform-action (green color) exceed-action (yellow color) violate-action (red color) Action to take on packets: drop - drops the packet transmit - transmits the packet, the packet is not altered mark-and-transmit <DSCP> - sets the DSCP value and transmits the packet Change-Id: I59c037e55e7e2a9fc9b9752e92426f3977f5587b Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-07-12Add incrementing MAC / count support for the l2fib_add_del APIDave Barach1-24/+82
Change-Id: I1df1cd3d2630baab979e840153f1f109d3ead0c2 Signed-off-by: Dave Barach <openvpp@barachs.net>
2016-07-11Simplify API to add LISP adjacenciesFlorin Coras1-34/+2
The API to add an adjacency requires that two things be provided 1) a local and a remote eid 2) the whole remote mapping for the remote eid. Since the API to add remote mappings can be used for 2), 1) in combination with this API are enough to add an adjacency. Change-Id: Ibe7474924bc3f28b6aed19cefa78fdb812de5eac Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-07-08VPP-192 ip_neighbor_add_del incomplete vat helpChris Luke1-4/+5
Adds missing items to ip_neighbor_add_del help text Change-Id: I1d74c7d31ec6d96f8de9bfb5bfc7872b9cbef682 Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-07-08Add locator prority and weight to LISP APIFilip Tehlar1-11/+31
Change-Id: Ifa9bcd9a9c5dbda00ff8096909ccbc822445b8cb Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-07-08Remove unnecessary and obsolete configure.ac directivesDamjan Marion1-2/+1
Also enable silent rules where missing Change-Id: Ia521886815c862b013f01df4cc18fd8a298aaaa1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-07-08Add IPFIX to vpp-api-testJuraj Sloboda1-3/+127
Change-Id: I32dcfb1c33f0b2324de1ebf08851e8b65793e4ea Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2016-07-07VPP-142 Recursive route sending traffic to wrong interfaceNeale1-1/+1
Indirect routes should always result in an indriect adjacency even when the route's next-hop is covered by a connceted, since the covering route may change and no tracking is in place. Some de-duplication of code for installing indirect routes via the CLI and API. Change-Id: I7a440ffba43ae3990b68cb407244c06bd0827534 Signed-off-by: Neale <nranns@cisco.com>
2016-07-07VPP-148 added bvi_mac flag to l2fib_add_del api call similarly to climarek zavodsky1-0/+5
Change-Id: I3b65e85d24ed37b6889af7e194fee45ec61b15a8 Signed-off-by: marek zavodsky <mazavods@gmail.com>
2016-07-07Add an option to dump details about specific LISP EID in API/CLIFilip Tehlar1-0/+49
Change-Id: Ie5e6751fd791e7ca728522632332abe442a1a75b Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-07-04LISP CP cleanup and refactoringFlorin Coras1-5/+140
- avoid code duplication by using only one function for insertion/updating of remote mappings into map-cache. Static remote mappings are now inserted using this function as well and therefore the code does not try to build forwarding entries out of them now. - bring up lisp dp interfaces when a vni is bound to a vrf. - ensure eids are cleaned-up before parsing control plane messages - ensure map-requests are always sent to default fib - new API to insert lisp adjacencies as opposed to remote mappings which should be replaced post merged in CSIT - reorganize and group functions according to their purpose and use. No need to pre-declare internal functions now. - this does not touch locator-set logic Change-Id: Ibcfc0f2d9c1bc1c9eab6e83c1af1b4cf9302ac10 Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-06-30Fix wrong interger type when unformating value in VATFilip Tehlar1-4/+4
Since format string "%d" expects a 32 bit value using u8 type in unformat() results in buffer overflow. Change-Id: Idee5b588049d7573ddbde56c28030f9db3758493 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-06-29Fix the spelling of the word "suppress".Chris Luke1-5/+5
The spelling mistake where "suppress" is written as "surpress" was sufficiently common and annoyed me enough to fix it. For backwards compatibility, the CLI and API test tool both still accept the erroneous spelling. Change-Id: I82104ae9d8c2c9d6e3396ba0d72cb1dc133081d1 Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-06-29Add support for ethernet address in LISP APIFilip Tehlar1-48/+90
Change-Id: I9f1522f55bdd11602784a421fd850b839a1070e6 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-06-27More janitorial workDave Barach1-5/+5
Install vpp api header files in /usr/include/vpp-api, instead of /usr/include/api. Someone will eventually complain if we continue with the status quo. Generate /usr/bin/vpp_plugin_configure, to correctly configure standalone plugin compilation against header files installed from the dev package. If a plugin's CFLAGS don't precisely match the installed vpp engine binary, subtle misbehavior can and will occur. Example: the ip4/ip6 main_t structure size / member offsets depend on DPDK=[0|1]. Screw that one up, and your brand-new configurable ip feature will mysteriously fail to appear, even though the plugin loads perfectly. Change-Id: I20c97fe1042808a79935863209d995c31953b98c Signed-off-by: Dave Barach <dave@barachs.net>
2016-06-27VPP-108 : API calls to read classify table and sessionsPavel Kotucek1-2/+286
Added new API calls to read - classify table ids as array - classify table ids for specified interface - classsify table info and to dump sessions of specified classify table. Change-Id: I089604fa98eea92866495089d76c2330ae7d850c Signed-off-by: Pavel Kotucek <pavel.kotucek@pantheon.tech>
2016-06-23VPP-72 Added api call aquivalents to:marek zavodsky1-2/+309
"show mpls fib" -> "mpls_fib_encap_dump" and "mpls_fib_decap_dump" "show mpls tunnel" -> "mpls_eth_tunnel_dump [tunnel-index <tunnel-id>]" and "mpls_gre_tunnel_dump [tunnel-index <tunnel-id>]" Change-Id: I59699039392f06dc61f62a015d07186a91cfaf45 Signed-off-by: marek zavodsky <mazavods@gmail.com>
2016-06-23LISP EID virtualization supportFilip Tehlar1-1/+57
Change-Id: I892c001cfdff9d8d93e646641d96520beb3c6265 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-06-17New LISP API map-request itr-rlocAndrej Kozemcak1-0/+126
API to constrain source locator when sending map-requests. lisp map-request itr-rloc <locator-set name> Change-Id: I19f3a1aa8a387ca8662ccf3a4ad774ea7d655f80 Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
2016-06-14Add sw_if_index to af_packet_create and various clean upsKeith Burns (alagalah)2-10/+63
Change-Id: I4c2972b55d5d99f3aa7a05885791eef47351c734 Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2016-06-13Add vxlan-gpe tunnel to sw_interface_dumpHongjun Ni1-0/+7
Patchset 2: rebuild Change-Id: I3375d6c9c7e18ab46896552614369b9d77ee6004 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2016-06-13Explicity specify IP address type for format_ip46_address functionDamjan Marion1-1/+19
Change-Id: I3379517535a98a7a5fbd3173503f288a81378821 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-06-07ONE-18: Fix trailing garbage string in LISP status dump APIFilip Tehlar1-0/+2
Change-Id: I5cba5eae5a981e41df3f227834a079e10982537f Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-05-31Add CLI/API for clearing all remote mappingsFilip Tehlar1-2/+5
Change-Id: I5aef12d3a9c8daefff52e5f958c504f5d2ff9fd0 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-05-30Add Dump API for VxLAN-GPE tunnelHongjun Ni1-5/+98
Change-Id: I4913fe6c4b1280939147887896aea9b79a9f7f10 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2016-05-27VPP-95 VXLAN add_del API intermittent failureChris Luke1-1/+1
The VXLAN add_del API sometimes rejects calls with VNET_API_ERROR_SAME_SRC_DST when the two parameters are obviously different. This is because the API code is checking the "is_ip6" flag in a not-yet initialized area of memory leading to random results. Also fix help text for vxlan_add_del_tunnel in vat. This does not change the API; it repairs intermittent failure. Change-Id: I41863694f478c1f669078f82f69d8cca4841c989 Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-05-25Add Vxlan-Gpe over IPv6Hongjun Ni1-6/+37
PatchSet4: consolidate code as per comments. PatchSet3: simplify the code using ip_udp_encap_one/two PatchSet2: consolidate comments and indent style Change-Id: Ia8b43f854a46d77e838e198566200ad28fd72472 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2016-05-23Add LISP RTR supportFilip Tehlar1-1/+57
Change-Id: I8a3770f8f1cd1fde6765b81d35aacaaf4ff98b82 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-05-20VPP-80: netmap binary API message element name collisionDave Barach1-2/+2
if_name collides w/ ietf-interfaces.yang member name, causing a build-break in an existing yang-model-based app. Rename to "netmap_if_name". Change-Id: Id386eacd77343dd15a868c28dacd2b0e4523bc9b Signed-off-by: Dave Barach <dave@barachs.net>
2016-05-20VPP-77 Creating VXLAN over IPv6 via API failsChris Luke1-2/+2
Tunnel dst is incorrectly being set to the requested src address. Change-Id: I44e2ee475f0572e78d148951c5d4684e85e08ce7 Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-05-20Add policer dump APIMatus Fabian1-0/+162
JIRA: VPP-67 Change-Id: I8fced60a884f1585b1f51002832d47631eea9571 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-05-18Add netmap APIMatus Fabian1-3/+98
JIRA: VPP-66 Change-Id: I421529fa8eafe5268745a34a4fcd40156defcdf8 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-05-16Add configure policer APIMatus Fabian1-3/+126
JIRA: VPP-67 Change-Id: I04560d78e2eb131cd6cc31472b70b3d3e8fdd79a Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-05-15ONE-13: Add CLI/API for LISP static remote mappingsFilip Tehlar1-0/+129
Change-Id: Ic4c717af9629541bac0a0e6c65d0157619c8f578 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-05-13VPP43 - NSH refactoring: Added nsh-map nodesKeith Burns (alagalah)1-340/+33
- removed vnet/vnet/nsh-gre - removed all nsh from vnet/vnet/nsh_vxlan_gpe to vnet/vnet/nsh - moved vnet/vnet/nsh_vxlan_gpe to vnet/vnet/vxlan_gpe - added cli and binary api for VXLAN GPE tunnels - plan to move vnet/vnet/nsh to new repo (sfc_nsh) and make plugin - added cli for NSH (binary API will be done in sfc_nsh) - vnet/vnet/gre will be extended in VPP-54 Change-Id: I1d27def916532321577ccd68cb982ae0d0a07e6f Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2016-05-13ONE-11: Fix bugs in LISP APIAndrej Kozemcak1-6/+46
- check input variables - in locator_set dump, add support for remote locator_set Change-Id: Ib10028e83fead358f820ae45c71b6ca4dfbe2f1e Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
2016-05-10ONE-4: Add LISP enable/disable API/CLIFilip Tehlar1-17/+74
This patch adds an enable/disable API/CLI for control plane which calls similar functions for data plane. When re-enabling it also re-populates dataplane with tunnels and interfaces. Change-Id: Id8c3d6af90ecc0be331d502756914b1f62824046 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-05-10Add af_packet APIMatus Fabian1-3/+87
Change-Id: I39409ae9e75fdb59d8cbbd940fa192b24eb79b6a Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-05-09ONE-5: Remove unused vnet_lisp_gpe_add_del_tunnel APIFlorin Coras1-172/+0
Change-Id: Ib22ec807d2b74b7c3cb37f66052cd07bc4d896db Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-05-07VPP-35 Add GRE tunnels to sw_interface_dumpChris Luke1-0/+6
GRE tunnels were missing from vpp_api_test's sw_interface_dump command. $ sudo ./build-root/install-vpp_debug-native/vpp-api-test/bin/vpp_api_test json vat# sw_interface_dump [ ... { "sw_if_index": 7, "sup_sw_if_index": 7, "l2_address_length": 0, "l2_address": [0, 0, 0, 0, 0, 0, 0, 0], "interface_name": "gre0", "admin_up_down": 1, "link_up_down": 0, "link_duplex": 0, "link_speed": 0, "mtu": 0, "sub_id": 0, "sub_dot1ad": 0, "sub_number_of_tags": 0, "sub_outer_vlan_id": 0, "sub_inner_vlan_id": 0, "sub_exact_match": 0, "sub_default": 0, "sub_outer_vlan_id_any": 0, "sub_inner_vlan_id_any": 0, "vtr_op": 0, "vtr_push_dot1q": 0, "vtr_tag1": 0, "vtr_tag2": 0 } ] Change-Id: I6f174f3c384eac464250b22f43b25be6a844aa66 Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-05-05ONE-2: Add new LISP dump API for lisp gpeAndrej Kozemcak1-2/+64
API: lisp_gpe_enable_disable_dump Change-Id: I1c8e78f00f9a3f99c1f2f54884af565292e4ccf8 Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
2016-05-05VPP-39 - refactoring of NSH into own folderKeith Burns (alagalah)1-6/+6
- common header files and structs used in both GRE and VXLAN-GPE Change-Id: I06d0b773e936fb011408817237059f24a4beb412 Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2016-04-30IP6 SR multicast replicatorKeith Burns (alagalah)1-2/+150
- adds ability to name tunnel - creates policy as a collection of tunnel names - map ip6 multicast address to policy and replicate packet - adds zero memcpy for invariant portion of packet Change-Id: Icd2fe6a2cf65c09906e82ed1afbb0eae8df79452 Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2016-04-29VPP-25 Add API for GRE tunnel create/delete/show.Chris Luke1-1/+163
Add API methods to create, delete and show GRE tunnels. Also add missing CLI functionality for deleting and listing configured tunnels. Change-Id: I7565966037d94ade07938e4ff0d9333419716857 Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-04-28VXLAN over IPv6.Chris Luke1-15/+64
Refactors the VXLAN node to work with both IPv4 and IPv6 transports. There is a discussion thread for this change at https://lists.fd.io/pipermail/vpp-dev/2016-March/000279.html Note that this changes the binary configuration API to support both address families; each address uses the same memory for either address type and a flag to indicate which is in use. This also includes changes to the Java API to support both address families. The CLI and VAT syntax remains unchanged; the code detects whether an IPv4 or an IPv6 address was given. Configuration examples: IPv4 CLI: create vxlan tunnel src 192.168.1.1 dst 192.168.1.2 vni 10 encap-vrf-id 0 decap-next l2 IPv6 CLI: create vxlan tunnel src 2620:124:9000::1 dst 2620:124:9000::2 vni 16 encap-vrf-id 0 decap-next l2 IPv4 VAT: vxlan_add_del_tunnel src 192.168.1.1 dst 192.168.1.2 vni 10 encap-vrf-id 0 decap-next l2 IPv6 VAT: vxlan_add_del_tunnel src 2620:124:9000::1 dst 2620:124:9000::2 vni 16 encap-vrf-id 0 decap-next l2 TODO: The encap path is not as optimal as it could be. Change-Id: I87be8bf0501e0c9cd7e401be4542bb599f1b6e47 Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-04-26Fix clang warnings in api codeDamjan Marion1-7/+7
Change-Id: I7a4bc4678fea723c35bbeac1b893c5c52235aa67 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-25Convert lisp-gpe encap to interface tx nodeFlorin Coras1-5/+52
With this change, one lisp-gpe interface is created per vrf/overlay tenant and its tx node is used as encapsulator (or tunnel ingress). For all intents and purposes, the tx node inherits all functions previously performed by the lisp-gpe-encap node and it maintains said node's position in lisp-gpe's data-path graph. Chiefly, this opens the possibility to chain interface features, like IPSec, transparently with LISP. Furthermore, it brings basic data plane support for vrfs and LISP instance-ids (or virtual network instances as per RFC7364). Other changes include improvements to lisp-gpe enable and disable sequences and corresponding API/VAT fixes. Change-Id: I085500450660a976b587b1a720e282f6e728d580 Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-04-22Add clib_memcpy macro based on DPDK rte_memcpy implementationDamjan Marion1-130/+130
Change-Id: I22cb443c4bd0bf298abb6f06e8e4ca65a44a2854 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-22Add a vpp_restart commandDave Barach2-1/+237
vpp_restart solves the problem of restarting vpp and not exiting until the new vpp instance is sufficiently established to allow immediate binary API connections. The point is to avoid using arbitrary "sleep N" commands e.g. in CSIT shell scripts. We send SIGTERM to the current vpp process, and expect / depend on the process-monitor du jour to remove the vpp-api shared-memory segment. vpp_restart exits w/ status 0 if all is well, non-zero upon failure. In trying to make vpp_restart reliable, we discovered a recently-introduced heap corruption bug in .../dpdk/init.c, which caused vpp to crash on startup once every 20 times on a particular rig. If possible, we should check /var/log/syslog for evidence of unexpected multiple restarts during regression-testing. Change-Id: Ic48c74b1a94a4368066ba2e326d4b12d51192088 Signed-off-by: Dave Barach <dbarach@cisco.com>