summaryrefslogtreecommitdiffstats
path: root/vpp-api-test
AgeCommit message (Collapse)AuthorFilesLines
2016-09-13VPP-376: Refactor LISP dump API + VATFilip Tehlar2-932/+230
- refactor VAT so it won't cache data - remove unused filter flag from locator dump API call - json structure changed for locator and EID table dump calls - remote mapping VAT cli now accepts string for negative mapping action Change-Id: I776fb50659aaa7e98ad93715d282a83f78287344 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-09-07Fix bugs in IPFIX code discovered by coverityJuraj Sloboda1-1/+1
Change-Id: Ibe6ccb99c3c29c14efb34191f209a2f6a14293f7 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2016-09-07VPP-382: Add ipsec tunnel interface to sw_interface_dumpMatus Fabian1-0/+6
Change-Id: I9e49c9b6deedb750269da04e3332a3b0742d382c Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-09-07VPP-204 Rework and finish IPFIX implementationJuraj Sloboda1-20/+232
Rework flow report registration system - add streams Add support for IPv6 and src and dst ports for TCP and UDP protocols Implement binary API for IPFIX classifier module Change-Id: Id05cc0127a7b95ceaeebf9c79a32c6936449bd63 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2016-09-06Move iOAM Trace as a pluginVengada Govindan1-94/+16
Change-Id: I78322e91485e5429871bd356f668b8ed90f4265a Signed-off-by: Vengada Govindan <venggovi@cisco.com>
2016-09-06VPP-381 Add LISP interfaces to sw_interface_dumpFlorin Coras1-0/+7
Change-Id: I62b65472e77a33b1fc94f7c4975b5e9cbf358f41 Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-09-03VPP-358: Add IPv6 ND Event Notification and TerminationJohn Lo1-2/+4
Additional fix to vpp_api_test to show which kind of arp/ip6-nd event is received, whether it is address resolution or mac/ip binding. Change-Id: Ic65b895cd1bfbe2f34d1b68891a1a580852fbcdb Signed-off-by: John Lo <loj@cisco.com>
2016-09-02Add in-message cli_request/cli_reply APIOle Troan2-0/+70
This new CLI API is meant to replace the cli_request/cli_reply that uses shared memory. PS: checkstyle -- *hate* Change-Id: I6318f8f6b9be2c2398b49dac9e2193c1998ea724 Signed-off-by: Ole Troan <ot@cisco.com>
2016-08-31VPP-369 Add an L2 output classification featureDave Barach1-2/+5
Change-Id: If03162d328c1ea179249e734537ebb01bade3331 Signed-off-by: Dave Barach <dave@barachs.net>
2016-08-31VPP-358: Add IPv6 ND Event Notification and TerminationJohn Lo1-0/+54
Add IPv6 equivalent of IPv4 ARP event notification which covers address resolution for L3 and MAC/IP binding in L2 BD and ARP termination in BD. For IPv6, ICMP6 neighbor solicitation and advertisement packets are utilized instead of ARP request and response packets for IPv4. Change-Id: I0088fa173e4480de297c8053ea2fcd0821322815 Signed-off-by: John Lo <loj@cisco.com>
2016-08-31VPP-240: delete subinterfacePavel Kotucek1-3/+36
Added new CLI and API command to delete subinterface. Change-Id: Ia92a8facc6ad84634bdec430093e6add02ee674e Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2016-08-30Fix for vppctl to suppress "load_one_plugin:63: Loaded plugin:" msgsEd Warnicke1-2/+2
Change-Id: I06fcb024036b48a6401d2865a2181b122cb32108 Signed-off-by: Ed Warnicke <eaw@cisco.com>
2016-08-30VPP-365: Fix sending of bd_index in lisp_eid_table_add_del_mapFilip Tehlar1-1/+7
Change-Id: I1f8fd65fa33b0bc7ee07aa0eeb5f794a7ede9537 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-08-30VPP-353: Fully support LISP negative mappings in APIFilip Tehlar2-27/+32
Change-Id: I71943fb4ae2a2f71bcf1ad73512812edf96c06da Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-08-26VPP-356: Fix wrong byte order in LISP APIFilip Tehlar1-2/+2
Change-Id: Ib2284025b8394a87f1d5765713adb7070b450cba Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-08-26VPP-329: Add L2 support to lisp_eid_table_map_dumpFilip Tehlar1-4/+35
Change-Id: Idfb115cd1f95394f4a4a569dc34c0488a1d58558 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-08-25VPP-228 VPP-326: MAP: Adding additional API/CLI input parameter checks.Ole Troan1-1/+1
Added checks for EA bits length + PSID length > 64. Removed incorrect check in VAT that required all arguments as mandatory. Change-Id: I33a138612d199d7c5ce59abe1a7d7ecede3522bc Signed-off-by: Ole Troan <ot@cisco.com>
2016-08-25VPP-328: Add dump call for listing LISP VNIsFilip Tehlar1-0/+57
Change-Id: I45c054ad638a0e918dddefa4468ff65452949970 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-08-24VPP-340: MAP-T wrong destination addressOle Troan1-1/+1
The bug was in VAT MAP code parsing a 32 bit integer into a 8 bit type. Perhaps we should try to build some defences in unformat_chech_input() to avoid these errors. Rebuild. Change-Id: Iae4959f7e04d889da2e9650a4201c4db15d74201 Signed-off-by: Ole Troan <ot@cisco.com>
2016-08-23VPP-323: Add LISP locator set index to reply API messageFilip Tehlar1-1/+34
Change-Id: Id798f63f4cf1a8aa7a75931bc23d3c7f5d738938 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-08-17VPP-202: L2-GRE over IPSecv16.12-rc0Matus Fabian1-2/+167
GRE encapsulate layer 2 traffic and IPSec encrypt what is encapsulated by GRE. The whole point of L2-GRE over IPSec is to tunnel layer 2 over GRE and IPSec by bridging the physical interface with IPSec-GRE tunnel interface. Change-Id: Ia4cf9ed407bf663770e0d8905c0ad44ce73bd23b Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-08-12VPP-189 fix more coverity warningsDave Barach1-1/+1
Change-Id: If464a5f06ab15eead9eaf12e89792d3761796956 Signed-off-by: Dave Barach <dave@barachs.net>
2016-08-10VPP-189 Fix coverity warningsDave Barach1-31/+47
in api_format.c. Change-Id: Iedc510fe962b6e8fb8614be4038e695b13e12ef9 Signed-off-by: Dave Barach <dave@barachs.net>
2016-08-09VPP-235: fixed vat help message for sw_interface_set_l2_bridgeCalvin1-1/+1
Change-Id: Ie2a771abbd579c4ffd9679c157dcf435d91ebf7b Signed-off-by: Calvin <calvin.ference@gmail.com>
2016-08-08VPP-189 Fix new Coverity warningsFlorin Coras1-14/+38
Change-Id: I2a580320118d9ab638d9ac0986544ebad8d50e67 Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-08-04VPP-237 vpp-api-test coding style cleanupDave Barach10-10214/+11709
Change-Id: I50a5412463e9346149a7504344a68c8b5762dc97 Signed-off-by: Dave Barach <dave@barachs.net>
2016-08-04LISP multihoming API changes and cleanupFlorin Coras1-0/+1
Change-Id: I106352a6da0fad2b91dc8593f8d6d664af3113a8 Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-08-03VPP-226 - adding UDP TCP to port-rangeKeith Burns (alagalah)1-17/+32
Change-Id: I5f4261279dcdbb03e182b18d05602407c0e55f89 Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2016-08-03LISP API/VAT cleanupFlorin Coras1-193/+151
- cleaned up some of the LISP APIs - added support for mac in dp APIs Change-Id: I11d419a30d73ddbf6554768d6dc2a09cc5a6e072 Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-08-01VPP-226 IPv4 src-address + port range checkerDave Barach1-4/+186
Change-Id: Ia251e9d7d53e894a5666109f69e9626d27ea74cb Signed-off-by: Dave Barach <dave@barachs.net> Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2016-07-31Initial L2 LISP supportFlorin Coras1-4/+7
This introduces support for layer 2 overlays with LISP. Similarly to L3, all tenant packets to be encapsulated are captured by an interface, but the mapping (layer binding) instead of being between an L3 VRF and a LISP VNI, it is between and an L2 bridge domain and a VNI. At a high level, this results in two important properties: 1) the source and destinations of all packets flooded in the bridge-domain are mapped via the LISP control plane and the replies are converted into data-plane tunnels tracked via a LISP specific source/dest L2 FIB 2) All packets reaching the interface and matching a source/dest L2 LISP FIB entry are L3 (IP4/6) encapsulated. This is solely a unicast feature, therefore at this time ARPs are not handled in any special way. Change-Id: I0b7badcd7c6d5166db07d4acd2cc4ae7fba3e18e Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-07-28Edit eid table dumpAndrej Kozemcak2-80/+450
- change output from eid table - add eid filter: all - dump all eid local - dump local eid remote - dump remote eid Change-Id: Ifaaad8abf44cf70c4c22d05252e501456f1f1083 Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
2016-07-28LISP - Bug fix, can`t remove static remote mappingAndrej Kozemcak1-37/+35
Fix bug, can`t remove static remote mapping, small update in LISP remote mapping API. Change-Id: Ide32485a1a0d2cf08829d544500fa2755214b8cc Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
2016-07-28Edit Lisp locator_set APIAndrej Kozemcak2-80/+501
Change the output format of lisp locator_set API. Create new API for lisp locator. Change lisp_enable_disable_status_dump -> show_lisp_status, not use dump function. Change-Id: Ie2024cbf5e55b22ba077266220bf8584d5cac07a Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
2016-07-27VAT add_locator_set api support multiple locatorsAndrej Kozemcak1-1/+32
Change-Id: I22df3d4407bd7fdd953783f00605380a2d6fb46e Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
2016-07-26VPP-214: IPSec cli/api vector ck and ik initializationMatus Fabian1-2/+2
Change-Id: I34e19d1feb350c47987b9764b642ef9baa000581 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-07-26policer classifyMatus Fabian1-5/+205
JIRA: VPP-114 If the classifier finds a matching entry, it sends packet to the policer, packet should be pre-colored for color-aware policers. Change-Id: I10cb53b49907137769418f230df2cab577d0f3a0 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-07-22HONEYCOMB-83: Add Gre FeatureHongjun Ni1-290/+290
PatchSet 3: use clib_memcpy for copy. PatchSet 2: use clib_memcpy() to copy IP address. PatchSet 1: Support IPv6 interface for GRE API. Change-Id: I80ee4b61df15da7fd851b682a97d5d49f89568b7 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2016-07-21Add API calls for packet generatorPavel Kotucek1-4/+163
Added new API to: - create packet generator interface - enable packet generator per stream or all - capture into file Change-Id: I0e6c1f28069853e4b26f0dc9d282353b0b7f6512 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2016-07-20Add new lisp API - Show pitrAndrej Kozemcak1-2/+67
VAT API: - show_lisp_pitr CLI API: - show lisp pitr Change-Id: Ibd31cb09efc34a49b439338e9467faf7a151f2cd Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
2016-07-19VPP-203 Find the relative next node index by node namesKeith Burns (alagalah)1-2/+79
vat# get_next_index node-name vxlan4-input next-node-name l2-input next node index 1 Change-Id: Ib71be8a408d08d59b0ed7dfb6ada9711cf29bd69 Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2016-07-18Add uid/gid config parameters to shared-vm database map operatorDave Barach1-2/+6
So vpp_get_metrics and similar will not need to run as root Change-Id: I635e830834c82990ad84ddaae06f2e50e55fd616 Signed-off-by: Dave Barach <dave@barachs.net>
2016-07-18Fix local eid API in VATFlorin Coras1-1/+1
Change-Id: I14fb0378944db5bf7a8843b4dc361de748659ece Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-07-13Add API dump call for vrf/vni mapping to vpp-api-testFilip Tehlar1-0/+60
Change-Id: I7a028ce9ddf21bd3a7d4991ba1be05e5e74202d6 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-07-12policer actionMatus Fabian1-2/+136
JIRA: VPP-90 Policer allows you to specify the action to be taken on a packet: conform-action (green color) exceed-action (yellow color) violate-action (red color) Action to take on packets: drop - drops the packet transmit - transmits the packet, the packet is not altered mark-and-transmit <DSCP> - sets the DSCP value and transmits the packet Change-Id: I59c037e55e7e2a9fc9b9752e92426f3977f5587b Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-07-12Add incrementing MAC / count support for the l2fib_add_del APIDave Barach1-24/+82
Change-Id: I1df1cd3d2630baab979e840153f1f109d3ead0c2 Signed-off-by: Dave Barach <openvpp@barachs.net>
2016-07-11Simplify API to add LISP adjacenciesFlorin Coras1-34/+2
The API to add an adjacency requires that two things be provided 1) a local and a remote eid 2) the whole remote mapping for the remote eid. Since the API to add remote mappings can be used for 2), 1) in combination with this API are enough to add an adjacency. Change-Id: Ibe7474924bc3f28b6aed19cefa78fdb812de5eac Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-07-08VPP-192 ip_neighbor_add_del incomplete vat helpChris Luke1-4/+5
Adds missing items to ip_neighbor_add_del help text Change-Id: I1d74c7d31ec6d96f8de9bfb5bfc7872b9cbef682 Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-07-08Add locator prority and weight to LISP APIFilip Tehlar1-11/+31
Change-Id: Ifa9bcd9a9c5dbda00ff8096909ccbc822445b8cb Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-07-08Remove unnecessary and obsolete configure.ac directivesDamjan Marion1-2/+1
Also enable silent rules where missing Change-Id: Ia521886815c862b013f01df4cc18fd8a298aaaa1 Signed-off-by: Damjan Marion <damarion@cisco.com>