summaryrefslogtreecommitdiffstats
path: root/vpp-api-test
AgeCommit message (Collapse)AuthorFilesLines
2016-10-10FIB2.0: memory leaks during load-balance update (VPP-475)Neale Ranns1-1/+1
some other fixes and enhancemets to address failures in the IPv6 Scale testing: - The rate at which VPP sends ARP/ND requests, 1 per-millisecond, is too high. This is reduced to 1 every 10 ms. probably still too high. - If an ARP/ND response is received that does not contain a change to the known MAC address, no further processing is done. - Added stats to get info about the async FIB walks. - When walking FIB entries and performing a load-balance update, it is not necessary to re-insert the LB in the forwarding table. Change-Id: Ifd47e4bdbce94495f44aaf1b78e7d1395ed870d1 Signed-off-by: Neale Ranns <nranns@cisco.com>
2016-10-07VPP-395 Add udp-punt node(s) and APIAlexander Popovsky (apopovsk)1-5/+49
Uses existing UDP local API in order to register requested UDP port punt to the host. CLI: set punt udp [del] <port> API: punt protocol <l4-protocol> [ip <ver>] [port <l4-port>] [del] * Only UDP (l4-protocol = 17) is supported at this time Change-Id: I9232af1c891d1ed174d77f3e0dfe60c4b9d85e40 Signed-off-by: Alex Popovsky <apopovsk@cisco.com>
2016-10-04VPP-355: add PBB (802.1ah) tag rewritePavel Kotucek1-3/+96
- new API/CLI to define pbb tag rewrite on interface - encapsulation/decapsulation of PBB tags - tracing of PBB header - PBB tag rewrite operations Change-Id: I538b3025a8b2e41cdeed9f10fea94bbcd28b5f5f Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2016-09-30vat: add pg interfaces to sw_interface_dump (VPP-451)Damjan Marion1-0/+5
Change-Id: I976a44dcfb32b1132c14363174239333315b2c6f Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-09-30VPP-450 Fix adding LISP adjacencies via CLIFilip Tehlar1-44/+43
Change-Id: If90c9c630629e727fffc5d450516045a04433661 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-09-28DPDK HQoS: Enable Hierarchical Scheduler in VPPJasvinder Singh1-0/+236
This commit extends the vpp framework with new thread type "hqos-threads" that runs the Hierarchical Quality of Service (HQoS) scheduler associted with output interface. HQoS Scheduler prioritize the packets from different users and ensures sufficient bandwidth to pass the more important traffic. At high level, HQoS scheduler is a buffer that can temporarily store a large number of packets. In otherwords, it is a collection of large number of queues organized into hierarchy of 5 levels; the port (i.e. the physical interface) is at the root of the hierarchy followed by the subport (a set of users), the pipes (individual users), the traffic classes (each with a strict priority) and at the leaves, the queues. In each HQoS scheduler, three operations are performed; classification (setting HQoS port, subport, pipe, traffic class and queue within traffic class from packet fields), enqueue (selecting HQoS queue for the packet, and to drop the packet if the queue is full) and dequeue (schedule the packet based on its length and available credits, and handover the scheduled packet to the output interface). In vpp, the number of hqos threads will be equal to cpu cores specified in corelist-hqos-threads parameter cpu section of the vpp configuration file. One hqos thread can run HQoS for multiple output interfaces. A particular HQoS instance is initialised with default parameters required to configure hqos port, subport, pipe and queues. Some of them can be re-configured in run-time through CLI commands as well binary APIs. Following illustrates the sample startup configuration file with 4x worker threads feeding 2x hqos threads that handle each HQoS for 1x output interface. For more details on HQoS configuration please refer to DPDK Programmer's Guide. dpdk { socket-mem 16384,16384 dev 0000:02:00.0 { num-rx-queues 2 hqos } dev 0000:06:00.0 { num-rx-queues 2 hqos } num-mbufs 1000000 } cpu { main-core 0 corelist-workers 1, 2, 3, 4 corelist-hqos-threads 5, 6 } Change-Id: I635c3395a7c4ddf0a239ef77b0b0a31a6dfc4767 Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com> Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
2016-09-27VPP-448 Fix LISP APIs using binary dataFilip Tehlar1-6/+10
* use zero length array in LISP API to avoid confusion * add missing LISP data structure definitions in API documentation * fix wrong memory allocation in VAT Change-Id: I9b5e656a071fc24cb698c164db953c09b66deeeb Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-09-27LISP Source/Dest control plane support, VPP-197Florin Coras1-0/+114
Change-Id: If88e4161e0944b657e6183b7b44348f7f46ba0a8 Signed-off-by: Florin Coras <fcoras@cisco.com> Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-09-22VPP-189: fix coverity issue in api_format.cFlorin Coras1-2/+3
Change-Id: I8cf3bb27bc699be3b8de781ea84db4c7fb3c7553 Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-09-22VPP-426: Rename parameter in LISP remote mapping VAT commandFilip Tehlar1-1/+1
Change-Id: Ie52243bd1654e3d0663b09bd1f21e8c15e93f07d Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-09-21A Protocol Independent Hierarchical FIB (VPP-352)Neale Ranns1-3/+9
Main Enhancements: - Protocol Independent FIB API - Hierarchical FIB entries. Dynamic recursive route resolution. - Extranet Support. - Integration of IP and MPLS forwarding. - Separation of FIB and Adjacency databases. - Data-Plane Object forwarding model. Change-Id: I52dc815c0d0aa8b493e3cf6b978568f3cc82296c Signed-off-by: Neale Ranns <nranns@cisco.com>
2016-09-20VPP-189: fix coverity issue in api_format.cFilip Tehlar1-1/+7
Change-Id: Ib16fd69abe93c1afb2ee1d38144763f57888585c Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-09-19Add support for transparent ethernet bridging to GREDavid Hotham1-5/+12
Change-Id: Iaa3cefe223eb48b128893029a17e092b72a5157c Signed-off-by: David Hotham <david.hotham@metaswitch.com>
2016-09-13VPP-376: Refactor LISP dump API + VATFilip Tehlar2-932/+230
- refactor VAT so it won't cache data - remove unused filter flag from locator dump API call - json structure changed for locator and EID table dump calls - remote mapping VAT cli now accepts string for negative mapping action Change-Id: I776fb50659aaa7e98ad93715d282a83f78287344 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-09-07Fix bugs in IPFIX code discovered by coverityJuraj Sloboda1-1/+1
Change-Id: Ibe6ccb99c3c29c14efb34191f209a2f6a14293f7 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2016-09-07VPP-382: Add ipsec tunnel interface to sw_interface_dumpMatus Fabian1-0/+6
Change-Id: I9e49c9b6deedb750269da04e3332a3b0742d382c Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-09-07VPP-204 Rework and finish IPFIX implementationJuraj Sloboda1-20/+232
Rework flow report registration system - add streams Add support for IPv6 and src and dst ports for TCP and UDP protocols Implement binary API for IPFIX classifier module Change-Id: Id05cc0127a7b95ceaeebf9c79a32c6936449bd63 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2016-09-06Move iOAM Trace as a pluginVengada Govindan1-94/+16
Change-Id: I78322e91485e5429871bd356f668b8ed90f4265a Signed-off-by: Vengada Govindan <venggovi@cisco.com>
2016-09-06VPP-381 Add LISP interfaces to sw_interface_dumpFlorin Coras1-0/+7
Change-Id: I62b65472e77a33b1fc94f7c4975b5e9cbf358f41 Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-09-03VPP-358: Add IPv6 ND Event Notification and TerminationJohn Lo1-2/+4
Additional fix to vpp_api_test to show which kind of arp/ip6-nd event is received, whether it is address resolution or mac/ip binding. Change-Id: Ic65b895cd1bfbe2f34d1b68891a1a580852fbcdb Signed-off-by: John Lo <loj@cisco.com>
2016-09-02Add in-message cli_request/cli_reply APIOle Troan2-0/+70
This new CLI API is meant to replace the cli_request/cli_reply that uses shared memory. PS: checkstyle -- *hate* Change-Id: I6318f8f6b9be2c2398b49dac9e2193c1998ea724 Signed-off-by: Ole Troan <ot@cisco.com>
2016-08-31VPP-369 Add an L2 output classification featureDave Barach1-2/+5
Change-Id: If03162d328c1ea179249e734537ebb01bade3331 Signed-off-by: Dave Barach <dave@barachs.net>
2016-08-31VPP-358: Add IPv6 ND Event Notification and TerminationJohn Lo1-0/+54
Add IPv6 equivalent of IPv4 ARP event notification which covers address resolution for L3 and MAC/IP binding in L2 BD and ARP termination in BD. For IPv6, ICMP6 neighbor solicitation and advertisement packets are utilized instead of ARP request and response packets for IPv4. Change-Id: I0088fa173e4480de297c8053ea2fcd0821322815 Signed-off-by: John Lo <loj@cisco.com>
2016-08-31VPP-240: delete subinterfacePavel Kotucek1-3/+36
Added new CLI and API command to delete subinterface. Change-Id: Ia92a8facc6ad84634bdec430093e6add02ee674e Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2016-08-30Fix for vppctl to suppress "load_one_plugin:63: Loaded plugin:" msgsEd Warnicke1-2/+2
Change-Id: I06fcb024036b48a6401d2865a2181b122cb32108 Signed-off-by: Ed Warnicke <eaw@cisco.com>
2016-08-30VPP-365: Fix sending of bd_index in lisp_eid_table_add_del_mapFilip Tehlar1-1/+7
Change-Id: I1f8fd65fa33b0bc7ee07aa0eeb5f794a7ede9537 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-08-30VPP-353: Fully support LISP negative mappings in APIFilip Tehlar2-27/+32
Change-Id: I71943fb4ae2a2f71bcf1ad73512812edf96c06da Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-08-26VPP-356: Fix wrong byte order in LISP APIFilip Tehlar1-2/+2
Change-Id: Ib2284025b8394a87f1d5765713adb7070b450cba Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-08-26VPP-329: Add L2 support to lisp_eid_table_map_dumpFilip Tehlar1-4/+35
Change-Id: Idfb115cd1f95394f4a4a569dc34c0488a1d58558 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-08-25VPP-228 VPP-326: MAP: Adding additional API/CLI input parameter checks.Ole Troan1-1/+1
Added checks for EA bits length + PSID length > 64. Removed incorrect check in VAT that required all arguments as mandatory. Change-Id: I33a138612d199d7c5ce59abe1a7d7ecede3522bc Signed-off-by: Ole Troan <ot@cisco.com>
2016-08-25VPP-328: Add dump call for listing LISP VNIsFilip Tehlar1-0/+57
Change-Id: I45c054ad638a0e918dddefa4468ff65452949970 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-08-24VPP-340: MAP-T wrong destination addressOle Troan1-1/+1
The bug was in VAT MAP code parsing a 32 bit integer into a 8 bit type. Perhaps we should try to build some defences in unformat_chech_input() to avoid these errors. Rebuild. Change-Id: Iae4959f7e04d889da2e9650a4201c4db15d74201 Signed-off-by: Ole Troan <ot@cisco.com>
2016-08-23VPP-323: Add LISP locator set index to reply API messageFilip Tehlar1-1/+34
Change-Id: Id798f63f4cf1a8aa7a75931bc23d3c7f5d738938 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-08-17VPP-202: L2-GRE over IPSecv16.12-rc0Matus Fabian1-2/+167
GRE encapsulate layer 2 traffic and IPSec encrypt what is encapsulated by GRE. The whole point of L2-GRE over IPSec is to tunnel layer 2 over GRE and IPSec by bridging the physical interface with IPSec-GRE tunnel interface. Change-Id: Ia4cf9ed407bf663770e0d8905c0ad44ce73bd23b Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-08-12VPP-189 fix more coverity warningsDave Barach1-1/+1
Change-Id: If464a5f06ab15eead9eaf12e89792d3761796956 Signed-off-by: Dave Barach <dave@barachs.net>
2016-08-10VPP-189 Fix coverity warningsDave Barach1-31/+47
in api_format.c. Change-Id: Iedc510fe962b6e8fb8614be4038e695b13e12ef9 Signed-off-by: Dave Barach <dave@barachs.net>
2016-08-09VPP-235: fixed vat help message for sw_interface_set_l2_bridgeCalvin1-1/+1
Change-Id: Ie2a771abbd579c4ffd9679c157dcf435d91ebf7b Signed-off-by: Calvin <calvin.ference@gmail.com>
2016-08-08VPP-189 Fix new Coverity warningsFlorin Coras1-14/+38
Change-Id: I2a580320118d9ab638d9ac0986544ebad8d50e67 Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-08-04VPP-237 vpp-api-test coding style cleanupDave Barach10-10214/+11709
Change-Id: I50a5412463e9346149a7504344a68c8b5762dc97 Signed-off-by: Dave Barach <dave@barachs.net>
2016-08-04LISP multihoming API changes and cleanupFlorin Coras1-0/+1
Change-Id: I106352a6da0fad2b91dc8593f8d6d664af3113a8 Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-08-03VPP-226 - adding UDP TCP to port-rangeKeith Burns (alagalah)1-17/+32
Change-Id: I5f4261279dcdbb03e182b18d05602407c0e55f89 Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2016-08-03LISP API/VAT cleanupFlorin Coras1-193/+151
- cleaned up some of the LISP APIs - added support for mac in dp APIs Change-Id: I11d419a30d73ddbf6554768d6dc2a09cc5a6e072 Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-08-01VPP-226 IPv4 src-address + port range checkerDave Barach1-4/+186
Change-Id: Ia251e9d7d53e894a5666109f69e9626d27ea74cb Signed-off-by: Dave Barach <dave@barachs.net> Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2016-07-31Initial L2 LISP supportFlorin Coras1-4/+7
This introduces support for layer 2 overlays with LISP. Similarly to L3, all tenant packets to be encapsulated are captured by an interface, but the mapping (layer binding) instead of being between an L3 VRF and a LISP VNI, it is between and an L2 bridge domain and a VNI. At a high level, this results in two important properties: 1) the source and destinations of all packets flooded in the bridge-domain are mapped via the LISP control plane and the replies are converted into data-plane tunnels tracked via a LISP specific source/dest L2 FIB 2) All packets reaching the interface and matching a source/dest L2 LISP FIB entry are L3 (IP4/6) encapsulated. This is solely a unicast feature, therefore at this time ARPs are not handled in any special way. Change-Id: I0b7badcd7c6d5166db07d4acd2cc4ae7fba3e18e Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-07-28Edit eid table dumpAndrej Kozemcak2-80/+450
- change output from eid table - add eid filter: all - dump all eid local - dump local eid remote - dump remote eid Change-Id: Ifaaad8abf44cf70c4c22d05252e501456f1f1083 Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
2016-07-28LISP - Bug fix, can`t remove static remote mappingAndrej Kozemcak1-37/+35
Fix bug, can`t remove static remote mapping, small update in LISP remote mapping API. Change-Id: Ide32485a1a0d2cf08829d544500fa2755214b8cc Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
2016-07-28Edit Lisp locator_set APIAndrej Kozemcak2-80/+501
Change the output format of lisp locator_set API. Create new API for lisp locator. Change lisp_enable_disable_status_dump -> show_lisp_status, not use dump function. Change-Id: Ie2024cbf5e55b22ba077266220bf8584d5cac07a Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
2016-07-27VAT add_locator_set api support multiple locatorsAndrej Kozemcak1-1/+32
Change-Id: I22df3d4407bd7fdd953783f00605380a2d6fb46e Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
2016-07-26VPP-214: IPSec cli/api vector ck and ik initializationMatus Fabian1-2/+2
Change-Id: I34e19d1feb350c47987b9764b642ef9baa000581 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-07-26policer classifyMatus Fabian1-5/+205
JIRA: VPP-114 If the classifier finds a matching entry, it sends packet to the policer, packet should be pre-colored for color-aware policers. Change-Id: I10cb53b49907137769418f230df2cab577d0f3a0 Signed-off-by: Matus Fabian <matfabia@cisco.com>