# Copyright (c) 2020 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | L2XCBASE | DRV_VFIO_PCI
| ... | eth-l2xcbase
|
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance
|
| Test Template | Local Template
|
| Documentation | *RFC2544: Pkt throughput L2XC test cases*
|
| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
| ... | with single links between nodes.
| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect.
| ... | DUT1 tested with ${nic_name}.\
| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
| ... | of packets transmitted. NDR and PDR are discovered for different\
| ... | Ethernet L2 frame sizes using MLRsearch library.\
| ... | Test packets are generated by TG on\
| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
| ... | (flow-group per direction, 254 flows per flow-group) with\
| .# Copyright (c) 2021 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
export WS_ROOT=$(CURDIR)
export BR=$(WS_ROOT)/build-root
CCACHE_DIR?=$(BR)/.ccache
SHELL:=/bin/bash
GDB?=gdb
PLATFORM?=vpp
SAMPLE_PLUGIN?=no
STARTUP_DIR?=$(PWD)
MACHINE=$(shell uname -m)
SUDO?=sudo -E
DPDK_CONFIG?=no-pci
,:=,
define disable_plugins
$(if $(1), \
"plugins {" \
$(patsubst %,"plugin %_plugin.so { disable }",$(subst $(,), ,$(1))) \
" }" \
,)
endef
MINIMAL_STARTUP_CONF=" \
unix { \
interactive \
cli-listen /run/vpp/cli.sock \
gid $(shell id -g) \
$(if $(wildcard startup.vpp),"exec startup.vpp",) \
} \
$(if $(DPDK_CONFIG), "dpdk { $(DPDK_CONFIG) }",) \
$(call disable_plugins,$(DISABLED_PLUGINS)) \
"
GDB_ARGS= -ex "handle SIGUSR1 noprint nostop"
#
# OS Detection
#
# We allow Darwin (MacOS) for docs generation; VPP build will still fail.
ifneq ($(shell uname),Darwin)
OS_ID = $(shell grep '^ID=' /etc/os-release | cut -f2- -d= | sed -e 's/\"//g')
OS_VERSION_ID= $(shell grep '^VERSION_ID=' /etc/os-release | cut -f2- -d= | sed -e 's/\"//g')
endif
ifeq ($(filter ubuntu debian,$(OS_ID)),$(OS_ID))
PKG=deb
else ifeq ($(filter rhel centos fedora opensuse-leap,$(OS_ID)),$(OS_ID))
PKG=rpm
endif
# +libganglia1-dev if building the gmond plugin
DEB_DEPENDS = curl build-essential autoconf automake ccache
DEB_DEPENDS += debhelper dkms git libtool libapr1-dev dh-python
DEB_DEPENDS += libconfuse-dev git-review exuberant-ctags cscope pkg-config
DEB_DEPENDS += lcov chrpath autoconf libnuma-dev
DEB_DEPENDS += python3-all python3-setuptools check
DEB_DEPENDS += libffi-dev python3-ply
DEB_DEPENDS += cmake ninja-build uuid-dev python3-jsonschema python3-yaml
DEB_DEPENDS += python3-venv # ensurepip
DEB_DEPENDS += python3-dev python3-pip
DEB_DEPENDS += libnl-3-dev libnl-route-3-dev libmnl-dev
# DEB_DEPENDS += enchant # for docs
DEB_DEPENDS += python3-virtualenv
DEB_DEPENDS += libssl-dev
DEB_DEPENDS += libelf-dev # for libbpf (af_xdp)
DEB_DEPENDS += iperf3 # for 'make test TEST=vcl'
DEB_DEPENDS += nasm
LIBFFI=libffi6 # works on all but 20.04 and debian-testing
ifeq ($(OS_VERSION_ID),22.04)
DEB_DEPENDS += python3-virtualenv
DEB_DEPENDS += libssl-dev
DEB_DEPENDS += libelf-dev # for libbpf (af_xdp)
DEB_DEPENDS += clang clang-format-11
LIBFFI=libffi7
DEB_DEPENDS += enchant-2 # for docs
else ifeq ($(OS_VERSION_ID),20.04)
DEB_DEPENDS += python3-virtualenv
DEB_DEPENDS += libssl-dev
DEB_DEPENDS += libelf-dev # for libbpf (af_xdp)
DEB_DEPENDS += clang clang-format-11
LIBFFI=libffi7
DEB_DEPENDS += enchant-2 # for docs
else ifeq ($(OS_VERSION_ID),20.10)
DEB_DEPENDS += clang clang-format-11
LIBFFI=libffi8ubuntu1
else ifeq ($(OS_ID)-$(OS_VERSION_ID),debian-10)
DEB_DEPENDS += virtualenv
else ifeq ($(OS_ID)-$(OS_VERSION_ID),debian-11)
DEB_DEPENDS += virtualenv
DEB_DEPENDS += clang clang-format-11
LIBFFI=libffi7
else
DEB_DEPENDS += clang-11 clang-format-11
LIBFFI=libffi7
DEB_DEPENDS += enchant-2 # for docs
endif
DEB_DEPENDS += $(LIBFFI)
RPM_DEPENDS = redhat-lsb glibc-static
RPM_DEPENDS += apr-devel
RPM_DEPENDS += numactl-devel
RPM_DEPENDS += check check-devel
RPM_DEPENDS += selinux-policy selinux-policy-devel
RPM_DEPENDS += ninja-build
RPM_DEPENDS += libuuid-devel
RPM_DEPENDS += ccache
RPM_DEPENDS += xmlto
RPM_DEPENDS += elfutils-libelf-devel
RPM_DEPENDS += libnl3-devel libmnl-devel
RPM_DEPENDS += nasm
ifeq ($(OS_ID),fedora)
RPM_DEPENDS += dnf-utils
RPM_DEPENDS += subunit subunit-devel
RPM_DEPENDS += compat-openssl10-devel
RPM_DEPENDS += python3-devel # needed for python3 -m pip install psutil
RPM_DEPENDS += python3-ply # for vppapigen
RPM_DEPENDS += python3-virtualenv python3-jsonschema
RPM_DEPENDS += cmake
RPM_DEPENDS_GROUPS = 'C Development Tools and Libraries'
else ifeq ($(OS_ID)-$(OS_VERSION_ID),centos-8)
RPM_DEPENDS += yum-utils
RPM_DEPENDS += compat-openssl10 openssl-devel
RPM_DEPENDS += python2-devel python36-devel python3-ply
RPM_DEPENDS += python3-virtualenv python3-jsonschema
RPM_DEPENDS += libarchive cmake
RPM_DEPENDS_GROUPS = 'Development Tools'
else
RPM_DEPENDS += yum-utils
RPM_DEPENDS += openssl-devel
RPM_DEPENDS += python36-ply # for vppapigen
RPM_DEPENDS += python3-devel python3-pip
RPM_DEPENDS += python-virtualenv python36-jsonschema
RPM_DEPENDS += devtoolset-9 devtoolset-9-libasan-devel
RPM_DEPENDS += cmake3
RPM_DEPENDS_GROUPS = 'Development Tools'
endif
# +ganglia-devel if building the ganglia plugin
RPM_DEPENDS += chrpath libffi-devel rpm-build
RPM_DEPENDS_DEBUG = glibc-debuginfo e2fsprogs-debuginfo
RPM_DEPENDS_DEBUG += krb5-debuginfo openssl-debuginfo
RPM_DEPENDS_DEBUG += zlib-debuginfo nss-softokn-debuginfo
RPM_DEPENDS_DEBUG += yum-plugin-auto-update-debug-info
RPM_SUSE_BUILDTOOLS_DEPS = autoconf automake ccache check-devel chrpath
RPM_SUSE_BUILDTOOLS_DEPS += clang cmake indent libtool make ninja python3-ply
RPM_SUSE_DEVEL_DEPS = glibc-devel-static libnuma-devel libelf-devel
RPM_SUSE_DEVEL_DEPS += libopenssl-devel libuuid-devel lsb-release
RPM_SUSE_DEVEL_DEPS += curl libstdc++-devel bison gcc-c++ zlib-devel
RPM_SUSE_PYTHON_DEPS = python3-devel python3-pip python3-rpm-macros
RPM_SUSE_PLATFORM_DEPS = shadow rpm-build
ifeq ($(OS_ID),opensuse-leap)
RPM_SUSE_DEVEL_DEPS += xmlto openssl-devel asciidoc git nasm
RPM_SUSE_PYTHON_DEPS += python3 python3-ply python3-virtualenv
RPM_SUSE_PLATFORM_DEPS += distribution-release
endif
RPM_SUSE_DEPENDS += $(RPM_SUSE_BUILDTOOLS_DEPS) $(RPM_SUSE_DEVEL_DEPS) $(RPM_SUSE_PYTHON_DEPS) $(RPM_SUSE_PLATFORM_DEPS)
ifneq ($(wildcard $(STARTUP_DIR)/startup.conf),)
STARTUP_CONF ?= $(STARTUP_DIR)/startup.conf
endif
ifeq ($(findstring y,$(UNATTENDED)),y)
CONFIRM=-y
FORCE=--allow-downgrades --allow-remove-essential --allow-change-held-packages
endif
TARGETS = vpp
ifneq ($(SAMPLE_PLUGIN),no)
TARGETS += sample-plugin
endif
define banner
@echo "========================================================================"
@echo " $(1)"
@echo "========================================================================"
@echo " "
endef
.PHONY: help
help:
@echo "Make Targets:"
@echo " install-dep[s] - install software dependencies"
@echo " wipe - wipe all products of debug build "
@echo " wipe-release - wipe all products of release build "
@echo " build - build debug binaries"
@echo " build-release - build release binaries"
@echo " build-coverity - build coverity artifacts"
@echo " rebuild - wipe and build debug binaries"
@echo " rebuild-release - wipe and build release binaries"
@echo " run - run debug binary"
@echo " run-release - run release binary"
@echo " debug - run debug binary with debugger"
@echo " debug-release - run release binary with debugger"
@echo " test - build and run tests"
@echo " test-help - show help on test framework"
@echo " run-vat - run vpp-api-test tool"
@echo " pkg-deb - build DEB packages"
@echo " pkg-deb-debug - build DEB debug packages"
@echo " pkg-snap - build SNAP package"
@echo " snap-clean - clean up snap build environment"
@echo " pkg-rpm - build RPM packages"
@echo " install-ext-dep[s] - install external development dependencies"
@echo " ctags - (re)generate ctags database"
@echo " gtags - (re)generate gtags database"
@echo " cscope - (re)generate cscope database"
@echo " compdb - (re)generate compile_commands.json"
@echo " checkstyle - check coding style"
@echo " checkstyle-commit - check commit message format"
@echo " checkstyle-python - check python coding style using 'black' formatter"
@echo " checkstyle-api - check api for incompatible changes"
@echo " fixstyle - fix coding style"
@echo " fixstyle-python - fix python coding style using 'black' formatter"
@echo " doxygen - DEPRECATED - use 'make docs'"
@echo " bootstrap-doxygen - DEPRECATED"
@echo " wipe-doxygen - DEPRECATED"
@echo " checkfeaturelist - check FEATURE.yaml according to schema"
@echo " featurelist - dump feature list in markdown"
@echo " json-api-files - (re)-generate json api files"
@echo " json-api-files-debug - (re)-generate json api files for debug target"
@echo " go-api-files - (re)-generate golang api files"
@echo " docs - Build the Sphinx documentation"
@echo " docs-venv - Build the virtual environment for the Sphinx docs"
@echo " docs-clean - Remove the generated files from the Sphinx docs"
@echo " docs-rebuild - Rebuild all of the Sphinx documentation"
@echo ""
@echo "Make Arguments:"
@echo " V=[0|1] - set build verbosity level"
@echo " STARTUP_CONF=<path> - startup configuration file"
@echo " (e.g. /etc/vpp/startup.conf)"
@echo " STARTUP_DIR=<path> - startup directory (e.g. /etc/vpp)"
@echo " It also sets STARTUP_CONF if"
@echo " startup.conf file is present"
@echo " GDB=<path> - gdb binary to use for debugging"
@echo " PLATFORM=<name> - target platform. default is vpp"
@echo " DPDK_CONFIG=<conf> - add specified dpdk config commands to"
@echo " autogenerated startup.conf"
@echo " (e.g. \"no-pci\" )"
@echo " SAMPLE_PLUGIN=yes - in addition build/run/debug sample plugin"
@echo " DISABLED_PLUGINS=<list> - comma separated list of plugins which"
@echo " should not be loaded"
@echo ""
@echo "Current Argument Values:"
@echo " V = $(V)"
@echo " STARTUP_CONF = $(STARTUP_CONF)"
@echo " STARTUP_DIR = $(STARTUP_DIR)"
@echo " GDB = $(GDB)"
@echo " PLATFORM = $(PLATFORM)"
@echo " DPDK_VERSION = $(DPDK_VERSION)"
@echo " DPDK_CONFIG = $(DPDK_CONFIG)"
@echo " SAMPLE_PLUGIN = $(SAMPLE_PLUGIN)"
@echo " DISABLED_PLUGINS = $(DISABLED_PLUGINS)"
$(BR)/.deps.ok:
ifeq ($(findstring y,$(UNATTENDED)),y)
make install-dep
endif
ifeq ($(filter ubuntu debian,$(OS_ID)),$(OS_ID))
@MISSING=$$(apt-get install -y -qq -s $(DEB_DEPENDS) | grep "^Inst ") ; \
if [ -n "$$MISSING" ] ; then \
echo "\nPlease install missing packages: \n$$MISSING\n" ; \
echo "by executing \"make install-dep\"\n" ; \
exit 1 ; \
fi ; \
exit 0
else ifneq ("$(wildcard /etc/redhat-release)","")
@for i in $(RPM_DEPENDS) ; do \
RPM=$$(basename -s .rpm "$${i##*/}" | cut -d- -f1,2,3,4) ; \
MISSING+=$$(rpm -q $$RPM | grep "^package") ; \
done ; \
if [ -n "$$MISSING" ] ; then \
echo "Please install missing RPMs: \n$$MISSING\n" ; \
echo "by executing \"make install-dep\"\n" ; \
exit 1 ; \
fi ; \
exit 0
endif
@touch $@
.PHONY: bootstrap
bootstrap:
@echo "'make bootstrap' is not needed anymore"
.PHONY: install-dep
install-dep:
ifeq ($(filter ubuntu debian,$(OS_ID)),$(OS_ID))
@sudo -E apt-get update
@sudo -E apt-get $(APT_ARGS) $(CONFIRM) $(FORCE) install $(DEB_DEPENDS)
else ifneq ("$(wildcard /etc/redhat-release)","")
ifeq ($(OS_ID),rhel)
@sudo -E yum-config-manager --enable rhel-server-rhscl-7-rpms
@sudo -E yum groupinstall $(CONFIRM) $(RPM_DEPENDS_GROUPS)
@sudo -E yum install $(CONFIRM) $(RPM_DEPENDS)
@sudo -E debuginfo-install $(CONFIRM) glibc openssl-libs zlib
else ifeq ($(OS_ID)-$(OS_VERSION_ID),centos-8)
@sudo -E dnf install $(CONFIRM) dnf-plugins-core epel-release
@sudo -E dnf config-manager --set-enabled \
$(shell dnf repolist all 2>/dev/null|grep -i powertools|cut -d' ' -f1|grep -v source)
@sudo -E dnf groupinstall $(CONFIRM) $(RPM_DEPENDS_GROUPS)
@sudo -E dnf install --skip-broken $(CONFIRM) $(RPM_DEPENDS)
else ifeq ($(OS_ID),centos)
@sudo -E yum install $(CONFIRM) centos-release-scl-rh epel-release
@sudo -E yum groupinstall $(CONFIRM) $(RPM_DEPENDS_GROUPS)
@sudo -E yum install $(CONFIRM) $(RPM_DEPENDS)
@sudo -E yum install $(CONFIRM) --enablerepo=base-debuginfo $(RPM_DEPENDS_DEBUG)
else ifeq ($(OS_ID),fedora)
@sudo -E dnf groupinstall $(CONFIRM) $(RPM_DEPENDS_GROUPS)
@sudo -E dnf install $(CONFIRM) $(RPM_DEPENDS)
@sudo -E debuginfo-install $(CONFIRM) glibc openssl-libs zlib
endif
else ifeq ($(filter opensuse-leap-15.3 opensuse-leap-15.4 ,$(OS_ID)-$(OS_VERSION_ID)),$(OS_ID)-$(OS_VERSION_ID))
@sudo -E zypper refresh
@sudo -E zypper install -y $(RPM_SUSE_DEPENDS)
else
$(error "This option currently works only on Ubuntu, Debian, RHEL, CentOS or openSUSE-leap systems")
endif
git config commit.template .git_commit_template.txt
.PHONY: install-deps
install-deps: install-dep
define make
@make -C $(BR) PLATFORM=$(PLATFORM) TAG=$(1) $(2)
endef
$(BR)/scripts/.version:
ifneq ("$(wildcard /etc/redhat-release)","")
$(shell $(BR)/scripts/version rpm-string > $(BR)/scripts/.version)
else
$(shell $(BR)/scripts/version > $(BR)/scripts/.version)
endif
DIST_FILE = $(BR)/vpp-$(shell src/scripts/version).tar
DIST_SUBDIR = vpp-$(shell src/scripts/version|cut -f1 -d-)
.PHONY: dist
dist:
@if git rev-parse 2> /dev/null ; then \
git archive \
--prefix=$(DIST_SUBDIR)/ \
--format=tar \
-o $(DIST_FILE) \
HEAD ; \
git describe --long > $(BR)/.version ; \
else \
(cd .. ; tar -cf $(DIST_FILE) $(DIST_SUBDIR) --exclude=*.tar) ; \
src/scripts/version > $(BR)/.version ; \
fi
@tar --append \
--file $(DIST_FILE) \
--transform='s,.*/.version,$(DIST_SUBDIR)/src/scripts/.version,' \
$(BR)/.version
@$(RM) $(BR)/.version $(DIST_FILE).xz
@xz -v --threads=0 $(DIST_FILE)
@$(RM) $(BR)/vpp-latest.tar.xz
@ln -rs $(DIST_FILE).xz $(BR)/vpp-latest.tar.xz
.PHONY: build
build: $(BR)/.deps.ok
$(call make,$(PLATFORM)_debug,$(addsuffix -install,$(TARGETS)))
.PHONY: wipedist
wipedist:
@$(RM) $(BR)/*.tar.xz
.PHONY: wipe
wipe: wipedist test-wipe $(BR)/.deps.ok
$(call make,$(PLATFORM)_debug,$(addsuffix -wipe,$(TARGETS)))
@find . -type f -name "*.api.json" ! -path "./src/*" -exec rm {} \;
.PHONY: rebuild
rebuild: wipe build
.PHONY: build-release
build-release: $(BR)/.deps.ok
$(call make,$(PLATFORM),$(addsuffix -install,$(TARGETS)))
.PHONY: wipe-release
wipe-release: test-wipe $(BR)/.deps.ok
$(call make,$(PLATFORM),$(addsuffix -wipe,$(TARGETS)))
.PHONY: rebuild-release
rebuild-release: wipe-release build-release
export TEST_DIR ?= $(WS_ROOT)/test
define test
$(if $(filter-out $(2),retest),make -C $(BR) PLATFORM=vpp TAG=$(1) vpp-install,)
$(eval libs:=lib lib64)
make -C test \
VPP_BUILD_DIR=$(BR)/build-$(1)-native/vpp \
VPP_BIN=$(BR)/install-$(1)-native/vpp/bin/vpp \
VPP_INSTALL_PATH=$(BR)/install-$(1)-native/ \
EXTENDED_TESTS=$(EXTENDED_TESTS) \
PYTHON=$(PYTHON) \
OS_ID=$(OS_ID) \
RND_SEED=$(RND_SEED) \
CACHE_OUTPUT=$(CACHE_OUTPUT) \
TAG=$(1) \
$(2)
endef
.PHONY: test
test:
$(call test,vpp,test)
.PHONY: test-debug
test-debug:
$(call test,vpp_debug,test)
.PHONY: test-gcov
test-gcov:
$(call test,vpp_gcov,test)
.PHONY: test-all
test-all:
$(eval EXTENDED_TESTS=1)
$(call test,vpp,test)
.PHONY: test-all-debug
test-all-debug:
$(eval EXTENDED_TESTS=1)
$(call test,vpp_debug,test)
.PHONY: papi-wipe
papi-wipe: test-wipe-papi
$(call banner,"This command is deprecated. Please use 'test-wipe-papi'")
.PHONY: test-wipe-papi
test-wipe-papi:
@make -C test wipe-papi
.PHONY: test-help
test-help:
@make -C test help
.PHONY: test-wipe
test-wipe:
@make -C test wipe
.PHONY: test-shell
test-shell:
$(call test,vpp,shell)
.PHONY: test-shell-debug
test-shell-debug:
$(call test,vpp_debug,shell)
.PHONY: test-shell-gcov
test-shell-gcov:
$(call test,vpp_gcov,shell)
.PHONY: test-dep
test-dep:
@make -C test test-dep
.PHONY: test-doc
test-doc:
@echo "make test-doc is DEPRECATED: use 'make docs'"
sleep 300
.PHONY: test-wipe-doc
test-wipe-doc:
@echo "make test-wipe-doc is DEPRECATED"
sleep 300
.PHONY: test-cov
test-cov:
$(eval EXTENDED_TESTS=1)
$(call test,vpp_gcov,cov)
.PHONY: test-wipe-cov
test-wipe-cov:
@make -C test wipe-cov
.PHONY: test-wipe-all
test-wipe-all:
@make -C test wipe-all
# Note: All python venv consolidated in test/Makefile, test/requirements*.txt
.PHONY: test-checkstyle
test-checkstyle:
$(warning test-checkstyle is deprecated. Running checkstyle-python.")
@make -C test checkstyle-python-all
# Note: All python venv consolidated in test/Makefile, test/requirements*.txt
.PHONY: test-checkstyle-diff
test-checkstyle-diff:
$(warning test-checkstyle-diff is deprecated. Running checkstyle-python.")
@make -C test checkstyle-python-all
.PHONY: test-refresh-deps
test-refresh-deps:
@make -C test refresh-deps
.PHONY: retest
retest:
$(call test,vpp,retest)
.PHONY: retest-debug
retest-debug:
$(call test,vpp_debug,retest)
.PHONY: retest-all
retest-all:
$(eval EXTENDED_TESTS=1)
$(call test,vpp,retest)
.PHONY: retest-all-debug
retest-all-debug:
$(eval EXTENDED_TESTS=1)
$(call test,vpp_debug,retest)
.PHONY: test-start-vpp-in-gdb
test-start-vpp-in-gdb:
$(call test,vpp,start-gdb)
.PHONY: test-start-vpp-debug-in-gdb
test-start-vpp-debug-in-gdb:
$(call test,vpp_debug,start-gdb)
ifeq ("$(wildcard $(STARTUP_CONF))","")
define run
@echo "WARNING: STARTUP_CONF not defined or file doesn't exist."
@echo " Running with minimal startup config: $(MINIMAL_STARTUP_CONF)\n"
@cd $(STARTUP_DIR) && \
$(SUDO) $(2) $(1)/vpp/bin/vpp $(MINIMAL_STARTUP_CONF)
endef
else
define run
@cd $(STARTUP_DIR) && \
$(SUDO) $(2) $(1)/vpp/bin/vpp $(shell cat $(STARTUP_CONF) | sed -e 's/#.*//')
endef
endif
%.files: .FORCE
@find src -name '*.[chS]' > $@
.FORCE:
.PHONY: run
run:
$(call run, $(BR)/install-$(PLATFORM)_debug-native)
.PHONY: run-release
run-release:
$(call run, $(BR)/install-$(PLATFORM)-native)
.PHONY: debug
debug:
$(call run, $(BR)/install-$(PLATFORM)_debug-native,$(GDB) $(GDB_ARGS) --args)
.PHONY: build-coverity
build-coverity:
$(call make,$(PLATFORM)_coverity,install-packages)
@make -C build-root PLATFORM=vpp TAG=vpp_coverity libmemif-install
.PHONY: debug-release
debug-release:
$(call run, $(BR)/install-$(PLATFORM)-native,$(GDB) $(GDB_ARGS) --args)
.PHONY: build-vat
build-vat:
$(call make,$(PLATFORM)_debug,vpp-api-test-install)
.PHONY: run-vat
run-vat:
@$(SUDO) $(BR)/install-$(PLATFORM)_debug-native/vpp/bin/vpp_api_test
.PHONY: pkg-deb
pkg-deb:
$(call make,$(PLATFORM),vpp-package-deb)
.PHONY: pkg-snap
pkg-snap:
cd extras/snap ; \
./prep ; \
SNAPCRAFT_BUILD_ENVIRONMENT_MEMORY=8G \
SNAPCRAFT_BUILD_ENVIRONMENT_CPU=6 \
snapcraft --debug
.PHONY: snap-clean
snap-clean:
cd extras/snap ; \
snapcraft clean ; \
rm -f *.snap *.tgz
.PHONY: pkg-deb-debug
pkg-deb-debug:
$(call make,$(PLATFORM)_debug,vpp-package-deb)
.PHONY: pkg-rpm
pkg-rpm: dist
make -C extras/rpm
.PHONY: pkg-srpm
pkg-srpm: dist
make -C extras/rpm srpm
.PHONY: install-ext-deps
install-ext-deps:
make -C build/external install-$(PKG)
.PHONY: install-ext-dep
install-ext-dep: install-ext-deps
.PHONY: json-api-files
json-api-files:
$(WS_ROOT)/src/tools/vppapigen/generate_json.py
.PHONY: json-api-files-debug
json-api-files-debug:
$(WS_ROOT)/src/tools/vppapigen/generate_json.py --debug-target
.PHONY: go-api-files
go-api-files: json-api-files
$(WS_ROOT)/src/tools/vppapigen/generate_go.py $(ARGS)
.PHONY: ctags
ctags: ctags.files
@ctags --totals --tag-relative=yes -L $<
@rm $<
.PHONY: gtags
gtags: ctags
@gtags --gtagslabel=ctags
.PHONY: cscope
cscope: cscope.files
@cscope -b -q -v
.PHONY: compdb
compdb:
@ninja -C build-root/build-vpp_debug-native/vpp build.ninja
@ninja -C build-root/build-vpp_debug-native/vpp -t compdb | \
src/scripts/compdb_cleanup.py > compile_commands.json
.PHONY: checkstyle
checkstyle: checkfeaturelist
@extras/scripts/checkstyle.sh
.PHONY: checkstyle-commit
checkstyle-commit:
@extras/scripts/check_commit_msg.sh
.PHONY: checkstyle-test
checkstyle-test:
$(warning test-checkstyle is deprecated. Running checkstyle-python.")
@make -C test checkstyle-python-all
# Note: All python venv consolidated in test/Makefile, test/requirements*.txt
.PHONY: checkstyle-python
checkstyle-python:
@make -C test checkstyle-python-all
.PHONY: checkstyle-all
checkstyle-all: checkstyle-commit checkstyle checkstyle-python docs-spell
.PHONY: fixstyle
fixstyle:
@extras/scripts/checkstyle.sh --fix
# Note: All python venv consolidated in test/Makefile, test/requirements*.txt
.PHONY: fixstyle-python
fixstyle-python:
@make -C test fixstyle-python-all
.PHONY: checkstyle-api
checkstyle-api:
@extras/scripts/crcchecker.py --check-patchset
# necessary because Bug 1696324 - Update to python3.6 breaks PyYAML dependencies
# Status: CLOSED CANTFIX
# https://bugzilla.redhat.com/show_bug.cgi?id=1696324
.PHONY: centos-pyyaml
centos-pyyaml:
ifeq ($(OS_ID)-$(OS_VERSION_ID),centos-8)
@sudo -E yum install $(CONFIRM) python3-pyyaml
endif
.PHONY: featurelist
featurelist: centos-pyyaml
@extras/scripts/fts.py --all --markdown
.PHONY: checkfeaturelist
checkfeaturelist: centos-pyyaml
@extras/scripts/fts.py --validate --all
#
# Build the documentation
#
.PHONY: bootstrap-doxygen
bootstrap-doxygen:
@echo "make bootstrap-doxygen is DEPRECATED"
sleep 300
.PHONY: doxygen
doxygen: docs
@echo "make doxygen is DEPRECATED: use 'make docs'"
sleep 300
.PHONY: wipe-doxygen
wipe-doxygen:
@echo "make wipe-doxygen is DEPRECATED"
sleep 300
.PHONY: docs-%
docs-%:
@make -C $(WS_ROOT)/docs $*
.PHONY: docs
docs:
@make -C $(WS_ROOT)/docs docs
.PHONY: pkg-verify
pkg-verify: install-dep $(BR)/.deps.ok install-ext-deps
$(call banner,"Building for PLATFORM=vpp using gcc")
@make -C build-root PLATFORM=vpp TAG=vpp wipe-all install-packages
$(call banner,"Building sample-plugin")
@make -C build-root PLATFORM=vpp TAG=vpp sample-plugin-install
$(call banner,"Building libmemif")
@make -C build-root PLATFORM=vpp TAG=vpp libmemif-install
$(call banner,"Building $(PKG) packages")
@make pkg-$(PKG)
MAKE_VERIFY_GATE_OS ?= ubuntu-20.04
.PHONY: verify
verify: pkg-verify
ifeq ($(OS_ID)-$(OS_VERSION_ID),$(MAKE_VERIFY_GATE_OS))
$(call banner,"Testing vppapigen")
@src/tools/vppapigen/test_vppapigen.py
$(call banner,"Running tests")
@make COMPRESS_FAILED_TEST_LOGS=yes RETRIES=3 test
else
$(call banner,"Skipping tests. Tests under 'make verify' supported on $(MAKE_VERIFY_GATE_OS)")
endif