path: root/src/scripts/vnet/virl/simple.virl

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<topology xmlns="http://www.cisco.com/VIRL" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" schemaVersion="0.9" xsi:schemaLocation="http://www.cisco.com/VIRL https://raw.github.com/CiscoVIRL/schema/v0.9/virl.xsd">
    <extensions>
        <entry key="management_network" type="String">flat</entry>
    </extensions>
    <node name="iosv-1" type="SIMPLE" subtype="IOSv" location="427,219" ipv4="192.168.0.2">
        <extensions>
            <entry key="config" type="string">!
! Last configuration change at 14:27:32 UTC Fri Mar 27 2015
!
version 15.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname iosv-1
!
boot-start-marker
boot-end-marker
!
!
enable password cisco
!
no aaa new-model
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
cts logging verbose
!
!
!
redundancy
!
!
! 
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 ip address 192.168.0.2 255.255.255.255
!
interface GigabitEthernet0/0
 description OOB Management
 ip address 172.16.1.167 255.255.255.0
 duplex auto
 speed auto
 media-type rj45
!
interface GigabitEthernet0/1
 description to vpp-1
 ip address 10.0.0.5 255.255.255.252
 ip ospf cost 1
 duplex auto
 speed auto
 media-type rj45
!
router ospf 1
 passive-interface Loopback0
 network 10.0.0.4 0.0.0.3 area 0
 network 192.168.0.2 0.0.0.0 area 0
!
router bgp 1
 bgp router-id 192.168.0.2
 bgp log-neighbor-changes
 neighbor 192.168.0.3 remote-as 1
 neighbor 192.168.0.3 description iBGP peer iosv-2
 neighbor 192.168.0.3 update-source Loopback0
 !
 address-family ipv4
  network 192.168.0.2 mask 255.255.255.255
  neighbor 192.168.0.3 activate
 exit-address-family
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route 10.0.0.9 255.255.255.255 10.0.0.6
!
!
!
!
control-plane
!
banner exec `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
* education. IOSv is provided as-is and is not supported by Cisco's      *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any       *
* purposes is expressly prohibited except as otherwise authorized by     *
* Cisco in writing.                                                      *
**************************************************************************`
banner incoming `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
* education. IOSv is provided as-is and is not supported by Cisco's      *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any       *
* purposes is expressly prohibited except as otherwise authorized by     *
* Cisco in writing.                                                      *
**************************************************************************`
banner login `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
* education. IOSv is provided as-is and is not supported by Cisco's      *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any       *
* purposes is expressly prohibited except as otherwise authorized by     *
* Cisco in writing.                                                      *
**************************************************************************`
!
line con 0
 password cisco
line aux 0
line vty 0 4
 exec-timeout 720 0
 password cisco
 login
 transport input telnet ssh
!
no scheduler allocate
!
end</entry>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.5" netPrefixLenV4="30"/>
    </node>
    <node name="iosv-2" type="SIMPLE" subtype="IOSv" location="704,221" ipv4="192.168.0.3">
        <extensions>
            <entry key="config" type="string">!
! Last configuration change at 14:26:58 UTC Fri Mar 27 2015
!
version 15.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname iosv-2
!
boot-start-marker
boot-end-marker
!
!
enable password cisco
!
no aaa new-model
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
cts logging verbose
!
!
!
redundancy
!
!
! 
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 ip address 192.168.0.3 255.255.255.255
!
interface GigabitEthernet0/0
 description OOB Management
 ip address 172.16.1.164 255.255.255.0
 duplex auto
 speed auto
 media-type rj45
!
interface GigabitEthernet0/1
 description to vpp-1
 ip address 10.0.0.9 255.255.255.252
 ip ospf cost 1
 duplex auto
 speed auto
 media-type rj45
!
router ospf 1
 passive-interface Loopback0
 network 10.0.0.8 0.0.0.3 area 0
 network 192.168.0.3 0.0.0.0 area 0
!
router bgp 1
 bgp router-id 192.168.0.3
 bgp log-neighbor-changes
 neighbor 192.168.0.2 remote-as 1
 neighbor 192.168.0.2 description iBGP peer iosv-1
 neighbor 192.168.0.2 update-source Loopback0
 !
 address-family ipv4
  network 192.168.0.3 mask 255.255.255.255
  neighbor 192.168.0.2 activate
 exit-address-family
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route 10.0.0.5 255.255.255.255 10.0.0.10
!
!
!
!
control-plane
!
banner exec `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
* education. IOSv is provided as-is and is not supported by Cisco's      *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any       *
* purposes is expressly prohibited except as otherwise authorized by     *
* Cisco in writing.                                                      *
**************************************************************************`
banner incoming `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
* education. IOSv is provided as-is and is not supported by Cisco's      *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any       *
* purposes is expressly prohibited except as otherwise authorized by     *
* Cisco in writing.                                                      *
**************************************************************************`
banner login `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
* education. IOSv is provided as-is and is not supported by Cisco's      *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any       *
* purposes is expressly prohibited except as otherwise authorized by     *
* Cisco in writing.                                                      *
**************************************************************************`
!
line con 0
 password cisco
line aux 0
line vty 0 4
 exec-timeout 720 0
 password cisco
 login
 transport input telnet ssh
!
no scheduler allocate
!
end</entry>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.9" netPrefixLenV4="30"/>
    </node>
    <node name="vpp-1" type="SIMPLE" subtype="vPP" location="561,217">
        <extensions>
            <entry key="config" type="string">#cloud-config
bootcmd:
- ln -s -t /etc/rc.d /etc/rc.local
hostname: vpp-1
manage_etc_hosts: true
runcmd:
- start ttyS0
- systemctl start getty@ttyS0.service
- systemctl start rc-local
- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config
- echo "UseDNS no" &gt;&gt; /etc/ssh/sshd_config
- service ssh restart
- service sshd restart
- sed -i 's/no-pci//' /cisco/etc/qn.conf
- sed -i 's/1024/1024 decimal-interface-names/g' /cisco/etc/qn.conf
users:
- default
- gecos: User configured by VIRL Configuration Engine 0.15.3
  lock-passwd: false
  name: cisco
  plain-text-passwd: cisco
  shell: /bin/bash
  ssh-authorized-keys:
  - VIRL-USER-SSH-PUBLIC-KEY
  sudo: ALL=(ALL) ALL
write_files:
- path: /etc/init/ttyS0.conf
  owner: root:root
  content: |
    # ttyS0 - getty
    # This service maintains a getty on ttyS0 from the point the system is
    # started until it is shut down again.
    start on stopped rc or RUNLEVEL=[12345]
    stop on runlevel [!12345]
    respawn
    exec /sbin/getty -L 115200 ttyS0 vt102
  permissions: '0644'
- path: /etc/systemd/system/dhclient@.service
  content: |
    [Unit]
    Description=Run dhclient on %i interface
    After=network.target
    [Service]
    Type=oneshot
    ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease
    RemainAfterExit=yes
  owner: root:root
  permissions: '0644'
- path: /cisco/etc/vpp-server.conf
  owner: root:root
  permissions: '0644'
  content: |-
    set interface ip address GigabitEthernet0/4/0 10.0.0.6/30
    set interface state GigabitEthernet0/4/0 up
    set interface ip address GigabitEthernet0/5/0 10.0.0.10/30
    set interface state GigabitEthernet0/5/0 up
</entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/4/0" ipv4="10.0.0.6" netPrefixLenV4="30"/>
        <interface id="1" name="GigabitEthernet0/5/0" ipv4="10.0.0.10" netPrefixLenV4="30"/>
    </node>
    <connection dst="/virl:topology/virl:node[3]/virl:interface[1]" src="/virl:topology/virl:node[1]/virl:interface[1]"/>
    <connection dst="/virl:topology/virl:node[2]/virl:interface[1]" src="/virl:topology/virl:node[3]/virl:interface[2]"/>
</topology>