aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorMaciek Konstantynowicz <mkonstan@cisco.com>2016-06-16 13:04:53 +0100
committerMiroslav Miklus <mmiklus@cisco.com>2016-06-22 08:50:49 +0000
commit49e919071acc924f93baeea63537e88ffa79fa8e (patch)
treeea5370ee04fad7f8ee5df57ab2f7f492492c42a4
parentd9fe5a5323e5f904d461266d55dc8ee3857e6555 (diff)
Suite: performance.
Files: Long_IPv4_Intel-X520-DA2.robot, Long_IPv4_Cop_Intel-X520-DA2.robot, Long_Bridge_Domain_Intel-X520-DA2.robot, Long_Xconnect_Intel-X520-DA2.robot, Long_Xconnect_Dot1q_Intel-X520-DA2.robot, Long_IPv6_Intel-X520-DA2.robot, Long_IPv6_Cop_Intel-X520-DA2.robot. Updated test cases names and test cases documentation. Change-Id: I83262881a4b56512975c8ecc4518ddd2d7ec54b3 Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>
-rw-r--r--tests/suites/performance/Long_Bridge_Domain_Intel-X520-DA2.robot162
-rw-r--r--tests/suites/performance/Long_IPv4_Cop_Intel-X520-DA2.robot183
-rw-r--r--tests/suites/performance/Long_IPv4_Intel-X520-DA2.robot161
-rw-r--r--tests/suites/performance/Long_IPv6_Cop_Intel-X520-DA2.robot183
-rw-r--r--tests/suites/performance/Long_IPv6_Intel-X520-DA2.robot161
-rw-r--r--tests/suites/performance/Long_Xconnect_Dot1q_Intel-X520-DA2.robot187
-rw-r--r--tests/suites/performance/Long_Xconnect_Intel-X520-DA2.robot160
7 files changed, 679 insertions, 518 deletions
diff --git a/tests/suites/performance/Long_Bridge_Domain_Intel-X520-DA2.robot b/tests/suites/performance/Long_Bridge_Domain_Intel-X520-DA2.robot
index 3a3db169ee..106a7a7d17 100644
--- a/tests/suites/performance/Long_Bridge_Domain_Intel-X520-DA2.robot
+++ b/tests/suites/performance/Long_Bridge_Domain_Intel-X520-DA2.robot
@@ -21,19 +21,34 @@
| Suite Teardown | 3-node Performance Suite Teardown
| Test Setup | Setup all DUTs before test
| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs
-| Documentation | *Throughput search suite (based on RFC2544).*
+| Documentation | *RFC2544: Pkt throughput L2BD test cases*
| ...
-| ... | Test suite uses 3-node topology TG - DUT1 - DUT2 - TG, with one link
-| ... | between nodes. Traffic profile contain 2 L2 streams (1 stream per
-| ... | direction). Packets contain Ethernet header, IPv4 header,
-| ... | IP protocol=61 and random payload. Ethernet header MAC addresses are
-| ... | matching MAC addresses of the TG node.
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-
+| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with 2p10GE NIC
+| ... | X520 Niantic by Intel.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
+| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
+| ... | of packets transmitted. NDR and PDR are discovered for different
+| ... | Ethernet L2 frame sizes using either binary search or linear search
+| ... | algorithms with configured starting rate and final step that determines
+| ... | throughput measurement resolution. Test packets are generated by TG on
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
+| ... | payload. MAC addresses are matching MAC addresses of the TG node
+| ... | interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Test Cases ***
-| Find NDR by using RFC2544 binary search and 64B frames through bridge domain in 3-node topology
+| TC01: 64B NDR binary search - DUT L2BD - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with non drop rate for 64B frames by using
-| | ... | binary search with threshold 0.1Mpps.
+| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
+| | ... | using binary search start at 10GE linerate, step 100kpps.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
| | ${framesize}= | Set Variable | 64
| | ${min_rate}= | Set Variable | 100000
@@ -51,11 +66,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR by using RFC2544 binary search and 64B frames through bridge domain in 3-node topology
+| TC02: 64B PDR binary search - DUT L2BD - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with partial drop rate for 64B frames by using
-| | ... | binary search with threshold 0.1Mpps. Loss acceptance is set to 0.5
-| | ... | percent of transmitted packets.
+| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
+| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
| | ${framesize}= | Set Variable | 64
| | ${min_rate}= | Set Variable | 100000
@@ -75,10 +90,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR by using RFC2544 binary search and 1518B frames through bridge domain in 3-node topology
+| TC03: 1518B NDR binary search - DUT L2BD - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with non drop rate for 1518B frames by using
-| | ... | binary search with threshold 10,000pps.
+| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
+| | ... | using binary search start at 10GE linerate, step 10kpps.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -96,11 +112,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR by using RFC2544 binary search and 1518B frames through bridge domain in 3-node topology
+| TC04: 1518B PDR binary search - DUT L2BD - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with partial drop rate for 1518B frames by using
-| | ... | binary search with threshold 10,000pps. Loss acceptance is set to 0.5
-| | ... | percent of transmitted packets.
+| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
+| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -120,10 +136,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR by using RFC2544 binary search and 9000B frames through bridge domain in 3-node topology
+| TC05: 9000B NDR binary search - DUT L2BD - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with non drop rate for 9000B frames by using
-| | ... | binary search with threshold of 5,000pps.
+| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
+| | ... | using binary search start at 10GE linerate, step 5kpps.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -140,11 +157,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR by using RFC2544 binary search and 9000B frames through bridge domain in 3-node topology
+| TC06: 9000B PDR binary search - DUT L2BD - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with partial drop rate for 9000B frames by using
-| | ... | binary search with threshold of 5,000pps. Loss acceptance is set to
-| | ... | 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
+| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -163,10 +180,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 64B frames through bridge domain in 3-node topology
+| TC07: 64B NDR binary search - DUT L2BD - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with non drop rate for 64B frames by using
-| | ... | binary search with threshold 0.1Mpps.
+| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
+| | ... | using binary search start at 10GE linerate, step 100kpps.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 64
| | ${min_rate}= | Set Variable | 100000
@@ -184,11 +202,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 64B frames through bridge domain in 3-node topology
+| TC08: 64B PDR binary search - DUT L2BD - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with partial drop rate for 64B frames by
-| | ... | using binary search with threshold 0.1Mpps. Loss acceptance is set to
-| | ... | 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
+| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 64
| | ${min_rate}= | Set Variable | 100000
@@ -208,10 +226,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 1518B frames through bridge domain in 3-node topology
+| TC09: 1518B NDR binary search - DUT L2BD - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with non drop rate for 1518B frames by
-| | ... | using binary search with threshold 10,000pps.
+| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
+| | ... | using binary search start at 10GE linerate, step 10kpps.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -229,11 +248,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 1518B frames through bridge domain in 3-node topology
+| TC10: 1518B PDR binary search - DUT L2BD - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with partial drop rate for 1518B frames by
-| | ... | using binary search with threshold 10,000pps. Loss acceptance is set
-| | ... | to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
+| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -253,10 +272,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 9000B frames through bridge domain in 3-node topology
+| TC11: 9000B NDR binary search - DUT L2BD - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with non drop rate for 9000B frames by
-| | ... | using binary search with threshold 5,000pps.
+| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
+| | ... | using binary search start at 10GE linerate, step 5kpps.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -273,11 +293,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 9000B frames through bridge domain in 3-node topology
+| TC12: 9000B PDR binary search - DUT L2BD - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with partial drop rate for 9000B frames by
-| | ... | using binary search with threshold 5,000pps. Loss acceptance is set
-| | ... | to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
+| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -296,10 +316,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 64B frames through bridge domain in 3-node topology
+| TC13: 64B NDR binary search - DUT L2BD - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 64B
-| | ... | frames by using binary search with threshold 0.1Mpps.
+| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames
+| | ... | using binary search start at 10GE linerate, step 100kpps.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 64
| | ${min_rate}= | Set Variable | 100000
@@ -317,11 +338,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 64B frames through bridge domain in 3-node topology
+| TC14: 64B PDR binary search - DUT L2BD - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 64B
-| | ... | frames by using binary search with threshold 0.1Mpps. Loss acceptance
-| | ... | is set to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames
+| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 64
| | ${min_rate}= | Set Variable | 100000
@@ -341,11 +362,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-
-| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 1518B frames through bridge domain in 3-node topology
+| TC15: 1518B NDR binary search - DUT L2BD - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 1518B
-| | ... | frames by using binary search with threshold 10,000pps.
+| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 1518 Byte frames
+| | ... | using binary search start at 10GE linerate, step 10kpps.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -363,11 +384,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 1518B frames through bridge domain in 3-node topology
+| TC16: 1518B PDR binary search - DUT L2BD - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 1518B
-| | ... | frames by using binary search with threshold 10,000pps. Loss
-| | ... | acceptance is set to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 1518 Byte frames
+| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -387,10 +408,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 9000B frames through bridge domain in 3-node topology
+| TC17: 9000B NDR binary search - DUT L2BD - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 9000B
-| | ... | frames by using binary search with threshold 5,000pps.
+| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 9000 Byte frames
+| | ... | using binary search start at 10GE linerate, step 5kpps.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -407,11 +429,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 9000B frames through bridge domain in 3-node topology
+| TC18: 9000B PDR binary search - DUT L2BD - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 9000B
-| | ... | frames by using binary search with threshold 5,000pps. Loss
-| | ... | acceptance is set to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 9000 Byte frames
+| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
diff --git a/tests/suites/performance/Long_IPv4_Cop_Intel-X520-DA2.robot b/tests/suites/performance/Long_IPv4_Cop_Intel-X520-DA2.robot
index ca43e610d2..47a22fd686 100644
--- a/tests/suites/performance/Long_IPv4_Cop_Intel-X520-DA2.robot
+++ b/tests/suites/performance/Long_IPv4_Cop_Intel-X520-DA2.robot
@@ -23,22 +23,36 @@
| Suite Teardown | 3-node Performance Suite Teardown
| Test Setup | Setup all DUTs before test
| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs
-| Documentation | *Throughput search suite (based on RFC2544).*
+| Documentation | *RFC2544: Pkt throughput IPv4 whitelist test cases*
| ...
-| ... | Test suite uses 3-node topology TG - DUT1 - DUT2 - TG, with one link
-| ... | between nodes. Traffic profile contain 2 L3 streams (1 stream per
-| ... | direction). Packets contain Ethernet header, IPv4 header,
-| ... | IP protocol=61 and random payload. Ethernet header MAC addresses are
-| ... | matching MAC addresses of the TG node. COP (whitelist) is applied
-| ... | on link between TG - DUT1 and DUT2 - TG. Additional ipv4 fib table with
-| ... | index 1 is created and single entry added to permit all the
-| ... | traffic (subnet /24).
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
+| ... | routing, two static IPv4 /24 routes and IPv4 COP security whitelist
+| ... | ingress /24 filter entries applied on links TG - DUT1 and DUT2 - TG.
+| ... | DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
+| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
+| ... | of packets transmitted. NDR and PDR are discovered for different
+| ... | Ethernet L2 frame sizes using either binary search or linear search
+| ... | algorithms with configured starting rate and final step that determines
+| ... | throughput measurement resolution. Test packets are generated by TG on
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
+| ... | payload. MAC addresses are matching MAC addresses of the TG node
+| ... | interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Test Cases ***
-| Find NDR by using RFC2544 binary search and 64B frames through IPv4 forwarding with COP in 3-node topology
+| TC01: 64B NDR binary search - DUT IPv4 whitelist - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with non drop rate for 64B frames by using
-| | ... | binary search with threshold 0.1Mpps.
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
+| | ... | for 64 Byte frames using binary search start at 10GE linerate,
+| | ... | step 100kpps.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
| | ${framesize}= | Set Variable | 64
| | ${min_rate}= | Set Variable | 100000
@@ -62,11 +76,12 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR by using RFC2544 binary search and 64B frames through IPv4 forwarding with COP in 3-node topology
+| TC02: 64B PDR binary search - DUT IPv4 whitelist - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with partial drop rate for 64B frames by using
-| | ... | binary search with threshold 0.1Mpps. Loss acceptance is set to 0.5
-| | ... | percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
+| | ... | for 64 Byte frames using binary search start at 10GE linerate,
+| | ... | step 100kpps, LT=0.5%.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
| | ${framesize}= | Set Variable | 64
| | ${min_rate}= | Set Variable | 100000
@@ -92,10 +107,12 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR by using RFC2544 binary search and 1518B frames through IPv4 forwarding with COP in 3-node topology
+| TC03: 1518B NDR binary search - DUT IPv4 whitelist - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with non drop rate for 1518B frames by using
-| | ... | binary search with threshold 10,000pps.
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
+| | ... | for 1518 Byte frames using binary search start at 10GE linerate,
+| | ... | step 10kpps.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -119,11 +136,12 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR by using RFC2544 binary search and 1518B frames through IPv4 forwarding with COP in 3-node topology
+| TC04: 1518B PDR binary search - DUT IPv4 whitelist - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with partial drop rate for 1518B frames by using
-| | ... | binary search with threshold 10,000pps. Loss acceptance is set to 0.5
-| | ... | percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
+| | ... | for 1518 Byte frames using binary search start at 10GE linerate,
+| | ... | step 10kpps, LT=0.5%.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -149,10 +167,12 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR by using RFC2544 binary search and 9000B frames through IPv4 forwarding with COP in 3-node topology
+| TC05: 9000B NDR binary search - DUT IPv4 whitelist - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with non drop rate for 9000B frames by using
-| | ... | binary search with threshold 5,000pps.
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
+| | ... | for 9000 Byte frames using binary search start at 10GE linerate,
+| | ... | step 5kpps.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -175,11 +195,12 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR by using RFC2544 binary search and 9000B frames through IPv4 forwarding with COP in 3-node topology
+| TC06: 9000B PDR binary search - DUT IPv4 whitelist - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with partial drop rate for 9000B frames by using
-| | ... | binary search with threshold of 5,000pps. Loss acceptance is set to
-| | ... | 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
+| | ... | for 9000 Byte frames using binary search start at 10GE linerate,
+| | ... | step 5kpps, LT=0.5%.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -204,10 +225,12 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 64B frames through IPv4 forwarding with COP in 3-node topology
+| TC07: 64B NDR binary search - DUT IPv4 whitelist - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with non drop rate for 64B frames by using
-| | ... | binary search with threshold 0.1Mpps.
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR
+| | ... | for 64 Byte frames using binary search start at 10GE linerate,
+| | ... | step 100kpps.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 64
| | ${min_rate}= | Set Variable | 100000
@@ -231,11 +254,12 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 64B frames through IPv4 forwarding with COP in 3-node topology
+| TC08: 64B PDR binary search - DUT IPv4 whitelist - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with partial drop rate for 64B frames by
-| | ... | using binary search with threshold 0.1Mpps. Loss acceptance is set to
-| | ... | 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR
+| | ... | for 64 Byte frames using binary search start at 10GE linerate,
+| | ... | step 100kpps, LT=0.5%.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 64
| | ${min_rate}= | Set Variable | 100000
@@ -261,10 +285,12 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 1518B frames through IPv4 forwarding with COP in 3-node topology
+| TC09: 1518B NDR binary search - DUT IPv4 whitelist - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with non drop rate for 1518B frames by
-| | ... | using binary search with threshold 10,000pps.
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR
+| | ... | for 1518 Byte frames using binary search start at 10GE linerate,
+| | ... | step 10kpps.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -288,11 +314,12 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 1518B frames through IPv4 forwarding with COP in 3-node topology
+| TC10: 1518B PDR binary search - DUT IPv4 whitelist - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with partial drop rate for 1518B frames by
-| | ... | using binary search with threshold 10,000pps. Loss acceptance is set
-| | ... | to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR
+| | ... | for 1518 Byte frames using binary search start at 10GE linerate,
+| | ... | step 10kpps, LT=0.5%.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -318,10 +345,12 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 9000B frames through IPv4 forwarding with COP in 3-node topology
+| TC11: 9000B NDR binary search - DUT IPv4 whitelist - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with non drop rate for 9000B frames by
-| | ... | using binary search with threshold 5,000pps.
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR
+| | ... | for 9000 Byte frames using binary search start at 10GE linerate,
+| | ... | step 5kpps.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -344,11 +373,12 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 9000B frames through IPv4 forwarding with COP in 3-node topology
+| TC12: 9000B PDR binary search - DUT IPv4 whitelist - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with partial drop rate for 9000B frames by
-| | ... | using binary search with threshold 5,000pps. Loss acceptance is set
-| | ... | to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR
+| | ... | for 9000 Byte frames using binary search start at 10GE linerate,
+| | ... | step 5kpps, LT=0.5%.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -373,10 +403,12 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 64B frames through IPv4 forwarding with COP in 3-node topology
+| TC13: 64B NDR binary search - DUT IPv4 whitelist - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 64B
-| | ... | frames by using binary search with threshold 0.1Mpps.
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find NDR
+| | ... | for 64 Byte frames using binary search start at 10GE linerate,
+| | ... | step 100kpps.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 64
| | ${min_rate}= | Set Variable | 100000
@@ -400,11 +432,12 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 64B frames through IPv4 forwarding with COP in 3-node topology
+| TC14: 64B PDR binary search - DUT IPv4 whitelist - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 64B
-| | ... | frames by using binary search with threshold 0.1Mpps. Loss acceptance
-| | ... | is set to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find PDR
+| | ... | for 64 Byte frames using binary search start at 10GE linerate,
+| | ... | step 100kpps, LT=0.5%.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 64
| | ${min_rate}= | Set Variable | 100000
@@ -430,10 +463,12 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 1518B frames through IPv4 forwarding with COP in 3-node topology
+| TC15: 1518B NDR binary search - DUT IPv4 whitelist - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 1518B
-| | ... | frames by using binary search with threshold 10,000pps.
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find NDR
+| | ... | for 1518 Byte frames using binary search start at 10GE linerate,
+| | ... | step 10kpps.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -457,11 +492,12 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 1518B frames through IPv4 forwarding with COP in 3-node topology
+| TC16: 1518B PDR binary search - DUT IPv4 whitelist - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 1518B
-| | ... | frames by using binary search with threshold 10,000pps. Loss
-| | ... | acceptance is set to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find PDR
+| | ... | for 1518 Byte frames using binary search start at 10GE linerate,
+| | ... | step 10kpps, LT=0.5%.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -487,10 +523,12 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 4 cores and rxqueues 2 by using RFC2544 linear search and 9000B frames through IPv4 forwarding with COP in 3-node topology
+| TC17: 9000B NDR binary search - DUT IPv4 whitelist - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 9000B
-| | ... | frames by using binary search with threshold 5,000pps.
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find NDR
+| | ... | for 9000 Byte frames using binary search start at 10GE linerate,
+| | ... | step 5kpps.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -513,11 +551,12 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 4 cores and rxqueues 2 by using RFC2544 linear search and 9000B frames through IPv4 forwarding with COP in 3-node topology
+| TC18: 9000B PDR binary search - DUT IPv4 whitelist - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 9000B
-| | ... | frames by using binary search with threshold 5,000pps. Loss
-| | ... | acceptance is set to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find PDR
+| | ... | for 9000 Byte frames using binary search start at 10GE linerate,
+| | ... | step 5kpps, LT=0.5%.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
diff --git a/tests/suites/performance/Long_IPv4_Intel-X520-DA2.robot b/tests/suites/performance/Long_IPv4_Intel-X520-DA2.robot
index 8b80aabcff..16e1797a82 100644
--- a/tests/suites/performance/Long_IPv4_Intel-X520-DA2.robot
+++ b/tests/suites/performance/Long_IPv4_Intel-X520-DA2.robot
@@ -25,19 +25,34 @@
| Suite Teardown | 3-node Performance Suite Teardown
| Test Setup | Setup all DUTs before test
| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs
-| Documentation | *Throughput search suite (based on RFC2544).*
+| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases*
| ...
-| ... | Test suite uses 3-node topology TG - DUT1 - DUT2 - TG, with one link
-| ... | between nodes. Traffic profile contain 2 L3 streams (1 stream per
-| ... | direction). Packets contain Ethernet header, IPv4 header,
-| ... | IP protocol=61 and random payload. Ethernet header MAC addresses are
-| ... | matching MAC addresses of the TG node.
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
+| ... | routing and two static IPv4 /24 route entries. DUT1 and DUT2 tested with
+| ... | 2p10GE NIC X520 Niantic by Intel.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
+| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
+| ... | of packets transmitted. NDR and PDR are discovered for different
+| ... | Ethernet L2 frame sizes using either binary search or linear search
+| ... | algorithms with configured starting rate and final step that determines
+| ... | throughput measurement resolution. Test packets are generated by TG on
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
+| ... | payload. MAC addresses are matching MAC addresses of the TG node
+| ... | interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Test Cases ***
-| Find NDR by using RFC2544 binary search and 64B frames through IPv4 forwarding in 3-node topology
+| TC01: 64B NDR binary search - DUT IPv4 - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with non drop rate for 64B frames by using
-| | ... | binary search with threshold 0.1Mpps.
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
+| | ... | using binary search start at 10GE linerate, step 100kpps.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
| | ${framesize}= | Set Variable | 64
| | ${min_rate}= | Set Variable | 100000
@@ -55,11 +70,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR by using RFC2544 binary search and 64B frames through IPv4 forwarding in 3-node topology
+| TC02: 64B PDR binary search - DUT IPv4 - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with partial drop rate for 64B frames by using
-| | ... | binary search with threshold 0.1Mpps. Loss acceptance is set to 0.5
-| | ... | percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
+| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
| | ${framesize}= | Set Variable | 64
| | ${min_rate}= | Set Variable | 100000
@@ -79,10 +94,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR by using RFC2544 binary search and 1518B frames through IPv4 forwarding in 3-node topology
+| TC03: 1518B NDR binary search - DUT IPv4 - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with non drop rate for 1518B frames by using
-| | ... | binary search with threshold 10,000pps.
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
+| | ... | using binary search start at 10GE linerate, step 10kpps.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -100,11 +116,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR by using RFC2544 binary search and 1518B frames through IPv4 forwarding in 3-node topology
+| TC04: 1518B PDR binary search - DUT IPv4 - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with partial drop rate for 1518B frames by using
-| | ... | binary search with threshold 10,000pps. Loss acceptance is set to 0.5
-| | ... | percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
+| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -124,10 +140,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR by using RFC2544 binary search and 9000B frames through IPv4 forwarding in 3-node topology
+| TC05: 9000B NDR binary search - DUT IPv4 - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with non drop rate for 9000B frames by using
-| | ... | binary search with threshold 5,000pps.
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
+| | ... | using binary search start at 10GE linerate, step 5kpps.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -144,11 +161,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR by using RFC2544 binary search and 9000B frames through IPv4 forwarding in 3-node topology
+| TC06: 9000B PDR binary search - DUT IPv4 - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with partial drop rate for 9000B frames by using
-| | ... | binary search with threshold of 5,000pps. Loss acceptance is set to
-| | ... | 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
+| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -167,10 +184,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 64B frames through IPv4 forwarding in 3-node topology
+| TC07: 64B NDR binary search - DUT IPv4 - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with non drop rate for 64B frames by using
-| | ... | binary search with threshold 0.1Mpps.
+| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
+| | ... | using binary search start at 10GE linerate, step 100kpps.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 64
| | ${min_rate}= | Set Variable | 100000
@@ -188,11 +206,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 64B frames through IPv4 forwarding in 3-node topology
+| TC08: 64B PDR binary search - DUT IPv4 - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with partial drop rate for 64B frames by
-| | ... | using binary search with threshold 0.1Mpps. Loss acceptance is set to
-| | ... | 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
+| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 64
| | ${min_rate}= | Set Variable | 100000
@@ -212,10 +230,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 1518B frames through IPv4 forwarding in 3-node topology
+| TC09: 1518B NDR binary search - DUT IPv4 - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with non drop rate for 1518B frames by
-| | ... | using binary search with threshold 10,000pps.
+| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
+| | ... | using binary search start at 10GE linerate, step 10kpps.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -233,11 +252,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 1518B frames through IPv4 forwarding in 3-node topology
+| TC10: 1518B PDR binary search - DUT IPv4 - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with partial drop rate for 1518B frames by
-| | ... | using binary search with threshold 10,000pps. Loss acceptance is set
-| | ... | to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
+| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -257,10 +276,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 9000B frames through IPv4 forwarding in 3-node topology
+| TC11: 9000B NDR binary search - DUT IPv4 - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with non drop rate for 9000B frames by
-| | ... | using binary search with threshold 5,000pps.
+| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
+| | ... | using binary search start at 10GE linerate, step 5kpps.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -277,11 +297,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 9000B frames through IPv4 forwarding in 3-node topology
+| TC12: 9000B PDR binary search - DUT IPv4 - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with partial drop rate for 9000B frames by
-| | ... | using binary search with threshold 5,000pps. Loss acceptance is set
-| | ... | to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
+| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -300,10 +320,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 64B frames through IPv4 forwarding in 3-node topology
+| TC13: 64B NDR binary search - DUT IPv4 - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 64B
-| | ... | frames by using binary search with threshold 0.1Mpps.
+| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames
+| | ... | using binary search start at 10GE linerate, step 100kpps.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 64
| | ${min_rate}= | Set Variable | 100000
@@ -321,11 +342,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 64B frames through IPv4 forwarding in 3-node topology
+| TC14: 64B PDR binary search - DUT IPv4 - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 64B
-| | ... | frames by using binary search with threshold 0.1Mpps. Loss acceptance
-| | ... | is set to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames
+| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 64
| | ${min_rate}= | Set Variable | 100000
@@ -345,10 +366,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 1518B frames through IPv4 forwarding in 3-node topology
+| TC15: 1518B NDR binary search - DUT IPv4 - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 1518B
-| | ... | frames by using binary search with threshold 10,000pps.
+| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 1518 Byte frames
+| | ... | using binary search start at 10GE linerate, step 10kpps.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -366,11 +388,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 1518B frames through IPv4 forwarding in 3-node topology
+| TC16: 1518B PDR binary search - DUT IPv4 - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 1518B
-| | ... | frames by using binary search with threshold 10,000pps. Loss
-| | ... | acceptance is set to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 1518 Byte frames
+| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -390,10 +412,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 4 cores and rxqueues 2 by using RFC2544 linear search and 9000B frames through IPv4 forwarding in 3-node topology
+| TC17: 9000B NDR binary search - DUT IPv4 - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 9000B
-| | ... | frames by using binary search with threshold 5,000pps.
+| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 9000 Byte frames
+| | ... | using binary search start at 10GE linerate, step 5kpps.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -410,11 +433,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 4 cores and rxqueues 2 by using RFC2544 linear search and 9000B frames through IPv4 forwarding in 3-node topology
+| TC18: 9000B PDR binary search - DUT IPv4 - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 9000B
-| | ... | frames by using binary search with threshold 5,000pps. Loss
-| | ... | acceptance is set to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 9000 Byte frames
+| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
diff --git a/tests/suites/performance/Long_IPv6_Cop_Intel-X520-DA2.robot b/tests/suites/performance/Long_IPv6_Cop_Intel-X520-DA2.robot
index d8c57646d7..40e3291721 100644
--- a/tests/suites/performance/Long_IPv6_Cop_Intel-X520-DA2.robot
+++ b/tests/suites/performance/Long_IPv6_Cop_Intel-X520-DA2.robot
@@ -21,21 +21,36 @@
| Suite Teardown | 3-node Performance Suite Teardown
| Test Setup | Setup all DUTs before test
| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs
-| Documentation | *Throughput search suite (based on RFC2544).*
+| Documentation | *RFC2544: Pkt throughput IPv6 whitelist test cases*
| ...
-| ... | Test suite uses 3-node topology TG - DUT1 - DUT2 - TG, with one link
-| ... | between nodes. Traffic profile contain 2 L3 streams (1 stream per
-| ... | direction). Packets contain Ethernet header, IPv6 header, and random
-| ... | payload. Ethernet header MAC addresses are matching MAC addresses
-| ... | of the TG node. COP (whitelist) is applied on link between TG - DUT1
-| ... | and DUT2 - TG. Additional ipv6 fib table with index 1 is created and
-| ... | single entry added to permit all the traffic (subnet /64).
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6
+| ... | routing, two static IPv6 /64 routes and IPv6 COP security whitelist
+| ... | ingress /64 filter entries applied on links TG - DUT1 and DUT2 - TG.
+| ... | DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
+| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
+| ... | of packets transmitted. NDR and PDR are discovered for different
+| ... | Ethernet L2 frame sizes using either binary search or linear search
+| ... | algorithms with configured starting rate and final step that determines
+| ... | throughput measurement resolution. Test packets are generated by TG on
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets
+| ... | containing Ethernet header, IPv6 header and static
+| ... | payload. MAC addresses are matching MAC addresses of the TG node
+| ... | interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Test Cases ***
-| Find NDR by using RFC2544 binary search and 78B frames through IPv6 forwarding with COP in 3-node topology
+| TC01: 78B NDR binary search - DUT IPv6 whitelist - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with non drop rate for 78B frames by using
-| | ... | binary search with threshold 0.1Mpps.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
+| | ... | for 78 Byte frames using binary search start at 10GE linerate,
+| | ... | step 100kpps.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
| | ${framesize}= | Set Variable | 78
| | ${min_rate}= | Set Variable | 100000
@@ -59,11 +74,12 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR by using RFC2544 binary search and 78B frames through IPv6 forwarding with COP in 3-node topology
+| TC02: 78B PDR binary search - DUT IPv6 whitelist - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with partial drop rate for 78B frames by using
-| | ... | binary search with threshold 0.1Mpps. Loss acceptance is set to 0.5
-| | ... | percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
+| | ... | for 78 Byte frames using binary search start at 10GE linerate,
+| | ... | step 100kpps, LT=0.5%.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
| | ${framesize}= | Set Variable | 78
| | ${min_rate}= | Set Variable | 100000
@@ -89,10 +105,12 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR by using RFC2544 binary search and 1518B frames through IPv6 forwarding with COP in 3-node topology
+| TC03: 1518B NDR binary search - DUT IPv6 whitelist - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with non drop rate for 1518B frames by using
-| | ... | binary search with threshold 10,000pps.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
+| | ... | for 1518 Byte frames using binary search start at 10GE linerate,
+| | ... | step 10kpps.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -116,11 +134,12 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR by using RFC2544 binary search and 1518B frames through IPv6 forwarding with COP in 3-node topology
+| TC04: 1518B PDR binary search - DUT IPv6 whitelist - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with partial drop rate for 1518B frames by using
-| | ... | binary search with threshold 10,000pps. Loss acceptance is set to 0.5
-| | ... | percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
+| | ... | for 1518 Byte frames using binary search start at 10GE linerate,
+| | ... | step 10kpps, LT=0.5%.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -146,10 +165,12 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR by using RFC2544 binary search and 9000B frames through IPv6 forwarding with COP in 3-node topology
+| TC05: 9000B NDR binary search - DUT IPv6 whitelist - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with non drop rate for 9000B frames by using
-| | ... | binary search with threshold 5,000pps.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
+| | ... | for 9000 Byte frames using binary search start at 10GE linerate,
+| | ... | step 5kpps.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -172,11 +193,12 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR by using RFC2544 binary search and 9000B frames through IPv6 forwarding with COP in 3-node topology
+| TC06: 9000B PDR binary search - DUT IPv6 whitelist - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with partial drop rate for 9000B frames by using
-| | ... | binary search with threshold of 5,000pps. Loss acceptance is set to
-| | ... | 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
+| | ... | for 9000 Byte frames using binary search start at 10GE linerate,
+| | ... | step 5kpps, LT=0.5%.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -201,10 +223,12 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 78B frames through IPv6 forwarding with COP in 3-node topology
+| TC07: 78B NDR binary search - DUT IPv6 whitelist - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with non drop rate for 78B frames by using
-| | ... | binary search with threshold 0.1Mpps.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR
+| | ... | for 78 Byte frames using binary search start at 10GE linerate,
+| | ... | step 100kpps.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 78
| | ${min_rate}= | Set Variable | 100000
@@ -228,11 +252,12 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 78B frames through IPv6 forwarding with COP in 3-node topology
+| TC08: 78B PDR binary search - DUT IPv6 whitelist - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with partial drop rate for 78B frames by
-| | ... | using binary search with threshold 10,000pps. Loss acceptance is set
-| | ... | to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR
+| | ... | for 78 Byte frames using binary search start at 10GE linerate,
+| | ... | step 100kpps, LT=0.5%.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 78
| | ${min_rate}= | Set Variable | 100000
@@ -258,10 +283,12 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 1518B frames through IPv6 forwarding with COP in 3-node topology
+| TC09: 1518B NDR binary search - DUT IPv6 whitelist - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with non drop rate for 1518B frames by
-| | ... | using binary search with threshold 10,000pps.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR
+| | ... | for 1518 Byte frames using binary search start at 10GE linerate,
+| | ... | step 10kpps.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -285,11 +312,12 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 1518B frames through IPv6 forwarding with COP in 3-node topology
+| TC10: 1518B PDR binary search - DUT IPv6 whitelist - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with partial drop rate for 1518B frames by
-| | ... | using binary search with threshold 10,000pps. Loss acceptance is set
-| | ... | to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR
+| | ... | for 1518 Byte frames using binary search start at 10GE linerate,
+| | ... | step 10kpps, LT=0.5%.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -315,10 +343,12 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 9000B frames through IPv6 forwarding with COP in 3-node topology
+| TC11: 9000B NDR binary search - DUT IPv6 whitelist - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with non drop rate for 9000B frames by
-| | ... | using binary search with threshold 5,000pps.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR
+| | ... | for 9000 Byte frames using binary search start at 10GE linerate,
+| | ... | step 5kpps.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -341,11 +371,12 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 9000B frames through IPv6 forwarding with COP in 3-node topology
+| TC12: 9000B PDR binary search - DUT IPv6 whitelist - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with partial drop rate for 9000B frames by
-| | ... | using binary search with threshold 5,000pps. Loss acceptance is set
-| | ... | to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR
+| | ... | for 9000 Byte frames using binary search start at 10GE linerate,
+| | ... | step 5kpps, LT=0.5%.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -370,10 +401,12 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 78B frames through IPv6 forwarding with COP in 3-node topology
+| TC13: 78B NDR binary search - DUT IPv6 whitelist - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 78B
-| | ... | frames by using binary search with threshold 0.1Mpps.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find NDR
+| | ... | for 78 Byte frames using binary search start at 10GE linerate,
+| | ... | step 100kpps.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 78
| | ${min_rate}= | Set Variable | 100000
@@ -397,11 +430,12 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 78B frames through IPv6 forwarding with COP in 3-node topology
+| TC14: 78B PDR binary search - DUT IPv6 whitelist - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 78B
-| | ... | frames by using binary search with threshold 0.1Mpps. Loss acceptance
-| | ... | is set to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find PDR
+| | ... | for 78 Byte frames using binary search start at 10GE linerate,
+| | ... | step 100kpps, LT=0.5%.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 78
| | ${min_rate}= | Set Variable | 100000
@@ -427,10 +461,12 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 1518B frames through IPv6 forwarding with COP in 3-node topology
+| TC15: 1518B NDR binary search - DUT IPv6 whitelist - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 1518B
-| | ... | frames by using binary search with threshold 10,000pps.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find NDR
+| | ... | for 1518 Byte frames using binary search start at 10GE linerate,
+| | ... | step 10kpps.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -454,11 +490,12 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 1518B frames through IPv6 forwarding with COP in 3-node topology
+| TC16: 1518B PDR binary search - DUT IPv6 whitelist - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 1518B
-| | ... | frames by using binary search with threshold 10,000pps. Loss
-| | ... | acceptance is set to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find PDR
+| | ... | for 1518 Byte frames using binary search start at 10GE linerate,
+| | ... | step 10kpps, LT=0.5%.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -484,11 +521,12 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 9000B frames through IPv6 forwarding with COP in 3-node topology
+| TC17: 9000B NDR binary search - DUT IPv6 whitelist - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 9000B
-| | ... | frames by using binary search starting at 138,580pps, stepping down
-| | ... | with step of 5,000pps.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find NDR
+| | ... | for 9000 Byte frames using binary search start at 10GE linerate,
+| | ... | step 5kpps.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -511,11 +549,12 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 9000B frames through IPv6 forwarding with COP in 3-node topology
+| TC18: 9000B PDR binary search - DUT IPv6 whitelist - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 9000B
-| | ... | frames by using binary search with threshold 5,000pps. Loss
-| | ... | acceptance is set to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find PDR
+| | ... | for 9000 Byte frames using binary search start at 10GE linerate,
+| | ... | step 5kpps, LT=0.5%.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
diff --git a/tests/suites/performance/Long_IPv6_Intel-X520-DA2.robot b/tests/suites/performance/Long_IPv6_Intel-X520-DA2.robot
index c0eb7f59f7..4d06528b30 100644
--- a/tests/suites/performance/Long_IPv6_Intel-X520-DA2.robot
+++ b/tests/suites/performance/Long_IPv6_Intel-X520-DA2.robot
@@ -20,19 +20,33 @@
| Suite Teardown | 3-node Performance Suite Teardown
| Test Setup | Setup all DUTs before test
| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs
-| Documentation | *Throughput search suite (based on RFC2544).*
+| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases*
| ...
-| ... | Test suite uses 3-node topology TG - DUT1 - DUT2 - TG, with one link
-| ... | between nodes. Traffic profile contain 2 L3 streams (1 stream per
-| ... | direction). Packets contain Ethernet header, IPv6 header, and random
-| ... | payload. Ethernet header MAC addresses are matching MAC addresses
-| ... | of the TG node.
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6
+| ... | routing and two static IPv6 /64 route entries. DUT1 and DUT2 tested with
+| ... | 2p10GE NIC X520 Niantic by Intel.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
+| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
+| ... | of packets transmitted. NDR and PDR are discovered for different
+| ... | Ethernet L2 frame sizes using either binary search or linear search
+| ... | algorithms with configured starting rate and final step that determines
+| ... | throughput measurement resolution. Test packets are generated by TG on
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets
+| ... | containing Ethernet header, IPv6 header and static payload.
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Test Cases ***
-| Find NDR by using RFC2544 binary search and 78B frames through IPv6 forwarding in 3-node topology
+| TC01: 78B NDR binary search - DUT IPv6 - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with non drop rate for 78B frames by using
-| | ... | binary search with threshold 0.1Mpps.
+| | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 78 Byte frames
+| | ... | using binary search start at 10GE linerate, step 100kpps.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
| | ${framesize}= | Set Variable | 78
| | ${min_rate}= | Set Variable | 100000
@@ -50,11 +64,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR by using RFC2544 binary search and 78B frames through IPv6 forwarding in 3-node topology
+| TC02: 78B PDR binary search - DUT IPv6 - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with partial drop rate for 78B frames by using
-| | ... | binary search with threshold 0.1Mpps. Loss acceptance is set to 0.5
-| | ... | percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 78 Byte frames
+| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
| | ${framesize}= | Set Variable | 78
| | ${min_rate}= | Set Variable | 100000
@@ -74,10 +88,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR by using RFC2544 binary search and 1518B frames through IPv6 forwarding in 3-node topology
+| TC03: 1518B NDR binary search - DUT IPv6 - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with non drop rate for 1518B frames by using
-| | ... | binary search with threshold 10,000pps.
+| | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
+| | ... | using binary search start at 10GE linerate, step 10kpps.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -95,11 +110,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR by using RFC2544 binary search and 1518B frames through IPv6 forwarding in 3-node topology
+| TC04: 1518B PDR binary search - DUT IPv6 - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with partial drop rate for 1518B frames by using
-| | ... | binary search with threshold 10,000pps. Loss acceptance is set to 0.5
-| | ... | percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
+| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -119,10 +134,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR by using RFC2544 binary search and 9000B frames through IPv6 forwarding in 3-node topology
+| TC05: 9000B NDR binary search - DUT IPv6 - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with non drop rate for 9000B frames by using
-| | ... | binary search with threshold 5,000pps.
+| | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
+| | ... | using binary search start at 10GE linerate, step 5kpps.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -139,11 +155,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR by using RFC2544 binary search and 9000B frames through IPv6 forwarding in 3-node topology
+| TC06: 9000B PDR binary search - DUT IPv6 - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with partial drop rate for 9000B frames by using
-| | ... | binary search with threshold of 5,000pps. Loss acceptance is set to
-| | ... | 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
+| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -162,10 +178,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 78B frames through IPv6 forwarding in 3-node topology
+| TC07: 78B NDR binary search - DUT IPv6 - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with non drop rate for 78B frames by using
-| | ... | binary search with threshold 0.1Mpps.
+| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 78 Byte frames
+| | ... | using binary search start at 10GE linerate, step 100kpps.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 78
| | ${min_rate}= | Set Variable | 100000
@@ -183,11 +200,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 78B frames through IPv6 forwarding in 3-node topology
+| TC08: 78B PDR binary search - DUT IPv6 - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with partial drop rate for 78B frames by
-| | ... | using binary search with threshold 10,000pps. Loss acceptance is set
-| | ... | to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 78 Byte frames
+| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 78
| | ${min_rate}= | Set Variable | 100000
@@ -207,10 +224,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 1518B frames through IPv6 forwarding in 3-node topology
+| TC09: 1518B NDR binary search - DUT IPv6 - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with non drop rate for 1518B frames by
-| | ... | using binary search with threshold 10,000pps.
+| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
+| | ... | using binary search start at 10GE linerate, step 10kpps.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -228,11 +246,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 1518B frames through IPv6 forwarding in 3-node topology
+| TC10: 1518B PDR binary search - DUT IPv6 - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with partial drop rate for 1518B frames by
-| | ... | using binary search with threshold 10,000pps. Loss acceptance is set
-| | ... | to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
+| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -252,10 +270,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 9000B frames through IPv6 forwarding in 3-node topology
+| TC11: 9000B NDR binary search - DUT IPv6 - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with non drop rate for 9000B frames by
-| | ... | using binary search with threshold 5,000pps.
+| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
+| | ... | using binary search start at 10GE linerate, step 5kpps.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -272,11 +291,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 9000B frames through IPv6 forwarding in 3-node topology
+| TC12: 9000B PDR binary search - DUT IPv6 - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with partial drop rate for 9000B frames by
-| | ... | using binary search with threshold 5,000pps. Loss acceptance is set
-| | ... | to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
+| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -295,10 +314,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 78B frames through IPv6 forwarding in 3-node topology
+| TC13: 78B NDR binary search - DUT IPv6 - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 78B
-| | ... | frames by using binary search with threshold 0.1Mpps.
+| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 78 Byte frames
+| | ... | using binary search start at 10GE linerate, step 100kpps.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 78
| | ${min_rate}= | Set Variable | 100000
@@ -316,11 +336,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 78B frames through IPv6 forwarding in 3-node topology
+| TC14: 78B PDR binary search - DUT IPv6 - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 78B
-| | ... | frames by using binary search with threshold 0.1Mpps. Loss acceptance
-| | ... | is set to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 78 Byte frames
+| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 78
| | ${min_rate}= | Set Variable | 100000
@@ -340,10 +360,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 1518B frames through IPv6 forwarding in 3-node topology
+| TC15: 1518B NDR binary search - DUT IPv6 - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 1518B
-| | ... | frames by using binary search with threshold 10,000pps.
+| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 1518 Byte frames
+| | ... | using binary search start at 10GE linerate, step 10kpps.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -361,11 +382,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 1518B frames through IPv6 forwarding in 3-node topology
+| TC16: 1518B PDR binary search - DUT IPv6 - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 1518B
-| | ... | frames by using binary search with threshold 10,000pps. Loss
-| | ... | acceptance is set to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 1518 Byte frames
+| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -385,11 +406,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 4 cores and rxqueues 2 by using RFC2544 linear search and 9000B frames through IPv6 forwarding in 3-node topology
+| TC17: 9000B NDR binary search - DUT IPv6 - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 9000B
-| | ... | frames by using linear search starting at 138,580pps, stepping down
-| | ... | with step of 5,000pps.
+| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 9000 Byte frames
+| | ... | using binary search start at 10GE linerate, step 5kpps.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -406,11 +427,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 4 cores and rxqueues 2 by using RFC2544 linear search and 9000B frames through IPv6 forwarding in 3-node topology
+| TC18: 9000B PDR binary search - DUT IPv6 - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 9000B
-| | ... | frames by using binary search with threshold 5,000pps. Loss
-| | ... | acceptance is set to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 9000 Byte frames
+| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
diff --git a/tests/suites/performance/Long_Xconnect_Dot1q_Intel-X520-DA2.robot b/tests/suites/performance/Long_Xconnect_Dot1q_Intel-X520-DA2.robot
index 7b9c06ed40..23339d6031 100644
--- a/tests/suites/performance/Long_Xconnect_Dot1q_Intel-X520-DA2.robot
+++ b/tests/suites/performance/Long_Xconnect_Dot1q_Intel-X520-DA2.robot
@@ -21,25 +21,37 @@
| Suite Teardown | 3-node Performance Suite Teardown
| Test Setup | Setup all DUTs before test
| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs
-| Documentation | *Throughput search suite (based on RFC2544).*
+| Documentation | *RFC2544: Pkt throughput L2XC test cases*
| ...
-| ... | Test suite uses 3-node topology TG - DUT1 - DUT2 - TG, with one link
-| ... | between nodes. Traffic profile contain 2 L2 streams (1 stream per
-| ... | direction). Packets contain Ethernet header, IPv4 header,
-| ... | IP protocol=61 and random payload. Ethernet header MAC addresses are
-| ... | matching MAC addresses of the TG node. DUT nodes are interconnected
-| ... | with VLAN dot1q configured interfaces with VLAN 10.
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross-
+| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
+| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
+| ... | of packets transmitted. NDR and PDR are discovered for different
+| ... | Ethernet L2 frame sizes using either binary search or linear search
+| ... | algorithms with configured starting rate and final step that determines
+| ... | throughput measurement resolution. Test packets are generated by TG on
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
+| ... | payload. MAC addresses are matching MAC addresses of the TG node
+| ... | interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
| ${subid}= | 10
| ${tag_rewrite}= | pop-1
*** Test Cases ***
-| Find NDR by using RFC2544 binary search and 64B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology
+| TC01: 64B NDR binary search - DUT L2XC with dot1q - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with non drop rate by using binary search with
-| | ... | threshold 0.1Mpps. Frames from and to TG are 64B long. Tagging is
-| | ... | applied between DUTs inserting 4B VLAN ID into a packet header.
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
+| | ... | using binary search start at 10GE linerate, step 100kpps.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
| | ${framesize}= | Set Variable | 64
| | ${min_rate}= | Set Variable | 100000
@@ -65,12 +77,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR by using RFC2544 binary search and 64B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology
+| TC02: 64B PDR binary search - DUT L2XC with dot1q - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with non drop rate by using binary search with
-| | ... | threshold 0.1Mpps. Frames from and to TG are 64B long. Tagging is
-| | ... | applied between DUTs inserting 4B VLAN ID into a packet header. Loss
-| | ... | acceptance is set to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
+| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
| | ${framesize}= | Set Variable | 64
| | ${min_rate}= | Set Variable | 100000
@@ -98,11 +109,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR by using RFC2544 binary search and 1518B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology
+| TC03: 1518B NDR binary search - DUT L2XC with dot1q - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with partial drop rate by using binary search with
-| | ... | threshold 10,000pps. Frames from and to TG are 1518B long. Tagging is
-| | ... | applied between DUTs inserting 4B VLAN ID into a packet header.
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
+| | ... | using binary search start at 10GE linerate, step 10kpps.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -128,12 +139,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR by using RFC2544 binary search and 1518B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology
+| TC04: 1518B PDR binary search - DUT L2XC with dot1q - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with non drop rate by using binary search with
-| | ... | threshold 10,000pps. Frames from and to TG are 1518B long. Tagging is
-| | ... | applied between DUTs inserting 4B VLAN ID into a packet header. Loss
-| | ... | acceptance is set to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
+| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -161,11 +171,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR by using RFC2544 binary search and 9000B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology
+| TC05: 9000B NDR binary search - DUT L2XC with dot1q - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with non drop rate by using binary search with
-| | ... | threshold 5,000pps. Frames from and to TG are 9000B long. Tagging is
-| | ... | applied between DUTs inserting 4B VLAN ID into a packet header.
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
+| | ... | using binary search start at 10GE linerate, step 5kpps.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -190,12 +200,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR by using RFC2544 binary search and 9000B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology
+| TC06: 9000B PDR binary search - DUT L2XC with dot1q - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with partial drop rate by using binary search with
-| | ... | threshold 5,000pps. Frames from and to TG are 9000B long. Tagging is
-| | ... | applied between DUTs inserting 4B VLAN ID into a packet header. Loss
-| | ... | acceptance is set to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
+| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -222,11 +231,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 64B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology
+| TC07: 64B NDR binary search - DUT L2XC with dot1q - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with non drop rate by using binary search
-| | ... | with threshold 0.1Mpps. Frames from and to TG are 64B long. Tagging
-| | ... | is applied between DUTs inserting 4B VLAN ID into a packet header.
+| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
+| | ... | using binary search start at 10GE linerate, step 100kpps.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 64
| | ${min_rate}= | Set Variable | 100000
@@ -252,12 +261,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 64B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology
+| TC08: 64B PDR binary search - DUT L2XC with dot1q - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with partial drop rate by using binary
-| | ... | search with threshold 0.1Mpps. Frames from and to TG are 64B long.
-| | ... | Tagging is applied between DUTs inserting 4B VLAN ID into a packet
-| | ... | header. Loss acceptance is set to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
+| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 64
| | ${min_rate}= | Set Variable | 100000
@@ -285,12 +293,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 1518B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology
+| TC09: 1518B NDR binary search - DUT L2XC with dot1q - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with non drop rate by using binary search
-| | ... | with threshold 10,000pps. Frames from and to TG are 1518B long.
-| | ... | Tagging is applied between DUTs inserting 4B VLAN ID into a packet
-| | ... | header.
+| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
+| | ... | using binary search start at 10GE linerate, step 10kpps.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -316,12 +323,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 1518B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology
+| TC10: 1518B PDR binary search - DUT L2XC with dot1q - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with partial drop rate by using binary
-| | ... | search with threshold 10,000pps. Frames from and to TG are 1518B long.
-| | ... | Tagging is applied between DUTs inserting 4B VLAN ID into a packet
-| | ... | header. Loss acceptance is set to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
+| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -349,12 +355,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 9000B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology
+| TC11: 9000B NDR binary search - DUT L2XC with dot1q - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with non drop rate by using binary search
-| | ... | with threshold 5,000pps. Frames from and to TG are 9000B long.
-| | ... | Tagging is applied between DUTs inserting 4B VLAN ID into a packet
-| | ... | header.
+| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
+| | ... | using binary search start at 10GE linerate, step 5kpps.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -379,12 +384,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 9000B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology
+| TC12: 9000B PDR binary search - DUT L2XC with dot1q - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with partial drop rate by using binary
-| | ... | search with threshold 5,000pps. Frames from and to TG are 9000B long.
-| | ... | Tagging is applied between DUTs inserting 4B VLAN ID into a packet
-| | ... | header. Loss acceptance is set to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
+| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -411,12 +415,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 64B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology
+| TC13: 64B NDR binary search - DUT L2XC with dot1q - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate by using
-| | ... | binary search with threshold 0.1Mpps. Frames from and to TG are 64B
-| | ... | long. Tagging is applied between DUTs inserting 4B VLAN ID into a
-| | ... | packet header.
+| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames
+| | ... | using binary search start at 10GE linerate, step 100kpps.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 64
| | ${min_rate}= | Set Variable | 100000
@@ -442,13 +445,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 64B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology
+| TC14: 64B PDR binary search - DUT L2XC with dot1q - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate by using
-| | ... | binary search with threshold 0.1Mpps. Frames from and to TG are 64B
-| | ... | long. Tagging is applied between DUTs inserting 4B VLAN ID into a
-| | ... | packet header. Loss acceptance is set to 0.5 percent of transmitted
-| | ... | packets.
+| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames
+| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 64
| | ${min_rate}= | Set Variable | 100000
@@ -476,12 +477,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 1518B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology
+| TC15: 1518B NDR binary search - DUT L2XC with dot1q - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate by using
-| | ... | binary search with threshold 10,000pps. Frames from and to TG are
-| | ... | 1518B long. Tagging is applied between DUTs inserting 4B VLAN ID into
-| | ... | a packet header.
+| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 1518 Byte frames
+| | ... | using binary search start at 10GE linerate, step 10kpps.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -507,13 +507,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 1518B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology
+| TC16: 1518B PDR binary search - DUT L2XC with dot1q - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate by using
-| | ... | binary search with threshold 10,000pps. Frames from and to TG are
-| | ... | 1518B long. Tagging is applied between DUTs inserting 4B VLAN ID into
-| | ... | a packet header. Loss acceptance is set to 0.5 percent of transmitted
-| | ... | packets.
+| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 1518 Byte frames
+| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -541,12 +539,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 9000B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology
+| TC17: 9000B NDR binary search - DUT L2XC with dot1q - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate by using
-| | ... | binary search with threshold 5,000pps. Frames from and to TG are
-| | ... | 9000B long. Tagging is applied between DUTs inserting 4B VLAN ID into
-| | ... | a packet header.
+| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 9000 Byte frames
+| | ... | using binary search start at 10GE linerate, step 5kpps.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -571,13 +568,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 9000B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology
+| TC18: 9000B PDR binary search - DUT L2XC with dot1q - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate by using
-| | ... | binary search with threshold 5,000pps. Frames from and to TG are
-| | ... | 9000B long. Tagging is applied between DUTs inserting 4B VLAN ID into
-| | ... | a packet header. Loss acceptance is set to 0.5 percent of transmitted
-| | ... | packets.
+| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 9000 Byte frames
+| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
diff --git a/tests/suites/performance/Long_Xconnect_Intel-X520-DA2.robot b/tests/suites/performance/Long_Xconnect_Intel-X520-DA2.robot
index fe6da8e4c0..b01b5ef93d 100644
--- a/tests/suites/performance/Long_Xconnect_Intel-X520-DA2.robot
+++ b/tests/suites/performance/Long_Xconnect_Intel-X520-DA2.robot
@@ -22,19 +22,33 @@
| Suite Teardown | 3-node Performance Suite Teardown
| Test Setup | Setup all DUTs before test
| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs
-| Documentation | *Throughput search suite (based on RFC2544).*
+| Documentation | *RFC2544: Pkt throughput L2XC test cases*
| ...
-| ... | Test suite uses 3-node topology TG - DUT1 - DUT2 - TG, with one link
-| ... | between nodes. Traffic profile contain 2 L2 streams (1 stream per
-| ... | direction). Packets contain Ethernet header, IPv4 header,
-| ... | IP protocol=61 and random payload. Ethernet header MAC addresses are
-| ... | matching MAC addresses of the TG node.
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross-
+| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
+| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
+| ... | of packets transmitted. NDR and PDR are discovered for different
+| ... | Ethernet L2 frame sizes using either binary search or linear search
+| ... | algorithms with configured starting rate and final step that determines
+| ... | throughput measurement resolution. Test packets are generated by TG on
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
+| ... | payload. MAC addresses are matching MAC addresses of the TG node
+| ... | interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Test Cases ***
-| Find NDR by using RFC2544 binary search and 64B frames through L2 cross connect in 3-node topology
+| TC01: 64B NDR binary search - DUT L2XC - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with non drop rate for 64B frames by using
-| | ... | binary search with threshold 0.1Mpps.
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
+| | ... | using binary search start at 10GE linerate, step 100kpps.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
| | ${framesize}= | Set Variable | 64
| | ${min_rate}= | Set Variable | 100000
@@ -52,11 +66,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR by using RFC2544 binary search and 64B frames through L2 cross connect in 3-node topology
+| TC02: 64B PDR binary search - DUT L2XC - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with partial drop rate for 64B frames by using
-| | ... | binary search with threshold 0.1Mpps. Loss acceptance is set to 0.5
-| | ... | percent of transmitted packets.
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
+| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
| | ${framesize}= | Set Variable | 64
| | ${min_rate}= | Set Variable | 100000
@@ -76,10 +90,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR by using RFC2544 binary search and 1518B frames through L2 cross connect in 3-node topology
+| TC03: 1518B NDR binary search - DUT L2XC - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with non drop rate for 1518B frames by using
-| | ... | binary search with threshold 10,000pps.
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
+| | ... | using binary search start at 10GE linerate, step 10kpps.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -97,11 +112,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR by using RFC2544 binary search and 1518B frames through L2 cross connect in 3-node topology
+| TC04: 1518B PDR binary search - DUT L2XC - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with partial drop rate for 1518B frames by using
-| | ... | binary search with threshold 10,000pps. Loss acceptance is set to 0.5
-| | ... | percent of transmitted packets.
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
+| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -121,10 +136,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR by using RFC2544 binary search and 9000B frames through L2 cross connect in 3-node topology
+| TC05: 9000B NDR binary search - DUT L2XC - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with non drop rate for 9000B frames by using
-| | ... | binary search with threshold 5000pps.
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
+| | ... | using binary search start at 10GE linerate, step 5kpps.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -141,11 +157,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR by using RFC2544 binary search and 9000B frames through L2 cross connect in 3-node topology
+| TC06: 9000B PDR binary search - DUT L2XC - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with partial drop rate for 9000B frames by using
-| | ... | binary search with threshold of 5,000pps. Loss acceptance is set to
-| | ... | 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
+| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -164,10 +180,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 64B frames through L2 cross connect in 3-node topology
+| TC07: 64B NDR binary search - DUT L2XC - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with non drop rate for 64B frames by using
-| | ... | binary search with threshold 0.1Mpps.
+| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
+| | ... | using binary search start at 10GE linerate, step 100kpps.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 64
| | ${min_rate}= | Set Variable | 100000
@@ -185,11 +202,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 64B frames through L2 cross connect in 3-node topology
+| TC08: 64B PDR binary search - DUT L2XC - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with partial drop rate for 64B frames by
-| | ... | using binary search with threshold 0.1Mpps. Loss acceptance is set to
-| | ... | 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
+| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 64
| | ${min_rate}= | Set Variable | 100000
@@ -209,10 +226,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 1518B frames through L2 cross connect in 3-node topology
+| TC09: 1518B NDR binary search - DUT L2XC - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with non drop rate for 1518B frames by
-| | ... | using binary search with threshold 10,000pps.
+| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
+| | ... | using binary search start at 10GE linerate, step 10kpps.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -230,11 +248,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 1518B frames through L2 cross connect in 3-node topology
+| TC10: 1518B PDR binary search - DUT L2XC - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with partial drop rate for 1518B frames by
-| | ... | using binary search with threshold 10,000pps. Loss acceptance is set
-| | ... | to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
+| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -254,10 +272,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 9000B frames through L2 cross connect in 3-node topology
+| TC11: 9000B NDR binary search - DUT L2XC - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with non drop rate for 9000B frames by
-| | ... | using binary search with threshold 5,000pps.
+| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
+| | ... | using binary search start at 10GE linerate, step 5kpps.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -274,11 +293,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 9000B frames through L2 cross connect in 3-node topology
+| TC12: 9000B PDR binary search - DUT L2XC - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with partial drop rate for 9000B frames by
-| | ... | using binary search with threshold 5,000pps. Loss acceptance is set
-| | ... | to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
+| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -297,10 +316,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 64B frames through L2 cross connect in 3-node topology
+| TC13: 64B NDR binary search - DUT L2XC - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 64B
-| | ... | frames by using binary search with threshold 0.1Mpps.
+| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames
+| | ... | using binary search start at 10GE linerate, step 100kpps.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 64
| | ${min_rate}= | Set Variable | 100000
@@ -318,11 +338,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 64B frames through L2 cross connect in 3-node topology
+| TC14: 64B PDR binary search - DUT L2XC - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 64B
-| | ... | frames by using binary search with threshold 0.1Mpps. Loss acceptance
-| | ... | is set to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames
+| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 64
| | ${min_rate}= | Set Variable | 100000
@@ -342,10 +362,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 1518B frames through L2 cross connect in 3-node topology
+| TC15: 1518B NDR binary search - DUT L2XC - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 1518B
-| | ... | frames by using binary search with threshold 10,000pps.
+| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 1518 Byte frames
+| | ... | using binary search start at 10GE linerate, step 10kpps.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -363,11 +384,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 1518B frames through L2 cross connect in 3-node topology
+| TC16: 1518B PDR binary search - DUT L2XC - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 1518B
-| | ... | frames by using binary search with threshold 10,000pps. Loss
-| | ... | acceptance is set to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 1518 Byte frames
+| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -387,10 +408,11 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 9000B frames through L2 cross connect in 3-node topology
+| TC17: 9000B NDR binary search - DUT L2XC - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 9000B frames by
-| | ... | using binary search with threshold 5,000pps.
+| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 9000 Byte frames
+| | ... | using binary search start at 10GE linerate, step 5kpps.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -407,11 +429,11 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 9000B frames through L2 cross connect in 3-node topology
+| TC18: 9000B PDR binary search - DUT L2XC - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 9000B
-| | ... | frames by using binary search with threshold 5,000pps. Loss
-| | ... | acceptance is set to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 9000 Byte frames
+| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000