diff options
author | Yulong Pei <yulong.pei@intel.com> | 2022-09-15 12:06:20 +0800 |
---|---|---|
committer | Peter Mikus <peter.mikus@protonmail.ch> | 2022-09-30 12:01:12 +0000 |
commit | 73354f8561599422a955a7ba5283968910d633f5 (patch) | |
tree | 5ec392222339715b5a40bf78954cc09863954b8e /GPL | |
parent | 88fd39d9e8fa45f973fc9cadfca1728dc8f6e336 (diff) |
Add wireguard multiple tunnels test suites
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
Change-Id: I7abd546e67fdbe481b204bb6a1ec7e9c654dcdae
Diffstat (limited to 'GPL')
6 files changed, 920 insertions, 0 deletions
diff --git a/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src1000ip4dst1000.py b/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src1000ip4dst1000.py new file mode 100644 index 0000000000..667d4eccdc --- /dev/null +++ b/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src1000ip4dst1000.py @@ -0,0 +1,165 @@ +# Copyright (c) 2022 Intel and/or its affiliates. +# +# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later +# +# Licensed under the Apache License 2.0 or +# GNU General Public License v2.0 or later; you may not use this file +# except in compliance with one of these Licenses. You +# may obtain a copy of the Licenses at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# https://www.gnu.org/licenses/old-licenses/gpl-2.0-standalone.html +# +# Note: If this file is linked with Scapy, which is GPLv2+, your use of it +# must be under GPLv2+. If at any point in the future it is no longer linked +# with Scapy (or other GPLv2+ licensed software), you are free to choose +# Apache 2. +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Stream profile for T-rex traffic generator. + +Stream profile: + - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time. + - Packet: ETH / IP / + - Direction 0 --> 1: + - Source IP address range: 10.0.0.0 - 10.3.231.0 + - Destination IP address range: 20.0.0.0 - 20.3.231.0 + - Direction 1 --> 0: + - Source IP address range: 20.0.0.0 - 20.3.231.0 + - Destination IP address range: 10.0.0.0 - 10.3.231.0 +""" + +from trex.stl.api import * +from profile_trex_stateless_base_class import TrafficStreamsBaseClass + +class TrafficStreams(TrafficStreamsBaseClass): + """Stream profile.""" + + def __init__(self): + """Initialization and setting of streams' parameters.""" + + super(TrafficStreamsBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = u"10.0.0.0" + self.p1_src_end_ip = u"10.3.231.0" + + self.p1_dst_start_ip = u"20.0.0.0" + self.p1_dst_end_ip = u"20.3.231.0" + + self.p2_src_start_ip = u"20.0.0.0" + self.p2_src_end_ip = u"20.3.231.0" + + self.p2_dst_start_ip = u"10.0.0.0" + self.p2_dst_end_ip = u"10.3.231.0" + + def define_packets(self): + """Defines the packets to be sent from the traffic generator. + + Packet definition: | ETH | IP | + + :returns: Packets to be sent from the traffic generator. + :rtype: tuple + """ + + # Direction 0 --> 1 + base_pkt_a = ( + Ether() / + IP( + src=self.p1_src_start_ip, + dst=self.p1_dst_start_ip, + proto=61 + ) + ) + # Direction 1 --> 0 + base_pkt_b = ( + Ether() / + IP( + src=self.p2_src_start_ip, + dst=self.p2_dst_start_ip, + proto=61 + ) + ) + + # Direction 0 --> 1 + vm1 = STLScVmRaw( + [ + STLVmFlowVar( + name=u"ip_src", + min_value=self.p1_src_start_ip, + max_value=self.p1_src_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_src", + pkt_offset=u"IP.src" + ), + STLVmFlowVar( + name=u"ip_dst", + min_value=self.p1_dst_start_ip, + max_value=self.p1_dst_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_dst", + pkt_offset=u"IP.dst" + ), + STLVmFixIpv4( + offset=u"IP" + ) + ] + ) + # Direction 1 --> 0 + vm2 = STLScVmRaw( + [ + STLVmFlowVar( + name=u"ip_src", + min_value=self.p2_src_start_ip, + max_value=self.p2_src_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_src", + pkt_offset=u"IP.src" + ), + STLVmFlowVar( + name=u"ip_dst", + min_value=self.p2_dst_start_ip, + max_value=self.p2_dst_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_dst", + pkt_offset=u"IP.dst" + ), + STLVmFixIpv4( + offset=u"IP" + ) + ] + ) + + return base_pkt_a, base_pkt_b, vm1, vm2 + + +def register(): + """Register this traffic profile to T-rex. + + Do not change this function. + + :returns: Traffic streams. + :rtype: Object + """ + return TrafficStreams() diff --git a/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src100ip4dst100.py b/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src100ip4dst100.py new file mode 100644 index 0000000000..8d0950caed --- /dev/null +++ b/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src100ip4dst100.py @@ -0,0 +1,165 @@ +# Copyright (c) 2022 Intel and/or its affiliates. +# +# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later +# +# Licensed under the Apache License 2.0 or +# GNU General Public License v2.0 or later; you may not use this file +# except in compliance with one of these Licenses. You +# may obtain a copy of the Licenses at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# https://www.gnu.org/licenses/old-licenses/gpl-2.0-standalone.html +# +# Note: If this file is linked with Scapy, which is GPLv2+, your use of it +# must be under GPLv2+. If at any point in the future it is no longer linked +# with Scapy (or other GPLv2+ licensed software), you are free to choose +# Apache 2. +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Stream profile for T-rex traffic generator. + +Stream profile: + - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time. + - Packet: ETH / IP / + - Direction 0 --> 1: + - Source IP address range: 10.0.0.0 - 10.0.99.0 + - Destination IP address range: 20.0.0.0 - 20.0.99.0 + - Direction 1 --> 0: + - Source IP address range: 20.0.0.0 - 20.0.99.0 + - Destination IP address range: 10.0.0.0 - 10.0.99.0 +""" + +from trex.stl.api import * +from profile_trex_stateless_base_class import TrafficStreamsBaseClass + +class TrafficStreams(TrafficStreamsBaseClass): + """Stream profile.""" + + def __init__(self): + """Initialization and setting of streams' parameters.""" + + super(TrafficStreamsBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = u"10.0.0.0" + self.p1_src_end_ip = u"10.0.99.0" + + self.p1_dst_start_ip = u"20.0.0.0" + self.p1_dst_end_ip = u"20.0.99.0" + + self.p2_src_start_ip = u"20.0.0.0" + self.p2_src_end_ip = u"20.0.99.0" + + self.p2_dst_start_ip = u"10.0.0.0" + self.p2_dst_end_ip = u"10.0.99.0" + + def define_packets(self): + """Defines the packets to be sent from the traffic generator. + + Packet definition: | ETH | IP | + + :returns: Packets to be sent from the traffic generator. + :rtype: tuple + """ + + # Direction 0 --> 1 + base_pkt_a = ( + Ether() / + IP( + src=self.p1_src_start_ip, + dst=self.p1_dst_start_ip, + proto=61 + ) + ) + # Direction 1 --> 0 + base_pkt_b = ( + Ether() / + IP( + src=self.p2_src_start_ip, + dst=self.p2_dst_start_ip, + proto=61 + ) + ) + + # Direction 0 --> 1 + vm1 = STLScVmRaw( + [ + STLVmFlowVar( + name=u"ip_src", + min_value=self.p1_src_start_ip, + max_value=self.p1_src_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_src", + pkt_offset=u"IP.src" + ), + STLVmFlowVar( + name=u"ip_dst", + min_value=self.p1_dst_start_ip, + max_value=self.p1_dst_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_dst", + pkt_offset=u"IP.dst" + ), + STLVmFixIpv4( + offset=u"IP" + ) + ] + ) + # Direction 1 --> 0 + vm2 = STLScVmRaw( + [ + STLVmFlowVar( + name=u"ip_src", + min_value=self.p2_src_start_ip, + max_value=self.p2_src_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_src", + pkt_offset=u"IP.src" + ), + STLVmFlowVar( + name=u"ip_dst", + min_value=self.p2_dst_start_ip, + max_value=self.p2_dst_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_dst", + pkt_offset=u"IP.dst" + ), + STLVmFixIpv4( + offset=u"IP" + ) + ] + ) + + return base_pkt_a, base_pkt_b, vm1, vm2 + + +def register(): + """Register this traffic profile to T-rex. + + Do not change this function. + + :returns: Traffic streams. + :rtype: Object + """ + return TrafficStreams() diff --git a/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src1ip4dst1.py b/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src1ip4dst1.py new file mode 100644 index 0000000000..77a2f845c6 --- /dev/null +++ b/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src1ip4dst1.py @@ -0,0 +1,95 @@ +# Copyright (c) 2022 Intel and/or its affiliates. +# +# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later +# +# Licensed under the Apache License 2.0 or +# GNU General Public License v2.0 or later; you may not use this file +# except in compliance with one of these Licenses. You +# may obtain a copy of the Licenses at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# https://www.gnu.org/licenses/old-licenses/gpl-2.0-standalone.html +# +# Note: If this file is linked with Scapy, which is GPLv2+, your use of it +# must be under GPLv2+. If at any point in the future it is no longer linked +# with Scapy (or other GPLv2+ licensed software), you are free to choose +# Apache 2. +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Stream profile for T-rex traffic generator. + +Stream profile: + - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time. + - Packet: ETH / IP / + - Direction 0 --> 1: + - Source IP address range: 10.0.0.0 + - Destination IP address range: 20.0.0.0 + - Direction 1 --> 0: + - Source IP address range: 20.0.0.0 + - Destination IP address range: 10.0.0.0 +""" + +from trex.stl.api import * +from profile_trex_stateless_base_class import TrafficStreamsBaseClass + + +class TrafficStreams(TrafficStreamsBaseClass): + """Stream profile.""" + + def __init__(self): + """Initialization and setting of streams' parameters.""" + + super(TrafficStreamsBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_ip = u"10.0.0.0" + self.p1_dst_ip = u"20.0.0.0" + + self.p2_src_ip = u"20.0.0.0" + self.p2_dst_ip = u"10.0.0.0" + + def define_packets(self): + """Defines the packets to be sent from the traffic generator. + + Packet definition: | ETH | IP | + + :returns: Packets to be sent from the traffic generator. + :rtype: tuple + """ + + # Direction 0 --> 1 + base_pkt_a = ( + Ether() / + IP( + src=self.p1_src_ip, + dst=self.p1_dst_ip, + proto=61 + ) + ) + # Direction 1 --> 0 + base_pkt_b = ( + Ether() / + IP( + src=self.p2_src_ip, + dst=self.p2_dst_ip, + proto=61 + ) + ) + + return base_pkt_a, base_pkt_b, None, None + + +def register(): + """Register this traffic profile to T-rex. + + Do not change this function. + + :return: Traffic streams. + :rtype: Object + """ + return TrafficStreams() diff --git a/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src2ip4dst2.py b/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src2ip4dst2.py new file mode 100644 index 0000000000..59bf2054a0 --- /dev/null +++ b/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src2ip4dst2.py @@ -0,0 +1,165 @@ +# Copyright (c) 2022 Intel and/or its affiliates. +# +# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later +# +# Licensed under the Apache License 2.0 or +# GNU General Public License v2.0 or later; you may not use this file +# except in compliance with one of these Licenses. You +# may obtain a copy of the Licenses at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# https://www.gnu.org/licenses/old-licenses/gpl-2.0-standalone.html +# +# Note: If this file is linked with Scapy, which is GPLv2+, your use of it +# must be under GPLv2+. If at any point in the future it is no longer linked +# with Scapy (or other GPLv2+ licensed software), you are free to choose +# Apache 2. +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Stream profile for T-rex traffic generator. + +Stream profile: + - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time. + - Packet: ETH / IP / + - Direction 0 --> 1: + - Source IP address range: 10.0.0.0 - 10.0.1.0 + - Destination IP address range: 20.0.0.0 - 20.0.1.0 + - Direction 1 --> 0: + - Source IP address range: 20.0.0.0 - 20.0.1.0 + - Destination IP address range: 10.0.0.0 - 10.0.1.0 +""" + +from trex.stl.api import * +from profile_trex_stateless_base_class import TrafficStreamsBaseClass + +class TrafficStreams(TrafficStreamsBaseClass): + """Stream profile.""" + + def __init__(self): + """Initialization and setting of streams' parameters.""" + + super(TrafficStreamsBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = u"10.0.0.0" + self.p1_src_end_ip = u"10.0.1.0" + + self.p1_dst_start_ip = u"20.0.0.0" + self.p1_dst_end_ip = u"20.0.1.0" + + self.p2_src_start_ip = u"20.0.0.0" + self.p2_src_end_ip = u"20.0.1.0" + + self.p2_dst_start_ip = u"10.0.0.0" + self.p2_dst_end_ip = u"10.0.1.0" + + def define_packets(self): + """Defines the packets to be sent from the traffic generator. + + Packet definition: | ETH | IP | + + :returns: Packets to be sent from the traffic generator. + :rtype: tuple + """ + + # Direction 0 --> 1 + base_pkt_a = ( + Ether() / + IP( + src=self.p1_src_start_ip, + dst=self.p1_dst_start_ip, + proto=61 + ) + ) + # Direction 1 --> 0 + base_pkt_b = ( + Ether() / + IP( + src=self.p2_src_start_ip, + dst=self.p2_dst_start_ip, + proto=61 + ) + ) + + # Direction 0 --> 1 + vm1 = STLScVmRaw( + [ + STLVmFlowVar( + name=u"ip_src", + min_value=self.p1_src_start_ip, + max_value=self.p1_src_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_src", + pkt_offset=u"IP.src" + ), + STLVmFlowVar( + name=u"ip_dst", + min_value=self.p1_dst_start_ip, + max_value=self.p1_dst_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_dst", + pkt_offset=u"IP.dst" + ), + STLVmFixIpv4( + offset=u"IP" + ) + ] + ) + # Direction 1 --> 0 + vm2 = STLScVmRaw( + [ + STLVmFlowVar( + name=u"ip_src", + min_value=self.p2_src_start_ip, + max_value=self.p2_src_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_src", + pkt_offset=u"IP.src" + ), + STLVmFlowVar( + name=u"ip_dst", + min_value=self.p2_dst_start_ip, + max_value=self.p2_dst_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_dst", + pkt_offset=u"IP.dst" + ), + STLVmFixIpv4( + offset=u"IP" + ) + ] + ) + + return base_pkt_a, base_pkt_b, vm1, vm2 + + +def register(): + """Register this traffic profile to T-rex. + + Do not change this function. + + :returns: Traffic streams. + :rtype: Object + """ + return TrafficStreams() diff --git a/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src4ip4dst4.py b/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src4ip4dst4.py new file mode 100644 index 0000000000..7eb661d610 --- /dev/null +++ b/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src4ip4dst4.py @@ -0,0 +1,165 @@ +# Copyright (c) 2022 Intel and/or its affiliates. +# +# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later +# +# Licensed under the Apache License 2.0 or +# GNU General Public License v2.0 or later; you may not use this file +# except in compliance with one of these Licenses. You +# may obtain a copy of the Licenses at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# https://www.gnu.org/licenses/old-licenses/gpl-2.0-standalone.html +# +# Note: If this file is linked with Scapy, which is GPLv2+, your use of it +# must be under GPLv2+. If at any point in the future it is no longer linked +# with Scapy (or other GPLv2+ licensed software), you are free to choose +# Apache 2. +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Stream profile for T-rex traffic generator. + +Stream profile: + - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time. + - Packet: ETH / IP / + - Direction 0 --> 1: + - Source IP address range: 10.0.0.0 - 10.0.3.0 + - Destination IP address range: 20.0.0.0 - 20.0.3.0 + - Direction 1 --> 0: + - Source IP address range: 20.0.0.0 - 20.0.3.0 + - Destination IP address range: 10.0.0.0 - 10.0.3.0 +""" + +from trex.stl.api import * +from profile_trex_stateless_base_class import TrafficStreamsBaseClass + +class TrafficStreams(TrafficStreamsBaseClass): + """Stream profile.""" + + def __init__(self): + """Initialization and setting of streams' parameters.""" + + super(TrafficStreamsBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = u"10.0.0.0" + self.p1_src_end_ip = u"10.0.3.0" + + self.p1_dst_start_ip = u"20.0.0.0" + self.p1_dst_end_ip = u"20.0.3.0" + + self.p2_src_start_ip = u"20.0.0.0" + self.p2_src_end_ip = u"20.0.3.0" + + self.p2_dst_start_ip = u"10.0.0.0" + self.p2_dst_end_ip = u"10.0.3.0" + + def define_packets(self): + """Defines the packets to be sent from the traffic generator. + + Packet definition: | ETH | IP | + + :returns: Packets to be sent from the traffic generator. + :rtype: tuple + """ + + # Direction 0 --> 1 + base_pkt_a = ( + Ether() / + IP( + src=self.p1_src_start_ip, + dst=self.p1_dst_start_ip, + proto=61 + ) + ) + # Direction 1 --> 0 + base_pkt_b = ( + Ether() / + IP( + src=self.p2_src_start_ip, + dst=self.p2_dst_start_ip, + proto=61 + ) + ) + + # Direction 0 --> 1 + vm1 = STLScVmRaw( + [ + STLVmFlowVar( + name=u"ip_src", + min_value=self.p1_src_start_ip, + max_value=self.p1_src_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_src", + pkt_offset=u"IP.src" + ), + STLVmFlowVar( + name=u"ip_dst", + min_value=self.p1_dst_start_ip, + max_value=self.p1_dst_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_dst", + pkt_offset=u"IP.dst" + ), + STLVmFixIpv4( + offset=u"IP" + ) + ] + ) + # Direction 1 --> 0 + vm2 = STLScVmRaw( + [ + STLVmFlowVar( + name=u"ip_src", + min_value=self.p2_src_start_ip, + max_value=self.p2_src_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_src", + pkt_offset=u"IP.src" + ), + STLVmFlowVar( + name=u"ip_dst", + min_value=self.p2_dst_start_ip, + max_value=self.p2_dst_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_dst", + pkt_offset=u"IP.dst" + ), + STLVmFixIpv4( + offset=u"IP" + ) + ] + ) + + return base_pkt_a, base_pkt_b, vm1, vm2 + + +def register(): + """Register this traffic profile to T-rex. + + Do not change this function. + + :returns: Traffic streams. + :rtype: Object + """ + return TrafficStreams() diff --git a/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src8ip4dst8.py b/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src8ip4dst8.py new file mode 100644 index 0000000000..1db7715ca8 --- /dev/null +++ b/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src8ip4dst8.py @@ -0,0 +1,165 @@ +# Copyright (c) 2022 Intel and/or its affiliates. +# +# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later +# +# Licensed under the Apache License 2.0 or +# GNU General Public License v2.0 or later; you may not use this file +# except in compliance with one of these Licenses. You +# may obtain a copy of the Licenses at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# https://www.gnu.org/licenses/old-licenses/gpl-2.0-standalone.html +# +# Note: If this file is linked with Scapy, which is GPLv2+, your use of it +# must be under GPLv2+. If at any point in the future it is no longer linked +# with Scapy (or other GPLv2+ licensed software), you are free to choose +# Apache 2. +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Stream profile for T-rex traffic generator. + +Stream profile: + - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time. + - Packet: ETH / IP / + - Direction 0 --> 1: + - Source IP address range: 10.0.0.0 - 10.0.7.0 + - Destination IP address range: 20.0.0.0 - 20.0.7.0 + - Direction 1 --> 0: + - Source IP address range: 20.0.0.0 - 20.0.7.0 + - Destination IP address range: 10.0.0.0 - 10.0.7.0 +""" + +from trex.stl.api import * +from profile_trex_stateless_base_class import TrafficStreamsBaseClass + +class TrafficStreams(TrafficStreamsBaseClass): + """Stream profile.""" + + def __init__(self): + """Initialization and setting of streams' parameters.""" + + super(TrafficStreamsBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = u"10.0.0.0" + self.p1_src_end_ip = u"10.0.7.0" + + self.p1_dst_start_ip = u"20.0.0.0" + self.p1_dst_end_ip = u"20.0.7.0" + + self.p2_src_start_ip = u"20.0.0.0" + self.p2_src_end_ip = u"20.0.7.0" + + self.p2_dst_start_ip = u"10.0.0.0" + self.p2_dst_end_ip = u"10.0.7.0" + + def define_packets(self): + """Defines the packets to be sent from the traffic generator. + + Packet definition: | ETH | IP | + + :returns: Packets to be sent from the traffic generator. + :rtype: tuple + """ + + # Direction 0 --> 1 + base_pkt_a = ( + Ether() / + IP( + src=self.p1_src_start_ip, + dst=self.p1_dst_start_ip, + proto=61 + ) + ) + # Direction 1 --> 0 + base_pkt_b = ( + Ether() / + IP( + src=self.p2_src_start_ip, + dst=self.p2_dst_start_ip, + proto=61 + ) + ) + + # Direction 0 --> 1 + vm1 = STLScVmRaw( + [ + STLVmFlowVar( + name=u"ip_src", + min_value=self.p1_src_start_ip, + max_value=self.p1_src_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_src", + pkt_offset=u"IP.src" + ), + STLVmFlowVar( + name=u"ip_dst", + min_value=self.p1_dst_start_ip, + max_value=self.p1_dst_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_dst", + pkt_offset=u"IP.dst" + ), + STLVmFixIpv4( + offset=u"IP" + ) + ] + ) + # Direction 1 --> 0 + vm2 = STLScVmRaw( + [ + STLVmFlowVar( + name=u"ip_src", + min_value=self.p2_src_start_ip, + max_value=self.p2_src_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_src", + pkt_offset=u"IP.src" + ), + STLVmFlowVar( + name=u"ip_dst", + min_value=self.p2_dst_start_ip, + max_value=self.p2_dst_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_dst", + pkt_offset=u"IP.dst" + ), + STLVmFixIpv4( + offset=u"IP" + ) + ] + ) + + return base_pkt_a, base_pkt_b, vm1, vm2 + + +def register(): + """Register this traffic profile to T-rex. + + Do not change this function. + + :returns: Traffic streams. + :rtype: Object + """ + return TrafficStreams() |