CSIT-1420: Split methodology section to more files

Change-Id: I861e578434abdf72244d684fca8cfd66e1db9c28
Signed-off-by: Tibor Frank <tifrank@cisco.com>

1 files changed, 43 insertions, 0 deletions

diff --git a/docs/report/introduction/methodology_vpp_startup_settings.rst b/docs/report/introduction/methodology_vpp_startup_settings.rst
new file mode 100644
index 0000000000..16185b4c05
--- /dev/null
+++ b/docs/report/introduction/methodology_vpp_startup_settings.rst
@@ -0,0 +1,43 @@
+VPP Startup Settings
+--------------------
+
+CSIT code manipulates a number of VPP settings in startup.conf for optimized
+performance. List of common settings applied to all tests and test
+dependent settings follows.
+
+See `VPP startup.conf`_
+for a complete set and description of listed settings.
+
+Common Settings
+~~~~~~~~~~~~~~~
+
+List of vpp startup.conf settings applied to all tests:
+
+#. heap-size <value> - set separately for ip4, ip6, stats, main
+   depending on scale tested.
+#. no-tx-checksum-offload - disables UDP / TCP TX checksum offload in DPDK.
+   Typically needed for use faster vector PMDs (together with
+   no-multi-seg).
+#. socket-mem <value>,<value> - memory per numa. (Not required anymore
+   due to VPP code changes, should be removed in CSIT-18.10.)
+
+Per Test Settings
+~~~~~~~~~~~~~~~~~
+
+List of vpp startup.conf settings applied dynamically per test:
+
+#. corelist-workers <list_of_cores> - list of logical cores to run VPP
+   worker data plane threads. Depends on HyperThreading and core per
+   test configuration.
+#. num-rx-queues <value> - depends on a number of VPP threads and NIC
+   interfaces.
+#. num-rx-desc/num-tx-desc - number of rx/tx descriptors for specific
+   NICs, incl. xl710, x710, xxv710.
+#. num-mbufs <value> - increases number of buffers allocated, needed
+   only in scenarios with large number of interfaces and worker threads.
+   Value is per CPU socket. Default is 16384.
+#. no-multi-seg - disables multi-segment buffers in DPDK, improves
+   packet throughput, but disables Jumbo MTU support. Disabled for all
+   tests apart from the ones that require Jumbo 9000B frame support.
+#. UIO driver - depends on topology file definition.
+#. QAT VFs - depends on NRThreads, each thread = 1QAT VFs.